Finally, the DJI Mini 3 Pro has Master Airscrew Props!

These new props look great and are actually quieter in flight. To install, the installation manual is shown below these links:
-You can find them here: bit.ly/3EotbY6
-You can find the INSTA360 GO2 Camera here: www.insta360.c...
-You can find the DJI MINI 3 PRO Drone here: amzn.to/3E12DL8
PROP INSTALLATION MANUAL: www.masterairs...
****************************************************
BELOW IS THE GEAR I USE TO CREATE MY VIDEOS:
THE SOFTWARE I USE TO EDIT MY VIDEOS IS FINAL CUT PRO X
A-ROLL CAMERAS (without lenses):
Canon C70: amzn.to/3wnJzod
DJI RONIN 4D: www.bhphotovid...
Canon EOS R: amzn.to/2W0qPq9
Canon M6 MkII: amzn.to/2n0ISiO
Canon XC-10: amzn.to/3sb9YTV
B-ROLL CAMERAS:
DJI OSMO ACTION 2: click.dji.com/...
INSTA360 X3: www.insta360.c...
INSTA360 ONE R: store.insta360...
INSTA360 GO2: www.insta360.c...
INSTA360 GO: www.insta360.c...
GOPRO HERO 11 (USA): amzn.to/3DKgAwy
GOPRO HERO 11 (CANADA): amzn.to/3E2SXAX
GOPRO HERO 10 (USA): amzn.to/3zIvWxM
GOPRO HERO 10 (CANADA): amzn.to/3EUzXmn
GOPRO HERO 9 (USA): amzn.to/3dlZasS
GOPRO HERO 9 (CANADA): amzn.to/30Ttmq2
GOPRO HERO 8 (USA): amzn.to/31BWboJ
GOPRO HERO 8 (CANADA): amzn.to/2MYs5WX
GOPRO HERO 7 (USA): amzn.to/2XXqeWv
GOPRO HERO 7 (CANADA): amzn.to/2Xjq6Vr
MOBILE OSMO POCKET2: click.dji.com/...
ACTION CAMERA 3 AXIS GIMBAL: amzn.to/2DCrTJj
SOUND AUDIO:
TASCAM MOBILE AUDIO RECORDER (USA): amzn.to/2IKMr6n
TASCAM MOBILE AUDIO RECORDER (CANADA): amzn.to/2p3mExN
TENTACLE TRACK E: (CANADA): amzn.to/3rO11xY
TENTACLE TRACK E: (USA): www.bhphotovid...
ZOOM MOBILE AUDIO RECORDER (USA): amzn.to/3bHzh86
ZOOM MOBILE AUDIO RECORDER (CANADA): amzn.to/3sqFA5A
RODE STUDIO BOOM MIC (USA): amzn.to/2LqTzrL
RODE STUDIO BOOM MIC (CANADA): amzn.to/2XIX3s6
STUDIO VOICE OVER MIC: amzn.to/2TlTjJt
RODE WIRELESS: amzn.to/2LS2nqp
LIGHTING:
STUDIO LIGHTING (USA): GVM: amzn.to/35HcV2K
STUDIO LIGHTING (CANADA): GVM: amzn.to/3bG0kAD
STUDIO LIGHTING: FalconEyes SO-40TD: amzn.to/2N9pp7J
OTHER CAMERA GEAR:
Action Camera Hat (USA): amzn.to/2OFz5Hu
Action Camera Hat (CANADA): amzn.to/2NwT7Zh
Gorillapod 5K Tripod (AMAZON USA): amzn.to/368TFtH
Gorillapod 5K Tripod (AMAZON CANADA): amzn.to/2Tg3G39
Cool Orange Mini Tripod (AMAZON CANADA): amzn.to/2Xk5vNV
Cool Orange Mini Tripod (AMAZON USA): amzn.to/2X4JYsn
DRONE ACCESSORIES:
Lipo Batteries I use on most FPV Drones: genstattu.osit...
Round Landing Pad: amzn.to/2HBqp2w
Square Landing Pad PRO SMALL (USA): amzn.to/3e9Us2c
Square Landing Pad PRO SMALL (CANADA): amzn.to/3BQou5Y
Square Landing Pad LARGE: amzn.to/2nukqqH
================
#DJIMINI3 #Propellers #masterairscrew #Stealth #captaindrone

