FIRST MOD | NIGHT SIGHTS FOR THE 3.6" M&P 2.0

[@_Mailman]

Looks like you have a TLR7 on there. Have you tried or could you try any other lights on this weapon? Information out there on what will and will not fit, as well as just seeing how they look, how far they sit out past the end of gun is really tough to find anywhere right now. TLR6? TLR3 and 4? OP Light Mini Valkyrie? XC1? APLc? Also where are you getting your holsters from to carry with the TLR7. Holster options out there seem minimal right now for this 3.6. I own one and am really trying to research all this.

[@ksmoove78]

Hey me too. I just purchased mine and is curious what fits and how it looks. I like the flush look. Have you found any info

[@myfd242]

Looking forward to more videos on the 3.6 mp 2.0

[@ProvectusGroup]

myfd242 thank you there will be more

[@culturetrash3191]

Me as well. Mine is currently on its way and I can't wait to shoot it.

[@culturetrash3191]

Same here! Just picked mine up last week and I am loving it.

[@won01419]

I just ordered mine and I can't wait to see it in person.

[@albertsilva4057]

Great vid, suggestions for weapon light for the 3.6? Thank you.

[@ozysjahputera7669]

Pretty good shooting there. I have an M&P 2.0 with 4" barrel. Thinking about getting a 3.6" model to make aiwb carry easier. Should I?

[@ashtonolivares395]

Curious about that TLR7...Did that fit right out the box?

[@kylewood8327]

Great video (and new subscriber too) on the M&P! This was the first thing I did to, except I installed the TFX’s and not the Pros. I bought my 2.0, 3.6 in. used (but looked like it never been shot.) An Apex trigger (no kit) had all ready been installed too. So it’s definitely in my EDC rotation along with my CZ 75D.

[@thyrichie7329]

I watched 5mins of this video and I bought a set 😁

[@johnp1839]

Do you recommend a sight pusher or does a hammer with soft tip punch work for sight installation?

[@marcbarrett3998]

For the S&W M&P 2.0 3.6" handgun, what is the truglo tfx pro product number that fits this handgun? Is this one correct, TG-TG13MP1PC? Thanks!

[@linzmcgeorge]

To swap the sites, you will need a 1/2 inch brass drift that you grind the tip to resemble a "D" shape. Wrap in painter's tape. A good sturdy vice with "soft jaws" or something that will prevent finish damage to the slide. You will need a Dremmel tool with some extra cutoff wheels to cut almost all the way through the stock rear sight, straight across the now empty set screw hole. You will booger up the finish taking that tight bastard off with a drift alone. Now, a little gun oil helps you tap on your new rear sights without too much issue. Then, lock down the set screw. The front sight is a lot easier. Just use that "D" shaped, brass drift to knock off the stock front sight. Then a small amount of gun oil on the bottom and dove tail sides will help you tap the new tritium sights in the center.

[@anthonyvaladez6097]

I'm a Leo from Arizona and I want to say your video was very good and I really enjoyed watching it. I just bought 2.0 chambered in .40 cal a few days ago. I love the 2.0 as well and thinking of getting the compact frame.

[@deeboo1122]

Great Gun, good choice with the sights...Is the Full Size M&P and the compact your choice for a SHTF situation..(As far as a primary pistol and its backup).. I have a G17 and G26 combo as my SHTF set up...The 2.0 line is def a great gun S&W finally closed the gap between the M&P line and Glock line....I would love to own one and well as a bunch of other guns, I just cant justify buying a new set up just yet...Keep up the good work, Be safe and God Bless...And def enjoy ur new gun

[@johnnyv.223]

Excellent video! I'm looking for some quality sights like these for a friend, but I couldn't find any this good. Thank you for this!

[@ddakota22592]

What light are you running on that? Looking between this and the 4" version but want to make sure a light is flush with the 3.6

[@user-pz5ju7mw3k]

Dakota Dao ever figure that out? I’m wondering the same

[@user-pz5ju7mw3k]

I took a better look at the thumb nail picture it looks like a tlr-7

[@tonedatruth]

sameeee

[@shadmanwahied4443]

i'm in the SAME exact shoes as you brother, if you find out can you let me know?

