First Engine Out on My Moster 185

[@jerrydelyea5820]

Nicely executed landing Josh. Sorry for your engine trouble. Looked like a beautiful day ✌️🇨🇦

[@ParamotorSteve]

Well done! It’s nice when your emergency bailout is big and forgiving!

[@PPGShane]

You did better than my first motor out lol. I went right into panic mode then restarted a few seconds after. Thankfully it restarted and I landed back at the LZ. Good job.

[@joshperryppg]

I really missed my e-start on my nitro at that point... this was my vittorazi...

[@Maxrider2009]

Well done, my boy!!! Glad you're all good!

[@dnorthup65]

Nice job. Good assumption about being the first of ??. I've had at least 5 outs in the last 6 years... 1 on a moster -blown piston. 2 blown pistons on a Polini 202. 1 was an electrical short on the Polini due to wear in the leads from the coil - wore through in a spot where they exit part of the case and were protected from the case by a rubber grommet - the wires rubbed against each other though down to the bare wires - design flaw. The Polini had < 80 hours on it. I no longer fly a Polini. Last one was fuel starvation in the float bowl carb on my new Sky 150 during some wing overs. I don't do wing overs at idle any more. (Lesson learned.) Expect more outs and you'll always land safely. Way to stay on your toes, come up with a plan quickly and execute it with no chance for a go-around. Great job. -Blue Skies!!

[@EvilKen01]

It sounded like the motor was being starved of fuel possibly

[@shawny51]

What's the name of the app you're using in the video

[@joshperryppg]

Gaggle flight recorder on my phone, and telemetry overlay desktop for the HUD.

[@fundacaoanimalia2041]

Bitchin'Betty, we call it...

[@rule1dontgosplat]

Nicely done. I had a motor out my fifth flight. The ill switch wire rubbed into the frame and killed the motor. I was at 3400 feet AGL though so I had a LOT of time to figure it out. Pissed me off too, I was headed for 6000 feet and never made it.

[@jammer4578]

Turn low-speed needle 1/16 to 1/8 counterclockwise.

[@jdipierro]

Nicely handled! How many hours on the engine?

[@joshperryppg]

That was like 20 hours.

[@PPGKyle]

Dang, that thing did NOT sound healthy when idling. Nicely handled bro!

[@turkeyphant]

What did you use for the HUD?

[@joshperryppg]

This is the GPS data from the gopro overlaid on the video using "telemetry overlay" desktop app.

[@turkeyphant]

@@joshperryppg Thanks. That's the expensive paid app, right?

[@joshperryppg]

@@turkeyphant Correct, its like 150.

[@turkeyphant]

@@joshperryppg yikes. It's pretty but I can't see that ever being worth it

[@semperflyppg]

How did u get the stats on screen new insta x4 or x3

[@joshperryppg]

its from the gopro GPS data and a windows app called, "Telemetry overlay".

[@WolfyGamerPro]

What's the device you're using that informs you about the altitude and wind direction before touchdown?

[@neosugus]

Well done!!!! :) What electronics do you have installed that tell you the hight and speed by audio???? I would love that in real time to help my landings be more accurate

[@nataysalim5789]

Great stuff man! What is the app you are using to display this HUD telemetries?

[@joshperryppg]

Hey, thanks for watching! I'm using software called, "Go-Pro Telemetry Overlay" you can find it here. goprotelemetryextractor.com/telemetry-overlay-gps-video-sensors You can save $30 with code: SOCIALSHARE

[@nataysalim5789]

@@joshperryppg Thanks! Much appreciated!

[@vikp8817]

What App is that showing your flight details? Looks good so I would like to try it... please let me know

[@joshperryppg]

Hey, thanks for watching! I'm using software called, "Go-Pro Telemetry Overlay" you can find it here. goprotelemetryextractor.com/telemetry-overlay-gps-video-sensors You can save $30 with code: SOCIALSHARE

[@shanewyman9419]

Plug look good? Sounded like a lean surge while idling

[@joshperryppg]

Ya, it was textbook brown.

[@artisticsob]

What app are you using to get all that info on the screen? Good job having your out picked and landing safely to fly another day. Cheers.

[@joshperryppg]

Hey, thanks for watching! I'm using software called, "Go-Pro Telemetry Overlay" you can find it here. goprotelemetryextractor.com/telemetry-overlay-gps-video-sensors You can save $30 with code: SOCIALSHARE

[@freefall80]

Nicely done 👍🏻

[@dswoop9477]

Does this telemetry overlay dataa just shnc that all with gaggle or are you doing alot extra?

[@joshperryppg]

I pull the GPX file from my go-pro, and then telemetry overlay uses that file and then stitches together the gopro videos with the data.

[@flierbill]

Glad you had an out !

[@johannesneu7176]

I'd say it's slightly lean

[@JeffKlavir]

Josh, what hardware/software do you use for the flight telemetry and displaying it on the video? I dig that!

[@joshperryppg]

This is the GPS data from the gopro overlaid on the video using "telemetry overlay" desktop app.

[@dnorthup65]

wait, is this the first one in 4 years of flying????? Now I'm jealous. Hope it's 4+ before the next one.

[@joshperryppg]

Haha, 5 years this year. Technically its my 2nd engine failure while flying. The first one, my Nitro 200 blew up around 220 hours. I was supposed to change the piston at 200... I didn't... So I rebuilt that, and then recently got the moster. I had this engine out on the moster at 20 hours. I never had one on my nitro except when it blew up lol.

[@chrishibner516]

@@joshperryppg I was on that flight when you blew up the Nitro. When I saw this pop up in my feed I was wondering what happened to that engine.

[@wowguy3562]

A guy I saw had a similar issue, long story short, he had swapped a gas tank and apparently some silicone plugged his fuel filter

[@rmbru2k]

It happens. Hasn't happened to me yet. Keyword, yet.

[@mrwest5552]

no need for coffee then.

[@Les__Mack]

Yeah but it won't be your last! lolol Ask me how I know.