Fire swirl tumbler tutorial using alcohol inks on epoxy

[@LostSiren13]

Wow. Looks like molten lava. Awesome tumbler. ❤❤❤

[@debipresley5378]

Thank you, you showed me it’s ok to just keep adding and working to get what your looking for.

[@Sulzie65]

Very pretty cups. Love the glow over the lake scene.

[@sonyameyers4587]

These colors are absolutely beautiful together. It would be nice to add the final product the next day to this video.

[@crystlecox]

Absolutely enjoyed listening to you doing this . Awesome cup . And the bug on suicide mission would be so my luck . Cant wait to try this myself

[@oldmovies963]

Very nice. Thanks for sharing.

[@kimberlyrinehart1120]

I love watching your videos. They make me want to try a tumbler. 😁

[@ThePurpleStitch]

You’re so sweet! They are definitely fun to make and a labor of love! 😆

[@cindylapeyrouse4680]

I have that problem with dry spots also

[@lilycessna3077]

AWESOME! hubby wants another orange cup, I'll do this one! Thank you!

[@bigcountry734]

I’m just beginning, I run into issues with dry spots. I’m in Texas gulf coast area working in my garage. On first coat of epoxy how smooth does it need to be, and does it matter if I use more epoxy than needed. On alcohol ink can I add as much as I want or such I limit colors and amount. Then letting first coat cure, do I just leave on turner the whole time. Then what’s your process on second coat, if it needs sanding, more ink, etc. on final epoxy how do I make sure it’s smooth all the way around

[@smisplacedalaskan1762]

Thank you exactly what i was looking for.

[@ThePurpleStitch]

Awesome! I’d love to hear how it turns out! 😁

[@jenniferann7375]

I’m going to definitely try this tomorrow

[@patriciagregorowicz8141]

Pretty! What decal are you going to use, if any. Thanks for sharing 👍👏😊

[@ThePurpleStitch]

I think I did the traditional fire department logo on this one.

[@Mkemphues1]

I left my window open once, and the gnats got through the screen. Next morning, there were gnats stuck in the epoxy just by their wings. Looked like a gnat carnival ride.😂😂

[@marshaschenkel6438]

What decals did you put on this cup? It’s wonderful. Thank you

[@cherreel5021]

I followed the tutorial but after dried I have way more yellow than want. I watched you again. On my next coat of epoxy can I fix those areas with more ink?

[@ThePurpleStitch]

I have definitely done more than one layer of ink, go for it!

[@archiebrown7327]

What causes those spots or it to separate around the top?

[@kierrakey5741]

Hello! This was very helpful. I just started making cups!!! Is there a certain kind of sand paper I need to sand my cup?

[@ThePurpleStitch]

Usually a pretty fine grit works well between layers or to prep.

[@ritagruzman3263]

Thank you. Where do I buy this spinner?

[@ThePurpleStitch]

I built it when I first started since there weren’t really many options on Amazon. If you or someone you know are crafty, you can find how-to videos for them. Or, there are some great reputable makers on Etsy. 😊

[@Herbnerd73]

I actually like the yellow in there

[@ThePurpleStitch]

Thank you!!

[@scrapn4fun13]

So pretty. Have you tried dropping just plain isopropyl alcohol to break it up some?

[@ThePurpleStitch]

Not yet, I just saw that mentioned somewhere recently though! I think it might have been a comment on a video not too long ago. I’ll have to try it soon! 😁

[@brendaepp4596]

My favorite

[@pamecreations422]

Hello, congratulations is amazing I really loved that’s what my husband want it can you please share me the names of the alcohol inks please?

[@ThePurpleStitch]

The inks used were Tim Holtz teakwood, a little bit of Ginger, Poppy Field, honeycomb, and Piñata brand calabaza orange & sunbright yellow. 🙂

[@danssv8]

Love your ink jobs

[@ThePurpleStitch]

🥰 thank you!!