[@boogie816_rtcr2]

Olight Pl- Mini 2 valkyrie sets flat on the 3.6 inch barrel.

[@mannycruz216]

What light are you running on that pistol?

[@bigdee791]

Great video! Any holster suggestions???? I'm having trouble finding one for the 3.6" . Most companies say the 4.0" will NOT work with the 3.6"!!

[@bc58]

Concealmentexpress.com

[@tylerm7403]

Vedder

[@nativepapi6818]

Great video brother, got my Smith &wesson m&p 2.o compact 3.6 last week shoots great. Getting my big dot night sights next week.

[@superstatus2640]

Did u like the new sights? If so, can u post a link to them?

[@killersushi99]

Just bought this gun and damn. Mine was shooting WAY left out of the box. I may need to adjust my sights. I changed my grip as much as I can but it still was way left. I'm surely following you now my man!! Great tips on the 2.0!

[@gummybear41283]

I was wondering what lights would fit on the 3.6, what light was that? I'm not sure if I should get the 3.6 or the regular compact because I want to put a surefire x300 and xc1 on it and don't think it will work with the 3.6

[@OfficiallyTonyGianni]

I just purchased this gun today... I really wanted the optic ready version but couldn't locate anyone with inventory. thanks for this video.. im trying to enhance what seems to be a great gun already.

[@jasonsmith2490]

Had the trijicon bright and tough sights installed and the rears literally fell off at the range, torqued down to 18 inch lbs with locktite on the bottom of the sight and set screw hopefully I’m good😂

[@sakurabahfan]

Do you know if this also fits the 1.0?

[@stevenstarr8326]

What would you recommend for a light/laser attachment for this pistol? And also a good holster that allows for the light/laser

[@Rhyme905]

2 years ago u posted this did u find any bro??

[@stevenstarr8326]

@@Rhyme905 😂 I actually ended up buying a different pistol so I didn’t continue to search.

[@Rhyme905]

@@stevenstarr8326 nice lol im researching this and saw ur comment thought id ask so what u buy man lol

[@jimkunkle2669]

I like your presentation style. Not to wordy, but lots of info. That earned a subscription.

[@bradleypiszkiewicz8442]

Which 1913 key are you using with the tlr 7? My light was falling off at the range with my 3.6

[@RR-yi8zr]

Do you prefer the 2.0 vs the G19

[@adelmahmoud1295]

What’s a good flash light that doesn’t cost an arm and a leg for that m&p?

[@TheLoneRanger745]

Wow great group ing. Thanks I love those sight's !

[@deaneng8540]

Any reason you got th 3.6" instead of the 4"? That little bit I think really doesn't make any difference unless you appendix carry?

[@sbcns]

any light recommendation for this gun? thanks

[@108pel]

Any ideas for good holster?

[@1970banjoman]

Went to my lgs and looked into ordering these. He had the night sights version in stock but, my older eyes need the fiber optics I believe. Thanks for the vid.

[@bjohnson515]

Arent these fiber optic?

[@bc58]

What light do you have there ? Is that a tlr 7 you have mounted ? Please post. There are a few people here that have the gun and would like to know including myself. Thank you

[@shadmanwahied4443]

yes, i've verified it is the tlr-7!

[@OfficiallyTonyGianni]

he doesn't seem to answer any comments

[@waldoperez3005]

I thought you were going to use some kind of a rest to adjust the sights but obviously you don’t need it sir. You have very good trigger control.

[@markd7762]

Nice shooting! Been thinking about these sights. It's either these or the Ameriglo i dot pro

[@24sevvin]

Another great presentation. Short, sweet and informative. With hello kitty ear protection! Love those sights. My 4in came with the factory night sights that seem like they will hold me over for a while. Tell us more about the elite pistol. I was going to pick up a 3.6in but think I’m going to wait to hear more.

