Finding the Cure...For Death Wobble!

[@colesteven1123]

Seriously, a good death wobble is better than coffee or an energy drink early in the morning

[@farmertylerranch4399]

Haha!

[@Ben_Dover_6996]

😂😂

[@peterconnolly3207]

I love fucking with people ler them think we are going down lol

[@acegood7058]

Had one 10 minutes ago. You’re not wrong brother. It’s like my truck decided to bust a move without telling me.

[@jhaaser123]

For real!!!!

[@shanejackson6856]

1. Slack in steering components ( including ball joints) 2. Not enough positive caster (usually after a lift or poor alignment) 3.Worn out steering stabilizer 4. Bad tire (out of balance or with broken belts inside). If you have an alignment done on an older 4x4 truck always request a little more positive caster than the manufacturer recommends if possible. The most common cause is of course wear on the front steering or suspension parts. Second most common is a lift without proper alignment, and Third most common is bad tires. Steering stabilizers can mask the problem for awhile, but rarely eliminate it forever.

[@kevinclark6289]

For the amount of money that pickup trucks cost nowadays this is totally unacceptable coming from the factory.

[@rustybeatty6567]

This is what happens when you remove the front leaf setup that used to be on most heavy duty truck applications and offroad type tires don't help this problem either and with lighter weighted engines now common on most trucks the problem is exacerbated a coil over shocks would definitely help.

[@halsnyder296]

60,000 miles is a lot of wear on some wear items. I would expect to be changing some out on heavy use vehicle.

[@guamazolopez6456]

@@rustybeatty6567chevy went through this the best, independent suspension

[@ritome-cc2qi]

I have the same issue with my 2022 f350 20k miles. It was scary, After i run over a pothole it pulled me to the lane next to me. I took to service and funny thing the service rep said it was the first time he heard about it. The following day he called and said there's nothing wrong with the vehicle. I know what happened isn't normal so I took it to another ford service and they knew right away what was the issue. They replaced the stabilizer at no cost and also warned me that the replacement will only last for not very long and it could happen again. True enough it happened again at 30k miles, Now, im thinking of just doing the same as what's done on this video vs asking warranty again just for them to install the same fix that only last for a short amount of time. Thank you for sharing this video!

[@mocheeks709]

Lawsuits are cheaper than a redesign

[@comanchefun1612]

It will start back up, I did the same. Worked for a little while then did the track bar ball joint and bushing. That helped, I’ll be doing caster shims next. From what I’ve read these trucks came from factory with bad caster. I won’t be buying another ford I can tell you that much.

[@tomking5822]

Hate to tell to they are all that way now

[@ldygzlle1291]

Thank you for making this video! The undermounted cameras really helped me see what is going on, even an old widow like me. Very well put together info.

[@juliealbert9222]

I had a 96 jeep grand cherokee that did that. I literally almost 💩 myself! Scared me to death! Steering stabilizer, shocks, and a front-end alignment worked great. Sure Wish we could've seen more of Sadie!❤❤

[@jjp1117]

Julie Albert I had a 94 lifted 2door Cherokee jeeps always get death wobble

[@johnnydean1052]

I have had the same issue with 07 F250. Only happened after changing to another tire manufacturer after the OE worn down. When the tires were changed to another manufacturer after issue occurred wobble never happened again. Not saying tires are the single issue for the wobble but, tire manufacturers have different processes building and in material of the tire. That is a heavy front end on the 250. It needs the best built ture under it. Don't overlook the tires in diagnosing the issue. Good Luck!

[@dantco]

GoPro for diagnosing suspension problems? The FREAKING best! FTR, you are amazingly skilled!!!

[@officialbakedpotato1470]

I have been trying to rig cell phone to do this for 2 mo. quess I need a Go Pro exactly what Im tryin to do Thanks

[@homesteadinginthegreatoutd7002]

I only have to go twenty feet from my driveway to find many large bumps, actually two miles of bumps. I owned a fleet of fords for twenty years always had front end alignment issues finally switched to over to Dodge 10 years ago and am MUCH happier with everything.

[@2drewbaker]

Changed all the parts infront of the license plate.

