I Edited The Same Video on Every FREE Software

[@Alfiethegamerr]

Disclaimer: This video was NOT made in a free editing software

[@backs8189]

yes it was, it was made in windows movie maker

[@amnay_tag]

I would say it's 99% after effects

[@VancaGaming]

Anyone knows the song for Capcut part?​@@amnay_tag

[@Syinite]

RIP Sony Vegas, my first ever video editor 🕊

[@crab-time]

me too bro

[@John-sp9if]

same

[@LuckeGabriel]

Keygen music burnt into my pre-teen braiiiiiiiiiin

[@sajid-g6z]

usss!!

[@gen157]

I still got 2 installers on a drive, but man they do not like anything newer than Windows 7.

[@Ace_Guardian]

Got inspired by you and started a KZbin channel a few years ago! I learned editing from your tutorials and now, I've finally reached 100k subs! Thank you, Finzar!

[@Trufflo_]

shorts maker, subs invalidated

[@Wintellshorts]

Subs not invalidated there are long form videos with millions of views bro. Get a pair of eyeballs before you insult someone. Congrats on 100k!

[@Trufflo_]

@@Wintellshorts i want someone over 13 to like his content

[@Lighter7900music]

Had watched a video of yours. Congrats for 100k!

[@rabbitholeseeker]

@@Trufflo_ Being jealous over someone else's success is not the way lil bro. 😂

[@exakou_edit]

The Intro is on Another LVL!

[@exakou_edit]

I Got a Heart from my Senpai! OMG!!!

[@Lightning-e7h]

Do you know how to remove the water marker for free in Filmora when you export?

[@gg-manager-content-creator]

cap cut has motion blur you can easily find it in the Video then scroll down and look for motion blur it should be below the camera tracking and yes you can keyframe the effects

[@Lightning-e7h]

I use cap-cut but im a bit foggy on how to use the keyframes there, anyway, thank-you for your help

[@gg-manager-content-creator]

@@Lightning-e7h They changed the name of it to variable speed animation you can find it if you put a keyframe 1st I used capcut all the time for clients and some 2motion graphics for companies its really good if you know how to play around with it

[@ZenNakashima]

Damnnn, that intro thoo ...

[@Nandoooooooooo.o]

Fr

[@GATOCHATOKKKKKKKK]

ok eu n esperava um br aqui

[@oOPdsempre]

mds e o zen

[@leinad3773]

I don't recommend animating stuff in davinci edit page (assuming you want it as smooth as possible), it's kinda chalked. Doing it in fusion is so much better (also theres motion blur setting in the fusion transform nodes). For anyone not using fusion, LEARN IT it's so good once you understand it.

[@skapeedits]

@@leinad3773 yeah you are right, I still wish tho they would improve the graph editor in the edit page. layers are just better for simple animation and keyframes

[@xeno-minecraft]

agreed

[@jhxc64]

Can attest. Trying to ease position keyframes doesn't actually ease them properly. Fusion is super powerful and much better for keyframing (only for super powerful computers, tho)

[@bigzack37]

how did yall learn how to use fusion😭i’ve used it but only following tutorials and i still barely know how to use it

[@jhxc64]

@@bigzack37 I learned by spending four years working in other node based programs lol. That's the only way I was able to wrap my mind around Fusion

[@Ilya_Yatsko]

DaVinci is absolutely incredible! Love this software after 1 year of using it so far

[@Hammergamingandriffs]

but laggy

[@ニコラセ]

@@Hammergamingandriffs That’s probably because of your computer since Premiere Pro is laggier and crashes more

[@Hammergamingandriffs]

@ I use mobile

[@Hammergamingandriffs]

@ if you probably just use it I think you’ll understand

[@ニコラセ]

@@Hammergamingandriffs Makes sense after all it’s made for pc

[@MrPemmfub]

DaVinci is based

[@A_Commenting_Pog_Face]

Incredibly based, even.