[@ProvectusGroup]

A Tho thank you so much I’m glad these vids are helping folks. The Elite by Provectus Group Pistol is going to be based on the 2.0 compact, 3.6, full size and 5”. It will be a complete package. You can either send your gun in or purchase it complete. The goal is to have a carry gun that you can trust that has enhancements done that increase consistency and lethality, all while not breaking the bank.

[@USMC_LAterZ]

Are civilians allowed to purchase this model in LE? LE model comes with the night sights. M2.0 3.6 LE

[@bigchill87mw]

What kind of Light is on Your Gun?

[@remowilliams3340]

Good video I like those sights my plans for my M&P is a blacklist fluted barrel and an apex flat trigger and I think I'd like to try those sight out brother thanks for the insight 🇺🇸🤘🏻👉🏻

[@damirjalali]

Thx for the Video I am 60yrs. I dont like the my site on M& P M2.0 9mm, 4.25" I wear prescription glasses. Can u help me please. I also hate my trigger which is extremely hard. Need help.

[@omg.2tsx_alex593]

Apex trigger

[@bigcountry9135]

Can you put those same sights on the M&P shield 380 2.0?

[@jmorris1594]

Hey bro, Love the review but...why would I put night sights on? If i can't see it, I ain't shootin at it.Instead I put on HIVIZ...J

[@1pecwonder]

I mean, sometimes you can see your target, but not the little white dots. Low light scenarios aren't the best for acquiring an accurate sight picture, especially when you can't see your sights well. By the way, I am by no means saying that you should shoot something that goes bump in the night without knowing who/what it is first that is incredibly foolish and dangerous. I am assuming that identifying a threat has already been done because the cardinal rules of gun safety are clear when it comes to only pointing your gun at something you are willing to shoot/destroy. You are only acquiring a sight picture when you are aiming your gun. So I am assuming a threat has already been identified. So in the case of a low light deadly encounter, night sights will help you acquire your sight picture much faster than factory sights.

[@walterhwhite109]

Nice pistol and nice shooting. Love my 3.6. Thanks!

[@raalvarez9241]

Nice video man will be changing out the sights when I got the 💰. My M&P 2.0 3.6” just got delivered to my ffl can’t wait to get home and try it !

[@saber0089]

How much did you pay for it? Just curious what they sold sold for 5 months ago. I'm in the market for one now but not sure if ~$570 is fair price.

[@raalvarez9241]

@@saber0089 seems fair in today’s market . I got mine back in June for $525 at Sportsman’s guide. The grip is amazing isn’t it ?

[@bella1999ful]

How did you find the accuracy on the pistol. I feel mine is shooting low.

[@kendallfleming5858]

1. When you say shooting low, is it your grip? 2. You may have sights that need to be 0'd a bit. 3. Are you breaking your wrist?

[@loyancharlrs9534]

Get an apex trigger even if it’s the not complete flat face one it’s night an day difference great vid

[@TheJRich24]

I enjoy my 3.6” m2.0. Need to work with it a bit more so I can be as accurate with it as my m11a1. And the tlr7 looks sharp on it as well.

[@TofuProductionCinema]

Same here, I am contemplating night sights and what kind, this one seems to do it for me. I have mine paired with the O-Light PL Mini 2.

[@TheJRich24]

HKMediaChicago the O Light looks great. Nice choice in lights.

[@TofuProductionCinema]

@@TheJRich24 Thank you, sir. I just received the OLight Odin for my AR-15, amazing as well.

[@ProvectusGroup]

Yes it is. I’m loving it!!

[@MingHeardYou]

Awesome video. Exactly what I was looking for.

[@jarrettupton57]

What light did you have on there?