[@scottthomas8136]

So it turns out that the Master Airscrew factory Is lass than a mile away from my office. Every time a new prop comes out, I walk over at lunchtime and don’t have to pay for shipping. I feel blessed.

[@CAPTAINDRONE798]

Lucky guy!

[@GarethFinlay]

Don't suppose you can ask them when they coming to the uk

[@dji1tommy29]

Nice!

[@TedNemeth]

Ha! That’s amazing. Where are they located? I’m going to do a full test episode on these. Fly safe.

[@Ezio470]

and i live on the other side of the world. shipping estimate is around $20 alone for me lol

[@briandolson2941]

The Mini 3 is already pretty quiet, but the MA's do seem slightly quieter (maybe just lower pitch). Do look good! 👍

[@noonespecific9463]

You make the coolest videos! I have 4 different colors on my mini 2, I will consider buying a mini 3 now, master air screw made props for it! The mini 2 is the 5th DJI drone I have used MAS props on, they are worth the cost in my opinion. That lower pitch is a result of more efficient props, producing the same lift at less rpm’s, this equals less stress on motors and they run noticeably cooler. No , I do not work for MAS, they just make fabulous props! The Captain also makes fabulous videos!

[@CAPTAINDRONE798]

Thank you for the comments.

[@synthyawylder3297]

It would be great to have a comparison including decibels & frequencies; what I heard was only a slight difference in tone, but no difference in actual sound level. Also, a size comparison, length, width, angle & pitch twist, & also, blade area.

[@waldoiswhere]

I have watched many videos on the Master Airscrew props for the DJI Mini series and even reviewed two sets and basically the best thing that can be said is that they 'look cool.' Noisier, not as well finished, more expensive than OEM DJI propellers, that doesn't leave much room for positive feedback. Oh , and the 'cool' factor disappears as soon as the Mini 3 is out of range of hearing.

[@kevinforth7618]

Agreed. I have the Master Airscrew props on my Mini 3 Pro, and haven't noticed any real difference. I realize this is totally subjective, but to me, the green props made my drone look more like a toy, so I replaced them with the Master Airscrew black props. As noted above, they are not well finished, with extra casting material at some edges. No noticeable difference in sound or performance. The original DJI props, with the orange-edged tips, look nicer, in my opinion.

[@waldoiswhere]

@@kevinforth7618 I removed the MA props on both the Mini 2 and Mini 3 Pro. I am sure glad I did not have to pay for them! They are not up to par on either the DJI OEM props or MA's own wood scale propellers. I know Capt Drone said a lot about the color, but once airborne above the 1 - 3 meters that he flew during the review, you really can't see the colors at all. Unfortunately, even the cheap chinese clone props for the Mini 3 seem to work as good as these and they are incredibly cheap. I only use the DJI OEM props and only used the cheap chinese props to do a review of them. I have told all my drone friends to not bother with any of the MA props for DJI. As it stands, two sets for two different drone models and MA hasn't addressed any of the issues. I know that is a small sample size but these were retail packaged props from an authorized seller not cherry picked by MA, so I don't think anyone would get a set that are any different than the ones I received.

[@ptolamaustittan]

Excellent why not clear ones . So it looks like it magic .

[@worldofnateg]

I JUST installed the orange props on my mini 3 pro a few days ago. I’m on the same page as you. They’re esthetically pleasing, but no change in performance.

[@paulfagan2964]

I have used Master Airscrew Props on all my DJI drones and I love them. Thanks for the review! Great camera shots. The colors are spectacular.