[@gabethomas3190]

The slow mo was a nice touch. You could see the whole front axle oscillating side to side, that tells me you need a track bar or at least give it a good check by having somebody get in the pickup and turn the wheel back and forth just a little while placing your hand on the ball joint end to feel and or see any movement. Could possibly have a loose ball joint end on the drag Link also. You're spot on about the shocks and stabilizer being a bandaid 👍

[@farmertylerranch4399]

In the end it was in fact the track bar ball joint.

[@jjcactusandsucculents-open2156]

My too! I was on the interstate headed home from St. Louis in my Ford 250 Van and the bearings went out on the front right wheel. Thought the wheel was going to come off! Can be scary! Great Video Tyler! Thank you so much for sharing! Stay safe and Healthy! :-)

[@makelifefun5101]

Mine ended up being the traction bar. That is the bar that is slanted behind the drag link, From Frame to Axle. Went with the Tracanator from Baja Customs. Gets rid of factory ball joint.

[@spyder000069]

Happened to my '19 f250 fx4 6.2 last week. Pretty violent shake when it happens. One of those check your shorts moments. Hit a bump at 65 and it didn't stop until the truck was down to 30. Truck always had considerable bump steer previous. Only 17K on odometer currently and truck is babied. No offroad. Had wife crank wheel back and forth while I was under it and saw a bad ball joint at the pitman arm and a couple of other points. Took it to the dealership and they replaced the dampener under the "customer satasfaction" program (lawyer speak for not an official recall), replaced the entire drag link assembly and joints, alignment, and tire rotation. The truck was one week beyond the 3 year factory warranty and I would have been stuck with the bill but I had bought the Ford extended warranty on the truck so I only had to pay the $100 deductible and $20 for rotating the tires. Truck seems better but only time will tell. I can tell the replacement dampener is stronger with less bump steer. If it happens again I'll try the caster shims that others recommend.

[@captainjoesanglingadventur4894]

Have a 2016 that started the same thing last month I went through the Damper, Shocks tire rotation and balance. It lasted about 3 days until it reared its ugly head again. Just ordered new Drag Ling and all Ball Joints as well as Tire Rod Ends in hopes this is the game changer.

[@randyballard3348]

My 2015 F350 is doing the same thing. A shop quoted me over $1000.00 to replace the drag link today. The truck has 140k highway miles on it but it's very clean and I have serviced it to Ford specs. I hit a pothole at 70mph and the death wobble was a eye opener and a pucker upper . I'm going to replace all worn front end parts but first I'm going to replace the shocks and steering stabilizer. Thanks for your help. Good video , looks like your living the good country life young man !

[@farmertylerranch4399]

Have them check your track bar ball joint too. Turns out mine was shot and contributed to the problem as well. Good luck! It’s a scary problem

[@mauser8515]

The second time my 2012 did it I stuck my head out the window. I was blown away by the amount of left and right travel of the wheels. Crazy as hell.

[@jbmbanter]

When I owned VW Super Beetles back in the 70s when they started wobbling/shimmying the steering damper always fixed them. Would have been interesting if you'd installed just the damper and did the test.

[@AlbertaRanch]

Thanks for making these "extra" videos lately. Really appreciate having something to watch these days.

[@karltomecek2539]

I did exactly the same things you did. The wobble is now more consistent. The tires have been balanced. Steering damper changed and Bilsteins installed. I truly think its the tires. Truck came with Toyo tires. When they wore out I put bf Goodrich tires. Once these wear out I will go back to Toyo. Driving my truck is like sitting on top of a washing machine during the spin cycle. Love my dealership but they have no clue. Supposedly they contacted Ford and Ford doesn't know. It is a machine. Really feel let down. Been a Ford guy my whole life. And I am 59.