[@leroyatleroys]

So I just bought my M&P 2.0. I love tritium sights. I have them on one of my pistols and even my AR-15. However, why do people often insist on replacing the stock sights on the M&P 2.0? I understand that glow sights can help in low light. But in my experiences, when you have to draw, you often need to make sure you have enough light to see what you are shooting at anyway. That light is usually enough for you to identify your regular sights. In a defense circumstance, many times, you don't really have time to focus on aiming exactly. Usually it is very much pointing and shooting. If it is a home invasion and you have a mounted light, that is still enough to provide enough background light to acquire your sights. I just can't help but wonder, are glow sights really the first modification you should focus on? It's not like they have any special controls to be more accurate. You can align the stock ones the same as any other sight. The dots seem bright and well made on their own. If anything, I would replace the trigger first. Though the stock trigger is pretty good, I am not a fan of the hinged trigger and definitely prefer a flatter surface for that type of pistol. I also feel like the enclosed safety tab is theoretically safer than the bottom hinge safety. Anyway, I'm not knocking night sights. I just don't believe that they should be the first thing you should add to your pistol, if at all.

[@truthseeker1833]

I have a range in my back yard and just got back in from a night shoot. Although I have a mounted light on my 4" compact 2.0 it would be a lot better to have these night sights over stock where it takes my eyes to long to pick up. PS the stock triggers are perfect for me although I do like the new flat face trigger my sheild plus has over the curved hinged of my shield 2.0

[@Lunchbox87km]

Great video. I'm ill be getting an m&p 2.0 4inch barrel one I sell my XDM

[@nativepapi6818]

Hay brother, great video. I picked up a 2.0 compact 3.6 have a hard time finding a light to fit on it , do you know of any.

[@Lee_Shengshun]

Mike Oldenburg olight mini

[@ProvectusGroup]

Mike Oldenburg I use the Streamlight TLR-7 on my 3.6

[@nativepapi6818]

@@ProvectusGroup thanks, I'll check it out. Thanks for your help. Take care , be safe.

[@Jp-ye6om]

Joseph Escarzaga O-light does not fit flush on the 3.6 inch , to my knowledge TLR 7 and APLc will fit

[@FrankieKato149]

Have you tried Trijicon HD XR?

[@cardshazard6206]

Have the same sights on my shield. Best I’ve found for the price in my opinion.

[@choicefamilyfirearms]

My trl 7 keeps hoping off my m&p sub compact

[@3htacticalstore]

Hey bro nice video, great choice of sights! 👍

[@ProvectusGroup]

3HTACTICAL STORE thank you guys. I love these sights!

[@milehighed52801]

Good video. I have a couple of the M2.0's. Might be wanting this one, too. It falls in between my M2.0 Compact and my Shield. Nice shooting, brother! I have those sights on my CZ 75B. They're excellent sights. Great outdoors in bright light, but the Tritiums could be brighter in low light. All in all, good stuff! Thanks for the video, Ken! 😎👍🏻🇺🇸💥

[@j.rob.5943]

Love my 2.0. You’ll never see the sights in any self defense situation. A light (for a home defense pistol) is a better upgrade, IMO. Nice production!

[@ryusekai]

J. Rob. Ya gonna have to agree.

[@carl-ok9gn]

you will see the sights if you have trained enough. ask any of the best gunfighters in history. they all focus at their front sight during shootings.

[@plaftbl51]

Do you have a rough price for the ones you installed.

[@supermoon1430]

51$ as of now on Amazon

[@OfficiallyTonyGianni]

@@supermoon1430 $112 on amazon right now

[@supermoon1430]

@@OfficiallyTonyGianni damn!! That sucks I’m sure the price will come back down in time

[@rodneydavis8454]

I like the m&p no problem with it but I am g19 or g29 sf. I have 15 glocks yeah ok I am a Glock guy but I do the the m&p great gun.

[@ryusekai]

Generally if you cant see your sights then you cant get PID on a target and when you have a light you dont need night sights.

[@j.rob.5943]

ryusekai agreed. Night sights are a gimmick, IMO, for a defensive firearm

[@cameronhall4643]

With the light in did you make your own holster or is there one you can recommend?

[@ProvectusGroup]

Cameron Hall I’d recommend a holster from TXC Holsters. Use code PROVECTUS10

[@cameronhall4643]

Provectus Group I’ve looked at them which one is it that works with the light attached?

[@cameronhall4643]

Provectus Group I don’t see one that say M&P 2.0 9mm with TLR

[@ProvectusGroup]

Under build your own X1 Ally it says M&P 2.0/TLR-7 light.

