First Time Drifting in Malaysia ENDS BAD!

For my last day in Malaysia, I get to go drifting. Unfortunately, in the car I was driving a mechanical failure occurred & the wheel fell off mid drifting.
MERCH ► sammit.net
FIND ME EVERYWHERE HERE ► linktr.ee/sammit01
BECOME A MEMBER ► kzbin.infojoin
Why I drink Gamer Supps ► • Why Gamer Supps?
#Subscribe
#SAMMIT

[@shichimiyasatone726]

No door, no panel drifting open air in an airfield is NOT in my expected list at all. And now it's in my bucket list. Wtf Malaysia, didn't realise it's that wild there

[@shakld]

It always wild here

[@nimay13]

Too wild. Back in the early 2000s, people just raced on the streets. But nowadays too much cars on the road. It’s becoming too dangerous. If you lived through the 80s and 90s, it was all bikes. People would just lined up on the streets to watch these races. Very wild.

[@toyotacorollaaltis8613]

Alright I’m going to Malaysia

[@mochiyoon1771]

Appreciated

[@NAKDTV]

Names. . The names Tyler McCann and I will live in Tokyo Japan one day soon.

[@64thAGRS]

@@NAKDTVSame❤

[@MondropGaming]

If you have a fast black car and a hideable license plate you will be fine i recommend genting

[@GanjaNinja]

Ive always known that malaysia car culture is crazy but this video really opened my eyes. New holiday destination i guess

[@mochiyoon1771]

Appreciated

[@thiagothumbsup8686]

Welcome to Malaysia.

[@huhorbuniula4049]

Yeah but not many of our sports cars are modified.

[@izack0128]

The thing that I like Malaysia and the rest of South East Asia that people tend to try new stuff that most non SEA considered cringe, rare or directly illegal. Every car isn't CTRL C + CTRL V except for engine mods (rule of thumb here never kept the engine stock with cold air intake, always rebuilt) which is considered a lot. And most of all, thet build those because they are liking it not because of clout.

[@Albertius84]

Err Sam....that cute little kei car there is from PERODUA not PROTON actually....because Perodua Kancil (rebadge from Daihatsu Mira L200 series) was the second car manufacturer in malaysia.

[@Kaiyi3105]

I was just about to comment this 😂

[@Albertius84]

@@Kaiyi3105 🤣🤣 patut kau awal bangun pagi tadi bro.

[@DayDeckDDevilz]

Berani tol dia samakan proton dan perodua..tak balik jepun kang dakni..hahaha jkjk

[@Kaiyi3105]

@@Albertius84 ada sekolah la bro 🥲

[@Kaiyi3105]

Saya jatuh did sekolah🥲 stupid mud😭

[@5mcory976]

That red Cefiro is perfect. Every car in that garage was beautiful. Those dudes are doin it right.

[@munuhaas4608]

Motor maniac team✨

[@CelebesViking]

Malaysia is like hidden gems of everything goodness,the vibe the people the food the sea the nature and cars always in the next level. Thank you come to my beloved country. And thanks to all who giving him a warm hospitality and our car culture ❤

[@isaactezza]

as a malaysian in aussie, thank you for shining light on the automotive scene in malaysia. my ke79 back in malaysia wouldnt pass a raodworthy, not even the ligts. its a totally different scene there. i miss the malaysian car scene. no defects for shiett

[@africanotaku5453]

1:39 the rock is a true legend

[@sarifuddinsaadon6505]

Sam,next trip to Malaysia...better u take note to see n feel our drift king..tengku djan ley..right know he rocking with GR86...he is lagend among drifters in malaysia,he also have do the AE86 with v8 engine 😂😂

[@ngeo88]

Can visit Drift queen Leona too

[@retrophil8241]

On the Diecast and RESIN models you should definitely try IGNITION. It's a top quality Japanese brand that captures the details perfectly. Inno64 is also a cool brand. Plus ignition 3D scans everything to make a perfect replica. They also can do special limited editions were they also scan the owner. So ignition could make a car plus Sam model. I honestly don't know why all the automotive KZbin channels aren't doing it as it's another merch item that fans would love.

[@TheSharkGirls]

You were playing the Japanese maid role in that drift ride towards the end, you're only lucky the sound of the engine was so loud we couldn't hear you screaming! Loved your Malaysia trip. It is a very interesting place, in my experience.p.s. I might have come to this conclusion because the wireless kept freezing leaving you wide open mouthed for seconds at a time.

