FIRST TIME IN 57 YEARS!!! TRANSMISSION EXTRACTION! RESURRECTION RESTORATION! VW Kombi, VW Bus, Vdub

I removed the transmission in this bus after 57 years!!! This 1962 Volkswagen Type 2 Van/Bus has been sitting for over 40 years. Let's see if we can bring it back to life!

[@CTmoog]

ＬＩＫＥ | ＣＯＭＭＥＮＴ | ＳＨＡＲＥ | ＳＵＢＳＣＲＩＢＥ | Press the bell Icon - THANK YOU!!! CT =)

[@diamondknight1530]

Keep up the good work buddy

[@thefergusonlover5898]

CT I know the pain I’m restoring my 1949 Ferguson TEA20 and this bolts do not come off I have to cut them off 😂👍🏻

[@dalmosantosfagundes5436]

God bless you in this project

[@dalmosantosfagundes5436]

I liked workshop.where do you live? What state.

[@dalmosantosfagundes5436]

Sorry for asking

[@steves4639]

enjoyed the birds singing in the background...nice change from the usual guitar rock in most vids....zen and the art of VW maintenance. also, the dreaded 'can we talk?'

[@CTmoog]

Thanks Steve! Yes, it was a beautiful day! Thank you! THANK YOU!!! =) Stay tuned for more!

[@carlburgess9635]

Around 20.05, when you were taking off the starter cable, I could see asbestos dust fly each time you hit the heater duct. BE CARIFUL WORKING ON OLD STUFF! Thanks for the videos

[@davidk6271]

Carl Burgess - i was worried about that too, but wasnt sure whether it was asbestos or not, but anything that looks flaky white on that age of vehicle needs to be avoided. I see a lot of you g men dont wear masks or lift stuff without thinking. I wish i had worn masks and not lifted quite so much stuff when I was a youngster.

[@calliope1]

It’s not asbestos. Its a fiberglass like nomex.

[@calliope1]

And I also appreciate this video without full edit with all the struggles! Just like many people watching your channel you learn and get better by doing it! It pays to be a bit meticulous with what you are doing. Don’t be afraid to “take a step back” if it is fighting you. On my Singlecab the other week I tried to make things easy by installing a “D” bolt on the Starter. Didn’t chase the threads before installing and it was galled up halfway. We barely got it out again. Had to call in backup and it was a bear! Thought we would need a Dremel and cut off wheel to remove that bolt. Needless to say I chased the original hex bolt and nut and threw a few wraps of electrical tape on it to make it hold in the trans for a one person engine installation. About five minutes of my time would have saved a few hours of fiddling with the thing.

[@CTmoog]

That's good to know! I thought I read that on the Samba a few weeks back.

[@CTmoog]

Thanks man! I'm glad you enjoyed it! I hear you. It's easy to get in a hurry and mess something up! Stay tuned! =)

[@manelk8]

The Mrs CT appearance and protest was epic. Behind every good man is a strong woman....and she didn’t say when am I getting my garage back and when are you building that greenhouse! Great video and continued success and lasting relationship

[@CTmoog]

Thank you! Yes she is pretty strong! Yes that's my garage she can't have it!!! =) Thank you very much! THANK YOU!!! =) Stay tuned for more!

[@stantheman6411]

Hey, you have a very lovely wife that seems very patient of your hobby. I appreciate her kindness as you video your progress. I also enjoy the music at the end. I can only imagine how patient you must be.

[@CTmoog]

Yes, she is very understanding! I love her very much! I try to be most of the time! =) THANK YOU!!! =) Stay tuned for more!

[@jamie-r2034]

Thank you! And I thank you because I'm currently doing the same thing to my bus and have given up SO MANY TIMES over the last 2 years!!! I typically say a few curse words, walk away, give it a day or so, watch a few youtube videos like this & then get back on it. So thank you for continued inspiration!

