Firmware Update ds100/150E Clone. 2020.23 Free for Subscribers.

[@YOYODiagnostic]

Before you ask a shitty question, watch the video, use your head first to ask and don't leave comments on KZbin like: give me this software, or: you have a link for the software. If I waste my time to explain and show you at least you have respect to watch this video and then you can ask. I m quite explicitly in the video and if you watch it write quite clearly during the filming what interests you.

[@terhoxzz8209]

Good Job man very informative and to the point, well done

[@butwheresthebeef]

Thanks a lot for your videos, helping us stingy dudes, buying crap because trying to safe a few bucks... you are a man of honor!

[@YOYODiagnostic]

Thanks 👍

[@abreiz1]

Great Job. We need more educators like you. We all must appreciate that you do this in your time to educate other. Keep it up.

[@YOYODiagnostic]

👍

[@MIKEROSOFT44]

Hi Yoyo........i have single board 150 i plugged in to car and clicked update.....but still has 1622 firmware.......as i dont have 3201 firmware to replace the old 1622 firmware could you tell me where to get it from thanks

[@meca13b]

Always informative , keep up the good work .

[@iGONextGen-kc6qf]

Excellent instructive thanks for the effort

[@reinforce2004]

Very useful information. Nice video. Thank you. It is understood that this update is not recommended for dual board version? Unfortunately, I have the dual board version with firmware 1622 on it :(

[@mildfur5180]

Thanks a lot for your videos.

[@thebethlem]

Good Job man very informative and to the point, well done

[@YOYODiagnostic]

👍

[@justgodfatherme]

​@@YOYODiagnostichelp with download,i don't see yor email Thanks

[@pantsi]

Thanks for the informative video...!! How we know what board do we have? I have only the programm working and i need a module...what module should i buy?

[@rogelioangulo703]

Great work !! your videos are great ! could you please explain How to connect to the power supply ? what pins on the odb cable to be able to update ?

[@striple6752]

Hello, I don’t understand at 15:50. I have a single board good quality should I update ? With 1622 I can not connect to BMW

[@YOYODiagnostic]

Hello, yes make the update to 3201

[@striple6752]

@@YOYODiagnostic how can I contact you for the Firmware ? I have only 1622 in my Autocom 2020.23

[@striple6752]

@@YOYODiagnosticI watched a lot of your videos thanks for the content :)

[@fordfocusgarage2083]

Thank you Yoyo Diagnostic.Nice Video.👍

[@wadburg1]

Thanks for the video. Grate job!

[@YOYODiagnostic]

👍

[@agperfomance9660]

Very good work for update Firware my friend 👌🏻

[@wolfgangrieser7648]

hello! i have problems updating my single board vci to 3201,where can i get this files? best regards

[@jacbac7506]

@Yoyo diagnostic, Thank you for your input...Just wondering...my interface looks exactly like yours, but mine is dual motherboard. Is yours a single motherboard?

[@AMGTOM]

Hi, and really appreciate your work, time and effort, I have same and it doesn't connect at all via USB; still didn't tested with BT, hope you can make a video about reworking this kind of Delphi interface. Thanks Again.

[@tommelomme6761]

Well done! And I like your videos!

[@YOYODiagnostic]

👍

[@bramhartog3484]

Very good explanation! How to update the driver. Thank you very much!

[@shaiknaveedalam7208]

Thank you sir very help full information

[@YOYODiagnostic]

👍

[@MrSeb28]

Thank you for your videos, I was already watching them when I was using an opcom. Today I have a Chinese delphi with dual board and firmware 1513, but they provided me with delphi and autocom 2021 software which requires firmware 1622, do you think I can do this update without damaging the device ? I think many of us have been fooled.

