GELCOAT REPAIR 101 -A to Z How To Repair Chipped Gelcoat and How to Repair Gelcoat Scratches

Gelcoat repair seems to be a mystery to many people. I challenge you to watch this video start to finish and not learn something you didn't know about gelcoat repair. I will share tips and techniques I have learned after working for decades as a professional boatbuilder and repairman. I will help you shorten the learning curve when it comes to getting pro level gelcoat repair results. This is an in-depth gelcoat repair video that should be watched in its entirety. Every step is important, so don't skip any if you want your repair job to turn out right! If you find this gelcoat repair video helpful, you may want to check out our channel for more boatbuilding and gelcoat related videos. If you want to see us make more videos like this, please remember to subscribe Like Comment and Share Thanks!
_______________________________________________________________________________________________
www.fiberglasswarehouse.com use code FISHBUMPTV for 15%off your 1st order.
patreon.com/FishBumpTv
_______________________________________________________________________________________________
Amazon Affiliate Links:
3M Half Face Reusable Respirator amzn.to/4bWsTX3
VOC Respirator Cartridge/Filter amzn.to/3wNYtpG
Fiberglass Warehouse Gel Coat no wax amzn.to/3PXfyUY
Wax Additive amzn.to/49DgwwO
Styrene Monomer amzn.to/3Q17OBj
Work Light amzn.to/3J1m3lB
Acetone - amzn.to/3tMTUes
Mechanic Creeper - amzn.to/3HglXFW
40-Inch 6 Caster Creeper amzn.to/3QsJasj
Air Compressor - amzn.to/3TSUrGe
Heavy duty drum fan - amzn.to/48K6aej
Gloves - amzn.to/41OpwNk
Dust Mask - amzn.to/4aPu7TC
3M Hookit Purple sand paper amzn.to/3Ha2mr6
Sand paper - amzn.to/3TRgygk
Shop Towels amzn.to/3vsRdiC
CRAFTSMAN Heat Gun, Electric amzn.to/3SYujak
Styrene Monomer amzn.to/3CAUNb6
PVA amzn.to/41NyDOj
Gravity Feed Cup Gun amzn.to/48IBmKV
3M Dry Guide Coat amzn.to/48qlRHM
Gelcoat without wax & Catalyst amzn.to/3RIhwsk
Gelcoat with wax & Catalyst amzn.to/3NUz5V2
Wax Additive amzn.to/47re7Ei
Spreader amzn.to/3vqk4nz
Paint brushes amzn.to/48K8aDv
Mixing Board amzn.to/48rhEUg
3M Sanding Block amzn.to/48OMeap
3M Sand paper 220 amzn.to/3Hc1gew
600 amzn.to/3SbB5Lp
3M Perfect-It Gelcoat Compound + Polish amzn.to/3IZr26k
DEWALT Buffer/Polisher, Variable Speed, Soft Start, 7-Inch/9-Inch amzn.to/3kYudmI
Safety Glasses amzn.to/3vSSqN7
Tape amzn.to/3QsGvij
Medium Cutting Pad amzn.to/48mL3is
As an Amazon Associate, I earn from qualifying purchases.
_______________________________________________________________________________________________
how to fix chipped gelcoat, how to restore gelcoat on fiberglass boat, prepping fiberglass for gelcoat, gelcoat or paint for boat, how to apply gelcoat to fiberglass, how to do fiberglass repair on a boat, how to repair fiberglass boat transom, gelcoat repair fixing gelcoat scratches gelcoat damage fiberglass damage fixing boat damage scratched gelcoat fixing my boat boat repair boatbuilding how to repair gelcoat how to build a boat fiberglass how to repair gelcoat dings and scratches re-gelcoating your boat gelcoat mixing gelcoat color match matching gelcoat boatbuilding how to build a boat gel coat boat paint scratch painting a boat boat paint bathtub repair jetski repair rv repair

[@FishBumpTV]

We have made Patreon ( www.patreon.com/FishBumpTv ) available for members who are interested in consultations on their projects. Thank you for your support!

