FIRST START UP ON 79 C10 WITH HOLLEY TERMINATOR X MAX!!!

  Рет қаралды 6,974

Mike Foster

Mike Foster

Күн бұрын

Пікірлер: 15
@joeknowski675
@joeknowski675 Жыл бұрын
Pretty smooth start. Any tricks or things to read up on that will help?
@Mikefoster81
@Mikefoster81 Жыл бұрын
Man just been tuning for awhile but there are some really great threads on Facebook and KZbin to help get you started. Actually the Holley can make it easy on you as well you just have to take it with a grain of salt sometimes. I’m always willing to help someone if they need it!!
@GreaserthoughtsGarage
@GreaserthoughtsGarage 4 жыл бұрын
How hard was this to do ? I am going to do the same thing on my c10 anything extra i need !!
@Mikefoster81
@Mikefoster81 4 жыл бұрын
Not hard just do some reading on different forums and Facebook groups for ideas. It’s been done time and time again. There’s lots of good info out there from different people.
@gulfdawg2806
@gulfdawg2806 4 жыл бұрын
Where did u mount ur ecu?
@Mikefoster81
@Mikefoster81 4 жыл бұрын
It’s mounted under steering column with led’s facing driver so he can see them.
@gulfdawg2806
@gulfdawg2806 4 жыл бұрын
Mike Foster okay thanks bro.. I’m installing tomorrow morning
@bigblock406ta
@bigblock406ta 4 жыл бұрын
Dam injectors I know how u feel
@Mikefoster81
@Mikefoster81 4 жыл бұрын
DirtCheapS well I’m not going to say that the fuel lines may or may not have been cleaned prior to assembly 😂
@bigblock406ta
@bigblock406ta 4 жыл бұрын
Mike Foster I put a brand new set in started the motor it ran really rich. I stut it off checked the data I put in to. HP tuners and started it about 2-3 mins later. It fired right off but it had filled the intake tuner with fuel. It then proceeded to shatter the connecting rod. I herd a very loud tic tic tic shut it off and thought was that a lifter? Let me start it up and check. Fired right up agen definitely not a lifter. Total rotations can be counted on the head of the piston there wher 15 digits the the piston in a Circular pattern from the valve hitting the piston and the crank case pressure pushing the position back up the bore. the motor actually rotated about 30 times between the two start ups. I pulled the fuel rail out, threw the switch and open full bore was #2 injector.
@bigblock406ta
@bigblock406ta 4 жыл бұрын
O and on the day befor my dyno appointment
@Mikefoster81
@Mikefoster81 4 жыл бұрын
DirtCheapS what brand of injectors were they?
@MemphisTruckMafia
@MemphisTruckMafia 4 жыл бұрын
😭😭😭 go down to Memphis with a hair cut like that....#901 checking in nice truck
@Mikefoster81
@Mikefoster81 4 жыл бұрын
Lol we run around with the Memphis 10 gettin them boys fired up is something I love doing!
@MemphisTruckMafia
@MemphisTruckMafia 4 жыл бұрын
🤟🏽😎
669hp Chevy C10 Boomhauer Gets Race Spec Suspension - and Still Has a Bench Seat
20:05
How To: Install Terminator X EFI on any LS Engine
18:27
Holley
Рет қаралды 379 М.
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
Terminator X Full Install and Overview
16:26
LS Swap SD
Рет қаралды 64 М.
Holley Terminator X - First Start Tips and tricks on LS C10
19:03
The Driveway Engineer
Рет қаралды 9 М.
Junkyard Turbo 5.3L LS - Engine Power S11, E14
21:27
POWERNATION
Рет қаралды 130 М.
Holley Terminator X Max install for newbies! Easier than you think!
31:20
What Holley Terminator X Do I Need?
15:57
BurnDown
Рет қаралды 41 М.
Round 2 - 1980 Chevrolet C/10 Square Body Cheyenne Truck First Start!
27:23
SquareBody gets VintageAir with Dirty Dingo
29:39
Lucky’s Garage Show
Рет қаралды 43 М.
Garage Built 600WHP Square Body Chevy Truck Grips & RIPS!
18:25
Autotopia LA
Рет қаралды 110 М.
CHOPACABRA CAM INSTALLED!!!! *SOUNDS WICKED*
18:39
lmfscrew
Рет қаралды 510 М.
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН