Good information I prefer the E track and straps over the tires myself for securement. Thanks for putting it out there that if you need to back on you have the wrong trailer so many people have the wrong trailers round me that it's scary to watch them go down the road. One other tip I'd like to share is don't use $5.00 hobo freight straps to secure your $30K units people spend a couple bucks on good straps !!
@Dusdaddy10 ай бұрын
Great method! I'm the same, I always attach to the tires. I use lasso straps over the top of the tires myself. Sometimes the wheels are just too damn to muddy to push a strap through....lol
@TeeRich_28 күн бұрын
Got bless you 💪🏾😎
@FishersOffRoad27 күн бұрын
Thank you my friend. 👍🏼
@denniskuenze65910 ай бұрын
Good tips Brian!
@rickdavid17954 ай бұрын
Good video Thanks
@FishersOffRoad4 ай бұрын
You bet, thanks for watching!
@georgefarr3478Ай бұрын
I like your way if you dont own shock strap tie downs
@edmarrs671610 ай бұрын
Hey Brian, great info. Question on the diamondback cover. Do you ever use it to haul a sxs, and if so, how do they ride up there?
@FishersOffRoad10 ай бұрын
I have used their SXS DB Cover before. I hauled a two seat General and it did great. I would say it depends on your truck, I had a RAM 3500 dually and never even noticed it was up there. I would say a 250 or 350 would be good to haul a SXS on the DB cover. Check this video out: Utilizing our Diamondback SXS Hauler on the Ram 3500 Dually kzbin.info/www/bejne/l2XCgnmcoNFppZY
@edmarrs671610 ай бұрын
Thanks!
@cavscout4310 ай бұрын
I hauled a RZR 900 with mine. It worked well, til I did a long arm kit and taller tires. At that point, the front tires against the headache rack left the rear tires sticking 3-4" off the back of a full sized 8' box. You'll probably want extensions for hauling a SXS on a deck, even with a long bed. You'll need the center support as well, the shims will not hold the weight and the sag will prevent the tailgate from opening or closing.
@edmarrs67167 ай бұрын
Hey cavscout43, thanks for the feedback.
@SPACE-IS-FAKE-7778 ай бұрын
What’s the Wheel and Tire setup on the X2?
@FishersOffRoad8 ай бұрын
I’m running a Sedona Sano Beadlock 14” 5+2 offset wheel (I prefer a 6+1 offset) with a Sedona Ridge Saw 3X10X14. The tires do rub a little when making tight turns.
@SPACE-IS-FAKE-7778 ай бұрын
There’s no way to run a 30 inch tire on the stock wheels?
@FishersOffRoad8 ай бұрын
@@SPACE-IS-FAKE-777yes you can, just make sure the tire is a 14” wheel size. 30X10X14 would work.
@johnc740610 ай бұрын
I can't imagine enough wind loaded backwards to rip off the windshield, roof, and seats. Hurricane force maybe but highway speed, come on.
@FishersOffRoad10 ай бұрын
That’s why I do these videos, to educate people.
@mopesrus726610 ай бұрын
I've seen it happen.
@MarvinCavanaugh-g6h2 ай бұрын
i can see your tires are bigger then stock, can you tell me what size they are and if there bigger do they rub. id like to go 30x10x14
@FishersOffRoad2 ай бұрын
My tires are Sedona Ridge Saw's and they are 30X10X14, they do rub a little when the steering is at full turn left and right. Not enough to be annoying.
@adampecore69175 ай бұрын
Evening, I watched your video on how people store extra fuel on their atv/wheeler. My son’s atv doesn’t have a ton of distance per tank. I’m fairly new to atv’ing so I wanted to reach out. I know the brand Rotopak, but I saw Amazon sells one one black, which honestly I like better, but I’m wondering if you can mount these in their sides. Any help would be appreciated. Thank you
@FishersOffRoad5 ай бұрын
Yes you can mount them on their side, they will not leak. Thanks for watching and feel free to hit me up with any other questions.
@adampecore69175 ай бұрын
@@FishersOffRoad Appreciate it! Thank you!
@michaelelam29974 күн бұрын
Very useful info delivered well. Thank you!
@FishersOffRoad4 күн бұрын
Thank you my friend, and thanks for watching! 👍🏼
@SPACE-IS-FAKE-7778 ай бұрын
I’ve used the wheel chocks and over tire straps for years. Synching the wheels down is the only way to go.