[@Frankabyte]

As a DaVinci user, I greatly agree with this statement

[@Rishab19-x1u]

PP is papa(dad) of editing software. You poor people choose davincie bcz of lack of money and youtuber video about this (they make bcz they get view when they talking positive thing about davincie resolve)

[@CaptainGuluGulu]

​​@@Rishab19-x1ufirst,learn English. Secondly, Premiere is a great software butt it crashes too much and is too expensive. Davinci offers literally almost eveything and more that was in Premiere. The thing that holds back davinci resolve is lack of tutorials and that people are so used to Premiere that there is free assets all around the place. You need like 2 hours to find assets that are enough in davinci resolve

[@Kongnificent]

​@@Rishab19-x1uJust bc you spend the money doesnt make youna great editor champ . Ive seen some great edits out of Davinci. Its not about money its about getting started. I use premier

[@CraftyMasterman]

SHOTCUT MENTIONED!!!! 8:57 thats meeee

[@PolygonalDesign]

oh em gee it's the redstone guy!!

[@enderprism]

i expected you here lmao

[@DiamondDepthYT]

Yo no way you use Shotcut?! I was using Shotcut for 4 years before I moved on lol

[@CraftyMasterman]

@@DiamondDepthYT 7 years strong

[@jmvr]

I love ShotCut, and the reason why I first used it was because DaVinci doesn't have hardware rendering support on the free version, so rendering a 10s video took 1 hour. On ShotCut, an hour long video took 25mins. Once you get used to it, you can crank out edits pretty quickly.

[@juanposo]

Any Linux user immediately would've thought about Kdenlive, it's open source and it feels so frickin smooth, I don't really like it that much tho but that's personal preference

[@pigggy96]

blue comment

[@judgegroovyman]

yes he should have added that one in. its pretty good tbh. maybe in the next one

[@JanbluTheDerg]

Yeah, felt disappointed that it wasn't mentioned. But oh well.

[@aldo6532]

Nice reminder! Does it still crash as often as it used to? Or is it better now?

[@judgegroovyman]

@ stable for years

[@rano12321]

Instead of using the transform modifier in Resolve, if you use the transform under the OpenFX category, it has motion blur built in under the animation settings, kinda just like Premiere pro. Also, to get a quick ease out and in of your keyframes, you don't have to open the curve editor, you can right-click on the red diamond keyframe in the inspector right next to the parameter you are keyframing and chose east out or in. You can also apply the transform OpenFX effect on the adjustment clip instead of going in Fusion.

[@KuoIsHere]

I was gonna say exactly this, the openfx transform is a LIFE SAVER! But adjusting your keyframes is always better for the smoothness, I rarely use the ease in & out unless its for text

[@TeamA-f2i]

I don't know any person that make transform animations inside edit tab lol

[@rano12321]

@@TeamA-f2i I use fusion more than any other page, I spent most of the time in Fusion standalone as it's part of my day job but if it's some basic keyframe animations of position, rotation, scale etc. I do it in the edit tab, as it's faster for me to do that.

[@KuoIsHere]

I do it for animations like what Finzar did, Little things. Anything more I'm going into fusion ​@@TeamA-f2i

[@rano12321]

@@KuoIsHere i agree which is why i said "to get a quick ease out and in"

[@MzCatieShorts]

I dropped adobe about 6 or so months ago and moved to Davinci... once i found out how to use multiple displays with it, it became super comfortable to use and ive been slowly getting better n better with it.

[@Hoodonomix]

And what do you do now, brother, job or freelance?

[@avdpost]

It's admirable that you do animations like this is Premiere at all. As someone who uses Resolve and Fusion a lot, there is a reason why animation tools are designed for animating. Fusion and After Effects would make this process so much easier, especially in regards to motion blur.

[@Stricknines]

Running after effect just for motion blur seems a little extreme when transform can do the same thing lol

[@avdpost]

@@Stricknines I totally agree, but I just feel like we are comparing editing applications on their animation capabilities vs their, you know, editing capabilities.

[@kaste_ll2139]

Im busy, delete and post the video later

[@zillatoo]

💀

[@0iqBita117]

bro is the mc

[@yuhanperera1032]

Top tier comment

[@gues.t]

the world revolves around bro

[@kerhabplays]

Bro's the only one who doesn't get media offline error

[@dy7296]

2:39 Actually, you can also use Fusion for that. Fusion may look intimidating at first, but once you understand it, how much you can do is wayyy broader.

[@PawFromTheBroons]

And have a way better keyframe window, for smoothing animations.