[@CTmoog]

Keep it up man! You can do it! One day at time! It might takes a few years! Its the journey and learning along the way that matters! =)

[@Doubleodude]

Man that stuff is easier when we all were young. Congratulations on another step.

[@CTmoog]

Thanks man! I know! This old age stuff is no fun! THANK YOU!!! =) Stay tuned for more!

[@Doubleodude]

CT looking forward to it. I completed my welding on the back deck of my bus. I should have video completed and uploaded in the next couple days. It’s all baby steps.

[@r.harlansmith7282]

Yes. I love hearing the birds. And the Asian music at the end. More of that, please.

[@ianallen2]

This was a pain to watch in a way. I was shouting at the screen you will snap them bolts as you were tightening instead of loosening. Then when you were trying to remove the gearbox, I was telling you the hand brake cable needs to be undone, but you wasnt listening. Must have had rust in your ears. lol. I admire you doing this all on your own. You remind me of me when I was younger. I used to remove engines and gearboxes and replace them all on my own and wouldnt ask for help. I trusted my own work on cars and nobody elses. Great video, but a pain to watch you struggle at times. :). Keep up the good work. It will all be worth it in the end.

[@CTmoog]

Thanks Ian! I hear you man! Learning as I go and having a blast doing it! I thought I heard someone yelling at me! I just thought it was my wife again! =) Stay tuned for more!

[@davetaylor9202]

does this really know with he s. doing that was painful watch

[@CTmoog]

Hey Dave, I'm pretty sure he has no idea what he's doing! =)

[@ao2528]

Same here.

[@ianallen2]

@@CTmoog You are learning as you go along. You will soon know this old van like the back of your hand. :).

[@8891202513]

Nice video

[@michaelengel3407]

Yes, keep on fighting all the bolts. A hard work well done. Very interesting the gear reduction at the wheel hub. Greetings from rusty's home in germany.

[@CTmoog]

Hello Michael! Thank you! Yes, it is a very interesting design! THANK YOU!!! =) Stay tuned for more!

[@davidk6271]

I’ve done the left to right thing a few times , tightening stuff up when i am trying to loosen it! The relief always outweighs the embarrasment. Good work. Thanks for posting.

[@CTmoog]

Thanks David! Yes, it happens to the best of us! THANK YOU!!! =) Stay tuned for more!

[@alohahobbies]

CT, welcome to Hawaii. I have a 1967 bus and am in exactly the same situation. Nice music.

[@vitorcamilo6796]

When I saw your video, I remembered when I went through the same difficulties, dismounting for the first time. The funny thing is that I forgot that the video is not live, and even if it was there is no audio transmission between my house and yours. Even so, I kept telling you what you were forgetting to pick up and hoping you would find out what was missing.

[@CTmoog]

Thanks Vitor! I'm glad I can bring back good times for you! THANK YOU!!! =) Stay tuned for more!

[@bradrichards6107]

My wife fusses at me about my choices for my "garage wardrobe." I now have an agreed upon group of shirts that I wear while working in the garage or in the yard. :) I am glad to see that you used large amounts of PB Blaster. PB is your friend with projects like this bus. The bus is coming along nicely.

[@CTmoog]

Hey Brad! I always end up wearing my good closes out to the garage thinking I'm just going to go look at something and the next you know I'm pulling out the transmission! Gotta love the PB! THANK YOU!!! =) Stay tuned for more!

[@EmanDeluxeVLOGS]

Nice job CT! Another good looking component to the puzzle. Clean it up. Run it! Right on brother!

[@CTmoog]

Thanks my friend!!! Getting there! Ione day at a time! =)

[@edwardmckenzie3402]

nothing like a man with a hobby!

[@CTmoog]

I'm having too much fun! THANK YOU!!! =) Stay tuned for more!

[@triviace]

Parts of vehicle haven't seen the light of day since they were in the factory.I glad it's you ,I'd have given up long before,probably when brought it home.

[@CTmoog]

Yes, I don't know why but I really enjoy working on these old cars and trucks! The more rust, dirt and greese the better! =) Hang in there with me! THANK YOU!!! =) Stay tuned for more!