[@cd5sircoupe]

3:36 Oh hell yeah, don't sweat the technique baby. Such a classic song, they've got some good taste over there in Malaysia. What even is that pizza place? That's sick. Respect for acknowledging the Connecticut pies. He knows, he's had Pepe's & Sally's... Dude's learning about die cast & scale models, interesting. That Qube place is sick, those dioramas are awesome. I'm still trying to find one of my v35 Skyline, best I was able to do so far was a v36 from J Collection. Couldn't tell you what scale it is, but it's substantially larger than a Hot Wheels. I'd put it somewhere between there & a standard 1/24 scale model, so maybe 1/48? If you're gonna go in on making your own scale model car, go with whatever brand wants to work with you. There's a number of you could say lesser known manufacturers out there that make some absolutely killer product.

[@gotbigdreams.5257]

If u like hiphop go listen to our local rap group(already disbanded) Too phat Just a lil bit feat Warren G.

[@cd5sircoupe]

@@gotbigdreams.5257 I loved the footage in the video, the track itself was just aight though. Nothing special to my ears. But damn that nostalgia kick from the video...

[@zikriramdan8632]

10:05 i see myself, i’ve made it in a sammit video😂… so happy to experience drifting for the first time and sam was the driver to do it… hopefully i can see you again in malaysia

[@StaticModel]

Inno64 and MiniGT are the top dogs in diecast for realistic and scale 1/64 :) HotWheels are toy grade collectables, for general public who cares more about quantity rather than quality :) Also HW is much bigger brand owned by Mattel, Inc., if You ever ever create Sammit 1/64, realistically you have much bigger chance with MiniGT and Inno64 :)

[@MAV-jp]

Cefiro is amazing, looks gorgeous in that amazing warehouse setup!

[@MGAFFY]

Man that abandoned police airport place is sick, right in the city next to the highway. Also that Cube store is sweet with all those models and dioramas!

[@MAV-jp]

CA18 never sounded so good! Td06 with the Og gate, I’m taking notes lol

[@ArifKamaruzaman]

ey it sound really nice. I dig it

[@dannygamble7033]

The car sceen out there is on point think I need to sell up and ship my car over from the uk to Malaysia

[@connoisseuroftigolbitts]

Drifting on missing studs Is a SUPER NONO. I bet sammit is making sure all 20 lug nuts on a drift car!

[@Jon64scale]

Sammit if you were to do one of your cars in 1/64 scale I'd go Tarmac works or Mini GT best detail for the price 👌👍

[@christopherharris6005]

Awesome video as always Sammit. Malaysia 🇲🇾 has some awesome car culture and some amazing food. Dammit Sammit you always beak something on other people’s cars.

[@mrfunkymuir]

Very good video Sam 👍

[@KeViNMCMXXCIX]

That's was a cool trip! Gave great insight with the car culture there in Malaysia.

[@LawrenceSeetoh]

what a eild trip, thank you for sharing, Malaysia has an exciting car culture

[@jaydauhgoat_5]

Love the videos 👌🏼

[@Shinkaizen]

Tarmac Works & Inno64 is very detailed and comes with a great packaging right out of the box. MiniGT & Greenlight is somewhat mid. Hot Wheels are mass production with lack of details. Malaysia have a strong Hot Wheels fanbase btw. For a quality Limited Edition of your FD car, I would recommend either Inno64 or Tarmac Works.

[@yongling9825]

Mini GT's still fine for the most part, but their models are generally more detailed than Greenlight's.

[@buah_epal]

Thanks for visiting malaysia❤

[@Lolteej]

props to them boys man. They found bliss

[@kanenstuff]

Pitty it rained super hard we had to leave for a bday party in Changkat. Glad you got to see a lot of stuff here in Malaysia. Here is drive a manual E36 and in Australia a 180SX.

[@DayDeckDDevilz]

Thanks for coming sam..I'd recommend Tomica if you interested in starting a diecast collection.some of the premium ones can get really expensive but the detailing is crazy good.Burago also is a good choice that specialize on Ferrari cars.As a collector myself i cant find it in my heart to rip it open from the box..lol

[@yongling9825]

If you're talking about Tomica Limited Vintage Neo, yes, those do look detailed. Everything else lower than this tier in the company don't look close to detailed (sorry).