[@dy7296]

@@PawFromTheBroons yup, the spline

[@be8b]

yeah it took me like 1 week until fusion was soo easy for me

[@gyaniIsfailure]

I learned after effects but still i chose to use fusion because i feel more relaxed while staying in just one software.

[@Ju5tJeff]

The intro is crazy. Loved this vid! The fact that you got so much out of those free software's baffles me lmao.

[@Duccgamer]

Yooo Jeff!

[@vibingwitheddie]

Hiii

[@Sar_void]

Yoo

[@Nerdeany]

It’s the break a leg guy!

[@FordosBrickfilms]

Yo it's Ju5tJeff!

[@Nadanubia]

I've used many Video editing software from After Effects to iMovie to Premier Pro to Davinci. The only one that stood out was Capcut! By far it's full of features and a smooth workflow. Designed for beginners to turn them into designers

[@smartx1-s2d]

You're right. Capcut is simple and for beginners

[@FeuerMurch]

So what you should know is that even in the free version of DavinciResolve you can use motion blur in your animations. So when you make the animation instead of editing it in Fusion (the thing with the nodes), you can check motion blur and adjust values ​​like the strength or the shutter angle. Great video though

[@aryski217]

You actually don’t need to go into fusion to use an adjustment layer, just click on it on the edit page and go to the inspector. As a davinci editor though, the fusion page is definitely worth learning

[@mbvisualedits]

Just a Qucik tip for anyone using Davinci. Its better to use Transform in the Fusion page(nodes) there are a lot of options and oh yeah you can just turn on Motion blur in Fusion transform you can also adjust it to your liking right in the node. So if you are using Resolve I highly recommend learning how to use Nodes in Fusion. It's not that hard and it will improve your editing 10x.

[@BingeCam1]

0:16 piracy ✨

[@ia.speedcubing]

Fr

[@CrazyCobraCC]

I cannot figure out how to fly the black flag…

[@joshymeow]

if you're a big content creator they'd actually try and find out if you are pirating their software or not. very scummy considering it wouldn't change their income at all if a single individual was paying for their software or not.

[@AwesomeCamera87_HD]

He is in the desert not in the ocean

[@sexiestdogalive4420]

Do this if you want your channel to become a Tesla bitcoin scam channel

[@techan21]

I edit videos in shotcut and was about to switch to Capcut. After watching the video, I realized that I need DaVinchi. Thank you, you saved me a lot of time that I would have wasted until I figured it out myself

[@exile8110]

Yeah I used to use shotcut but it kept crashing so I went to davinci. It’s pretty good!

[@Relaxo-h3k]

Watched it a couple of times.. i crack up everytime I see the filmora headshakes! I understand completely!

[@samuelvisuals001]

As a Davinci Resolve user, I felt so so much pain seeing him do the keyframes in the edit page Brooooo the fusion page would do it in seconds, and way smoother and less stressful, you never even needed that directional blur Ahhhhhh..... My chest 😢😢😅

[@videodimension69]

Davinci should just more friendly towards people switching from premiere.

[@kanavwastaken]

Davinci is a movie-grade software 💀​@@videodimension69

[@DBD_CHRISTFL]

@@videodimension69um there is a setting were you can make it like a pr setup. Also it’s really a good software. Definitely better than premiere

[@999WRLDEVERYWHERE]

Looking for this comment 😂

[@SelfTitled76]

you can use transform properties on an adjustment clip in DaVinci to zoom and move an entire timeline, saving you from using Fusion!

[@vavetv]

I've been using Davinci Resolve for more than 2 years, but I learned a lot more in this video. Thank you Finzar, you really are the founder of editing!

[@Chanelgd]

dont consider filmora free to be an option. you cant even export without the worlds most atrocious watermark ever made, right in the middle of the screen through the whole video🔥🔥🔥

[@Aarodd.rl1]

Bro your edits are on another level.Love watching these, always using your tips, presets and adadvice!👍

[@cheese_puff]

13:39 Yes you Can, just letting ya know, I edit all my vids in capcut so ik a lot about it, and yes you can

[@irfangamingacademy4620]

How? I use the Blur effect but can't keyframe it; I only change the intensity of it. I love using capcut, so it would be great to know more about this.

[@alounheart]

this was actually quite informative. definitely gives me a better idea of what I should learn. Thanks bro

[@odddellarobbia4]

When you used premiere so much that you feel lazy to even switch to another software

[@ScarkYT]

My wallet told me to switch

[@ascendedit]

​@@ScarkYTalways set sail brother!