[@dannywilsher4165]

My DW story... I have a 93 Grand Cherokee. At around 30,000, it started the death wobble. I have a car lift and have done my own mechanic work all my life. So I figured I have this. Up it went and I did everything I have done to hundreds of vehicles for years to check all suspension and front drivetrain. Everything seemed tight and unworn. My wife's dad bought the Jeep new and passed shortly after. Her mother drove the jeep to the store and back till she passed and we inherited it. I know the thing was not put in four wheel drive very many times in it's life. So basically what I am saying is the Jeep was just like new when we got it with less than 20,000 miles. Back to the story of dw. I couldn't find anything wrong so I took it to an alignment shop that I have used for years and have always had good service from them. They couldn't find anything wrong so we drove it up the road. At 45 mph it went into the dw. The guy said he had never seen anything like this. He checked everything and did an alignment on it and it still, dw... After several attempts, he said he determined the track bar was the problem. $180. later he said it was fixed. I picked it up and on the way home it was still wobbling. Went right back and got my money back and found another shop. Same thing, not a clue what caused it but said I needed to replace all my bushings and tie rods. I asked why and they said they were all worn enough that they were all causing the problem. I didn't buy it. Now if I would go from 40 to 60 under heavy throttle, I could get past the wobble and it would run all day. But between 45 and 60 it would almost always wobble and violently!!! Eventually I replaced every part that can be replaced including tires twice because they would wear out fast. 4 or 5 shops tried to fix it and no one knew what to do. After putting up with the problem for several years and spending probably $2,000, I was thinking about what was going on when it was wobbling. I had even stuck my head out the window to watch the tire. What I decided was the toe in was causing the problem. I know it was aligned to specs at least 5 times but something was still not right! I got my tape measure out and a couple of pieces of angle iron and set the toe in to less than 1/8th of an inch. It was over 3/8ths when I first checked it. It has now been over 100,000 miles later and never once have I experienced the DW! I figured out the geometry of these suspensions cause this problem when they get to a certain harmonics. With the toe in adjusted in too far, the left tire will try to go right at a certain harmonic and when it gives in to traction making it slip, then the right tire will be trying to go left and at just the right harmonics the fight for traction gets to be more than the tires can support and they begin fighting and they start the wobble. Don't know if this is a good explanation, but when I took almost all the toe in out of my alignment, it fixed the problem. Even with 31 inch tires the wobble never came back. I now have over 160,000 and it runs and drives like a new one.... Almost.... lol...

[@dannywilsher4165]

@@rockscrambler6700 Definitely too much toe!!!

[@heatherrrenea]

@4:53 😂 why I think 🤔 man you really grunting to get under there with that mallet 😂😂

[@jimc5624]

Just found this and check for the recall on the dampner you might get some money back also in the slow motion part you can see the axle and frame moving separately check the track bar end for wear. With the truck on the ground have someone move steering wheel and look at both ends of bar for movement

[@zaineridling]

Had this problem whenever I went 65-72mph in my truck, and it turned out to be a loose tire pressure sensor that weighed 4 oz. Removed all of them and that instantly fixed it. Or just tighten the clamp if you have that older style sensor. 👍👍👍

[@him6025]

I had the same thing and my dealer continued to work on it until they found that the caster could be set all the way back. That fixed it but later I had the front end aligned and it was back. Took it in again and believe it or not Ford had come out with a part fix. They were being used up so I had to wait several days to get one from out of state. Now the truck feels like a new one. This should have never happen to start with but I guess enough law suites were filed.

[@matt187amn]

Hi Jerry. Did they happen to mark down a kit# or part# on your paperwork of the part they used to ultimately fix it? I'd like to look into that. Thanks!

[@sashcraft51]

I always learn something watching you fix stuff. Good vlog.

[@Randy_Savage_ohyeah]

Have a 2013 F250 Diesel 4x4 with about 84k on it now...have never had this issue. Replaced all stock shocks with Bilstein shocks at about 50k miles. Thinking I should now replace the steering stabilizer, but again have not yet had this issue. Thanks for the video.

[@ardurbin2]

Excellent video Tyler! Only thing more frighten than steering death wobble is when some 'ID-10-T forgets 2 secure their load & some of the load departs the vehicle in front of U on the highway,. That will cause U 2 change U R underwear quickly! Keep those videos comin' our way. 👍👏😊

[@toshayonguard4253]

Yes the steering stabilizer is the issue Dodge had this issue years ago I replaced hundreds of them. Better get your Alignment checked by your local trusted shop.