[@candicechestnut8916]

Love this cup ❤️ Quick question...when you're preparing for a craft show how many cups do you take? Obviously this is July 2020 and we're not going to any shows this summer...but I'm just starting to make cups for my family and I may do some craft fairs this winter... maybe! Lol

[@ThePurpleStitch]

I took about 20 to the last show but wish I’d had more. I’m prepping to have at least 40 ready made and on hand for the holidays this year.

[@KWells27055]

You mentioned the waves on the first cup. I ended up with that on my first cup. How do you fix that?

[@ThePurpleStitch]

Another layer of epoxy with less heat. That can cause waves.

[@plotnicovalilia9662]

Hi. You sand when you finish the cup? If you do how you make it? Thanks for your tutorial, it exactly that I looking for. And, one more question, if y don't sand when you finish, a work and colors look like glass. Thank you

[@ThePurpleStitch]

I do not sand after the final coating of epoxy. Only when I am adding another layer of epoxy or just before I do the decal.

[@honey562012]

What ever happened with the bug? I was laughing as you were talking about the fly episode. Your cups are always so pretty. Thanks for sharing.

[@ThePurpleStitch]

If I am remembering correctly, I was able to squish it or shoo it out. It definitely did not land on the cup, thank goodness!🤣

[@teresarandle6977]

Can you use a blow-dryer if you don't have a heat gun?

[@ThePurpleStitch]

Technically yes. But a blow dryer will do more air than heat.

[@debbiesutton1037]

I get so many dry areas or fish eyes that I usually acetone it and start over. How do you avoid them? I never have seen you have any spots like that.

[@ThePurpleStitch]

I’ve definitely had to battle with them, but since I started making sure NOT to touch the cup with barehands beforehand it seems like I don’t have them so bad.

[@nicolehamilton5953]

I keep getting the divots or those eye spots. How do I get rid of that? I epoxy, sand, decal, epoxy, sand, and epoxy and I still get dimples like. Or whatever their called.

[@ThePurpleStitch]

What I’ve found that seems to help a lot is not touching with bare hands and also a clear coat of spray paint on top of layers that are giving me trouble.

[@007380]

Which epoxy are you using and what are the ratio's your using to mix it?

[@teresakoranda5585]

Do I need to prep a plastic tumbler like I would a stainless steel?

[@ThePurpleStitch]

Teresa Koranda I have no idea. I’ve never attempted epoxy on plastic. I’ve read that the chemicals don’t do well with plastic. I have not done thorough research into it, so I have zero advice on that one. Sorry!!

[@teresakoranda5585]

The Purple Stitch thank you

[@GGscrafts]

Hey lady .... so I have tried tumbler using white with a few other ink colors and it’s like it dried out in places and in some places the epoxy thinned out down to the cup itself . What am I doing wrong ? Any suggestions ?

[@ThePurpleStitch]

I am almost certain my dry spots were from touching my cup with my bare hands. I can’t recall it happening again since I made the connection. Try not to touch it without gloves or with a paper towel. Hope that helps!!

[@cuttastarminis6305]

What type of turner do you have that can be reversed? Beautiful cup!

[@ThePurpleStitch]

It’s a microwave motor on the one I built. Some other turners also can reverse. 🙂

[@carlajoan4753]

What do you have inside the cup to hold it in place? Is that the rubber mat you put under a rug? Also where did you get your tumbler from?

[@ThePurpleStitch]

Yes, I have shelf liner wrapped around my pool noodles and foam pieces for each attachment. I get most cups from stainless depot but also buy at Walmart and Buccees.

[@marlamakley-alden5299]

What holding your cup? I see the blue noddle and something else

[@ThePurpleStitch]

Marla Makley-Alden it’s a pvc arm on my tuner. I wrap my noodle with shelf liner when I need more bulk and grip.

[@marlamakley-alden5299]

Can you show me please what the inside looks like? Also do you have a Facebook page? Love follow you.