[@CruisingTheCut]

As someone who has just bought a small, 48-year old fibreglass boat in need of substantial refurbishment, I cannot tell you how pleased I am to have found your channel (and I’ve been sifting through a lot of YT videos about fibreglass). Your videos are truly exceptional; tangible, useable information about the techniques and products used, and shown in detail. Thank you for not skimping or cutting things out in the edit, this is terrific information, and I’m much obliged. Cheers!

[@FishBumpTV]

Congratulations on your purchase! Twiggy looks like a great project boat with lots of potential! I took a few minutes to check out your channel this morning and found it to be entertaining, informative and relaxing. I am now a subscriber to Cruising The Cut and looking forward to watching more of your content! I am glad to help in any way I can, and plan on making a number of DIY gelcoat and fiberglass related videos over the next few months. If you have any suggestions for content or questions about repair and restoration work, please feel free to ask. Best of luck to You, and Safe travels!

[@PaPawsWorkShop]

Great source for info David, I’m looking forward to watching you bring back the beauty and life to Twiggy. I love his attention to the details of the repair and the reasoning behind each action.

[@jameswarren8164]

I'm here to stay on this channel, this format is spot on. Long and show every step missing nothing, full sends to pro level out the gate. I've watched thousands of yacht/boat repair videos, but they always leave you needing to fill in the pieces somewhere along the line, to the point you aren't confident you know everything you need to give it a go. Your videos crush it and make me want to give it a go now, awesome job dude!

[@FishBumpTV]

Wow, thanks! Your comment is much appreciated!

[@geneburnell5456]

I watched the video twice, and went to work. Excellent results. My neighbor can't even find the repaired area. I was also lucky that the Gelcoat for my BW is still made. Incredible results. Saved a thousand.

[@FishBumpTV]

That's fantastic! Glad the gelcoat repair video was helpful!

[@obvioussense9299]

My boss tought me wrong and I kept doing bad gelwork. Glad I found your video

[@FishBumpTV]

Glad to help, and best of luck with your future projects!

[@user-nf1wy5st8d]

I agree with the guy who said, " keep the videos long", more detail is better.

[@FishBumpTV]

Glad you are enjoying the videos!

[@budarmstrong7696]

I've watched a lot of YT videos and this is by far the most detailed. Great job

[@FishBumpTV]

Wow, Thanks so much! I appreciate you watching!

[@dennispanzik8450]

Nice. I don't usually mask off for all those small spots but process is the same. As an artist, airbrush etc. who transitioned in to body work and boat repair work you've been spot on.

[@FishBumpTV]

Thanks, I appreciate your comment!

[@deepskywishingwell2602]

This was the best gell coat video I have seen. This is exactly what I need to know as an avid boater. I have paid to have gell coat repair. Now I know what I’m paying for , and what I can do, if I have time. Thank you for the detailed explanation of this process. I hope you continue sharing your knowledge of your profession. It’s what we need to know as boaters , and to appreciate what “ glass guys “ do .

[@FishBumpTV]

Wow, thanks so much! Happy to share with the boating community, and I appreciate you watching and commenting!

[@davidschnider1297]

I appreciate you sharing your technique(s) and the steps ... based on your experience...... I feel like I CAN do this after watching you NOT skip steps and show ALL ( most of ) the time it has taken... thanks again .

[@FishBumpTV]

Glad you are enjoying the videos and I wish you the best of luck with your project!

[@billwarmack4252]

A very good teacher have learned a lot for being a 70 year-old , repairing a bass boat,, thanks

[@FishBumpTV]

Thanks, glad to help!

[@mikestevens2053]

I really appreciate the time and effort that went into this video. Shorter would require skipping detail, not really teaching the process. Thanks!

[@FishBumpTV]

Glad it was helpful! And I appreciate your comment!

[@jonnooney7102]

Another AA++ video from Fish Bump TV......well on your way to becoming the leading source for all things fiberglass repair on KZbin ! I wish you had been around when I started teaching myself to do fiberglass repair by trial and error because there was no one in my area to send people to. (I was only doing engine repair at the time). The quality of my work has greatly improved thanks to your videos !

[@FishBumpTV]

Wow,thank you Sir! Glad to help. I truly appreciate your support of the channel!