[@whirlwind8825]

I have a superduty with high mileage . I rebuild the front end every 70,000 miles . The ride height is critical and worn or weak springs change the geometry . Lower ball joints are tight when rolling but once weight is off on a bump if the lower socket is loose then it will wobble on bumps . So I change everything fresh each time so I dont have to do it as each parts wears out . New shocks, springs, balljoints, tierods, wheel bearings ect

[@tomking5822]

Mine came from the factory with 0.4 caster brand new Hankook tires not cheap ones 400 00 per tire,put 3.5 positive caster shims in no more wobble,there was no problem with the wooble until manufacturers put in non adjustable caster bushings

[@mikedaugharty5544]

good job . lotsa info on u tube about the ford wobble. i had farm trucks do that while working as a mechanic . not a good feeling when it starts the shaking .. love the pup snoozing!!

[@laser204]

After my 2nd year of owning my used F350 I got the DEATH WOBBLE. New tie rods,new drag link bar, new track bar ball joint, new track bra bushing, front end alignment, new shocks, new steering stabilizer shock and still have the DW! Ball joints seem to be good and wheel bearing seems fine the only thing I have left, STEERING BOX! Think I’m gonna yank this sucker out and drop a new redhead in it unless someone stops me with another fix. Oh and my caster are fine, had a shop look at my alignment reading

[@adamschwartz6918]

we have this issue on all our ford fleet trucks. 2014-2016 250s and 350s short and long beds. replacing both front tires fixes the issue. after about 4-6 months when the tires are worn down to about half it starts happening again more and more frequently. our solution is putting the front tires on the back and putting new tires on the front.

[@PaullaWells]

Wow, way back in the day I had a car that would do that every so often. It wasn't every time, but enough I remember it. That would have been good to know. Now, if I encounter that same problem in the future, mine or anyone else's, I will have a mental reference point to remember. Thanks!!!

[@BradMyers]

The puppy is so cute playing while you making a video.

[@wandawhitney9671]

Glad you got the DW fixed and your safe. Lil fur Freind is growing and looking great.

[@b-17wingman37]

That`s why there are brake and front end specialists. The key to understanding the problem is in what all the steering linkage connects to. It`s called an integral power steering gear.

[@boomdawg56]

Check the track bar for play ball joints, tie rod ends and shocks, check wheel to make sure you haven't thrown a weight. I changed the a bunch of parts on my truck and couldn't completely get rid of the lateral shimmy till I replaced the tires.

[@libbylauderdale4255]

The death shake is dangerous. Glad you are working toward a complete fix on the front end.

[@jerryhill681]

Good video.The shots of the suspension in action was scary. I see a new KZbin superstar. Your pup!

[@Jackmerius_Tacktheretrix]

You think that's scary wait till you're behind the wheel gping 65-70 and it happens. Cant imagine how bad it is here in Tx with 80 and 85 mph speed limits

[@johnwhitmore5290]

Thank you my brother been looking for a true reason why my SUV was doing this .

[@OkieProductions]

track bar and steering stabilizer fix 90% of the death wobble problems on stock trucks. When their lifted is when you cant hardly fix them. And the stabilizer and track bar bushing are just a maintenance item. Plan to replace them every 50k-80k miles. good luck.

[@dalehlad8577]

I did the same exact Bilstein upgrades along with new front tires and it fixed my issues on my 2019 F 250

[@danrose8838]

Like the channel. As has already been mentioned this problem is not the shocks or stabilizer but bad bushings in other front end components most likely. Check tie rods and sway bar. The new sway bar will attempt to dampen that amount of vibration but is not meant to cure that much of a problem. This might be why the old dampener was leaking oil. Also the old shock actually looked good. It should just resist compression and extension. The new shock just has a return spring for extension but is not necessary to function properly. The old one looked hard to compress. The upgrade is a good one. I also like Moog aftermarket steering and suspension parts.

[@lookeywho1287]

Dan Rose The sway bar controls body roll, not the vibrations illustrated here.

[@4459mbc]

I have the same problem with my 2019 King Ranch. 1st time I brought it in the dealer said it is simple my lane indicator. I told them, i know how the lane indicator feels and keeping it in my lane when it wobbles is for from that. I then video the steering wobbling and now they are changing the stabilizer. I hope this works!!!!!

[@wheeliehunter6937]

Brother if your problem persists check out the powerstrokehelp channel, the guy shows and talks a lot about correcting the issue and seems pretty knowledgeable about it, also shows videos of driving after the fixes. I hope my 19 never develops it and yours got fixed but it's always good to be informed about likely fixes.

