Great video. I could not get it to work until I realized you were starting with the receiver OFF. I kept trying to do it with the receiver already on.
@jgbelmont3 жыл бұрын
FROM STANDBY MODE!!!!!!! actually not powered on already. Thank you.
@AA-us5loАй бұрын
Worked perfectly thanks!!!
@BullsDeepHook3 жыл бұрын
Thank you. This tip helped me solve my sound problem. All I needed was a software update apparently, and this method helped me get my AVR working within 5 minutes. 👍🏻👍🏻
@HowToDoitright3 жыл бұрын
Glad it helped. Please like and subscribe as it helps my channel supporting charity :)
@JamesConway3 жыл бұрын
Running firmware update via USB thumb drive was not working, but doing it your way did. Thank you!
@HowToDoitright3 жыл бұрын
Glad it helped
@tdav2252 жыл бұрын
Thanks. Just updated my unit!
@MrDtbrownlee3 жыл бұрын
Thank You!!!!! I have the exact model!!!! Worked great. Very simple and easy instructions
@Rarecommentry3 жыл бұрын
Video and kid both awesome! Super thanks
@SickTheory2 жыл бұрын
Sweet! Worked on mine. Thanks
@oscarmacias53709 ай бұрын
Thanks for the video, it help me out alot.
@HowToDoitright9 ай бұрын
Glad it helped
@bazman3572 жыл бұрын
This was a fantastic help to me thank you. I just bought a Sony A90J 65 inch sadly my amp is the RX 581 so I don't think Dolby vision will work. I'm just going to plug my UHD blu ray player & my Apple Box directly into HDMI 3 & 4 Dolby vision is,detected then luckily the sound still works on my 7.1 Dolby speakers. TV was €2900 in sale so a new,amp will have to wait until next year.
@corrbox24 жыл бұрын
Thank you for your help!
@stevesewell7754 жыл бұрын
Thank you. I just bought an rx-v485 and was having issues with set up and it recognizing my sub. Hope the update will help. Thanks again.
@HowToDoitright4 жыл бұрын
Glad it helped
@rezamahtabi4822 жыл бұрын
Thanks a lot for good video.
@rockfangd3 жыл бұрын
Thank you very much. We have had our Yamaha (similar to the one in this video) for about 10 years. The HDMIARC stopped working properly (displaying volume, menu, etc...). I looked at the back of the unit and saw there was no ethernet plugged in. I ran the update and voila it works nicely again. Thought I was going to have to repair the unit. I think there is solder joints starting to fail though as when it gets cold enough it has to warm up to function on the hdmi output. Will have to see if the update resolved that too but I highly doubt it
@marcbuter Жыл бұрын
Thank you
@laurolteanu75764 жыл бұрын
Thank you man!
@HowToDoitright4 жыл бұрын
Happy to help!
@tomandemmy21 Жыл бұрын
FYI if zone 2 is on you cant go to advanced mode.
@celebratinglivestogether2 жыл бұрын
Hi I've got a rx2040. It says Ive got an update on the on screen display. I followed your method(as well as the on screen display method) and got to he verifying part but then I get 'device error' any reason why it gives an error
@HowToDoitright2 жыл бұрын
You may have a router firewall issue. Make sure you are not on WiFi and use an eithernet cable and turn off firewall
@2HAMMERS13 жыл бұрын
I purchased the Yamaha RX-A1070 This update works with this model as shown here. A few years back and you have this then you will agree it is a power house of a receiver But looks like it will be up for sale and I just knwo I am going to lose 90% of what I paid for it. UNLESS........... Will this firmware Update give me e-ARC Ohhhhhhhhhhh please tell me YESSSSSSSSSSSSSSSSS and how to access it. Your video woked as shown in your video THANK YOU I am a dad also, your son is a cutie, { haha I am not naughty so cute } Regards from Montreal, Quebec
@HowToDoitright3 жыл бұрын
I really wish I would know but I don’t have that model. You may want to check on their site and see what the firmware unlocks
@2HAMMERS13 жыл бұрын
@@HowToDoitright Thanks for your speedy reply!!!! Do you now have access to eARC on your Yamaha ? Hope it does for both of us, it will save us thousands of Dollars.
@2HAMMERS13 жыл бұрын
@@HowToDoitright Just to follow up I had word today from Yamaha I was informed that eARC in ' NOT ' available after the firmware update. " RATS " So my sRX-A1070 is up for sale Which bring me to ask, Have we all been fooled to think we were getting true Dolby Digital with our ARC high-end systems?
@SingaporeRealEstateHiFi3 жыл бұрын
Thanks for a very clearly explained video. If I may ask a question about the eARC. So does it means after updated my receiver to eARC, my Tv (has EARC) can send uncompressed Dolby Atmos to the receiver?
@HowToDoitright3 жыл бұрын
I am not sure
@donaldjames44372 жыл бұрын
@@HowToDoitright Will pass through TV audio yet needs a decoder for ATMOS .
@vathsalatheva85172 жыл бұрын
Thanks for the video, I have the rx- v465 model. How do I connect this to network? Thanks
@gordonlaroussini1735 Жыл бұрын
DO you have any insight as to how to find the production date on the Rx-a770?
@armaanawadhi9553 жыл бұрын
Bro plz help me I have an issue about ARC connecting
@vijayakumar_973 жыл бұрын
Bro please tell I have yamaha home theatre 1840 have any update and my system support WiFi I just buy it today only and I want how speaker confiuration setting setup speaker level dB you have any video I'm form india please please please reply to me I have more questions
@HowToDoitright3 жыл бұрын
No idea. Check with Yamaha. I don’t have that model
@krishperumal79044 жыл бұрын
Hi I bought a Yamaha 485 but there is no sound at all from the receiver. Please advise
@HowToDoitright4 жыл бұрын
First try resetting to factory defaults and then try it just with an analog signal out to speakers to see if it works.