[@MrSeb28]

I've just tried to update my dual board VCI from Autocom 2021 and it works, the firmware is 1622 now 😄

[@dawidpisk6129]

Very good job thank you

[@dawidpisk6129]

Check Gmail please

[@mhm8154]

thank you for alll your educational videos i just want to know about single board clone a+ quality is it good

[@YOYODiagnostic]

Hello. To run 2020.23 is the best of these clones. but quite expensive than spending 100 euros on a clone without calculating the cost of transport plus the value of a laptop. It is more expensive than a Thinkdiag.

[@gerryfinnegan3942]

Thank you for your work. Will the software work in (Linux) VM machine ?

[@sstojsin]

For single board variant, what firmware is better? 3201 or 3201.20 version?

[@DoshaYama]

Firmware 3201 cannot be installed categorically into the dual-board version, at any rate for now. This is due to errors in the interpretation of the ST8 microcontroller on the relay board. May damage your device

[@YOYODiagnostic]

Hello. I explained exactly that I did not install any on the dual board. I installed it on the single board. Thanks for viewing. 👍

[@DoshaYama]

@@YOYODiagnostic Very good. At 1622, the two boards do not work well for BMW from 2007 and up and VOLVO from 2014 and up. Thank you for the video. Happy New Year!

[@netguru598]

Hi can you offer some advice. I have bought 2nd hand one from a guy who's said it was his Father who passed away now -died. I didn't realise it would ask for security dongle to work. The man who I bought it from has offered other software but that didn't help. I have emailed Delphi and explained and asked for a solution around the dongle issue, they have not answered. Do you have suggestion

[@catalino8010]

On my autocom SW I dont have all the options to test , only OBG GENERIC test . For example the Instrument or Brake are not there , im puzzled .. Also you said not to update FW on dual board but your VCI is same as mine and i opened and its double board

[@YOYODiagnostic]

On the outside they all look the same, but on the inside they have one motherboard and two. Some have good quality, others are average and others are throwaway. Not all cars have the option to test, it matters what brand of car you have if the ECU has this function.

[@catalino8010]

@@YOYODiagnostic aha, so either my VCI is crap or my car doesnt have this option , tho my mechanic friend was able to read SAS system with his million dollar OBD reader so the ECU has this function. Probably in this case , my VCI is just some garbage, thats all I can think of

[@catalino8010]

@@YOYODiagnostic found why , i read the autocom pdf file and the car is not supported

[@sedatb.3593]

Hi, im not understand. Also this update just for Single board ? Not for dualboard ??? If dualboard update will brick ?

[@iGONextGen-kc6qf]

How can I get in touch with you for consultation?

[@agperfomance9660]

Very good work my friend 👏

[@YOYODiagnostic]

Thanks 👍

[@deadlyace6978]

Where do you get the download from? I need the firmware folder :) Thank you in advance

[@georgescuion428]

Any news ?

[@david01070]

hello I appreciate your channel this is what you can help me please I need firmware 3201 to use DS150E on Autocom 20.23

[@david01070]

???

[@zizou11100]

Hi, Nice video and now i understood whats the problem og my single board is… But i dont have the firmware 3201… Could you send me?

[@joschakoch5056]

i already have the software but wehre can i get the firmware folder ? i have a single board but at my datas i do not have the firmware folder

[@hemnnigar6594]

thanks bro, actually usefull video.

[@aymanman5232]

Iv got the duel v9 colne...ifound my car but not all functions works..igot ssangyong tivoli diseal engine i cant reprogram my car injectors ..can i use an older version?

[@URBANPULSEAPPEAREL]

I order one and I didn't get the Dongle so now am stuck what product and I can't use it is there any way to do a work around pls ???

[@gezar5333]

Hi, very nice video, very good. I wish to ask, do you have experience of singel board A+ or B+? A+ is the very good one and the B+ is the little bit cheaper one. Do you think B+ can work fine? Thank you.

[@YOYODiagnostic]

Hello. why do you want to pay 100 euros for a clone when you can buy a Thinkdiag or Xtool A30? The original will always be far above these clones. I think the ds150 clone time is up, but if you still want to buy, buy A + single board.