[@judygroves9990]

Beautiful!

[@nicoledickel4360]

Where is everyone finding the white alcohol ink from?

[@ThePurpleStitch]

I find it on amazon and at hobby lobby most often.

[@nicoledickel4360]

@@ThePurpleStitch thank you! Also do use a sealer after if so is it epoxy?

[@kathyhanlon1542]

Do you wear a face covering of any kind when using the epoxy?

[@ThePurpleStitch]

I do when I use a heat gun or a torch.

[@Belle21137]

Can you add too much alcohol ink?

[@ThePurpleStitch]

I believe you CAN add too much. But I’m not sure what the limit would be. I think it affects the epoxy curing properly.

[@kaiseeable]

Yellow is my favorite color! What color is that?

[@ThePurpleStitch]

For this one the two yellows were Tim Holtz honeycomb and Piñata brand sun right yellow. 😁

[@ZX10R203]

Can this be done on plastic tumblers??

[@ThePurpleStitch]

I have heard mixed information on this. The main disadvantage (other than the possible chemical reaction) is that plastic isn’t rigid enough to keep from cracking the epoxy. I’ve seen people do it successfully, but I don’t plan to attempt it.

[@ashleyburgin777]

Do you have to sand these cups?

[@ThePurpleStitch]

It’s never a bad idea to sand for a good grip.

[@CrazyGreeneyedCraftylady]

Do you sand this? Or is this the finished product? Or do you epoxy one more time?

[@ThePurpleStitch]

I epoxy one more time.

[@Mrsangierice]

Bello!!!

[@victoriahallas4144]

How do you get it to blob like that? Mine keeps coming out streaky 🙃

[@ThePurpleStitch]

🤔 I don’t think I do anything special...is your epoxy too thick and it gets too much horizontal movement?

[@victoriahallas4144]

The Purple Stitch as soon as I drop it down, it just streaks and run down the cup... I’m gonna try a different direction putting it in a see 🤷🏼‍♀️

[@mcgeecoil6960]

What kind of turner do you have? I want a turner that the arm comes off.

[@ThePurpleStitch]

I made the one I use in most videos. I have two mini turners that are removable but they aren’t on amazon right now. I have 2 more I’m about to test out and I can report back on them if they’re removable. One is here and ready to assemble. The other is on the way.

[@PartyRockKing23]

You gotta use male and female connectors for pvc. At Lowe’s etc.

[@lilycessna3077]

Are you using a hairdryer or a heat gun?

[@ThePurpleStitch]

For this one I think I was using my d embossing gun from the scrapbook section. But I have this beast now and it’s great. More heat and less air, amzn.to/2MmgCkI.

[@cherylg46]

Could u just use a straw & gently blow it in the direction u want it to go instead of taking it off & moving it all around? I don’t know,just thought. Tia

[@ThePurpleStitch]

I would think you could as long as the epoxy is runny enough. There may not be as much movement but might be a good alternative if the arm isn’t removable. Just keep in mind the fumes you might be breathing in if you heat it up. 🙂

[@paganpeace]

I had a fly land on a cup that i left overnight....i almost left it because the cup was a bettlejuice cup

[@ThePurpleStitch]

Omg! That’s so appropriate but still gross and the same time! 🤣🤣

[@paganpeace]

@@ThePurpleStitch I ended up taking it off. Didn't want someone who would be grossed out by it.

[@ThePurpleStitch]

@@paganpeace I think we’ve all been there!

[@PartyRockKing23]

You need to make sure you get it all done at once. Because the later you add color like the brown it will just look like ameba.

[@ThePurpleStitch]

Unless you heat it and manipulate it more.

[@nikkilynn8559]

HAHA suicidal bug....if I had a dime for every bug that landed on my tumblers, I could retire!!! I think all the flames got to him!!

[@ThePurpleStitch]

🤣🤣

[@unknownidk4452]

Haiw