[@petehentges588]

I really like the full length videos. I feel like I am getting all the details to do the job correclty!

[@FishBumpTV]

Thanks,Glad you like them!

[@jafiberglass]

Hello Joe , this is Jaime from J A Fiberglass in Gilbert , AZ , it is amazing to see somebody repairing gel coat the same way as i do from the wood blocks to the masking around the repairs , i generally do add cabosil to thicken the gel coat on the first fill especially if its deep cause like you know time is money. i like to finish the repairs with 1200 paper , i find that works for me on white or light colored repairs , if its a black or dark repair i will work up to 2000 and i use the 3M Hi gloss white white with my rotary buffer , start out with a low setting and finish with a like a four setting on the buffer and that takes all the scratches out and gives it a super high close , wipe it down good and i apply my favorite wax , which is the Collinite marine paste wax. Great to see this video, your spot on and people will get good results if they follow your advice, good luck fishing.

[@FishBumpTV]

Hi Jaime, Glad you enjoyed the video! I agree that adding cabosil can be very helpful, especially with deeper scratches and dings. I have a couple more gelcoat repair videos on the channels where we show that process. The damage on this boat was on the edge between thickened and non thickened gel in my opinion. So I went with non thickened just to show some of the DIYers out there how it could still be done even if you didn't have any cabosil. But that is a good point! Sounds like we are on the same gel coat repair program overall. It is always good to hear from another professional, and get there feedback! I feel like there is always something to be learned from other craftsmen, and I try to have a open mind about different styles and techniques. I appreciate you watching, and your positive Comments! Please feel free to let me know if you have any suggestions for content on the channel, I would like to hear your thoughts! Thanks so much!

[@ronchamberlain-xk8ts]

Unbelievably helpful in many ways to obtain a professional result working with fibreglass repairs. Thanks for the video and your time.

[@FishBumpTV]

Wow, thanks so much! Glad you are enjoying the videos!

[@ante8210]

This is A to z how to repair gelcoat. Best video on KZbin

[@FishBumpTV]

Wow, thanks so much! I appreciate your support of the channel!

[@Louis-nd8sw]

Truly a professional. Thank you sir! My jaw dropped when you went from 1500 to 2000 grit, that’s when I knew you have your sh_t together and then some. I bought a fixer upper 21’ stingray 210 SS cuddy that is in process of a floor repl. It needs a stringer repl too. Your info is increadably helpful.

[@FishBumpTV]

Wow, thanks so much! Glad you enjoyed the video and best of luck with your project boat!

[@ropeman3916]

Thank you for passing on years of knowledge. Truly an expert.

[@FishBumpTV]

You are very welcome! Thank you so much for watching and commenting!

[@earlywhiskey1847]

What is crazy is I don’t have anything fiberglass and I watched the whole video. I learned a lot from it. What you do is high craftsmanship. Thanks.

[@FishBumpTV]

Haha, that's awesome! Thanks for watching!

[@juantwo322]

Finally! Someone that gives real detailed information on how to do these repairs 🎉.. Came across your channel in looking for some products to purchase for my boat 🛥️.. I like that U take your time in explaining things, & I don’t mind that the videos are longer because they are very informative.. Big shout out from Miami Florida 🏝️.. I look forward to seeing more videos from your channel, Thank U 👋🏻

[@FishBumpTV]

Wow, thanks for your comment!

[@jeffmolatore9234]

if you are just learning how t do fiber glassing this guy will save you years of learning by making mistakes. I wish he was around when I built my Roberts 25.

[@FishBumpTV]

Wow, thanks so much!

[@rosswiddison6699]

WOW I'm about to buy 23ft trailer sailer, needs some touch ups, you have given me the confidence that I can do a job like what you did. I do have patience. My first video of yours, I sure will be watching all the rest. thanks mate.

[@FishBumpTV]

Thanks, glad you enjoyed the video! Best of luck with your project, and welcome to the channel!

[@hardhead-cz3ro]

I'm with everybody else that have commented on here about how you give the absolute best details of any video that I have watched on trying do any kind of repair by far keep up the good work and please don't skimp

[@FishBumpTV]

Wow! Thanks you so much! I will try to keep the high detail, technical content rolling out for you guys! I appreciate you watching and commenting!