[@killersparton1]

i wish all countries had such a sick car culture

[@Kamil_SONE]

Proton Kancil is really famous in Malaysia yeah

[@SteveHarvey69]

The airfield where you are at is also a drag race spot (legal drag race btw but with modified cars)

[@N3xus_6]

Need For Speed Heat irl. Those garages, abandoned yards, meet-ups and back alleyways...bro!

[@Nelsea7190]

2JZ golf cart cart must have been great.

[@williamcapistrano2822]

crispyyy off throttles / clutch kicks, wow

[@NAKDTV]

10:07 I love the content. You can see the whole skeleton of the car ❤❤❤

[@kentw6596]

this mountain road its low key Mt. Akina for Malaysian. There are some crazy clips people record while racing up the hill..

[@fakhrulrazi6456]

One of it Topfoil evo climbing Genting Highland if I’m not mistaken

[@yongling9825]

​@@fakhrulrazi6456Yes it is, probably one of Malaysia's most internationally known videos lol.

[@gerttherude6366]

wow this looks insane , looks like I'm saving for flights lol :)

[@altypeRR]

That CA sounds sick! So much better than an SR!

[@silverputra]

Finally reached the Summit in Malaysia... Greetings from Malaysia too... 🤙🤙🤙

[@erwinpascua7407]

14:19 Ignition model, their stuff is pretty expensive but its worth it for how detailed it is

[@ameronrashidi2890]

Thank you for going to malaysia!

[@izzulislam9432]

wowww!! dasuki boss drift..

[@joeym2675]

I collect Hot Wheels especially the Mad Mike series! Those would be great in the smaller scale! But I think the Best Detailed And Accurate Model Is Revell Model Cars! They’ve done Collectible And Especially NASCAR Cars For YEARS AND YEARS!!! I used to buy those back when Dale Sr. Was alive and racing I would get deals on them at $30-$45 depending on the rarity of the car! But the were awesome models!!! I’d love to have one of your S15 Drift Car both designs! With a hood that opens up and a little hood prop would be sick!!! Great Tour Or Malaysia! Loved the mall car show/meet!

[@jwlms]

Dude that white Mira is sick.

[@uwurakin5785]

Mini gt,tarmac works and inno64 best without any doubt,I personally prefer Tarmac works and inno64

[@Kennon959]

Malaysia has strict import rules so Perodua & Protons were made in Malaysia based on Daihatsu or Mitsubishi cars.

[@F4834N]

Genting Touge 👌 Edit: thank you for the videos Sam. Been here all my life and never knew some of these activities were happening here 🔥

[@pidude1234]

i always see that airway when i go back home and i always saw cars and tents there didnt know it was a drift event

[@treoryiz1156]

Good work sam

[@dpiss]

Them Kancils looking good. Always so reliable.

[@Moto_]

Love it!

[@taksg199]

Inno64 would be my choice. Best detail for the price. Mini gt tend to be a bit brittle and ignition are more pricey. Lots of other brands but those are the better ones

[@takizawa257]

Welcome to malaysia

[@hitandrunrc384]

Inno64! Love all there cars details are ridiculous

[@joshuaheise7293]

Amazing real car festival next year I'm keen

[@sbiccaa3584]

the bare bones FD was awesome so cool

[@kleemanjad]

Next time you should try out the cubchai (moped) racing scene.. those bikes can go 100miles easy

[@shrinivasselvamani6884]

I am 1 of your Malaysian Sub. I have been watching your video allot man is awesome

[@raefakhri.official]

Thats why im really sad seeing the kcar (Mira) at Japan that abandoned with full bodypart and engine in it.😭 Because Im here still rocking that kcar for my daily life and its so damn expensive to export original part from japan because in Malaysia the Mira is like "rare" item in Malaysia. So its so expensive especially the engine. Because Malaysian Mira that what we call (Perodua Kancil) the stock engine have no turbo in it. Stock 660cc and 850cc no turbo. That why i kinda sad looking your video that all kcar Mira is abandoned like its very cheap and old car. But here, its so expensive 😂 Now when u see the Mira kcar with square headlamp in Japan. Its call Kancil here. 😂 Hope u remember that! 🤘🏻😂

[@JadenAltAc]

That Mclaren is fire tho 11:20

[@Fabulousprofound168]

Ignition model and inno64 are nice model brands, but they can get pricey.