[@AmjadKhan-cm5sm]

Dji is king in the drone industry, nobody can beat them.

[@Roboticdoughbull3k]

No 💩 Amjad, no 💩. How very observant of you.

[@bernardchambers6923]

The standard props appear to be in G minor while the Master Airscrew props are G major. Minor keys sound sad while major keys are happy. With the new props, your drone sounds happier! 😁😁😁

[@CAPTAINDRONE798]

I will listen for it on SPOTIFY :-)

[@Goldchucker1]

What?

[@Dartheomus]

I prefer the look and sound of the stock blades, but the bright color would make hand-catching the drone a little bit easier.

[@EastAngliaUK]

they look cool my dog loves to chase the drone he was really going fast yesterday LOL gave him a good work out

[@Over_the_Hill]

I'm glad I watched this, other than slightly lower pitch I'm not seeing a reason to spend £22 which is what they cost here in UK. Thanks for taking the time to test these blades

[@Wren1]

I'd love to have some orange props for my orange Nano+.

[@nolarocks]

He's alive!!! I can't believe it. I heard your voice and recognized you immediately. Was worried about ya. (Strums an A chord)

[@RCnerd74]

Thanks for sharing. Would prefer the Airscrew props just because of the visibility. And the cool look🤩

[@mrvang8077]

Just got my first dji mini 3 pro last week from Best Buy. I almost bought the mini 2 because I didn't know that dji came out with a newer mini drone that was on the display right next to the mini 2. The new mini 3 pro has all the check mark on my list in terms of feature I been wanting so I oughted for new mini 3 pro over the mini 2. It's very quiet and above all it has all the features I wanted in a compact mini drone.

[@MrNAMASTE1968]

Fun video. I'd like to see more footage from the rear. It just looks different.

[@Hoodeene]

thanks for the Instal video. I saw a little jello by the flight test with the Insta Cam. is it also present with the stock prop? Would be interesitng

[@lanelebaron]

Man I want that drone. Still rocking my Spark!

[@georgekelly1948]

Fun test and review. Cheers from Wisconsin, bud.

[@rudihariadi25]

cool frame eyeglass,. can you tell me the brand and type,. thx

[@ModernDayTemplar606]

They definitely look and sound great.

[@bobbylefebvre6298]

Enjoy the the weekend

[@austrekie]

Purchase these Props, however 2 x screws broke, 1 screw thread stuck in Prop Holder, Screw Head appears weaker than Original DJI had to send Drone to DJI for repair, as unable to retrieve thread of screw. So be ware, no excessive force used, and original DJI screwdriver used. Have also contacted MA, waiting on response. Had MA before for my other drones, and had no issues.

[@marchiand59]

I confirm the low quality of the screws. I broke 3 just by unscrewing them. I've never had any problems with the original screws. Unfortunately there is no possibility to remove them and I had to change 2 rear arms! The props are still valid

[@austrekie]

@@marchiand59 Now very sceptical of purchasing MA props for the Mini 3 Pro, MA have now indicated to me that the latest version of the Prop screws have been fixed, strengthened ! Currently not taking any risk and staying with the original DJI Props. Damaged Propeller motor has been replaced. Will wait a while if I decide to purchase Props from MA. Props for my other DJI Drones from MA have not been an issue.

[@LuongMga]

These props show that DJI outdone themselves with the Mini 3 because the props doesn't make it any better in term of performance. Master Airscrew's advertising materials can't claim an actual number of X minutes more flight time, the sound pitch to me isn't any better. However, these props actually look very cool.

[@CAPTAINDRONE798]

They claim an extra minute of flight time

[@Indpendent01]

@@CAPTAINDRONE798 i think @LuongMga means is that that extra minute is irrelevant, also within error tolerance, but at least they are ON-PAR and not negative performance so it makes sense to advertise that fact, even if saying +1 minute is silly

[@paul5276]

because of this video. I purchased master airscrew props. In a year of owning a mini2 I broke 1 prop. On the 3 rd flight with the master air screws. I nicked peace’s out of 3 of them. It still flys. They are very hard that makes them brittle. Not sure I’ll buy again.