[@brandywineangler6748]

I appreciate the detail in this. Definitely better than the quicker overview videos out there.

[@FishBumpTV]

Great, glad you liked it! We wanted to make a legit a to z DIY style video. It is for the folks that are actually going to do a repair and want a step by step guide. Thanks for watching and commenting, it really helps the channel!

[@tommyvacarella1938]

I was very reluctant to trying a repair like this on my own, but after watching this video, I feel very confident that I can make this happen. Thank you!

[@FishBumpTV]

Thanks, glad to help!

[@DaveAdams308]

Excellent video series. Can't wait to watch more. I'm learning SO much. Thank you! 👍👍 And don't worry about the length of the videos. It has to be lengthy to be informative in great detail so please keep em coming.

[@FishBumpTV]

That's awesome, Glad you are finding the to be informative! We will keep the long form content rolling out for you guys. Thanks so much for watching and commenting, I truly appreciate it!

[@thats-no-moon]

Outstanding. You just won a new Patreon -- this will save me so much money when working on my sailboat.. Thanks from Germany!

[@FishBumpTV]

Awesome, thank you! Best of luck with your sailboat!

[@federiconieri5994]

Amazing content! Finally someone showing how it's properly done, without skipping passages or taking shortcuts. So much passion and attention for the details: really inspiring and helpful! 👏

[@FishBumpTV]

Wow, thanks so much!

[@geoffstein3896]

Awesome 👍👍 it's long but so worth it because you really explain well what you're doing. Really enjoy what you put out

[@FishBumpTV]

Wow, thanks so much! Glad the video was helpful!

[@rberglind]

I’ve done a lot of similar repairs myself and your level to details are spot on, in my opinion. Best video on this topic on the internet! - period! 👍👍

[@FishBumpTV]

Wow, thanks! That means a lot to me! I truly appreciate your support of the channel. I will try to keep useful videos rolling out for you guys!

[@Bill-mu4og]

I like your work! do it right the first time. well worth the extra effort

[@FishBumpTV]

Glad you agree! Thanks for watching and commenting!

[@keithwhited-zw9zv]

Just what I needed ….thank you for your commitment to the details!

[@FishBumpTV]

Glad it was helpful! I appreciate you watching and commenting!

[@user-wl3nh4fl7z]

I really enjoyed watching your video and the level of detail that you put into your work. My gelcoat repairs haven’t come out quite as nice as yours still a work in progress would you be able to review handling spider cracks and stress cracks top side and the best way to Repair those as well as gelcoat color matching?

[@FishBumpTV]

Glad you are enjoying the videos! I have had a LOT of practice in the gel coat and fiberglass world, and I am still learning new things about it. Like a lot of things It is something you will get better at every time you do it! I will do my best to do some color matching and stress crack work for you guys, I appreciate the suggestion!

[@martylasher539]

New to the channel. Thanks for putting all this work into making me a little smarter. I have a deep gouge in my boat and I'm working up my courage to tackle it. This is definitely helping.

[@FishBumpTV]

Welcome aboard! Glad to help!

[@alangood8190]

Very thorough and informative. Many thanks.

[@FishBumpTV]

Glad it was helpful!

[@goodoboytw]

First time watching a fiberglass repair. Holy crap I cant believe how much time and effort it takes for just a couple small nicks. Glad you have the patience for this kind of work. I would never make it in this kind of business as it is tedious work.. But it does look amazing.

[@FishBumpTV]

Haha, thanks! Yes, it is more to it than most realize. Glad you enjoyed the video!

[@seansadventures-flyingtrav7901]

Great tips!! Excellent advice..Thanks for taking the time to show how to do it right!

[@FishBumpTV]

Thank you so much, glad you enjoyed it!

[@michaelstavros8652]

Big thanks for an outstanding tuition. Im about to start repairing quite a few chips, scratches & cracks on my 38' catamaran & you've shown me the way.

[@FishBumpTV]

Glad you found the video to be helpful! I appreciate you watching

[@mohameddocrat4393]

Excellent video. I will be doing this on my canoe where the epoxy was worn down in the wind to the kevlar. I've done quite a bit of research and your channel is excellent, the best I have seen. Thanks.