[@KonicaMinoltaja]

Could I have a link to the updated firmware?

[@TheLightMyFire]

"unknown diagnostic id generic protocol with standard information will be used" that's what my delphi clone says conected to my opel. If it is a hardware problem can anything be done ?

[@CrashBashMash]

Is there big difference on boards with white 3v or 5v relays? On aliexpress both can be found. Do you have suggestion for trusted supplier on this cheap boards? btw I had issue connecting to Opel with old sw versions and dual board. On 2020.23 version I can connect and communicate with most modules, it is massive upgrade.

[@YOYODiagnostic]

Hello. Those with quality relays have a good connection. You have at least one : ftr-b4ga4.5z relay on the motherboard ?

[@CrashBashMash]

@@YOYODiagnostic don't think so, they are all red + dual board. So yea, junk board and it still works much better than delphi 2017. Don't know what they did but it is big, big improvement over older versions. Would like to buy quality single board, but finding trusted seller seems to be difficult. That is why I asked if you know trusted supplier for single boards.

[@YOYODiagnostic]

@@CrashBashMash unfortunately everything is lucky when you try to buy from these sellers, there is no one to trust. When they want to sell they do you super service, and when you have problems with the products they are untraceable. Unfortunately the service of the Chinese sellers leaves much to be desired

[@simpaticoteppei5652]

@@YOYODiagnostic YOYO Diagnostic, first of all thank you very much for your precious videos, which I always follow with pleasure!!! Keep going like this! I wonder: is it possible that there is not a serious and reliable seller selling good clones, without these containing fake chips? Thank you

[@ernesto4635]

Hello, can I update my dual pcb board clone to Last Fw?

[@Sony-lg8bs]

What if it cant update the firmware? The software works fine but the firmware needs an update and it starts but fails after a minute or so? I dont know if I have a dual or a single board(its from 2014 I think) but I have the software of 2021

[@florin753]

Hello sir, happy new year! I have a question, which one of this copy are the best, the green nec relays single board, or red ones with 2 boards ?

[@YOYODiagnostic]

Hello. Single board with white relays Nec. For these clones it would be good to change the FTDI chip.

[@florin753]

@@YOYODiagnostic thank you!

[@Marko-2246]

@@YOYODiagnostic FTDI chip is good or bad?

[@YOYODiagnostic]

@@Marko-2246 FTDI Chip is original. Buy from FTDI.com

[@آلغريےب-ق9ض]

مرحبا يا صديقي ايهما افضل ويندوز 10 ام ويندوز لتشغيل ds150e

[@YOYODiagnostic]

@@آلغريےب-ق9ض I don't understand, use Google translate if you need help.

[@eglentgjoni9947]

Hi mate. I've seen nearly all of your videos and I need your advice on something what scanner can I by for hgv? and I mean something affordable Many thanks great job

[@YOYODiagnostic]

Depends on your budget.

[@aqtitheprodasw919]

goed gedaan bedankt

[@ovvoraemqezinch11]

Hi YOYO DIAGNSTICS---1. WHAT YOU ARE DOING IS MUCH APPRECIATED, THANK YOU!! DO YOU KNOW IF THIS CAN WORK WITH apple macPRO and if so which versions, or IT MUST BE windows BASED PC? I HAVE TWO JAPANESE CARS 2006 HONDA ACCORD EURO AND A 2011 SUZUKI APV VAN, AND ALSO HAVE A 2016 BMW 430I AS WELL AS A 2017 E300 MB. CAN I USE THIS DELPHI DS100/150E FOR ALL THESE CARS OR EACH ONE MUST HAVE A SEPARATE DIAGNOSTICS SOFTWARE TO BE DOWNLOADED AND EACH ONE WILL HAVE TO BE PURCHASED SEPARATELY? THANK YOU AGAIN.

[@YOYODiagnostic]

Hello, Is a universal diagnostic tool, but this is a Clone. Original is amazing. Delphi work only with Windows.

