Find Out Where The Breakpoint & Shortpoint Of A Underground Wire | Noyafa NF-826 Tutorial

Main function:
1.Detecting cables, electrical lines-water/gas supply pipelines buried in wall or earth
2.Detecting interruptions and short circuit in cables and electrical lines buried in wall or earth
3.Detecting fuses and assigning current circuits.
4.Both transmitter and receiver display power level, code, battery, detected voltage type and value, and high-voltage alert.
5.Transmitter built in DC/AC voltage meter for linear measurement of 12-400V DC/AC voltage
Easily handle cables and wires issues. Get accurate test results in extreme time. Which device get multiple test conditions meet your need.
___________________________________________________________________________
Know More：www.noyafa.com...
___________________________________________________________________________
Discount Link : store.noyafa.c...
___________________________________________________________________________
Follow Noyafa to Get News on products, Promotion, Events, and more
Facebook: / noyafa.fans
Linkedin: / noyafa
Instagram: / noyafa.official
___________________________________________________________________________
If you like our video, please subscribe to our channel, give alike
Thank you for supporting our channel !!

[@Arshik118]

Noyafa NF-826 this is the BEST cable locator!!! I recommend!

[@noyafa]

thanks for your support and trust

[@t.m.i.toomuchinformation8600]

I was unable to duplicate the first test scenario with 2 wire 23awg. No matter what I did the signal strength and sound crosstalks with the ground wire and went past the break. Reading the same signal strength each time.

[@noyafa]

Maybe you can try, reduce the test signal

[@georgesdibeh7826]

If i have a utp cable cat 6 or multipair cable with one pair broken down the road Can i find it with this device Knowing that there are many pairs in the cable And that they are inside tubes in the wall?

[@noyafa]

clip the 2 pin of netcable its work

[@davec.3198]

I have a 3 wire 220v submersible well pump that I want to find. It does not have a short. Where do I attach the ground wire?

[@noyafa]

maybe it‘s grounded in water

[@davec.3198]

I bought this. Looked for days. It could only narrow down my buried well to a 12 x 20' area. It would 'hit' everywhere with equal intensity. Returned it.

[@drewbush6535]

helpful video

[@edra1837]

can this device trace circuit breaker under energized circuit (110v and 220) ??

[@baileyhomesllc3972]

What would cuase locator signal to fade in and out?? I'm tracing a live underground 120v. I'm tracing fine with a solid sounding signal and then it stops, but continues to do an in and out type of signal. Any reason what would cause this. I have leads on live line and ground connecting to emitter. Thanks

[@noyafa]

Please stay, the position where the signal disappears is near the breakpoint. Hope it helps you

[@Roll2Videos]

I could use this on my YT channel

[@AfflictionSuzukiGsxrLosAngeles]

Do you have to shut off power in order to connect it to the wire you’re tracing?

[@noyafa]

NF-826 may cause damage when it working in cables with strong current . but nf-820 can testing in live cable .For safety , do not recommend testing while the power is on

[@Crypto.Vantage]

how about when there is a short or damaged area on the wire? I get 30v off of what should be 120v on a nearly 500' line buried in a pvc pipe.

[@noyafa]

This device can be If you need it, Depth Range: 2m Max Cable Length: 1,000m Working Voltage Range: 0 - 400V please buy it in the official youtube storetested.， 😘

[@espectador456]

Can this device be used on live 220V or 380V cable while tracking?

[@noyafa]

yes,it can used on live 400v

[@darrenchan687]

When the cable is live 220v how deep can it detect the cable within the wall or underground ?

[@noyafa]

@@darrenchan687 also can detect the deepth of 1.5m

[@hanssteffen842]

@@darrenchan687 lol

[@kamilk6241]

Just copy of Kewtech KT700.

[@xavierrageul4941]

This device can detect cables underground ?

[@noyafa]

yes,its main function is detecting underground cables

[@Mike-in3cq]

@@noyafa you should make a vid to show how to do it. Your instructions are terrible.

[@marielletua8262]

@@noyafa this device can detect 1 meter deep buried cable?

[@lakeman59]

Showing it being used with cables above ground what good is that.

[@noyafa]

Because there was no 3D animation before, the cables were exposed to look more concrete.

[@MrFreeze79]

How deep can it scan?

[@noyafa]

Just turn on the function to use, scan mode. The hold time can be set in the setting to wake up

[@user-cc6si5vs7p]

😖 .. В открытой проводке я и простой звуковой отвёрткой-индикаторм найду без проблем. Присыпь кабель землёй/песком и покажи , как прибор "видит" трассу

[@noyafa]

sorry,I dont understand your question.Could you detail to tell me?

[@user-cc6si5vs7p]

@@noyafa , "... In open wiring, I can find a simple sonic screwdriver-indicators without any problems. Sprinkle the cable with earth / sand and show how the device "sees" the route" Transliteration in Google from Russia

[@noyafa]

@@user-cc6si5vs7p it is the same oprate,according to the voice to trace the cable.

[@espectador456]

Приобрёл данный прибор. Ожидал от него большей мощности. В землю кабель закапывать не пробовал, разложил на бетоне и тестировал. Обрыв одной жилы в кабеле находит с расстояния меньше метра при условии максимальной мощности как на передатчике, так и приёмнике. Короткое замыкание находит с ещё меньшего расстояния. Заявленную величину в 2,5 метра можно получить только подсоединив щупы с разных концов кабеля, то есть сделав петлю.

[@user-mr3ko4vo7f]

@@espectador456 Так что ,Братан ,стоит его брать, или лучше Mактэч?

[@marygradert4019]

Not working at all signal dies more than 3 feet from the transmitter- even over wire know is good. Instructions and videos are useless

[@noyafa]

You can try to increase the signal strength of the transmitter, and then increase the sensitivity of the receiver

[@lindahess6199]

Mary, I am having the same issue. Did you figure out how to find the break?

[@irios515]

I wish you could do this video with real underground wires! This is not helpful!

[@noyafa]

Sorry, our video is not good enough. We are currently looking for special effects renderers to present the product more concretely.

[@DIYjelah]

​@@noyafamind to lend me the tools and i tested in real situation on my sites?