@Digmen1 Жыл бұрын
You did not tell us how to connect the Reviever to the internet Do you just have to plug in an ethernet cable ?
@HowToDoitright Жыл бұрын
Just plug in the Ethernet cable or connect to Wi-Fi
@Digmen1 Жыл бұрын
Hello Very handy I have a Yamaha RXV385 - its 1 week old How do you find out what is in the firmware upgrades
@HowToDoitright Жыл бұрын
Connect either net behind or connect to Wi-Fi if you have that option
@baneesh292 жыл бұрын
i dont find rx-v377 firmware whare can i get this firmware
@vonzuriel434111 ай бұрын
So…on todays date there’s no update… Receiver saint “NOT FOUND” Is it maybe that it is uppdated already? Thanks for your info.
@HowToDoitright11 ай бұрын
Try hard wire instead of wireless
@vonzuriel434111 ай бұрын
@@HowToDoitright Thank you!
@ginaoneil3395 Жыл бұрын
Make sure you download the update to your computer, then unzip (extract) the file. Then save the .bin file to the root folder on the USB drive to do the update. Otherwise, it won't work.
@gdevelek3 жыл бұрын
I wonder if a new wersion is out....
@dwj3005 Жыл бұрын
Will this work for Yamaha rx-v385
@foordya8 ай бұрын
It was easier to update from remote
@josephsawatsky Жыл бұрын
I don't think it works on mine
@leoworld19914 жыл бұрын
Net connection in the amp pls tell me
@jrbrawlersgaming18162 жыл бұрын
Does this work for the v385?
@markrobby7136 Жыл бұрын
Thanks, but i couldn't find any firmware anywhere for my Yamaha RX V-373. It has Technical problem that need firmware to fix it
@HowToDoitright Жыл бұрын
Connect it directly to internet and then let it download
@markrobby7136 Жыл бұрын
@@HowToDoitright the v-373 has no internet port. No wifi and no Bluetooth
@HowToDoitright Жыл бұрын
Ahhh. I suggest call them and they will guide you
@montythebrave89863 жыл бұрын
How do you update the firmware on HTR-2866 as there is no usb or ethernet connection.
@HowToDoitright3 жыл бұрын
Then there is no update for those most likely.
@dudumoc4 жыл бұрын
Can I put the RX-V383 firmware on the RX-V377?
@HowToDoitright4 жыл бұрын
Only if you want to try it out as experiment. I would not even attempt. It’s like trying to install android on Apple 😬
@PCman503 жыл бұрын
Was just given a Yamaha RX-V485 that says "Internal Error" when turned on. Supposedly a common problem if unplugged for a long time and not used. I've heard I can re-image it via the USB port and it will fix it. Can someone verify this? Thanks
@HowToDoitright3 жыл бұрын
Good to know. Let us know if you try it and it works
@rennivalkeinen1212 жыл бұрын
I have too old receiver RX-V465 😐
@HowToDoitright2 жыл бұрын
Still not too old
@willysolon28713 жыл бұрын
how to update no stanby red ligth.
@HowToDoitright3 жыл бұрын
That I don’t know
@OlegProphetic19812 жыл бұрын
Спасибо, в России тебя увидели!)
@alicjafal35623 жыл бұрын
Hmmm error 000080? Help😩
@newnemezis3 жыл бұрын
My reciever stucks at S1-31: 100% any sugestions?
@HowToDoitright3 жыл бұрын
Hopefully you were not updating it wirelessly. Try restarting your router
@newnemezis3 жыл бұрын
@@HowToDoitright thanks but the stuck at s1-31 it's with USB update if I try with network update stuck on S1-19, the same but at 19%.
@HowToDoitright3 жыл бұрын
Something seems weird. I suggest try a different router. Maybe take it to a friends house and then try it if you have a different router. I vaguely remember something similar happened and it was a router issue.
@olddanb13 жыл бұрын
What on earth did you do with your right hand? Itwas out of shot.
@HowToDoitright3 жыл бұрын
Holding remote remote control and the camera 😁
@mikehlee692 жыл бұрын
What if network is not available
@mogmaximus Жыл бұрын
inspect the network cable to comes into your house for mice damage
@n1kkri2 жыл бұрын
what happens if it comes back and states NOT FOUND
@HowToDoitright2 жыл бұрын
Meaning no updates available
@n1kkri2 жыл бұрын
@@HowToDoitright I have version 1.08 firmware. latest is 2.86. doing it with network didn't work. Doing it with USB right now will see what happens
@HowToDoitright2 жыл бұрын
@@n1kkri it’s possible your router is blocking it. Some times security settings needs to be disabled or firewall blocks it
@n1kkri2 жыл бұрын
I did a USB update to firmware 2.86 successfully. Now I can connect MusicCast to the receiver as well as connect my bluetooth headphones. In the receiver menu I now have a SEND (bluetooth transmitter) working and the bluetooth headphones sound good. I can't figure out how to adjust the bluetooth volume?? any help would be appreciated. thanks
@n1kkri2 жыл бұрын
I figured the volume out. I thought maybe it could be adjusted via the receives remote but it can't but can be adjusted via the headset
@naimgoorah4064 жыл бұрын
Hi I try to update my s600 it’s device error what’s that mean please
@HowToDoitright4 жыл бұрын
Not sure what error you getting
@dhanu3474 жыл бұрын
i got the same error , just download it into a USB and do a update much more easier , make sure that you unzip the file to the USB drive
@kennethfriedberg23584 жыл бұрын
@@dhanu347 Use the right internet cable not a phone line thats what i did