[@backs8189]

@@ScarkYT you know how they say to avoid the thief's of the sea? in this case, they're your best friends.

[@charlesthomas5956]

​​@@ScarkYTDon't listen to those saying to become a pirate! It's a trap!

[@xenocromium]

MORE VIDEOS LIKE THIS, PLEASE. This was amazing

[@GreyTOMax]

wE WANT MORE DAVINCI STUFF FROM YOUUU

[@Rubeking_]

I think there is a workaround on capcut to keyframe certain effects. You right click on the effect then create a compound clip & from there you can use keyframes. Some effects also have sliders on the right hand side where you can adjust filters, size, rotation etc where you can also keyframe effects. Great video as always

[@Simtatic]

I used Shotcut for a long time. Its easy to learn but its very basic and incredibly unstable. Davinci is probably the king of free editing software

[@israelcrawford8734]

the intro is so good, you're clearly an amazing editor. I am not even interested but I just clicked the video because what you did here for the editing community is great.

[@ninjaredfirehot]

I actually still have an older version of Capcut, which does have pro only features but most of the stuff that is pro now, such as auto captions, I can still use! Plus the layout looks nicer with less "ads."

[@mukeshpathak7302]

which version is that? do you think I can still find it online?

[@ninjaredfirehot]

@@mukeshpathak7302 I'm not really sure to be honest.. Somewhere around V1 or before? I don't think they used versions to download the software. I'm pretty sure they use 1 downloading software/exe, which means that if you downloaded the exe 2 years ago but never installed the software until today it would just give you the newest version. In contrast to software where you download the Version number you want and it would give you that version (For example Blender V4 is out but you can still download V3). Possibly if you downloaded the software and then traded out the files for and older versions files then maybe but I'm not sure how to do that.

[@TaylorRCastle]

Holy cow! 🐮The production value of this intro is on a whole nutha LEVEL!

[@fantorangeneditz]

some capcut tips: to add motion blur, press Alt+G to turn it into a compound clip. Then add motion blur at the bottom of the video tap. Also, most effects do have keyframing, including blur. Maybe you filmed this before they added effects keyframing?, but that was several months ago.

[@mukeshpathak7302]

does Capcut has effects keyframing feature available now?

[@fantorangeneditz]

@@mukeshpathak7302 yes

[@josephryancarroll232]

@@mukeshpathak7302 yes they do

[@crimsonthreadsoffical]

You are an INSPIRATION to me as a video editor but in this video you express your thoughts and make me think about it as well.

[@newestl-ji4n]

3:27 that's why it's called the conFUSION page

[@CompilatieMeneer]

I started on hitfilm express when I was about 11 year old now I'm 18 and an actual video editor but still it holds a special place in my heart XD

[@FluffyPuppyKasey]

You include Shotcut but not Kdenlive. Also: 11:23. Final Cut Pro has entered the chat

[@tamius-han]

Yeah, I kinda hoped to see Kdenlive in there. (Mostly because I remember it being kinda bad 10 years ago, but I haven't checked on it since). I also noticed that he didn't hate himself enough to edit videos using Blender, that one would be fun.

[@mapasekavryman]

I came to see how hard it will be to transition to da Vinci and you are absolutely incredible. Thank you for the walk through

[@PeeJ_ENT]

Welp check this off my ideas list

[@7gears312]

This video must have taken forver bro, it already takes forever to edit a single video but doing it over and over again and learning the software is just over the top.

[@leoneedr]

davinci also has motion blur as a tick! but its if you use nodes

[@itsabout-v3k]

Your videos are always so well-paced and engaging. Fantastic job!

[@Waylonwars]

Putting Davinci in here is so unfair

[@CentralNethan]

I mean he did say "alternatives to Adobe Premiere Pro." And Davinci resolve is one that I can think of first.

[@mujental]

Damn Bro!! This is your best video so far imo!! THATTTT IIIINTRO 🔥🔥🔥🔥

[@naimurX]

I love davinci. It's free 🤑🤑

[@Stricknines]

@@naimurX until it’s not

[@charlesthomas5956]

That emoji you included in there kinda implies you're probably the type of person to not share his/her money with anyone.