[@Protube70]

Thanks for good video! I have 2020.23 software, cant communicate with cars (BMW) My VCI tool is clone from china bought 2017 with Delphi software 2015.r3 Is it double board do you think? Can i some how get this VCI tool to work with 2020.23? Best Regards!

[@YOYODiagnostic]

Hello Open it and take pictures. you have email in contact on KZbin.

[@o.ko.k7550]

@ YOYO Diagnostic - first of all you have my Abo - i dont understand now you want help us good but you say this new version not good not stable that means we dont need this?When is not good not stable!- 2015 or 2016 is better than this 2020 ?

[@YOYODiagnostic]

Till now the version 2020 is the best Chinese version. I can't help you guys because I'm on vacation.

[@guda12]

I have the old Autocom Bluetooth 2012 is it possible to update to the latest version firmware and still work normally?

[@YOYODiagnostic]

You can try

[@tisditisdi7919]

Hello how i can have this update . Great Job

[@DonMikson]

What if acctually I have installed on my computer old version 2016 and now I want to do upgrade ? At first I need to uninstall old version and then install newest version ? Or unistall old version is unnecessary ? Regards from Poland,

[@MrOlhund]

beautiful video where to download the program

[@edwinvandeoudeweetering2162]

Nice video! Thanks for the great educational video!

[@YOYODiagnostic]

Thanks 😊

[@Rostum25ful]

tres bonne explication Merci a vous

[@cosmicno685]

Thanks. Can i try it on a 2015 r3?

[@sweetanddad3669]

hello when i want to test my ds100e it put me test failed

[@gamespxgpx3779]

Hi can U tell me ive the version 2021.11 autocom and doesnt works with delphi ds150 1532. The 1622 version works,can u help me 👍

[@Elgaragesdclaypole]

Muchas gracias por compartir lo que sabes,me costo mucho instalar AUTOCOM ya que hay muchos videos de como hacerlo gratis pero,no comentaban de cambiar el formato de fecha en la pc,asta que logre instalarlo,pero no podia actualizar el firmware,asta que vi tu video,mil gracias,saludos desde Argentina,abrazos🤙

[@Aboothalif1]

How much cost of this Diagnostic tool and supporting cars ?

[@YOYODiagnostic]

I'm not a seller ! I don't sell products !

[@toniauma]

Jep jep loistava ohjelma👍

[@herbertmachado8859]

Muito bom o video bem explicado parabéns

[@fprossesor]

thank you, I installed program and it worked. but I updated firmware 1622 to 3201, the device can not estabilish connection with my car. when I roll back the firmware update 3201 to 1622 it connected.. How can I estabilish connection with 3201 firmware ?

[@YOYODiagnostic]

You have a single board or dual board

[@Daniele3251976]

Hy I have a dual board, and it dont work. Habe you a firmware for dual board, is this possible to change only? Or do i have to buy a single board? Thanks for answer? Thanks

[@YOYODiagnostic]

Hello, Single board is much better to have it.

[@azamraja4476]

Where can i get or download firmware 3201?

[@hendersonjp]

Hello sir , thank you ,very good . You say they can obtain your details throught this software , emails and bank accounts . Is there a way to block them . Thanks

[@YOYODiagnostic]

Hello. It is best to use this laptop only for diagnosis and not connect to the Internet. Unfortunately once we give permission to these shitty companies to our data you can not stop this , just do not connect your laptop to the Internet.

[@alexandersjoberg235]

Do the software still work?

[@Booki89]

Where can you get these clones ?

[@antoniod.1728]

Hello friend, how do I know if I have a single or dual board? I think I have a dual board (TCS V3). I have two boards, one with white relais and one without relais. I then only flash the 1662 firmware, right? I also have the 3200 firmware (not 3201). Do you happen to know if you can unlock the guided diagnostic? Thx

[@YOYODiagnostic]

Hello. That version of yours is dual board. The firmware must be 1622 to work properly. I do not advise you to update to 3201.