[@nineofhearts6020]

I’ve got a 15 super duty. Same problem , I replaced shocks and stabilizer shocks also. You have to replace the light duty stock track bar with a heavy duty adjustable track bar . 100 percent fix .

[@JD2CYLINDERNUT]

Good video. I’ve got 4 newer power strokes (2011 to 2020) that pull goosenecks delivering product under contract. This has been a problem on three, but not the 2020. I’ve also had some delivery trucks (power strokes) that did it that I’ve sold. The number 1 problem I’ve found was front tire wear. Looks like you made it way better but I found new tires really made a difference too. Either way we all agree $50k to $80k trucks should NOT do it period......

[@natec913]

I had this issue. 2012 F-250 which got progressively worse. it was scary when it got bad enough that i took it in. the funny thing is the ford maintenance greeter tried to convince me that it was a bad pothole in the road and there was nothing that could be done for those. silly weasel. this is a serious design flaw and safety concern that should be a ford recall. if this would've happened with my family in the truck towing a fifth wheel, could've been a bad situation. great video. thanks!!

[@Jackmerius_Tacktheretrix]

You'd think by now they'd have at least redesigned the suspension when the new 2017 model came out but they didn't. Says alot about how much they care about the consumer, but hey, I guess if the fleet sales are still strong they don't really have much incentive to fix it do they. 2020s still have this problem.

[@hootche1]

F T R, check the track rod ends, on each side of the front wheel. How Too. jack the n/side wheel off the ground, put your left hand at 9oc and your right hand at 3oc, shake the wheel in and out to see if there is and movement, it should feel firm, repeat on the o/side, any excess movement look at the track rod end for wear, replace if required. on removing the track rod, count how many turns to remove it, replace in the same manner, it would be advisable to have the wheels tracked after this type of work. to prolong tyre life. best of look , and keep safe.........

[@stenny1970]

Farmer Tyler Ranch - I have bought several new F-150's FX4 with all having this same issue right from the start. When I go over some Rail Road Tracks or bumps it feels like my truck goes sideways. At times it can be real scary. My wife hates it. I don't know why or where it is coming from on mine. I thought it was the rear end. When I said anything to the Dealer they just said it is a heavy duty suspension...

[@racer7954]

Hi my family had Australian shepherds cattle dogs to help with the cattle. They were the first in our area. I believe that the mother the first one we got came from Australia. This was back in the 70’s. We live near Salem Oregon.

[@camelsbuttefarm9965]

I've been wanting to ask if you had the wobble yet. I have a 2015 F250 and I've been chasing front end issues like that. 3 steering dampers, track bar, track bar bushings, 1 tie rod end, shocks, new tires, 2 alignments with 1 set of caster bushings, and it doesn't death wobble, but now the drag link is shot, and I'm planning on installing ("the band aid") dual steering stabilizers because of "bump steering" that makes it feel like it's going to go into orbit! I wish Ford would pull there head outta their a$$ and acknowledge that they have a severe problem. And to add insult to injury, the wiring that controls the alternator is corroded. So there's a pile more unnecessary work to be done. Take care.

[@michaelpeace716]

The real issue is that Ford has not built in enough caster into the 4x4 trucks. When the steering components wear, it allows more movement in the system, and then the tires basically fight for control of the vehicle. The true fix is to add negative caster to the front end. Unfortunately due to the design, you can’t get enough with just the eccentrics. The front differential assembly needs to be “rotated” so the top of it moves toward the rear of the truck. That requires modifying the trailing arms. It’s not a simple fix, but it’s the right fix. Replacing shocks and other steering components will only buy some time before it happens again.

[@FordBossMe]

So I'm a mastertech for Ford and Ford recomends their new steering stabilizer update but it doesn't fix it the fix was the beefy FOX SHOCK it does go away with the Fox shocks and that's what I recomend to the customers and it fixs it

[@FordBossMe]

The bilstein is great as well

[@kellieharrison461]

Thank you for the video. This just happened to us - F250 pulling cattle trailer. Kudos for recreating... shew, that’s some scary stuff. 😳

[@skywongsuwan365]

It's not manufacturer specific it's because of solid front axels. All manufacturers have the same problem. My Toyota had death wobble.