[@jackproductionsrblx]

wtf most video editing videos I see are so bland, this one is actually so peak?!?! yeah you deserve this sub, im so glad someone who makes videos on video editing ACTUALLY HAS GOOD EDITING!!

[@__Pengy]

Wait... he forgot blender...

[@Gamer653Live]

😂😂

[@BloxxerVR]

It’s not an editing software 😂

[@beensinnit]

@@BloxxerVRits got a video editing function in it

[@BloxxerVR]

@@beensinnit it’s called animation not editing

[@beensinnit]

@@BloxxerVR if you look in it one of the project options is video editing

[@mochiemy]

Woah your editing is incredible😮😮 Thanks for sharing the process of editing

[@TeamA-f2i]

Davinci Resolve can beat Pr,Ae,Au combined if they actually focus on making updates inside Fusion. Still I cannot make everything I want to that I can create with After Effects inside Fusion but I don't know if they will actually do that, because Blackmagic mostly make money from selling hardware not software. That's fucken sad. I will rather pay more for Resolve and have features I need instead of what is right now. Who else agree ?

[@skapeedits]

Yes I agree fusion is the best part of the software and they could charge a bit more for it. just curious what exactly are you still missing from after effects? I would guess the biggest thing are plugins?

[@aman34587]

you can make almost everything in fusion and many things that fusion can do but after effects cannot and its is node based what do you need bro people just dont know how to use fusion it is the best thing in davinchi

[@TeamA-f2i]

@@skapeedits Hey! Finally someone that cares about this topic. Before I start I just want to say that I check your channel and your Element 3D and Glow plugin looks very awesome. About the plugins - well yes and no at the same time. Let me explain. The only plugin I wish I have money for in After Effects is GeoLayers and yes having that plugin inside Fusion will change a lot for me already probably but the problem will still exist there. I think that my conversation with Jake Wipp is describing already what I want to say the best. There it is. " Unfortunely there are a couple things that still keep me in Adobe suite. I Wonder if this is possible to make in Davinci Resovle: 1. Movie like "Missing" (2023). I don't really think it is possible with shape nodes, but maybe there is something that I don't know yet in Fusion ? 2. Map animations like this guy for example: kzbin.infoaAgcgQxl_hM I believe this animation is maked via After Effects and geolayers plugin. Is there any way to make nice, crisp map animations inside Fusion ? I watch tons of tutorials about it but its seem like there isn't final solution to that. I was thinking about importing a very high res image of world and then masking out all the continents and countries inside shape nodes, but it still would't be that good probably and what about mixing shape nodes with "NON s" nodes for example if I want add glows to the borders etc. Is there any way to mix shape nodes with non-shape nodes and still have crisp sharp graphic or any other way to do that ? I mean for example I remake Select Tool from Fusion because I want to make some tutorial and graphic like this will make that more entertaining and I do that using shape nodes. Now I cannot mix shape nodes with normal nodes. I know that I can do sMerge -> sRender and then apply glows and another non shape nodes but then I loose ability to have that crisp look after huge zoom in and I cannot control all graphic that I create with single sTransform node and what if I want to animate this graphic with for example using DVE node instead stransform ? In After Effects I also create Fusion's Select Tool just with Shape Layers and I can normaly apply glows to those shape layers or whatever effect I want to, and still zoom in in a huge amount via Null Object or by making precomp and apply Basic 3D effect or however and I still get sharp look with all effects applied. This is complicated or again there is something that I am definetly missing thats why I ask you. Resolving some of these problems might be also useful for other Davinci Resolve users. Its not just about me. This is feeling like so much of workaround for me and that is sad because I love Fusion for everything else. What you think about it ?"