[@bazamoha2118]

Where do you get the download from? I need the firmware folder Thank you in advance

[@YOYODiagnostic]

[e-mail]

[@michalkolinek9405]

hello, how do you copy the code and paste it into the activation code? I can't do it somehow. thank you

[@piotreo3359]

Kombinacja klawisz ctrl+c lub v jedno kopiuje drugie wkleja

[@gbclify]

Hi Where can i get or download frimware.

[@RyneMunsterman]

i am a subscriber yoyo

[@Meandthecars]

There is no email on your page About channel. How then to write you?

[@pollpoll8100]

😁cold beer is flying :)

[@YOYODiagnostic]

👍

[@wilhelmvanderlinde757]

Hi friend. Where can I buy the original ds150e? Just send link to the store please..

[@YOYODiagnostic]

Hello. Search for Delphi.com and you will find

[@filipbalaz2053]

Hello Yoyo, do you think that this is possible with clone which is R2014? (150E clone i think is that which i have) thank you.

[@YOYODiagnostic]

Hello. More than likely it has 2 motherboards. You can use the software but with 1622 firmware.

[@filipbalaz2053]

@@YOYODiagnostic hello Yoyo, i will check when i will come back to home, how much motherboards do i have, i have clearly seen your video and, so there is a possiblity to work with newer software for newer version of cars than 2014, but FW needed to be 1622 and software able to be 2020? Or? I will check and write you an email, if possible, i can also pay you for this kind of help, cause this R2014 clone helped me with a lot of situations. Thank you. Filip

[@YOYODiagnostic]

@@filipbalaz2053 I don't help people for Money!!! If i take money from you not helping any more! If you are a subscriber, you are part of the community, you receive free help as much as my time allows and as much as I know how.

[@filipbalaz2053]

@@YOYODiagnostic Hello Yoyo, thank you. I already did subscribe and like and everything, dont be mad on me, i just wanted to help, i appreciate your time and helping hand. Thank you very much.

[@YOYODiagnostic]

@@filipbalaz2053 Thanks 👍 . I appreciate.

[@justus968]

Hey, I flashed new firmware on my Delphi clone dual board, now it doesn’t connect to Mercedes correctly (flashing green blue and beeping) any possibility to downgrade firmware? Where do I find data? It is firmware 1622, before it was 14xx. Would be really helpful, thank you!

[@YOYODiagnostic]

Hello, install an older version for example 2013 and do the same firmware update.

[@justus968]

@@YOYODiagnostic thank you!

[@YOYODiagnostic]

@@justus968 👍

[@Autosoftzdevelopment]

Excuse me brother i have autocom 2021.11 does ds150e what firmware i need to update brother ?

[@Elektrotechniker]

Which software will collect our personal data? That is freaking crazy if this is the case!

[@YOYODiagnostic]

All apps collect information, didn't you see when you install what permissions you give them? Look on this channel I have a video related to this problem. Microsoft is known as the biggest data collector, and so are others.

[@zykoncito]

Hello friend, I have been watching your channel since it is the only one that has information about this scanner and I have a question. Which model is better of these clones. The one with a single plate or the one with two plates and 21 relays?

[@YOYODiagnostic]

Hello. The one with a single motherboard. Look for quality A, there are 2-3 versions.

[@zykoncito]

@@YOYODiagnostic Hi Yoyo, Thanks for sharing these videos about Chinese Delphi clone. It helped me a lot to choose the equipment, which although it is quite basic, it works well for what it costs. Now, I wanted to ask you a question. Does the Autocom 2020 work well with the two board clones? From what I understood, you have to keep the firmware that comes with the clone with two boards and not update it. Ps: I did not receive the notification of your answer and I already ordered the clone of two plates lol

[@YOYODiagnostic]

@@zykoncito 👍

[@faikismajli6681]

Hi there thanx for the video very edukative. But i have a question. What do you mean with Dualboard vs Singel Board. How do i know what i have?. I have bought Delphi DS150 for 2 yers ago will that work or how to identify is it dual or singel pleas help

[@YOYODiagnostic]

Hello. you have to open it otherwise you can't see that. more than likely you have a dual board because the one with a single board is 2 times more expensive. not many people bought it before this new software 2020.