[@twistedfireman]

Ordered a few sets for my drone too. Thank you Steve for the review.

[@CAPTAINDRONE798]

Very welcome

[@adventureben22]

Funny how they call them "stealth" props and promptly make them in fluorescent colours. 😆 They do look good, though. I can see some ethical considerations, but maybe the "dog test" should become part of your standard repertoire!

[@JonR35]

Maybe it was me, but on my mini 2 the MAS Props are a lot louder and went back to stock, now on my a2s the Mas do great

[@user-cz2ss4ng6s]

Video looks good Steve and of coarse since you showed me these I ordered a set. Btw I have mini 3 and tuned my sport mode to extreme and man it rips. Try It you will be surprised how fast that drone really is.

[@richardhykes6939]

If had that done it would be nice. Good video

[@Seerwealth]

The video ONE & ONLY - SKIPPER- on youtube can master together in outstanding fashion. Also fashionable, lol..

[@Seerwealth]

Baritone, almost bass sound. ha ha ha.

[@meudrone4k369]

Chique dji mini 3 😁 😃🤩🥰😍👏🏻👏🏻👏🏻✌🏼👍🏻

[@MrDrTanasit]

Thanks for the test, however can you use any decible meter App to check the different in sound level at the same distance? So I don;t have to do it. LOL But like to know which is quieter?

[@jackzhang8883]

Dji Mini 3/4 pro ist the Best drone ever ❤ilove this drone

[@gasquetmike8320]

Colors are very noticeable! Fun video!

[@CAPTAINDRONE798]

Thank you 🤗

[@oscarfarley4104]

wonder if top speed, under same wind conditions, is different?

[@jimanderson4865]

Hi Steve....Good video....Nice colorful props. I see your out doing some soul searching in the Kia....lol....We have two of them....👍

[@CAPTAINDRONE798]

Since I park my wife’s car behind my Jeep, it was just easier to take hers :-)

[@mechanickiwi4116]

I tried the carbon ones from aliexpress, they vibrate enough to interfere with the video. ordered a set of these, cant wait till they arive here in New Zealand.

[@newtoodrones5568]

They do look cool Cap, a nice review.

[@CAPTAINDRONE798]

Thanks 👍

[@artrubio6464]

Hey Steve, your Captain Drone sticker looks cool on you mini 3 pro. Other drone flyers said that birds does not like bright red, so your sticker is perfect. Do you sell them? I would not mind putting them on my drone being your subscriber and a fan.

[@CAPTAINDRONE798]

I give thousands of stickers away for FREE every December. Watch for the next giveaway stickers video.

[@driewiel]

Any chance you can review the Walkera T210?

[@belette85749]

On the mini2, the screws didn't have enough loctite on them and one blade nearly went off during a flight (fell of the drone just a sec after landing). Screws are also starting to rust after 6months, if you use MAS props, keep the DJI screws with their loctite, they are way better and safer

[@edwardmoody4180]

I like them better but your right like every 2 or 3 flights master airscrew starts to come loose

[@theurbanartist775]

@@edwardmoody4180 we need to be careful with these props. I bought a mini 3 yesterday because my mini 2 fell from the sky after a master airscrew prop came loose 🤷🏽 It fell from 300+ feet and I had to walk 2 miles in deep woods to recover it. The camera was destroyed.

[@Indpendent01]

@@theurbanartist775 this is something i consider when thinking about changing stock props - how does warranty work when you modify a critical component? Personally I think I would leave the stock blades, maybe paint them, but I do like how visible the MAS blades are

[@josephmarczi3993]

Hey Steve, are you going to review the DJI mini 4 ? Was thinking of upgrading for my mini se?