[@shawnmoore5621]

The shocks are helping but you should really check the ball joint that the track bar bolts onto.

[@BrianAz]

This problem is now an Official Recal from Ford so you can get this fixed. The recall is for the "steering linkage damper" field service action number 20N04. So you nailed it on the problem! I think your solution is the way to go even though I think Ford should chip in on the cost, but that will never happen!

[@guamazolopez6456]

as a second or third owner can i get it fixed on a 2008 powerstroke?

[@bryceb7982]

The source of the problem is there's not enough caster built in to the factory front axle alignment. You need about 3-5 degrees of caster over the factory 0 to make this problem go away for good. BDS suspension and I'm sure some other manufacturers offer these increased caster bushings.

[@SeeLevelBus]

If you only had a little wobble you're missing out. You probably don't have the death wobble, it almost breaks your wrist trying to hold the wheel.

[@phillipjones3342]

That was a good fix but I agree there’s something else probably Bushings or bearings

[@MultiLEGODOG]

track bar side to side play ,way to test it is turn the wheel just a little side to side and see if the frontend of the body is moving side to side and not the tires

[@melissaclark4912]

Like directly from the factory. Its more than that

[@legalizitt]

This is caused by harmonics and frame rail beaming. It can be rectified by adding a frame rail crossmember, which will strengthen the frame, and, change its harmonic frequency. A steering stabilizer is just a dampener, and is a band aid at best.

[@DennysCountryLife]

Great preventative measures there, and I'm glad your at least safe now! The death wobble can be hard to recover from in some instances. Bilstein make awesome products. I'd love to do the same upgrade on my F250. Be safe out there and if there's something else wrong, I know you'll take care of it!

[@farmertylerranch4399]

Thanks Chris I thought of you on this video because I know you have the same truck. Hopefully you won’t have to deal with it!

[@wykeishacraft6820]

Hello to Farmer Tyler Ranch ,this was a good video thanks for sharing.

[@robertbenavidez7164]

It's your front Track-bar, Replace the ball-joint on the Track-bar, and make sure that all of your tie-rods, are not worn out, as well as all the ball joints. Your right, a steering damper will mask a problem with a Track-bar -joint! (AKA death wobble) and if you want to feel something really weird? After you take off the track -bar? Get in the truck and start it ! But just sitting still move steering wheel side to side (left to right) and see what happens? But don't drive the truck!!! ....lol yours truly, 40 years of experience brake and front-end Alignment ASE certified! Have fun ....and be safe.

[@jwinders78]

There is no caster on most of these truck from the factory. I had my local alignment shop put as much caster as they could and that fixed the problem. You cannot have the upper and lower ball joints directly in line. 2 degrees is all you need to take all the wobble out! I ended up with 2 degrees on the right and 2.3 on the left.

[@ricardorodriguez-se7tp]

Where do I get the caster adjustment

[@jwinders78]

@@ricardorodriguez-se7tp Your local alignment shop can put shims in to off set the top and bottom ball joints.

[@nevadasmith100]

I had a 2006 F250 super duty with only 120k miles on it that was a diesel that had the death wobble. Ford's fix for it was to send me a letter saying to slow down and mash on the brakes. I finally sold that POS because it also had major engine problems as well for the entire life of the truck. I bought a 6.2L 2019 F250 new because I wanted a reliable vehicle to travel across states with my family and dog. Just happened to me 3 days ago with everyone in the truck and it was much more violent than what your video was. Luckily I had a place to pull over on a two lane road outside of Williams and was lucky I did not get in a head on. Pretty upset with Ford as they knowingly sell these trucks with existing issues that are dangerous. Called Ford Motor Company and the lady acted as if she did not know anything about the Death Wobble and said to take it to the dealer. I expect nothing to happen. I am in Nevada City and almost neighbors, thanks for the excellent Video and wondering about any updates if you had to replace more on the front end. Thanks again, Subscribed !

[@TheDanrdanr]

The problem causing the death wobble is a track rod lower ball joint. It parallels the steering linkage that goes from the steering box to the steering knuckle. You can have somebody wiggle the steering wheel back and forth with the engine turned off, and you'll see the lower ball joint on the track rod is loose. It connects to the axle. Of course since you have a GoPro, you can set it on the ground and record it to show everybody. Replacing the steering stabilizer camouflage the problem. It will come back.