[@skapeedits]

@@TeamA-f2i Thanks! Okay so you are right you can’t add glows/dropshadows to shape layers and it sucks. However a workaround is you can give them a different color and key them after the srenderer or 3d renderer. And then apply a glow/dropshadow to that keyed element. It’s a bit easier that way atleast. Maybe you already did that idk. And the way to get 2d images like a high res map onto shape layers is using an extrude3d node to bring shape layers into 3d. Then you could add any texture as a material on those shape nodes. And you can also add 3d animations, when you work in the 3d system which is also a plus. And lastly if you quickly want to get map shapes you can try to find a map where the borders are transparent or that is black and white. Then use vector snapshot to convert it to polygons and then polygon to spolygon script. Then you don’t have to mask the shapes manually. For that look for extruding logos or vectorsnapshot on KZbin. So the workflow would be somewhat like this: Find 2 maps that match decently to each other. One with the satellite texture/or other details. The other black and white (so the borders are white and the country black or the other way arround). Then lumakey that image and plug it into the mask Input of a white background (vector snapshot needs that to work). Then run the script, which will give you a bunch of polygons. Select all and run the polygon to spolygon script and delete redundant shapes (sometimes it adds extra ones). Unfortunately spolygon and polygon use different coordinate system so it will likely be stretched. Use a stransform afterwards to fix that. Then you add an extrude 3d and extrude the spolygons and an imageplane that you place slightly behind them. On the image plane material input you can add the high res image. If you want to zoom into a specific spot you can put another smaller image plane there so when it zooms in it will transition from the big high res image to a zoomed in image of that specific area. Then you have basically 2 layers: the shape layer on top of the realistic map layer in 3d. Than you can start picking specific countries from the spolygons and adding soutline for example or other shape nodes or stext. Then you can add a 3d camera/3d renderer and do your camera animations. And if you want to make specific shapes glow or add a drop shadow you can give them a unique color and key them using a chromakeyer/any other keyer after the 3d renderer. Branch them out and add a glow/drop shadow and merge that back on the overall branch. I hope that was somewhat understandable, I might make a tutorial and I’ll have to see if everything works exactly like I said. This is just what I would image it to work like.

[@skapeedits]

@@TeamA-f2i Something like geolayers is obviously still a lot better. Unfortunately I don’t think it’s easy to recreate and I propably couldn’t do it. But I hope these tips help a bit atleast!

[@TJ_OFFICIAL_MELB]

man the last time i watch your video, you had like 50k subs..well done brother, your editing is next level!

[@im_downtime]

11:16 Switch to Final Cut

[@joeyunderwood]

literally! was just coming here to say if he likes iMovie’s UI, it’s basically just a simplified free version FCPX

[@Beansent]

davinci has a transform effect that does the same in PP. but I saw another comment that animating in Fusion is easier yes I highly agree and its so easy to understand as well. fire video fin!

[@DaviJohns]

pp

[@LIGHTYP0]

Fire video

[@OldAndyFitia]

Davinci Resolve has ways for Motion Blurrrrr. You either stay in the edit page add the transform (Open Effects ) and there is a mition blur optionnnnnn. Or you can go fancy in the Fusion page

[@AndroidCowboy-t3e]

you forgot kdenlive

[@karthikp7247]

I was actually a capcut and davinci editor and there is a option to add keyframe to blur effect also in capcut.

[@TrueEasyTech]

99% of you will probably not see this but I hope that you all are doing well and are having a good day

[@HillaryCharlie.J-m6x]

We see it and thanks👍

[@JSmith-sm6fv]

Fin does everything to avoid the fusion page in DaVinci😂 I wouldn't want tp touch nodes either if i didn't have to context: moblur is available in the transform node in fusion, so you don't have to manually recreate it

[@PrimeAdistron-f3m]

6:48 brooooo needs a break ☠️🤣

[@chanGameForceGreece]

Bro the intro is lit! Great job

[@FFacelessFacts]

hey finzar i think if you were the one editing your vids before, I think I am used to watching it the previous way, noticed you were looking for an editor but I think the previous one's better tho its also good, also around 14:25 there was a change in lighten and also where is our god finzar with God's voice who always challenges finzar :(

[@nikhildaiya]

Your assets are too good man!. Awesome video👍

[@unkown9081]

Bro botched the DaVinci video. There are so many easier ways to do what he did 😭

[@schrumb]

ironically enough, lightworks has been the first editing software i’ve used long term that felt the most intuitive to me. i use it to edit all my video and rely heavily on making visual effects and animations on it even if it’s not really built for it. this may be biased since i’ve used it for years but now but a 10 minute video of pure animation takes me just a couple of hours

[@caioz3821]

Lightworks first introduced me to keyframes. I would play so much around with it and it looked like a easy simple keyframe system. But that was how I got used to other keyframing systems

[@PokedByAStick]

What is the music from 10:40?