[@CAPTAINDRONE798]

Yes. I have it and it is part of a pile of products to review.

[@julianmclean3869]

Many thanks Captain for posting; there did seem to be a slight drop in the sound pitch of the MAS props; I managed to get my new 3Pro in the air today (after a "false" start with the first one I purchased!!) and its very quiet when there is no wind; just picks up a few Dbs when fighting the gusts!!!

[@adcraziness1501]

I just got a couple of sets. I've been waiting for MAS to release their M3P stealth props. I'd be interested to see how they perform. Right now I am flying with some off-brand carbon fiber props from ebay. Those have actually been great. Heavier than OEM but they perform better too.

[@CAPTAINDRONE798]

Mavic 3 Stealth props like these ones? kzbin.info/www/bejne/bWHIY2CXqKmqY7c

[@adcraziness1501]

@@CAPTAINDRONE798 No the Mini 3 Pro I don't have a Mavic just yet

[@hawkreaper1]

can the mini 3 stealth props be used on the pro? i mean are they any different in body or is it just lack of options between the 2? master screw has both on their site but i want to get them from amazon and i can only find mini 3 not mini 3 pro in red

[@SkyWalker-wj9bq]

Did you test sports mode with Plus battery or Go Pro? I heard motor overload alart will pop up when sports mode is used with plus (heavy) battery. I'm interested in whether this issue is solved by Master Airscrew.

[@CAPTAINDRONE798]

The plus battery is not used by many because it places the drone over 250 grams and thus makes it become subject to government regulations in many countries.

[@bonafide7027]

The mas sounds high pitched like a drill and makes the dji look toyish compared to its refined look! And this might invalidate your warranties

[@leadsled213]

I wish you showed the difference between the OEM screws and the ones supplied with the new propellers. The web page says they have blue thread locker applied. My factory screws were difficult to remove, even with a proper screwdriver. One was so tight, I had to use pliers after using a Dremel to remove some material so I could get a proper grip with the pliers.

[@CAPTAINDRONE798]

Screws look the same to me

[@andyhoughtaling6319]

Selling this drone and building FPV drones was the best decision I have ever made in regards to this hobby. You can basically build a better version of it for half the price.

[@tiloalo]

Under 250g? The main advantage being the weight allowing it to be flown without approval in many European countries.

[@andyhoughtaling6319]

@@tiloalo Yes under 250 grams. Faster, more agile, longer battery, more capable. Better in every way for half of the price.

[@RevMikeBlack]

I don't know why you'd want to make the M3P any quieter than it already is. I have excellent hearing, but I can't hear mine when it's more than thirty-five yards away. As for the one minute improvement in efficiency, that's something that's very hard to reproduce in real world situations. Further, DJI knows a tremendous amount about drone propeller design. If they thought that cantilevered rotors were a great idea in the long run, then every DJI drone would have cantilevered rotors.

[@baigani0]

who is that oligofren at 6:57 ?

[@BlackOmegaVirus]

Cool Props. Cool Video. 😊

[@CAPTAINDRONE798]

Thanks for watching

[@princekidstv1516]

Hey captain drone props color you chose that my Indian flag color i just love that keep it up

[@CAPTAINDRONE798]

Cool 👍

[@henrytaaffe7058]

awsome video captain

[@benleung2264]

Will this props fit Potensic Atom?

[@MeMyselfI_69]

On my Mini 2 SE they definitely sound better with a lower pitch but on my Mini 3 Pro I think the DJI props sound better

[@Glenrsi]

Nice, i want to buy some for my Mini 2.

[@timothyfrederickchurch81]

I want to get one of those drones, nice video.

[@bobbylefebvre6298]

Nice props always great review

[@CAPTAINDRONE798]

Thanks 👍

[@mobilehomer7582]

One thing, every Mini 3 owner needs a REAL screwdriver. These screws are ridiculously tight. Nice review, Captain.

