Truck and Paint look Great Chad ,, quite a challenge on pin stripping but looking Good , hats off to you for attempting on your own , always been fascinated with free hand pinstripes,, old school cool along with hand painted lettering !! Safe travels Chad 👍👍👍👍
@1ChadKeegan22 сағат бұрын
@@davidkennedy7153 Thanks 🙏🏻
@BS-Outdoors132022 сағат бұрын
Now for a happy little tree over here in the corner, I'm getting a Bob Ross vibe from this episode. My artistic ability stops at stick figures. Hell my paint by numbers shit looked fugly, there's no way i would even attempt this so props to you bro.
@1ChadKeegan22 сағат бұрын
@@BS-Outdoors1320 it’s definitely a challenge covering all this ground I’ll be happy to create some smaller pieces on the truck
@rorypengov678923 сағат бұрын
A lot of things we can't do the first time but we figure it out as we go looking good keep up the good work 👍
@1ChadKeegan22 сағат бұрын
@@rorypengov6789 Thanks 🙏🏻
@gwstonemason23 сағат бұрын
Chad,. Done great for a first time pinstriper. I chickened out and used the thin tape, painting between the lines. Happy Birthday mate.
@1ChadKeegan22 сағат бұрын
@@gwstonemason 🍻🤙🏻
@taffyjones577 сағат бұрын
Hi, Chad. The Frankenstein 2 looks so cool. Well done on your painting skills. I can't wait to see the finished truck. I would really like a picture of Frank 2 when its finished. It will look great on the road.
@1ChadKeegan7 сағат бұрын
@@taffyjones57 Thanks 🙏🏻
@michiganhoosiers0316 сағат бұрын
Happy Birthday Chad! Its your truck and you do you. I think it's awesome you are trying something new. Never forget the pros had a 1st time also. Looking forward to seeing Frank videos with the new look.
@1ChadKeegan11 сағат бұрын
@@michiganhoosiers03 Thanks 🙏🏻 🍻
@danielseelye600522 сағат бұрын
I think I remember seeing on some of those restoration shows on TV some pinstripers would have a stick with a soft ball at the end to support their painting hand at the wrist when going at it.
@1ChadKeegan22 сағат бұрын
@@danielseelye6005 I’d believe it but that’s just to much for me to have in my hands
@huggy171222 сағат бұрын
Chad awesome when you put the black pin stripe that made the light green come right out the colour scheme awesome Chad now you have inspired me to redo my pick up truck 😀
@1ChadKeegan22 сағат бұрын
@@huggy1712 Do It 🤙🏻🍻
@RandyFreitas-hx9zc23 сағат бұрын
Looking good Chad! Especially for a rirst time! You have talent!
@1ChadKeegan22 сағат бұрын
@@RandyFreitas-hx9zc Thanks 🙏🏻
@wimvangraas67283 сағат бұрын
I admire your love for cabovers and old school pin striping, doing so making it YOUR truck... safe trips with those K100's
@1ChadKeegan2 сағат бұрын
Thanks 🙏🏻🍻
@jonathanmerica50156 сағат бұрын
I like what you did brother. Frank is looking good. Keep doing what you're doing, you'll have a great looking truck. Can't wait to see it all done great video.
@1ChadKeegan5 сағат бұрын
@@jonathanmerica5015 Thanks 🙏🏻 🍻
@michaeldalzell6670Күн бұрын
Happy Birthday Brother Chad, Frank is lookin sharp. Great seein Kim in the video
@1ChadKeegan23 сағат бұрын
@@michaeldalzell6670 🤙🏻🍻
@Jagparts2023Күн бұрын
Chad Keegan , Loved and Respected here in England.
@1ChadKeegan23 сағат бұрын
@@Jagparts2023 🍻❤️
@leyland68011 сағат бұрын
Fantastic job, livin the dream, old school is the only school👍👍👍👊👊👊
@1ChadKeegan11 сағат бұрын
@@leyland680 Thanks 🙏🏻 🍻
@richardhoneywell741117 сағат бұрын
Great video Chad the pin stripping looks good on Frank. Happy Birthday Chad thanks for sharing.
@1ChadKeegan11 сағат бұрын
@@richardhoneywell7411 Thanks 🙏🏻
@keithchapman72206 сағат бұрын
In the last shots I could see the tints you added to the clear, that’s cool af!!