[@abidou1999]

Nuts, turn right to tight,and turn left to undo!!I was screaming at you(Your are goint to break that bolt.Its ok your are doing good.So many years,those bolts are not rusted.Amazing.

[@CTmoog]

Hey Tom! I thought I heard someone yelling at me! =) I know they are in pretty good shape! THANK YOU!!! =) Stay tuned for more!

[@GoodOldMike]

I'm 1/4 of the way the a the moment. The part with Mrs. CT cracked me up. I'm sure u will pay for that! Hehe

[@tomthumb1941]

Put jack stands under the frame on each side to support the body, then lower the transmission with the jack to slide out from the bottom, don't depend on just the jack, very unsafe. take your time, you are doing good, I enjoy the videos.

[@CTmoog]

Thanks Tom! Good tip! I really appreciate that! THANK YOU!!! =) Stay tuned for more!

[@captainbleedinobvious1684]

Hi CT that looked like a long day. Good job.

[@CTmoog]

Yes sir! It was! Thank you so much! THANK YOU!!! =) Stay tuned for more!

[@OkFixer]

Love the lapse time video Good job!

[@CTmoog]

WOW! Thanks man! I really appreciate that! THANK YOU!!! =) Stay tuned for more!

[@romuhamsteri]

Hello! Again, looks very interesting! I have to rush to work, it's annoying when I can't watch this now!

[@CTmoog]

Thanks man! Maybe you can catch up later? THANK YOU!!! =) Stay tuned for more!

[@romuhamsteri]

@@CTmoog Yes, as soon as I came home I watched your video! :) That trans was a bit stubborn and didn't want to leave heh :) Looking forward to the next video!

[@CTmoog]

Thanks man! Yes, it was a bear to get out! =)

[@whoispradeep]

I am surprised why are there thumbsdowns?! You are doing great I am hopeful you will bring this van in life soon. Good luck!

[@TheShadeTreeFixitMan]

Success! "Lefty Lucy, Righty Tighty" is the rule of thumb when removing bolts.

[@CTmoog]

Hey George! Yes! Sometimes you get turned around when your laying on your back! =)

[@SteifWood]

*Loosey ???

[@rustybum2]

Well done CT, this takes me back over 30 years when I struggled, just like you, with my 1959 VW camper, Can I suggest a few things which I know will make your journey a lot easier :- a Haynes manual (cheap on Ebay), a set of ratchet wrenches, a special brake line wrench and a comfortable crawl board-----treat yourself ! Best regards from the Emerald Isle.

[@CTmoog]

Thanks man! Great info! I will do all of those! Stay tuned!!! =)

[@louinesspaul2998]

Good job you figure it out, sometimes It’s just simple things (BRAVO)

[@GoodOldMike]

Nice job. I appreciated the e brake cable release detail as I have that coming up in my very near future. 😀

[@CTmoog]

Thanks Mike!

[@thebillbaker4793]

Well, I love the sound of a wrench hitting the floor and the ooooh! when you hit your hand with a hammer. Two days of "your going to come out of there!!!" I like it. Stay thirsty my friend.

[@CTmoog]

YES!!! You gotta love it! I'm very thirsty!!! THANK YOU!!! =) Stay tuned for more!

[@franciscomontoya383]

es un fantástico vídeo me loe mirado muchas veces, y ver la paciencia que as metido en esta carraca uffff , pero vale la pena verlo asta el final buenas herramientas amigo, te mereces el premio de la VW y las piezas de recambio gratis de la casa

[@tonypeters8298]

Must say that you are a patient man CT. I usually become creatively descriptive after skinning my knuckles. I also have a tendancy to throw sockets, 10mm ones! Love ya work. Cheers Tony (Down under).

[@CTmoog]

Thanks Tony! I try! It's not always easy but I usually pretty good under pressure! =) THANK YOU!!! =) Stay tuned for more!