[@CAPTAINDRONE798]

I've taken the props on and off so many times that the screws come off and go on easy now

[@lynsmith1096]

Good video Steve. The props do look good.

[@CAPTAINDRONE798]

Thanks 👍

[@bobbylefebvre6298]

Sounds good

[@tomasbezdicek9763]

Hello guys! I would really like to try out these bright props, unfortunately i am not able to unscrew the original ones. They tightened as f..k, any tips from experienced community? I bought better screwdriver but it doesnt really help me.

[@CAPTAINDRONE798]

If you have the wrong bit on your screwdriver, then you'll just strip them. I used a typical hobby set of screwdrivers with no issue. While holding the drone arm in your hand you just provide downward force as you turn the screwdriver counter clockwise.

[@pucheco69]

Please do a test with these props in the front and the regular props on the back if there’s anything different! I just wondering if you damaged the original props and don’t have four replacement props so you can still fly with the suggested configuration

[@CAPTAINDRONE798]

You can only fly with all MASTER AIRSCREW props or all DJI PROPS, you can't mix and match or else you'll get vibrations.

[@pickleeggs3340]

one whole fn minute lol. as for sound how does it work,if you have bigger blades will that cut it down?

[@MammothPaige]

Cool, I bought some for my friend as I have a Fimi

[@klrskir]

Love them! I use them on all my aircraft including the P4A.

[@thriftysurvivor6117]

What micro SD card do you recommend to fully capture the potential of this drone?

[@CAPTAINDRONE798]

A U3 micro Sd by Sandisk or Lexar

[@eugeneaustin]

great review captain i only have the mini but they look good

[@allegriach]

Thanks a lot for this really nice review! My personal MAS props are on the way to Europe….

[@Georgewrigley]

Awesome Steve! :)

[@dyna-drone1952]

Can I get them for my mini 2 ? They are kind of cool looking.

[@CAPTAINDRONE798]

Yes, not these, but they do make a different set for the mini 2

[@dyna-drone1952]

@@CAPTAINDRONE798 OK thank you Steve appreciate it. I’m gonna have to get some just to be different than the rest of the people. Oh wait a minute it’s just me.

[@Pennylegion]

Hey! Do these props provide any more lift power since the pitch is changed? I like strapping a GoPro to the top and wondering if it's improved. It's not terrible right now but I'm interesting in these. Would it make a difference, worse or better?

[@CAPTAINDRONE798]

The props are more efficient, i.e., they spin slower. Not sure about increase lifting power. If there was then MAS would have mention that acending is increased with the props.

[@bannerman100]

Logically, I would expect a lower frequency sound to indicate a lower speed of rotation. Also, quieter should mean more efficient, as less energy is wasted producing sound.

[@jeklo]

I like this view, where you can see the propellerarms. Did this often with my Mavic 2, looking at the sides, watching those arms. This isn't possible anymore with the Mavic 3 sadly. And yeah, I use the MA-Props too... mostly because of the colours and better sound.

[@akammer1000]

I have one of the screws on my drone stripped. Any recommendations as to how to get it off for an installation of a new prop?

[@CAPTAINDRONE798]

That means the screwdriver you were using was not the correct one (the end of the screwdriver did not have enough grip). Not really sure how to get a super tiny stripped screw out other than drilling it out, but if you are off on drilling then you'll damage the threads. Hopefully someone has a suggestion.

[@7MPhonemicEnglish]

Replacing an irritating sound with a less irritating sound is still an improvement even if it doesn't show up on the decibel meter.

[@kerryjohnson4328]

Hi. Love all of your videos. I have a question. The DJI props have stripes to indicate what motor the props belong on. What are the indicators on these props to tell you which motor they belong on? Thanks again for posting great videos. 🙂

[@CAPTAINDRONE798]

Super simple installation because you take the 8 included props and match them to the 8 existing props (you see 4 props face one direction, and the other 4 face another direction). Or, you can have a look below the video to the installation guide for beginners.