[@SuperTost104]

Mii channel theme

[@PokedByAStick]

@@SuperTost104 thank you for this, I looked through hundreds of Nintendo songs trying to find it 😂!

[@davidjay24]

Intro is insane. Thanks for inventing editing finzar!

[@JJ.747.gt.]

“I love editing so much..” *silence*

[@mkFix-pl]

Sooo. your claims about inventing video editing. According to google: "The earliest device that can be attributed to video editing was created in 1897". Which only means one thing. Your skin routine is of the charts. Well done being so old and looking so young!!! 🥰

[@Vexiusssssss]

👇if your timebar gets pink near the end

[@TaylorRCastle]

You are a CHAMPION! I don’t have the 🥜 to try any program other than Premiere Pro lol BUT you’ve inspired me to dabble with DaVinci Resolve

[@NicholsMediaPress]

Casey Faris, Patrick Stirling and Peejent are really good to KZbinrs to learn davinci from

[@TaylorRCastle]

@@NicholsMediaPress Thank you, bro!

[@freddyfireMain]

@@NicholsMediaPress dont forget jamie fenn for cool effect tutorials

[@NicholsMediaPress]

@@freddyfireMain YEP!

[@just_mdd4]

You edited on every free software? Where's Blender? 🧐😝

[@BoostRL]

this got me laughing a lot bro 😂 great vids mate and very entertaining 👌🏻🔥

[@CollectorBlox]

Finzar was born to edit!!! 🐢🔥🔥

[@gursimransingh8475]

what a wholesome video bro love your work

[@marvelhistorian353]

As an editor of 35 years, every time I heard you say "I invented editing" a little fire burned angrier inside me.

[@Ilya_Yatsko]

2:43 You could just use transform node in Fusion to animate your PNG and apply motion blur which is there by default just like in Premiere Pro (and editing keyframes with "Spline" menu in Fusion would be a way nicer experience than in Edit page)

[@阿公-x2j]

Your visuals are so lively, whether it's the materials or the text, they all have a bouncy feel. I really want to learn how to do that. Is it all manually set up?

[@Foxevent38]

Bro I love your every single videos and I am your new subscriber ❤❤😊

[@1280-user]

@2:44 you can find an effect called 'transform' in Effects tab, drop in on your clip and you'll find in in Inspector -> Effects tab -> animation -> motion blur

[@noelrobinson2307]

So entertaining, you make me feel like doing the edits myself, but i know too well i will get obsessed lol

[@OsDijider66]

BRO HOW ARE THESE THUMBNAILS SO GOOD

[@Dstick1Spearfishing]

That was sweet, loved that intro, but scared to think how long that took to make. Cheers for sharing the video and laughs, stay safe, have fun, enjoy life! 🍻👍👌🤗

[@GabrielM01]

No Kdenlive is criminal

[@GabrielM01]

specially when you used the absolute piece of nothing that is shotcut

[@GudielDePaz]

I would like a tutorial on how you made the introduction of this video, the animations, whether the settings and characters were made with AI, and how you adapted the color to integrate them into the same setting, thanks for the great video!

[@Prismarine_Man]

As a person who's been using Davinci for a year... ... I never knew you could do all THESE !!! I had to watch some tutorials ! Do you have some ?

[@EviesDeskYT]

Me: editing on capcut Also me: begging for after effects

[@AlisilCervo]

I WANT A TUTORIAL JUST FOR THE INTRO! EVERY DETAIL. That was just fire

[@AIVisualBlend]

In Capcut you can Keyframe the increase and decrease of a blur effect. Great Video!

[@dg55661]

hey i just wanted to say, you have been so helpful for helping me learn how to edit cool effects and enjoy it more. Thanks

[@RobinVariety3446]

Shotcut brings me back, my first video editing software before I started using Davinci Resolve 2020-early mid 2022

[@TerryPress]

i use filmora. i love the design. It is complex yet feels simple with The round corners and green colors.

[@vsp.j0sh]

9 Year old me sitting in the corner wondering why I used Olive of all things. So glad I legally acquired Premiere Pro and Video Star. Looking back I have no idea what I was thinking. 😭

[@pinankjain1892]

bro is lazarbeam of editing community 😂😂

[@yassou_p]

0:20 LOVE THE REFERENCE ! The the good the bad the ugly