[@FishBumpTV]

Wow, thanks so much for the kind words! Just remember that gelcoat can have curing or bonding issues sometimes when applied over epoxy. If the gelcoat doesn't work well, you might need to use a epoxy based primer coat and paint system. I will try to do a video on this subject soon. Thanks for watching, and best of luck with your project!

[@michaelwaters8749]

Love the long videos with professional levels of detail. Very nice job. Thanks

[@FishBumpTV]

Glad you like them, and thanks for watching!

[@dwayneroberts6616]

I needed this video. Thank you for showing the entire repair. I could watch and learn for hours please don't think the video was to long it was absolutely awesome! You are my Sensei!

[@FishBumpTV]

Wow, thanks for your comment!

[@scottsmolich4529]

Excellent tutorial! Your attention to detail is extremely helpful for a neophyte in gel coat repairs. Thank you!!

[@FishBumpTV]

Thanks so much, glad it was helpful!

[@mygearisbetterthanmygamevl9691]

I love that you went through the whole process. Thanks!

[@FishBumpTV]

You are so welcome!

[@johnpreihs9304]

I appreciate your camera man as well he does a great job of close ups of what your doing

[@FishBumpTV]

Thanks! I will be sure to tell him! I appreciate you watching and commenting

[@rope2hocks]

I’ve loved seeing every step you make. I won’t be doing any of it, but sure helps to know what the process done correctly looks like! Well done sir!

[@FishBumpTV]

Glad you enjoyed the vid! Thanks so much for the kind words!

[@rope2hocks]

Seriously, this vid had me thinking I could watch it 20 times & try a repair. Our 'mechanic' (who is no longer helping me) said he could fix some dent & scrapes on our 42 Californian. Ohhh my, did he make a mess. Globs of wrong color gelcoat in several places...do you have a how to fix other peoples bad jobs video?? Lol Signed, 'Desperate in Pensacola' Ha & Thanks Capt Joe

[@FishBumpTV]

@@rope2hocks I am so glad you enjoyed the video, and found it interesting! Sorry to hear about your gelcoat repair gone wrong! Your suggestion for a fixing a failed gelcoat repair is actually a very good idea. I will try to do something like that for you guys in the future. I appreciate you watching and commenting

[@rope2hocks]

If you need a "gel coat gone wrong" boat for a future vid, I'll be your Huckleberry...😂 😂😂

[@FishBumpTV]

@@rope2hocks Haha! Maybe so!

[@MexicoPescadoro]

Preach Fr. JOE! You're an absolute legend.

[@FishBumpTV]

Thank you brother!! I appreciate it!

[@johnkaminski-bh1im]

@@FishBumpTV how refreshing to listen to someone who knows his trade .excellent

[@TEXASHANDYMANSVCS]

GREAT VIDEO!

[@FishBumpTV]

Thanks! Glad you enjoyed it!

[@jonathanfarney957]

Thank you for this content. I have a little c-dory in need of some minor repairs. Your videos are really helping me get a handle on how to complete them myself.

[@FishBumpTV]

Glad to help, and best of luck with your project!

[@pumpkin971]

Been viewing your videos. Just so informative and super detailed. Luv your videos so much about repair and gel coating. I watched your videos numerous times to get confidence. Then purchased (approx: $800 since Qrt Spectrum Atrlantic Blue for $360) a bunch of materials and equipment to complete a DIY. Two months ago we had a minor stupid accident docking my Cobia 237 due to high wind and turbulent water. To keep it short, the above water line bow keel hit the upper edge of the concrete barrier. It ruptured the glass and gelcoat with a hole thru and bunch of port and starboard gouges and scratches. To sum it up.....ugly. Since the damages are above the water line, I believe you can consider it cosmetic but still ugly. Thank so much for your videos, I was able to fix everything and able to do trial an error (perhaps doing it close to 10 times) lots of practice for over a month due to weather (rain and wind conditions). Results: color matching not perfect, but hard to notice. I was able to feather and gel coating came out really nice. I still think it is achievable for my DIY to make it close to a professional job, thank you so again for your mentoring. You are the best!