[@cameronhall4643]

Provectus Group greatly appreciated. I turn 21 on the 25th of this month and am purchasing a 2.0 3.6 as my first CC gun and want to go ahead and get a holster that will be compatible with a light and I am a stream light fan through and through

[@johna1186]

Just gonna put a 1x irnv on top of it. Id say that’d get the job done for night sights

[@almaadams3631]

First upgrade should be 40 SMITH AND WESSON. ( 135/155grn. Nosler or Hornady XTP)

[@troygoodyear9029]

Great vid sir!

[@truupsmith9253]

Can anyone point me towards a iwb holster that accommodates a tlr7? Any info is greatly appreciated.

[@mjc3502]

First mod should be a apex flat face trigger. Made the biggest difference.

[@venomgt7299]

Talon grips followed by night sights topped off with a apex trigger.Done

[@realcowboyrealcowboy7125]

Outstanding video, very informative

[@ProvectusGroup]

Realcowboy Realcowboy thank you sir! We appreciate the support!

[@vinnypeterson8180]

Does anyone know where to find a good IWB holsters specific to the 3.6?

[@1970banjoman]

Vinny Peterson Priority 1 holsters makes several for the 3.6"

[@tylerm7403]

Vedder Holsters

[@ksmoove78]

Just ordered mine from concealment express. Harry’s holsters is another.

[@sl5946]

I love this gun but I find the mag a little difficult to load especially compared to the Glock

[@OfficiallyTonyGianni]

I thought it was just me.. I was like is thing thing broke.. needs some oil or what!

[@Travis_125]

New subscriber! Great job!

[@benjamincooper8531]

Have you ever been told that you have a great voice for radio?

[@tfcdesigns]

Very good video!

[@ProvectusGroup]

wardrobearchitect thank you baby!!

[@alabamayankee7217]

FYI - other 3.6 video was removed by you tube.

[@Tiger99dawg]

Nice video

[@KevinNiven]

Good video thx!

[@ProvectusGroup]

Kevin Niven thank you bro. We appreciate the support

[@charlesmarshall2697]

My first mod to mine is NOT TO HAVE A WEAPON LIGHT STICKING OUT BEYOND THE BARREL. There is already a Streamlight TLR6 that fits this pistol. Go out in total darkness and you will understand that any tritium sight is useless. They are only good for seeing that pistol on your nightstand!

[@_Mailman]

I have been looking but can’t seem to confirm a TLR6 option that for sure works or any photos of it on the gun. You have a link by chance?

[@ddiegorosa]

Everything you said is of opinion and not a good opinion either. Makes no sense and I can say nah to every statement you said besides the tlr-6 (which yes it can fit if you get the rail option) but youre so sure even though all that you've said is regurgitated BS from KZbin.

[@kieferskywalker7242]

👍

[@2weekendtravelers]

What’s up Ken!!! This is G from the Wilmington, NC detail! Didn’t know you had a channel. I’ve subscribed! We have a travel channel. Check us out! If you need anything around this way, holler at me

[@Feelrightathome]

Ima go poor with a new arrel new trigger and sights all over 100$ im going to e broke

[@ejh66]

Good vid. I think you should just give me your Glocks. 😀

[@ProvectusGroup]

Eric Hertel haha thank you bro. We may work something out lol

[@ejh66]

Provectus Group hehehe woohoo.

[@ET_Drums]

M&P sights are a bitch to install. I always have to file the new ones down a bit so they fit right. My Glock buddy teases me on how easy his sights go in. Whatever, I love M&P. :) . How much did you have to fiddle with the sights to get them to fit? Oh and YT removed your first mag vid. Jerks.

[@anthonygonzales6029]

Night sights are pretty dumb and a waster of money! You aren’t gonna shoot at something you can’t see or identify at night correct? So what to do? You need light! Don’t matter what kind. WML, handheld, environmental. You need to know who and what they doing to shoot . And your black out or three dot white sights are going to do what you need them to do . Tritium is a waste of money