[@gregorylomax1141]

Hi CT, from Sydney Australia, iust fond your channel and subscribed, watching your channel is like reading a book you just can't put down, I have a lot of your videos and playlist to go through to catch up, but really looking forward to it😊

[@lauratarango8225]

Greetings CT.Good job. You are a master .

[@NEJ81]

Da trabalho mas tenho certeza que será uma das melhores restaurações em veículos no KZbin... Parabéns guerreiro 👊😎... Só aguardando novos vídeos

[@CTmoog]

THANK YOU!!! =) Stay tuned for more! Did you subscribe?

[@claytonroberto9484]

Excelente,estou aqui do Brasil acompanhando esse trabalho,esta Kombi vai ficar linda!

[@CTmoog]

Hello Clayton! Thank you so much! THANK YOU!!! =) Stay tuned for more!

[@greenthingone6271]

Well, that was a piece of cake getting that gear box out, especially when tightening those bolts. As homer Simpson once said "doh" 😁 👍

[@CTmoog]

HAHA! Yes, I love Homer! Live and learn! THANK YOU!!! =) Stay tuned for more!

[@zztechs]

Good job of not giving up...

[@CTmoog]

Thanks man! THANK YOU!!! =) Stay tuned for more!

[@ali41abdulla]

Keep going dude always make your records more time i like your way have great time man

[@CTmoog]

Thanks Ali! TI will! HANK YOU!!! =) Stay tuned for more! Please Subscribe and click the bell!!!

[@mauriciocasotti6248]

Congratulations, your van is not bad underneath.

[@CTmoog]

I know. It's in pretty good shape for how bad it looks on the outside! THANK YOU!!! =) Stay tuned for more!

[@jefersonrodrigues6983]

I love this work!! This vídeo is terapy!!! Sensacional!!! Very relax!!!

[@CTmoog]

Hey Jeferson!!! Thank you! I'm glad you like it! Stay tuned for more! =)

[@erikturner8687]

You got in trouble for wearing a good shirt....that’s great! 😆👍🏻💪🏻

[@CTmoog]

YES!!! =) good times!!! =)

[@michaelclutton8446]

Good video enjoyed it your making good progress, I was shouting at the screen your turning it the wrong way. Easy to be smart when your sitting in a comfortable chair watching someone work.

[@CTmoog]

Thanks Michael! I think I heard you! =) THANK YOU!!! Stay tuned for more! =)

[@bigjohn4574]

Good Job Man. After watching you pull that rusty trans I need a 12 pack of MODELO beers. You'll get there.

[@CTmoog]

Thanks man! I'll take 24! =) THANK YOU!!! =) Stay tuned for more!

[@motorfreaknew]

it was like review me when i restored my 1969 beetle..... i suffered with you :) thanks for sharing!

[@CTmoog]

Nice! thanks man! I appreciate that! THANK YOU!!! =) Stay tuned for more!

[@notajp]

Keep up the hard work, CT! Anything worth having is worth working for. You’ll have something to be proud of when you’re done! BTW, get some ratchet wrenches (Gearwrench). You’ll wonder how you ever got along without them! Really save time and effort. Also, a set of metric line wrenches will really help with those brake lines.

[@CTmoog]

Thanks John! I appreciate that! Yes it is! Thanks for the support! Stay tuned! =)

[@TomTom-up1kz]

Very good work 👍👍👏👏👏👏

[@MRrwmac]

Congratulations!

[@CTmoog]

THANK YOU!!! =) Stay tuned for more!

[@DerekSan_Arg]

Good job as always dude!

[@CTmoog]

Thanks Derek! I appreciate that! =) Stay tuned for more!

[@tysonthewolfe93]

57 years of Parts

[@CTmoog]

YES!!! Lots of grease and dirt to clean! THANK YOU!!! =) Stay tuned for more!

[@tysonthewolfe93]

@@CTmoog OK

[@mohamedbakry5042]

Hi CT👍 nice job😎😎 the mission is accomplish godwell

[@CTmoog]

YES! It was a mission for sure! THANK YOU!!! =) Stay tuned for more!