[@FishBumpTV]

Thanks so much! Sounds like the damage to your boat was just the kind of thing these videos are intended for. We all have those kind of things happen to us from time to time, it is just part of boat ownership. It sure feels good to know how to repair that kind of stuff when it happens! Sounds like you stuck with it, and had good results, Congrats! Glad the videos helped! I truly appreciate you watching and commenting!

[@jeffoneill3429]

I just want to say thank you, and throw some much deserved compliments at you guys (found you recently). The filming is bang on, the host is absolutely a fantastic natural presenter, and I really appreciate the highlighting of key products and techniques. It’s plain to see you guys are in the flow state and nailing it out of the park.

[@FishBumpTV]

Wow, thanks so much for the kind words! We will keep working at putting out quality content for you guys!

[@mattebigge]

Your detailed videos is the best! 👌

[@FishBumpTV]

Thanks so much, glad to help!

[@UJC1977]

Thank you for taking a well-paced, thorough, and methodical tutorial. Your presence, approach, and voice are very effective for camera facing. I am in the beginning stages of restoring my heavy oxidized bass boat. Like the others, I have done and still researching on YT a lot. In doing a small area as a test, I wasn't happy with the results of the product I was using. Then I found Starke Level R and Starke's other products, and the difference was night and day. As per your video request to offer suggestions, you might want to give Level R and its complementary products a look. Great job and I have happily subscribed.

[@FishBumpTV]

Glad the videos are helpful, and I will check out the stark products. Thanks for the suggestion!

[@dougstearns6746]

Captain Joe, You did a great job of going through the process. When you brought out the Collinite I knew you were the real deal. Thank you

[@FishBumpTV]

Haha, thanks! Yep, it's the good stuff! I appreciate the comment

[@HappysDaysailer]

Thank you for the educational video. This was great. I learned so much. You do an excellent job of delivering knowledge. You don’t say ummm or aaa . Great job. Easy to watch.

[@FishBumpTV]

Glad it was helpful, and thanks for the compliment!

[@rogerhodges7656]

A housepainter worked for me, prior work experiences was as a painter for Falcon Jets. He was a wizard with a razor blade. He could clean up defects in painted cabinets and trim like no ne I have ever seen.

[@FishBumpTV]

Razor blades can be great for paint and gelcoat touch up! Thanks for watching and commenting!

[@chrisbernacki1012]

Yup this is a great video. I am now confident I can fix a couple of dings in my gelcoat. Going into detail is really helpful. Thanks

[@FishBumpTV]

Awesome, glad to help!

[@ahchurchview7378]

Superb. Thanks so much. Best wishes from the UK for the best video on repairs.

[@FishBumpTV]

Wow, thanks so much! We appreciate you watching all the way from the UK 🇬🇧

[@BAMBOU-FR]

👌👍So much time and products to make a good job ! Now I understand better the cost of having a small repair done by a professional, no matter how small. Thank you for opening our eyes.

[@FishBumpTV]

Glad you found the video to be interesting! Thanks for watching and commenting!

[@michaelkenneally7551]

Your unreal don’t ever stop great work and info🔥🔥 🇮🇪

[@FishBumpTV]

Thank you so much, glad you are enjoying the videos!

[@ebenwiid7140]

Great video, very informative! Just remember that if you flip your gloves inside out for re use, the oils from your hand is on the outside of your gloves.

[@FishBumpTV]

Thanks! Yes, I agree completely. In the video I had to take a new glove off to work with some masking tape for just a moment. The glove turned inside out as I took it off my hand. I turned the inside of the glove back to the inside rather than throw it away. I would never recommend wearing the glove in reverse after using it, that would defeat all of the wipe down and prep work we did to the surface. I hope this clarifies what I was suggesting. I appreciate you watching and commenting

[@Duartechamps]

Great great channel. You rock communicating!!

[@FishBumpTV]

Thanks so much!

[@johnsansome3435]

Thanks learned a lot 😁👍

[@FishBumpTV]

Glad to help

[@johnsansome3435]

I really love your 50 minute plus videos! I see how much you love doing what you are doing 😁 awesome

[@FishBumpTV]

@@johnsansome3435 Thanks!