@1ChadKeegan5 сағат бұрын
@@keithchapman7220 🙏🏻🍻
@hansstellingsmanetherlands55484 сағат бұрын
Good job Chad... 🤜💥🤛 Its Frankenstein your doing it...😁 Cant wait to see the results
@1ChadKeegan2 сағат бұрын
Thanks 🙏🏻 🍻
@thebutchersdog20022 сағат бұрын
You finally made it over to my neck of the woods. Pittsburgh is the worst to drive thru. Happy birthday too buddy!!!
@1ChadKeegan21 сағат бұрын
@@thebutchersdog200 Thanks 🙏🏻
@projectprogaming298038 минут бұрын
Very very awesome video buddy frank is looking very cool that pin striping looks so difficult but the end result will be very good keep up your amazing work my friend stay safe 👍
@brianbishop356214 сағат бұрын
I honestly love it it gives Frank character
@1ChadKeegan11 сағат бұрын
@@brianbishop3562 🍻
@susansullivan925521 сағат бұрын
As they say..slow and steady wins the race .... definitely an art to pin striping . 🚛🚛🙋...ps happy birthday 🎂..
@1ChadKeegan21 сағат бұрын
@@susansullivan9255 Thank You 🙏🏻
@bradlegg302510 сағат бұрын
Hey I saw you in West Virginia going down route 2 and it was cool as hell to see you and your truck rolling down the road
@1ChadKeegan10 сағат бұрын
@@bradlegg3025 that bridge had me worried till I read the sign correctly that said Sides!! 🍻
@timflegal152223 сағат бұрын
Good job Chad.
@1ChadKeegan22 сағат бұрын
@@timflegal1522 Thanks 🙏🏻
@billywhite302018 минут бұрын
Chad you are so cool it's going look great when done
@damiennapier949217 сағат бұрын
Watching from Australia at least you can say you did it yourself the pinstripe and paint I’m a owner driver myself I have a 1999 k104 aerodyne myself it’s not easy working on the truck but saves money
@1ChadKeegan11 сағат бұрын
@@damiennapier9492 Absolutely 👍🏻 🍻
@chadtanner19 сағат бұрын
I have no idea what I’m talking about but. Get some more metal flake to mix in with the clear. Spray that spot or any other spots missing the metal flake. Then switch back over to just the regular clear. To spray your final coat or first coat whatever. Just a thought,.truck looks great though as is.
@1ChadKeegan11 сағат бұрын
@@chadtanner I still have a little bit left I could do a mix for the spots 🤙🏻🍻
@nelsonmattoon15017 сағат бұрын
That looks awesome for the first time
@1ChadKeegan11 сағат бұрын
@@nelsonmattoon150 Thanks 🙏🏻
@charlottealdridge218010 сағат бұрын
Great work Chad keegan and Great video as usual
@1ChadKeegan10 сағат бұрын
@@charlottealdridge2180 Thanks 🙏🏻 🍻
@larryspencer76Күн бұрын
Looks badass chad.
@1ChadKeegan23 сағат бұрын
@@larryspencer76 Thanks 🙏🏻 🍻
@randyhale418122 сағат бұрын
Keep going buddy you doing a fine job🎉🎉🎉👍🏻
@1ChadKeegan22 сағат бұрын
@@randyhale4181 Thanks 🙏🏻
@neilmcintosh120022 сағат бұрын
You have the guts to have a go!
@1ChadKeegan22 сағат бұрын
@@neilmcintosh1200 Definitely 💯
@FJ-kc6fo22 сағат бұрын
Better than my plans for cabover lol, going straight rattlecan special. Unless a artist friend of mine wants to create something awesome
@1ChadKeegan22 сағат бұрын
@@FJ-kc6fo I’ll paint anything I’m just not sanding anything and unless it’s a scuff and shoot
@FJ-kc6fo21 сағат бұрын
@1ChadKeegan I'd at least scuff so will stick well, even with spray can that ocd will have me on it. Can't wait to see how you finish up frank, I like that ghost stripe and greenish metallic
@1ChadKeegan21 сағат бұрын
@@FJ-kc6fo Thanks 🙏🏻
@devinrussell42018 сағат бұрын
I've heard of professional modelers buying the bottles of pre-thinned polyeurethane House Of Kolor automotive custom colors for airbrushing custom built 1/24th & 1/25th scale plastic model cars to be entered in the IPMS modeling contests and the the end results are fenomenal.