[@shinshow6238]

it not a police airport, it used to be for malaysia royal army airforce, which they relocated to somewhere else, and now the land belong to a private contractor, not sure if some part of the field gonna remain for stuff like this to take place, since thr is plan redeveloped the airfield into a night entertainment area

[@Jon64scale]

Sammit epic vid love the car culture/Meet shows so much inspiration I collect/customize 1/64 diecast scale cars hence my KZbin name 👍

[@JohnLloydCaitom]

Bro you gotta try Thailand, try the long tail river boat with a diesel engine in it, with massive turbos

[@darrenparsons1988]

Cool diecast store! I collect hot wheels and mini Gt/Kaido house. Would spend alot of money there lol.

[@idwellinthehillslikegandhi]

Watching you geek out over the CA was great. That thing did sound amazing..i forgot how much i love those engines

[@savagekoala2555]

I collect mini gt and have fausto's silvia haha. I've been waiting for a diecast car from your collection to be real

[@hauserspec4039]

Do the Diecast I’ll definitely swooop one ! Or a few 😬 and you should make a limited number Sammit diorama !

[@kyleroll95]

Next time you come malaysia you should contact nim 199 garage... He has some good evo collection

[@silverdashhd644]

Daihatsu Mira are called Perodua Kancil some locals do half cuts of the cars

[@harisalkhufet4311]

The drifted tyre got so tired that it decided to split and left the car for good😂

[@TristanYZY]

Every time I travel to KL I would drive there The roads are fun man Visiting Tokyo for the first time tmr 😅

[@DLYNCH27]

IINO 64 doesn't make an 1/18 scale. Ignition Model is higher end and a Japanese company and make nicer stuff I would personally choose them but definitely tougher to get an approval.

[@scottarguelles4898]

It's crazy me and that dude are the same age and we both been watching since you started for soo long now lmao.

[@joeyjr4006]

o you need a Subaru in your collection❤❤❤

[@stevendurbin9006]

Have that same king edition rhd s13 thats really clean inside and out only parts none oem ive done in the past 10 years since i got it at the port is a axle back exhaust coilovers and wheels but due have the original parts i took off my overall goal with the car was actually have one car that stayed oem as much as possible and keep super clean car is flawless inside and out but currently have decided too sell the car im located in the usa if ya wanting a nice usa car too add too your other car you have here at jimmys

[@Mikailke21]

ive never expect you coming here in malaysia

[@Fokieu]

mantappp 🔥

[@geonghuber2606]

in scale model cars, I'm mostly IG Modelcar, KYOSHO, Make up, Racing 43, Meri Kits, Spark, I only do 1/43 scale

[@chrysler300tnt440]

I would do a 1/24 model kit with fujimi or aoshima.

[@LochnessMonstaa]

Sam pleasee do a MiniGT. Looks like you had an awesome time!

[@caine_t]

inno64 I find there detail is so good compared to the others personally, they also do resin models which are pricier but worth it Also what cams are in the ca18? Sounds so good!

[@dragin_dave85]

I would pay the inno64 premium for sure, but if you went mini gt that would be awesome too.

[@SquishyAutomotive1]

Please do a hotwheels set I’m a big collector and I would love to see it. And dude you should put a CA18 in the abandoned S15!

[@jahmanglass5]

Honestly if you get diecast cars made of the FD drift car I would definitely buy some 1000000% would love to see some 1/16th versions too !!! 🔥🔥🔥🔥

[@thesorungan_Bularksapiink]

Wow finally bro in malaysiaa

[@richardspears5384]

I had a CA18DET in my Bluebird lasted about 3 months spun a rod bearing and then bent a rod babying it off the main road... It my finest moment.

[@Pieappl628FRLEDITS]

I really like the s13 And I want you to build one

[@aaronnaguinlin189]

Do inno64 sam! It's very detailed also it has a acrylic case.

[@ThisnametaKenny]

great hospitality

[@AFIQ1008]

It all the convert Daihatsu. It's was Perodua kancil and kelisa

[@segopadang666]

nice community car 👍

[@jakep5414]

Sammit forget the die cast. What you need to do is get in contact with yokomo rc Japan. They need a current chassis ready to run car with a current Japan FD body on it. You'd be perfect. I'm a pro RC FD driver for team Hobbywing

[@waervapor_chanel6321]

welcome to malaysia❤❤

[@organiccotton2731]

If you want to up the antee you gotta blast pop shovit-mara bahaya song while you drift😂😂😂

[@wallacelee4202]

welcome to malaysia

[@TECHPBMUNK3H]

Inno64 make very detailed diecast i would go with them 100% , they sell for around $25-30 usd when i see the online