[@flywithbobo8237]

I'll have to pick up a set of these!

[@bigh7777]

Any other advantages other than being more quiet and having cool colors?

[@dji1tommy29]

I’m Leary of using anything besides stock. But……they do look nice.

[@WildBillRidesAgain]

We're it not for master air screw props my original mavic air would have went in the garbage. They lowered the pitch on the mavic Air 2 to make that one more enjoyable to fly stealthy when the Drone police are around. But I'm not quite clear. The mini pro is pretty quiet as it is so are you saying it's not necessarily quieter it's just has the lower pitch. Which works for me as long as it is not louder overall. Update, I just went to buy some and they're only like $9 a set. That seems like a deal to me. So I ordered two sets. $18 then I see the shipping was $5.40. Shipping get you every time . LOL

[@CAPTAINDRONE798]

They are much quieter. My friends who were at the field commented on how quiet the drone is. Now when I say quieter it is the pitch, so less annoying to the ear & sound fits in with background noise, thus people don't notice the drone.

[@mikespeedyfpv321]

Great review 👏

[@CAPTAINDRONE798]

Thank you!

[@MrRuhi2]

Mine doesn't fit as snug as the original DJI props. Is that common? Anyway they on & I'm going to try them out

[@CAPTAINDRONE798]

Should be identical fit

[@MrRuhi2]

@CAPTAIN DRONE successful flight! Have you ever had ambient light too low for sensors displayed?

[@CAPTAINDRONE798]

@@MrRuhi2 Yes. DJI drones require light for many sensors to work correctly

[@MrRuhi2]

@@CAPTAINDRONE798 thanks

[@seasparrow7427]

I bought them for my mini 2. They're horrible. Had the first set replaced and they're still loud... I hope they work for you guys. There's a lot of flash on these, at least on mine. I'm going to do more sanding on mine.... Waste of money imo...

[@thetreehugger]

I notice that you are using the wife's car (I have the same). Did the guys that broke into your Jeep do damage?

[@CAPTAINDRONE798]

Her car now parks behind me so it was easier to just take hers

[@hippywildchildracing]

I can to another great video ty 4 sharing

[@dextardextar]

they look cool but are actually louder and higher pitched.

[@swiftheathgardens]

Hey what is that tinted cover over the camera gibel?

[@CAPTAINDRONE798]

A cover would be a gimbal protector

[@bobbylefebvre6298]

Good morning captain cool channel

[@CAPTAINDRONE798]

Thank you

[@PapaDrone]

Nice... i want one !!

[@dronature]

great video buddy :)

[@CAPTAINDRONE798]

Thank you 👍

[@CrzyAce]

Only benefit these have is the color. Really wish DJI would do colored, the official DJI props are much nicer quality.

[@kingdevine7374]

Do you know if the dji nfz and altitude hacks work?

[@CAPTAINDRONE798]

I have never tried any hacks on the DJI drones so couldn't tell you.

[@kingdevine7374]

@@CAPTAINDRONE798 thx I been looking into it but I really want to purchase the splash 4 I've seen a few people talking about connecting/syncing issues

[@mirzach.]

Turns out that my dji mini 3 pro, has detected problems with taking off. It keeps showing warning ⚠️. I installed everything on right way. I'll guess I'm gonna keep with the original ones.. But still looks sick tho. Greetings from Germany

[@CAPTAINDRONE798]

Something is certainly wrong for that to occur.... Double check your prop placement.

[@davenorth2708]

Can I get these props for my DJI Mini2

[@CAPTAINDRONE798]

Yes, a different type but Yes... check the MASTER AIRSCREW website (link is below the video)

[@xtremefight]

Cool props! Where's your poppy?

[@CAPTAINDRONE798]

Poppy is on jacket, not sweatshirt hoodie

[@colinfielder6695]

Are they any stronger?

[@CAPTAINDRONE798]

Slightly