@1ChadKeegan11 сағат бұрын
@@devinrussell420 I’d believe it
@holdenbrougham105622 сағат бұрын
Happy birthday again Chad, I watched birthday last year mate , hope you eat more this time
@1ChadKeegan22 сағат бұрын
@@holdenbrougham1056 🤙🏻🍻
@keithcalhoun941610 сағат бұрын
That is a way better freehand job than I could have done, my hand is not that steady. I like it looks great in my opinion.
@1ChadKeegan10 сағат бұрын
@@keithcalhoun9416 Thanks and I’ll do some for Betty when she’s ready!
@beigebrother178511 сағат бұрын
Cheat code - get a pinky sock for finger helps with the glide....... Sip on your beer and go at it!!! Great job tho
@1ChadKeegan11 сағат бұрын
@@beigebrother1785 I like that idea
@davidkelley594023 сағат бұрын
Good video buddy
@1ChadKeegan23 сағат бұрын
@@davidkelley5940 🤙🏻🍻
@jameshenry392112 сағат бұрын
You need a couple of buckies first. Great vids keep them going cant wait to see Frank 2.0 when its done
@1ChadKeegan11 сағат бұрын
@@jameshenry3921 Thanks 🙏🏻
@billywhite302017 минут бұрын
They look great
@anthonybuzzelli20 сағат бұрын
Keep up the good work!
@1ChadKeegan11 сағат бұрын
@@anthonybuzzelli Thanks 🙏🏻
@chriscargle263922 сағат бұрын
Looking awesome , got a more steady hand than I do , lol I shake so bad I could thread a sewing machine while it's running
@1ChadKeegan22 сағат бұрын
@@chriscargle2639 it’s definitely a challenge
@mikescenters578520 сағат бұрын
Looks great chad ❤
@1ChadKeegan11 сағат бұрын
@@mikescenters5785 Thanks 🙏🏻 🍻
@nelsonmattoon15016 сағат бұрын
I like the color combo
@1ChadKeegan11 сағат бұрын
@@nelsonmattoon150 🙏🏻🍻
@glens203622 сағат бұрын
I would have used painters tape as a template for making straight lines, like on the doors. Good job though brother, it's still the Frankenstein truck.
@1ChadKeegan22 сағат бұрын
@@glens2036 that wouldn’t have been a challenge then 🍻
@glens203621 сағат бұрын
@@1ChadKeegan I gotchya.
@1ChadKeegan21 сағат бұрын
@@glens2036 I had the original color change line to go with but sometimes I was going the opposite way to see it. 🍻
@the7tongardengnome20 сағат бұрын
I did a hori sign writing job on me van yonks ago and thought it was Kool until someone said "I like your sign writing" I knew then it was crap and he was being sarcastic 😅
@1ChadKeegan11 сағат бұрын
@@the7tongardengnome but I bet he couldn’t have done any better 🍻
@bucklive22 сағат бұрын
Happy birthday from bucklive
@1ChadKeegan22 сағат бұрын
@@bucklive Thanks 🙏🏻
@brianbishop356214 сағат бұрын
I'll be dead serious with you Chad you honestly didn't do that bad for your first time and happy birthday to you also
@1ChadKeegan11 сағат бұрын
@@brianbishop3562 Thanks 🙏🏻 🍻
@RandyFreitas-hx9zc23 сағат бұрын
Cushman scaffold!
@1ChadKeegan22 сағат бұрын
@@RandyFreitas-hx9zc absolutely
@dougclarey324121 сағат бұрын
U might try running a line of 1/4 inch maskingtape above you line,use your pinky fingernail to catch the tape to guide your hand...works good on long lines
@1ChadKeegan21 сағат бұрын
@@dougclarey3241 🤙🏻🍻
@GillRigged14 сағат бұрын
Yo, I used your code to get that cooler and battery pack 🤘
@1ChadKeegan11 сағат бұрын
@@GillRigged Hell Yeah!