[@RenatoFerrante]

This time was clear that was "a lot of work", just keep doing your van will be very nice when you finish.

[@CTmoog]

Thanks Renato! THANK YOU!!! =) Stay tuned for more! Please Subscribe and click the bell!!!

[@thiagocorrea2714]

Show estou ansioso para ver o resultado final 👏👏

[@CTmoog]

THANK YOU!!! =) Stay tuned for more! Please Subscribe and click the bell!!!

[@geoffreyjones2000]

Sometimes I'm jealous of your find, sometimes I'm glad it's not me :) A blue finger is still better than a pudding finger... yup

[@CTmoog]

Sometimes I wish it was not me too! Most of the time I'm really having a blast. Yes, it could have been worse! =) Stay tuned for more!

[@rickwebster2243]

Hey CT. I was wondering what you are doing with the nuts, bolts and other parts? I used freezer bags that have the spot you can write on with a sharpie to put things in when I was working on a similar project. On projects like this, it's not unusual for a year or more to go by before you are ready to reassemble. So the better you are at carefully bagging things, the easier your job is when it comes time to reassemble. One other thing... don't feel the need to speed up the video too much. Only when you are doing something repetitive. We won't get bored.

[@CTmoog]

Thanks Rick! I appreciate that! Good tip! I need to but some bags! THANK YOU!!! =) Stay tuned for more!

[@hamiltoncorreamarinzeck2337]

Man! This spray is very powerful!

[@CTmoog]

YES ! Thank you! Stay tuned!!! Sparks are going to fly! =)

[@rockabillycatz]

Ct that took a lot of effort and hard work but you got the job done buddy,take care,

[@CTmoog]

Thanks John! I appreciate that! THANK YOU!!! =) Stay tuned for more!

[@bg5952]

Ну наконец-то какие-то работы начались а то полу часа распаковки новых запчастей. Наши парни за пол часа весь разобрали бы.

[@Victorinot]

Aka Dmitri is very happy you're back to doing repairs.

[@CTmoog]

THANK YOU!!! =) Stay tuned for more!

[@ronaldvanzelst7894]

you learn one step more each time to take everything apart. soon it will be even faster to assemble

[@CTmoog]

This is so true! You learn by doing! THANK YOU!!! =) Stay tuned for more!

[@hakanyasar8718]

Oppossite side turn ! I laughed a lot when watching = D

[@CTmoog]

I'm glad I can put a smile o your face! =) THANK YOU!!! =) Stay tuned for more!

[@sidneilefredopadaratz6048]

Just thinking on my own: I wish I could be there to help you with this hauling. In whole Brazil, the country where I've been living this vehicle is named Kombi (sounds like Kom Bee). I learned to love this VW Bus when I was in 2yo in 1976, my gramma had one of this with seats and windows for our family usage. It was a bicolor VW Bus, the top was white and its body was red. I get a little afraid of seeing you fixing all of this by yourself, take care TC. Safety over all, and keep on doing a nice job.

[@daniel88ful]

Excelentes tus vieras amigo saludos desde Argentina. Continúa haci👏👏👏😎

[@CTmoog]

THANK YOU!!! =) Stay tuned for more! Please Subscribe and click the bell!!!

[@andreirodrigo3081]

Muito bom! Sucesso no projeto!☺️👊

[@CTmoog]

Hello Andrei! Thank you so much! THANK YOU!!! =) Stay tuned for more!

[@yanicarmelo717]

Siguiendo esta restauración PULGAR ARRIBA por el esfuerzo saludos desde ELJAGUEL ARGENTINA

[@CVGaragem]

Boa tarde meu amigo....trabalho não para.....muito bem...firme e forte....

[@CTmoog]

Hello my friend! YES. Hard work pays off with reward! THANK YOU!!! =) Stay tuned for more!