[@todddesormeaux428]

Good job and a very good detailed video!

[@FishBumpTV]

Glad you enjoyed it and thanks for watching!

[@TheObSeRvErTheObSeRv]

MASTER CRAFTMAN....FANTASTIC JOB..JOE. Hi from Melbourne Australia.;-)

[@FishBumpTV]

Wow, thanks!

[@carldymond110]

great video! I,m doing some gel coat repair on a friends boat . this will help alot. thanks!

[@FishBumpTV]

Glad it helped, and thanks for watching!

[@nathankindig3013]

Wow! Great video and information. I just found your channel. US vet living in Australia and on our new to us leopard 46 sailboat that needs a lot of telcos love. Y’all did a great job explaining the process on this video 🤙🤙

[@FishBumpTV]

Welcome to the channel! And thanks for watching all the way from Australia 🇦🇺 We have a lot more DIY type videos planned for the channel, so stay tuned.

[@jamesbrown1501]

Finding your posts very useful indeed..keep them coming!

[@FishBumpTV]

Thanks, will do!

[@1267josh]

Great video man. I’m not sure if you have a video on this topic or not, but I know I would love to see an how to in depth video for how to color match gelcoat with tint.

[@FishBumpTV]

Thanks so much! That is a great suggestion!

[@Luca-is7tu]

Love the videos: so much experience and wisdom packed into each one, and they are easy to understand! Moving onto a liveaboard next a week and I'll be using your content to help catch up on some "deferred maintenance."

[@FishBumpTV]

Wow, thanks so much for the comment! Best of luck with your live aboard project!

[@kmt9065]

capt Joe you make really good instructional videos, the material is very detailed and comprehensive- just what I was looking for! I don't think I've seen better ones on YT. It's good to watch, thanks! Greetings from Poland!

[@FishBumpTV]

Thanks so much! I am glad you found the videos to be helpful! We have friends from Poland, Would love to visit some day!

[@paulradford4100]

If you're going to do a job, it's better to do it right - 100% true, my friend.. And you can't beat doing things by hand a machine removes you from the work, where by hand really allows you to "feel" your way. I disagree that if it's just a repair to a functional thing you may leave it there - you'll always be seeing that repair - all comes back to doing it right. Feathering is absolutely vital, producing invisible repairs.. Putting 2 halves of a canoe together by drilling and stitching, yeah I drill with a machine. But once the job is done and the inside fibreglassed and gelled, stitches removed, I would use a rose on a drill to get that 45° feather - I would still go in and feather further. All sanding and polishing by hand, the machine only returning for the last polish and wax. Great job and great video.. Job done..

[@paulradford4100]

Also the blue tape is magic stuff.. I used to skimp out on cheap masking tape and all the issues along with it, but blue tape? I'd never go back..

[@FishBumpTV]

Thanks for the comment! Much appreciated

[@alexandredamiens4523]

Very clear and interesting.

[@FishBumpTV]

Glad you enjoyed it!

[@Rhyseh1]

Brilliant guide! As someone who's currently trying to do some gelcoat repairs this is super helpful!

[@FishBumpTV]

Glad it was helpful! Best of luck with your project.

[@Zanderkiller1402]

Perfekt Job!👍

[@FishBumpTV]

Much appreciated! Thanks for watching!

[@papawhelp]

I really love your videos...

[@FishBumpTV]

Glad you are enjoying the videos and thanks for watching!

[@stonybrookmarineservice8907]

great video, I usually add cabosil to thicken the gel coat and do my fairing work then spray the final gelcoat, I like your tape method to get the gelcoat higher than the repair and smooth, I'm going to try it on my next repair. keep these technical videos coming they are great.

[@FishBumpTV]

Thanks! The way you are doing your repairs is a solid method as well. I wanted to show different ways it can be done and still get a quality repair. Also thought some of the people interested might not have a spray gun. Glad you liked the taping method, it is a good option to have in your bag of tricks. Maybe I will do a repair with cabosil and a spray gun in a future video. Thanks for watching and commenting! It really helps the channel

[@dominiciadicicco8935]

Thank you for all that you do. It was extremely helpful, and that means a lot in today's world.

