first test ride on the 2023 Husqvarna FS450

[@guillermomartinezlopez9017]

If I am not wrong people use to mount brembo 16 for the master cylinder. Why do you prefer the brembo 15 RCS instead? Is it because of the available adjustment (18-20) or it's a matter of feeling/ performance? Thanks in advance!

[@SUPERMOTOLAND]

We have tried the 16 but found it too stiff, most riders prefer a softer feel, but its all about personal preference. I know alot of racers like the 16

[@SAFRACING]

Hi I email few suppliers asking does it work on the 2023 ktm smr 450 they said no. How is the vortex running on the bike what model is the ecu

[@matadvancemoves3557]

The vortex ecu has to have a firmware upgrade to work with the 2023 bike. not all vortex ecus can receive the firmware upgrade, only the more modern versions. we need to test before we can comment on performance, next video in a few days.....

[@HutchSco]

Did you try the bike stock first, just got one for my wee man to race at crail, raced 140 last year and supermini this year, so this is all new to us for 23 😬🤣 any upgrade recommendations or must do mods 🤔

[@matadvancemoves3557]

The bike is awesome in stock trim. ride it like that first until you start reaching limits. the air forks are usually the first limiting factor, replace with ktech airtospring conversion or ohlins cartridges if you can afford it.

[@HutchSco]

@@matadvancemoves3557 cheers mat👍

[@louisjoubert8253]

I found that the Quickshifer is terrible, it works ok at low to mid rpm, but not at high rpm.

[@guillermomartinezlopez9017]

Are you able to adjust the time and delay and/or sensibility, or you just can use it as design?

[@louisjoubert8253]

Only as it comes from the factory. Apparently the dealer cannot adjust the cut time.

[@matadvancemoves3557]

it works better with the vortex, new video coming....

[@louisjoubert8253]

Mat, how long would you recommend the cut time with the vortex? 45ms?

[@matadvancemoves3557]

@@louisjoubert8253 we have 50 ms at the moment and it seems great