[@davidkelley9509]

So do I just need a new lower track rod ball joint ? Or a whole new track rod from a different company cause fords is shit

[@geolehman]

My wobble was courtesy of the previous owner. He had the tires replaced, 275/75r18, and the guys balancing them used sandbags. At 65 mph, the wobble would start. These sandbags are not intended for standard tires and would shift. New tires, no sandbags, no wobble.

[@alaskarailroad3996]

And they say "BUILT FORD TOUGH" oh yeah, they realy are.

[@duanemord2774]

Lol tell us how you really feel

[@broganjohnston750]

They are built tough… not safe lol

[@skywongsuwan365]

It's not just Ford's it is any vehicle with a live axel. My Toyota is alot worse than what you have seen.

[@rickyzuela7569]

Ram, Chevy and Ford all have this problem. I've seen the worst in Rams.

[@jeangibson5680]

In North and South Carolina they call it the death wobble in all the new large Ford's and Chevy trucks! There's even class action suits because of it . You fixed yours quickly, I wonder why these others aren't bring fixed so quickly!

[@46rambo49]

Dodge put tie rods off a K car I think in their one tons, the factory issued and "upgrade" about twice the diameter and new bushings. Ford still hasn't fixed the problem that I know of. shock diameter of piston makes all the difference too.

[@newlife8610]

I couldn’t help watching the puppy play in the first part of the video!🙂 My car did the death wobble not long ago & I took it straight to the shop where a guy I know was able to fix it. That scared me to death when my car did that.😳🚗💵

[@marilyncapehart663]

Thanks for sharing Tyler I know you can do it yourself you can fix everything yourself., you are truly blessed not lucky but blessed 6-20-2022👍🏽👍🏽😊

[@jones4262]

This video is amazing. Thank you for the depth.

[@terrycarter8929]

Mine lasted 190k and I bought the same shocks. All of them! The previous owner drove it for 175k and only changed the oil, tires and brakes. I have been replacing all the normal service items like crazy.

[@joemcmillan2089]

The shocks have mask the issue that will recur as parts wear more. There are loose bushings in the front end - most likely will be slop in the lower ball joints but could be other parts also.

[@timnoone3118]

Bought a 2017 F250,had the same problem at 50K miles. Traded it in on another F250. The ride on this one is great.My brother rode in it last weekend and inside of 10 minutes he said "this one rides alot better than the other truck". I believe it is a hit or miss thing,some have the problem and some don't. But Ford claims there is no problem and there is an active nationwide lawsuit against them for this problem. SHAME ON YOU FORD!

[@Jackmerius_Tacktheretrix]

You'd think that whem they redesigned the super duty for 2017 they'd have changed the suspension considering all the death wobbles but they didn't. My friends 2019 did this, so off to the Ford house it went. Picked it up and as soon as we hit the service road and got up to speed and hit the first little bump it was there again. Didnt evem make it a couple miles from the dealer before we had to turn around and take it back. 3 weeks later it was good for about a week before he called me up again for a ride. After 4 times to the dealer he got rid of it. I get that you can fix it but why should the consumer have to fix something that ford is too lazy to address or fix from the factory? Because they have such a loyal fan base that they have nothing to really motivate them to fix it because of the fleet sales and the brand loyalist that will buy it no matter what. Great fix but still, why should it be left up to us to fix their design flaw that they refuse to fix?

[@rdb8509]

Good information. Thank you for taking the time.

[@hrdcoreme]

I started doing this very same thing while I was pulling my 40 foot camper I drove right into oncoming traffic thank God there was nobody coming

[@dwaynekelley7518]

Steering stabilizers will help . Castor bushing set to 1° positive helped

[@FrenchmansFlats51]

90 pct of the time its the track bar. also your tie rod ends and drag link ends are now damaged from the dw and also contributing to the problem. that new stabilizer will wear out fast, it is overworked by all the loose steering and track bar components. next to go are the ball joints as they are now compromised.

[@thomasbumgardner6970]

It’s not shocks. I had the death wobble on my 2017 F350 with less than 20,000 miles on it. It would go into wobble at bumps generally around 56 mph. My Ford dealer finally got authorization to change the steering stabilizer and so far that has worked.

[@ElapsusRealitate]

Any update on this after 8 months? I'm doing the same right now with 2016 F250. Thanks mate!

[@slofobra4966]

I have an 03 f250 , 2wheel and it wobbles like hell.

[@feliccasampson5376]

Morning Tyler Am glad you caught the problem before it got worse. Great job Tyler. Thanks for sharing. Enjoy your day

[@nursebunny7420]

I have watched everyone of these about two times. Love them. One of my favorites was when you cleaned the barn and piled the old has in the corral and then let the cows in. They jumped and played like school girls. Very cute. Love the series.

[@timmattingly2250]

Tyler, I figured with replacing the steering dampener an alignment would have almost been mandatory. If the death wobble has been going on a while I would definitely have the bushings checked and I would check the wheel bearings too. Great idea with the Go-Pro under the truck!

[@M-Hancock]

Had two F250s before that both had that issue. Switched tires and ran a 285/75/17 in a more aggressive all terrain style tire and it never happened again. After having an 04 6.0 that was a major disappointment, and a 2010 6.4 that was even worse than the 6.0s, I switched to a 2016 Ram 2500 and will never drive a ford diesel again.

[@JaRhule]

Glad I found out about this issue. I'm in the market for a 2015 or 2016 superduty. I guess I'll keep my current truck until a permanent solution is found.

[@farmertylerranch4399]

The new stabilizer seems to have solved the problem

[@Boeinguy]

“Felt a little shimmy”…. I about went off the road

[@ColtonBlumhagen]

You need a decent extension but you can get the top bolt of the front shocks from the engine bay. Way easier.

[@calebjefferson7639]

My uncle has The same truck but it's an F-250, He has over 120k miles and has never had any issues.

[@WildLilac01]

I fixed my 2015 F350 SD my self after watching a bunch of KZbin, thinking to myself, HELL No on spending that kind of money. I got a can of Red N Tacky. Sprayed my front end ball joints ect. No death wobble since. I would try it before spending you $$$

[@robertsimmons3556]

Once you've experienced the Death Wobble...well it the last thing you want to do again. Like you I went thru all the component change outs. Each time it seemed to help for a period but it always came back. Years later I came up with a More Likely then not hypothesis....To long for this post. It was a Chevrolet one ton, 4x4 crew cab, straight axle with bud rims....Good luck Tyler. Your tires looked good but maybe rotation may help too if you've not done it recently.

[@bennyfernandez5714]

Got a 2019 F250 and at about 9500 miles and about 2 weeks ago I got my introduction to the death wobble. I was in the hammer lane doing about 75mph and went over a overpass and as soon as I started over it there was a bump in transition to roadway to bridge and it started. I thought I might have had a flat at first but everyone I was passing saw it and slowed down and let me over to the emergency lane . Then about 150 miles later it did it again. Almost turned around and went home. On way to funeral for my mom who passed. After calling the dealership they told me about the service bulletin and have me scheduled for November 22 to do fix. I hear its a band aid and may do it again. If it does I have also contacted a 4x4 off road shop to upgrade everything at the tune of 2700.00 which will also include all shocks on the truck to Bilstiens and a new front stearing damper by icon. Told me I was going overboard but I told him if it makes it do it never does it again it's money well spent.

[@nadeenflynn9673]

You definitely improved the death shake, but it sounds like more problem solving is ahead. Must have felt crazy scary!

[@yukoncornelius8669]

steering stabilizer did the trick for me

[@OxAO]

Death Wobble? I thought you had one to many Corona beers? (pun intended)

[@joecruz4846]

I had the wobbles. The tires were the issue. I replaced everything. And at the end of the day , it was the tires

[@kentuckycowboy2]

I saw just this week that they was pushing Ford for a recall on this problem on these trucks. I had to leave Ford in 2005 due to illness and we had the shimmy problem on the early 99, 2000s F250 350s also after hitting holes or rough places in the road. I'm sure they've updated to different suspension steering system since then they like to redesign everything pretty quick now, but the steering stabilizer was what the engineers had us upgrade on them back then to repair those trucks after checking everything else and finding no other concerns. I'm surprised to see a repeat of a similar concern getting so big for them esp on their trucks since they are their best selling line.