[@FishBumpTV]

You are so welcome! Thanks for the nice comment!

[@kenwolf1056]

Great job! I like it that you took the time to do the job right. Thank you!

[@FishBumpTV]

Glad it was helpful! Thanks for watching and commenting!

[@user-rg2jk6bd3r]

Super video!! Always fantastic and good learning with your tube videos. Greetings from sweden and keep upp the super good work!

[@FishBumpTV]

Awesome, thank you! Glad You like them!

[@debrisbox]

Awesome! That guide coat is amazing stuff!! Thanks for the video.

[@FishBumpTV]

Glad you liked it! Thanks so much for watching and commenting!

[@rogergoldstone5332]

Great video!

[@FishBumpTV]

Thanks! I appreciate you watching!

[@ante8210]

Amazing video

[@FishBumpTV]

THANKS!

[@kirkjohnston8929]

Great video and very informative. Can you make a video about a damaged chine and how you sand and shape it?

[@FishBumpTV]

Thanks, glad you are enjoying the videos! Sure, I am working on some new gelcoat color matching and repair videos right now for you guys. Thanks for your suggestion!

[@frankphair4675]

Nice job good too watch I learned a lot

[@FishBumpTV]

Glad you enjoyed it!

[@stevendunn5989]

Great video learned more tHan 6 other vids

[@FishBumpTV]

Great to hear! Thanks for watching

[@will_j]

Thanks for doing these videos, I learned a lot! Going to be touching up some gelcoat on my boat (in the UK) this year.

[@FishBumpTV]

Thanks for watching all the way from the UK 🇬🇧!

[@kevinmorrow1944]

Great work on the detail overview!!!

[@FishBumpTV]

Much appreciated! Thanks for watching!

[@ttwil9810]

excellent video for those who have never worked in the fiberglass field, as when I have trained people everyone has their own way of doing repairs so view a few options for repairs and wet sanding. My last build was a 43 foot fathom yacht.

[@FishBumpTV]

Thanks so much, I appreciate you watching!

[@FishBumpTV]

Thanks so much, I appreciate you watching!

[@ttwil9810]

it's been a while since I have glassed looking back into it for some fiberglass bows & limbs etc. will be refreshing memory, and want to play with both vacuum bag and infusion again for these builds

[@michaelmello9510]

Great job came out beautiful 🤙

[@FishBumpTV]

Thanks so much!

[@milt2170]

Great job!! Thank you

[@FishBumpTV]

Glad it was helpful!

[@stephenharper3922]

Good job. Appreciate ya.

[@FishBumpTV]

Thank you!

[@dougk1780]

Such a great video! Thank you for all the technical and detailed info. I'll be tackling a gelcoat repair on my boat in the next couple weeks and feel pretty confident after watching several of your videos!

[@FishBumpTV]

Thanks so much, glad to help!

[@juanpabloramirez6565]

Quality work

[@FishBumpTV]

Thanks so much!

[@peterceccato3580]

Great video, On the coosa impact test, it looked like the coosa board was flexing and the foam on the floor and prevented it from deflecting to a point of fail.😊

[@FishBumpTV]

Yep, I think we might do a second round of tests with some fiberglass added, and more ground clearance, so stay tuned!

[@hitchysfordtutorials341]

Thank you, great video and the way instruction content should be. You have inspired me to attempt a small repair on my pride and joy.

[@FishBumpTV]

Glad it helped, and best of luck with your project!

[@charlescamen5225]

Great work. Thanks for sharing.

[@FishBumpTV]

Thanks for watching, and commenting!

[@tonygravley1311]

I am beyond impressed with your instruction! Thank you

[@FishBumpTV]

Wow, thanks! Glad to help!

[@chrisjohnson1002]

Super vids! Gr8 step by step instructions. Keep up the good vids!!

[@FishBumpTV]

Thanks so much! I appreciate you watching and commenting!

[@tamaravolovik9423]

Great Job, Rich

[@FishBumpTV]

Thanks! I appreciate you watching