[@chuckrieger782]

Fantastic work CT!!! You made it look easy....lol!!! Good thing to get the transmission out and clean everything up. It's amazing how far along it's coming!!!😁

[@CTmoog]

Thanks Charles! Yes, it needs a good cleaning and it really needed to come out to replace the mounts and shift coupler that were damaged. THANK YOU!!! =) Stay tuned for more!

[@warrengreenfield8865]

Great work captain, I took it back to bare metal under there, then red oxide and a coat of Por15 paint. I kept the reduction boxes but not driven it enough as yet to know whether it was a good thing or not? Loving this unfold, keep em coming 😉

[@CTmoog]

Thanks Warren! Good advice! I'll try them out soon and see how they work! THANK YOU!!! =) Stay tuned for more!

[@claudineiflorentino]

Mais um bom vídeo, paço a paço a velha Kombi ganha forma.

[@CTmoog]

Thanks Claudinei! YES!!! THANK YOU!!! =) Stay tuned for more!

[@scorpio7five]

Nice clear video. Nice placement of the camera as well.

[@CTmoog]

Thanks. I appricate that! THANK YOU!!! =) Stay tuned for more!

[@gustavoserrano2612]

nada fácil, fantastic work, saludos....,

[@CTmoog]

THANK YOU!!! =) Stay tuned for more!

[@emilianobarone2737]

Admiro tu esfuerzo. Es complicado trabajar solo .a mi me sucedió con la f100 cuando desmonte el motor diesel que poseía. FELICITACIONES saludos desde Argentina

[@CTmoog]

THANK YOU!!! Stay tuned for more! =)

[@azherkarbalai9484]

Wow you are a creative man in your business 👏🤗🇸🇾

[@CTmoog]

Thanks man! Stay tuned! =)

[@SteifWood]

@@CTmoog how u know its a man?

[@cesoloo]

Good job 😃

[@CTmoog]

THANK YOU!!! =) Stay tuned for more!

[@brenohdaugusto]

Show de bola,vai fika top essa comboza ;)

[@CTmoog]

THANK YOU!!! =) Stay tuned for more!

[@DavidJones-hl5om]

Keep up the good work on that rust-bucket it'll take time but it'll be like new when you get done

[@CTmoog]

Thanks David! I will! THANK YOU!!! =) Stay tuned for more!

[@staydetermined8512]

Now that the transmission and broken axle is out it's time for Wolfburg West to give you another present. Also I rememberd me immediately to my last comment in 10:44 xD

[@CTmoog]

HAHA! Yes, maybe! I'm going to need all kinds of stuff! THANK YOU!!! =) Stay tuned for more!

[@MacDougallIndustries]

That rust texture looks pretty sweet at 1080p ...

[@CTmoog]

Thanks man! I know! It really does! I might try 4k next time! =)

[@cicerofernandes4896]

Tenho uma Kombi minha paixão. Lindo de se ver recuperação desta relíquia.

[@CTmoog]

Me too! That's cool! THANK YOU!!! =) Stay tuned for more!

[@VWJawbreaker]

Swing axle transmission is definitely easier with two people.... wait till you have to put it back in lol IRS transmission are a lot easier for one person. Like the way you document everything, great attention to detail.

[@CTmoog]

Thanks man! I might need you to help me put it back in!!! =)

[@tomdale1313]

good stuff...be careful

[@CTmoog]

Thanks Tom! I'll try! THANK YOU!!! =) Stay tuned for more!

[@marcioteixeira7751]

Com muita deficuldade, mas valeu apena! Estou na torcida . (RJ Brasil)

[@CTmoog]

THANK YOU!!! =) Stay tuned for more!

[@mikedjames]

Progress! I would look at getting a brake line spanner when replacing it. The e-brake made for a genuine cliffhanger...

[@CTmoog]

Hey Mike! Good idea! Thanks for the tip! THANK YOU!!! =) Stay tuned for more!