@craigsager966014 күн бұрын
Thank you for your video just bought a aluminum trailer and was looking at bolting down e track but didnt want all those holes in the floor of it. i like the way you did yours and you just saved me a bunch of time and money. I do have a question of should i leave the side x side in park or neutral ?
@FishersOffRoad14 күн бұрын
You can let it in neutral when you strap it down like this, it won’t go anywhere and you won’t have any strain on the tranny. Thanks for watching my friend.
@craigsager966014 күн бұрын
Sounds good another thing on my new trailer is that the front anchor spots are directly in line with my front wheels but the rear ones are off in the corners so the is a angle. Won't the front want to jimmy from one side or another without a angle on the straps? Thanks for your time .
@FishersOffRoad14 күн бұрын
If you make both sides in the front tight it shouldn’t shift at all. I would check the straps and possibly tighten a little more after driving for an hour or two.
@G-Man-kc2nm10 ай бұрын
Looks much easier than the track system Brian. I also noticed the locks on the hooks, that’s a good system. Thanks my friend.
@oldmanSturzl10 ай бұрын
Wow, it's hard to believe there are people out there that can't figure out the rachet on a ratchet stap. And I thought I was nieve for not knowing where my tie down points were on my machine.
@FishersOffRoad10 ай бұрын
I have a ratchet strap tips & tricks video getting ready to hit 1M views. It must be a popular search on YT. kzbin.info/www/bejne/gISWfKyHmtOErtEsi=9G-P2yx1eiKjpHVu
@cavscout4310 ай бұрын
I can't imagine having ratchet straps and "being scared" to let the strap out of the ratchet because you can't figure out (???) how to put it back
@AaronsAnglingAdventures16 күн бұрын
What straps are those?
@FishersOffRoad16 күн бұрын
They’re from @DiamondBackCovers diamondbackcovers.com/products/ratchet-tie-downs
@lloydhovelmann471910 ай бұрын
Great information thanks it just great to see how different ideas make it safe to trailer SxS or Atvs.
@soonermike410 ай бұрын
I use this method to tie down my X3. I also use a Cordura wear sleeve around my strap that I slide thru the wheel to protect it from any sharp edges.
@FishersOffRoad10 ай бұрын
Good idea. 👍🏼
@cavscout4310 ай бұрын
I'd imagine longer term having your straps against a metal 90 degree angle from the wheel would be terrible for their longevity. If you're not protecting them with a sleeve, you really need to be using proper "lasso" car tire straps that wrap around
@jhern71cubs5 ай бұрын
Great video thanks for the tips!! What brand are the straps? I really like that the hooks have the retaining clip on them TIA
@FishersOffRoad5 ай бұрын
Thank you! Those straps are from DiamondBack truck covers. diamondbackcovers.com/products/ratchet-loop-straps
@ralphjr700010 ай бұрын
Thank you very much for this video, I was doing it wrong and hooking up my wolverine exactly how you explained not to. I wonder why the guys at the Yamaha shop never told me this when I was unloading for service. I've had problems with my straps coming lose and new it was the machine bouncing that was causing it but didn't know how to fix it. I really appreciate you taking the time to show the proper way to strap down my UTV to a trailer,you definitely saved me money on my truck insurance from a lose strap flying off to who knows where! 👍👍✌️
@FishersOffRoad10 ай бұрын
Glad I could help you out, thank you for watching and for your feedback! 👍🏼
@michaelschecher17837 ай бұрын
I hauled 2 ATVs on a snowmobile trailer for several hours using this tie down method. Worked like a charm. Now I feel more confident hauling my ATV’s. Thanks for the video.
@FishersOffRoad7 ай бұрын
You bet, thanks for watching. 👍🏼
@davidmorad4405Ай бұрын
Great video! Oddly enough, the Can-Am dealership I bought my Defender from used nothing but the winch cable to attach it to the trailer when they delivered it to me.🤷♂️
@FishersOffRoadАй бұрын
Oh man, the absolute worst thing you can do! 🤦🏼♂️
@highperformancebassboats9 ай бұрын
Eggggggggggggggggggggggggggggggggggggggggggggggggggggggggslent info. Thanx for sharing. You Rock!
@FishersOffRoad9 ай бұрын
Thank you for watching!