@holdenbrougham105622 сағат бұрын
Hi Chad scroll work ,, I've never tried and was quoted 6,800 dollars to do my k100, I sold that truck so I'm yet to have a go a scroll work , I've watched the pro guys before , practice it mate , keep practising, give brush to wife , who knows , artists come in male an female versions
@1ChadKeegan22 сағат бұрын
@@holdenbrougham1056 she only wants to bring the beers 🍻
@johnmeyer91086 сағат бұрын
The tape is probably fine line you can put it on edge of tape line fro masking off collor the put another piece the thikness of the pinstrip paint inbetween
@1ChadKeegan5 сағат бұрын
@@johnmeyer9108 🍻
@adrianrichardson700211 сағат бұрын
Add some vertical lines In some chosen spots of the pinstripe to simulate hair line and some where in the front right panel you need to add that Red open line somewhere to simulate that blood cut mark on his right forehead area ???
@1ChadKeegan11 сағат бұрын
@@adrianrichardson7002 probably won’t be any red on the truck 🍻
@markstack230922 сағат бұрын
I got a name for you Shakeys thick and thin pin stripping lol good start
@1ChadKeegan22 сағат бұрын
@@markstack2309 🍻
@deejayyork3535Сағат бұрын
Fucking can't wait till I see the final result Chad awesome dude that's how ya make it yours dude fucking ayee rock on bro.
@philosophyoftrucking23 сағат бұрын
Mr. Mojo Risin
@1ChadKeegan23 сағат бұрын
@@philosophyoftrucking 😎🤙🏻🍻
@holdenbrougham105622 сағат бұрын
Use masking tape for the main lines Chad, paint between tapes
@1ChadKeegan22 сағат бұрын
@@holdenbrougham1056 Thanks not freehand 🤙🏻
@jamesmarcum232318 сағат бұрын
Sweet Hell ya.
@1ChadKeegan11 сағат бұрын
@@jamesmarcum2323 🙏🏻🍻
@nelsonmattoon15017 сағат бұрын
Pin striping is very hard . Really have to have a steady hand
@1ChadKeegan11 сағат бұрын
@@nelsonmattoon150 🤙🏻
@johnmeyer91084 сағат бұрын
Use one hand like a pencil and drag it its probably enamel paint reducer will wipe it right of without hurting paint enamel needs no hardiner
@1ChadKeegan2 сағат бұрын
Hardener brings the gloss
@holdenbrougham105622 сағат бұрын
1st marks are just trace lines and they can be enhanced
@1ChadKeegan22 сағат бұрын
@@holdenbrougham1056 🍻
@生澤誠23 сағат бұрын
do your best
@1ChadKeegan23 сағат бұрын
@@生澤誠 Absolutely
@adrianrichardson700211 сағат бұрын
It’s the Frankenstein ??? So the lines don’t have to be spot on perfect right ??? As a matter of fact; didn’t Frankenstein have stitches in his head ??? Would be cool if you make those pinstripes look like stitching from one color to the next ??? Idk…
@1ChadKeegan11 сағат бұрын
@@adrianrichardson7002 there will be some more stuff coming 🤙🏻🍻
@mjkrigging637423 сағат бұрын
Looking good. Did you get the new gasket for the wind shield?
@1ChadKeegan23 сағат бұрын
@@mjkrigging6374 I’ve had them for 2 years now I took them from Garrett’s truck and just haven’t put them in yet
@mjkrigging637411 сағат бұрын
Cool I remember now when you got them. Hard to believe 2 years where does the time go
@1ChadKeegan11 сағат бұрын
@@mjkrigging6374 fr fr
@metalhead718117 сағат бұрын
Shittsburg is the proper name. Lol
@1ChadKeegan11 сағат бұрын
@@metalhead7181 🍻🤙🏻
@scottswartz661919 сағат бұрын
put 2 pieces of tape down the width of your strip and paint it
@1ChadKeegan11 сағат бұрын
@@scottswartz6619 🍻
@holdenbrougham105622 сағат бұрын
Try to brace your hand an pivot on the one point swinging brush with other free part of hand , oh hard to explain , watch videos chaddy boy your smart an cluey and I bet you'll get it
@1ChadKeegan22 сағат бұрын
@@holdenbrougham1056 😎
@conniewoodruff470622 сағат бұрын
Pittsburg beat my Denver Broncos I’m not happy about it at all.