[@adielpsilva3355]

Essa peça deu trabalho para retirar mais uma etapa concluída PARABÉNS 👍

[@CTmoog]

THANK YOU!!! =) Stay tuned for more!

[@cazmicrune2514]

Amazing! Thank you for your hard work. Please be careful about the work.

[@CTmoog]

THANK YOU!!! Stay tuned for more! =)

[@s.dxb.8466]

I like your job 👏😍

[@danielhelbig1116]

Plz make more videos of you restoring this beauty

[@CTmoog]

YES! Soon! THANK YOU!!! =) Stay tuned for more!

[@VWLifeVW]

it's really easy to strip out the threads in the Reduction boxes when you go to put them back in, i know it's a long ways away but becareful. when you line up the spring plates the put tension on the bolts and can miss-align and strip the RGBs. Also use anti-Seize on every bolt you put back on! :)

[@marcijunebug]

And torque everything to spec! Since SOMEBODY didn’t do that on my reduction boxes and well...that ends badly😂

[@CTmoog]

Good to know Matt! Thanks for your advice! =) I might just put regular axles on for now. Not sure yet.

[@CTmoog]

Oh sorry to hear that Marci! Yes I will...

[@marcijunebug]

@@CTmoog its all good now! nothing a little weld won't fix! lol

[@diamondknight1530]

Nice videos

[@hernanrivero1247]

Te sigo desde argentina exelente trabajo.

[@CTmoog]

THANK YOU!!! =) Stay tuned for more! Please Subscribe and click the bell!!!

[@shawnreynolds1010]

if you put a butane torch up to those bolts for a minute or two they should break alot easier but yea turning them in the right direction helps to

[@aliensprtcrico]

Good Job Men...

[@CTmoog]

THANK YOU!!!

[@teleosus1]

The only time I ever had problems with my VW type 2 transmissions was with the linkage. Bound to happen considering the distance from shift knob to gearbox.

[@CTmoog]

Good to know! THANK YOU!!! =) Stay tuned for more!

[@erykcz6031]

Great work ;) sometimes painful but worth of effort ;)

[@CTmoog]

YES, Lots of pain but you know what they say! "no pain no gain" THANK YOU!!! =) Stay tuned for more!

[@erikturner8687]

CT, I will say it again my friend....get a set of gearwrenches....you won’t regret it!

[@CTmoog]

Hey Erik! I will! This weekend! Thanks man! THANK YOU!!! =) Stay tuned for more!

[@VWLifeVW]

that's good plenty of PB Blaster :)

[@CTmoog]

YES it is!!! =) Thanks Matt!

[@marcijunebug]

39:50...the head wack! Ouch man I’ve done that so many times working on VW’s! Nicely done! 👍

[@marcijunebug]

When you do put that back...simple thing but replace that clutch nut with a butterfly wing nut version! Much easier to adjust and no special tools needed! (I’m sure you prob already knew that, but thought I’d mention)

[@CTmoog]

Yes, I need to get one of those for sure! I got your package!!! =) WOW!!!

[@calliope1]

marcijunebug I threw a butterfly wingnut on mine but didn’t change the clutch arm. Do you find that the clutch adjustment holds on the early arms using a wingnut?

[@calliope1]

Also a stahlwille uno 1024 does not really work with the early arm. You need a clutch pedal helper :)

[@calliope1]

May need to keep an eye out for a stahlwille 1415 if the wingnut setup doesn’t pan out ;)

[@surajpatra8918]

First viewer 😀 Was waiting since days Awesome sir 👍

[@CTmoog]

Nice! Thank you! =) More to come! Stay tuned!

[@kanjoracer4914]

Rocking the Tommy Boy shirt

[@CTmoog]

Oh yes! You know it! THANK YOU!!! =) Stay tuned for more!

Nice job.

[@CTmoog]

Thanks man! =)

@@CTmoog You're welcome. I'll stay tuned, okay?

[@andersonroberto5880]

Amo esse canal sou do brasil

[@CTmoog]

THANK YOU!!! =) Stay tuned for more!