[@JohannesMadonsela-nz7nf]

hello. i want to know which email i use to send a folder with fileactivation please help

[@adonisnetworks]

Good video, thank you))

[@YOYODiagnostic]

Thanks 😊

[@ciava1]

@@YOYODiagnostic mate i cant find your email address. Lol. I looking this adress for 1 hour

[@YOYODiagnostic]

@@ciava1 [e-mail]

[@hacktisee808]

i have 100251 rev 1.0 and 2017r3 is it good version of delphi? and can i use this autocom 2020 with 2017?

[@YOYODiagnostic]

Hello. If you buy after writing sellers you will buy a new BMW at the price of Renault. It must be opened and seen as I explained if it has a single motherboard you can upgrade the firmware if it has 2 motherboards then you can use the new program but with the firmware with which it is 1622.

[@hacktisee808]

@@YOYODiagnostic i opened it and its dual blue board red nec, blue v3.0 bluetooth its writeon it "TCS " N1803 " i can find on it is this one good? Edit : i see my firmware is 1622 and 2017.rev3

[@YOYODiagnostic]

@@hacktisee808 Send me pictures to my email address

[@rudycroce3610]

Please send the link of the programs, thank you very much

[@YOYODiagnostic]

No free support anymore.

[@enverjames3527]

Goodmorning, I just want to know can the Delphi 2015 clone work with the 2022 software of delphi

[@christianhofer394]

Hello Yoyo, i have a Problem with my delphi Autocom. Its saying i need to do a new firmware update, when i wanna do this the download goes till 75% and then it stops and says in red : check conect to com port, power, com port number. I never used it sofar because of this problem. Can you help me? Thank you in advance

[@christianhofer394]

And i have the Firmware 3201

[@YOYODiagnostic]

Hello, Send me a Email to [e-mail]

[@ruisimoes3638]

Can we use this software to activate a function? Say, paddle steering wheel gear shifter on a smart?

[@YOYODiagnostic]

I will make a video. 👍

[@josea.s.v.7790]

Very good job.

[@YOYODiagnostic]

👍

[@origishogun6175]

💪🏻💪🏻💪🏻🍀

[@valonibraimi2846]

I have the delphi 2016 hardware but my pc is broken and i dont have software now how can i get software

[@solomonadrian11]

Hey. I have buyed and installed a 2020.23 delphi gold. At test is ok ,download is ok. But when i try to conect(play) it says AN INTERNAL ERROR HAS OCCURRED. TRY AGAIN. Can you please help me ?

[@YOYODiagnostic]

[e-mail]

[@MsKazic]

hello how do i know if it has a single or dual board? thanks

[@YOYODiagnostic]

Hello, you must to open the scanner.

[@danek1173]

i've ordered dual board with red nec relays will it be good for opel?

[@YOYODiagnostic]

why didn't you buy with only one motherboard?

[@danek1173]

@@YOYODiagnostic In my country, the single board version is much more expensive and i need it only for my opel and vw passat B5

[@raulm.g.6163]

Hola! Podrias pasarme los archivos para actualizar el frimware? Gracias

[@faikismajli6681]

Do i have to update the firmware? I testet my firmware and it says ok.

[@YOYODiagnostic]

in the latest software the firmware version is identical to the one from 2017. if you have a dual board, leave it as it is. if you have a single board to operate at full capacity you need to update the firmware.

[@claudiorodrigues8445]

Good morning, where can I download the firmware? The current version is 1532

[@YOYODiagnostic]

Hello. The new Software has version 1622 integrated and it's ok if you have a dual motherboard. If you have only one motherboard then you need 3201 for better performance.

[@foxyfoxgta6326]

Where can I get the files from