@timalmich196410 ай бұрын
I use to use the rubber shock straps on mine. I now have a quad now and it rides in the back of my truck with straps.
@GeorgeVollmer-l1e2 ай бұрын
Great video just got a general and now I know how to tie it down thanks
@CarlosRamos-dj5vwАй бұрын
Thank you just bought an expensive Can-Am and have never strapped it on a trailer. I appreciate the video and the educational lessons.
@FishersOffRoadАй бұрын
You bet, congrats on your new Can-am! 👍🏼
@WVbilly10 ай бұрын
Great job! Good information for the newbies! Nice Wolverine!
@FishersOffRoad10 ай бұрын
Thank you! 👍🏼
@rustyraven494 ай бұрын
Great video. I have been using the Louisiana guard dog and trailer dog for the last 10 years to secure my units in the bed of my truck and on my trailer with zero problems. This to me is the best and easiest way to secure a atv/utv. Just my 2 cents.
@FishersOffRoad4 ай бұрын
Thanks for watching. 👍🏼
@jimronchetto85924 ай бұрын
I just bought a new Mule Pro FXT a couple months ago and want to protect my investment. I have watched a bunch of videos on tying down a UTV. This by far is the best. Thanks for posting it!
@FishersOffRoad4 ай бұрын
Yes sir, happy to help and congrats on your new Mule PRO FXT, that’s a great machine!
@truehope2875 ай бұрын
Do you have tips for mounting a handheld HAM radio on a SXS?
@FishersOffRoad4 ай бұрын
Sorry, I don’t.
@rcclassiccrawlers436810 ай бұрын
I have the E-Trac system. I absolutely love that setup cause I know for a fact it’s not going anywhere and there isn’t any strain on any steering components. Plus the excess strap is folded and slipped between the tire and the strap then tighten the strap. It’ll never come out. Your way is fine for you and that’s all that matters.
@FishersOffRoad10 ай бұрын
👍🏼
@lilredi_1810 ай бұрын
Stayed in that exact cabin in Gilbert VW right next to the Speedway! Absolutely beautiful cabin! Very close to trail heads! Go taste test the moonshine up on the hill! Well worth it after a long day of riding rock house!
@FishersOffRoad10 ай бұрын
It was a nice cabin! We went up there a few years ago but not this trip.
@jamestribol143410 ай бұрын
I have a Polaris ute...they suggested I put the machine in Neutral while I tow. Or can I put it in Park?
@FishersOffRoad10 ай бұрын
Great question! I personally like to put my machine in H gear and put the E Brake on, if the machine has park I let it in park. Not saying that’s the 100% correct way to do it, I strap my units down really good so I don’t get any back & forth movement. I’ve never had any problems with any of our machines hauling them that way.
@GeorgeVollmer-l1e2 ай бұрын
Great video just got a general and now I know how to tie it down thanks
@FishersOffRoad2 ай бұрын
You bet, thanks for watching!
@victorjuarez-q3k10 ай бұрын
This is a great video. Very informative and to the point! Thanks for sharing.
@FishersOffRoad10 ай бұрын
Thank you for watching and for your feedback! 👍🏼
@darrengreen870110 ай бұрын
Good video and information. I am very interested to hear your thoughts and review of the wolverine x2 1000.
@FishersOffRoad10 ай бұрын
I’m almost done putting the X2 1000 video together. Thanks for watching!
@darrengreen870110 ай бұрын
@@FishersOffRoad I can't wait to see it. Thanks for your quick reply.
3 ай бұрын
Thank you
@bobbyratliff334910 ай бұрын
Say this louder for the people in the back lord god some of the stuff I see driving down the interstate scares the crap out of me. I tried to explain just how you strap yours and the people who believe that wrapping a strap around your wheel will break the wheel is unbelievable.
@FishersOffRoad10 ай бұрын
Yes sir, I hear you loud & clear! The ones that are set on their ways and say it’s wrong are the ones that need the info the most! Just like using a winch to secure an ATV or SXS, every time I went to the WARN headquarters they would show me hundreds of gears that were destroyed by the winch being used to tie down a unit or being used to drag someone out of a mud hole.
@bobbyratliff334910 ай бұрын
@@FishersOffRoad I was guilty of the winch thing but no to strap it down the pulling part I learned that lesson really fast when I was a kid grandpa was not happy.
@FishersOffRoad10 ай бұрын
@bobbyratliff3349 grandpa’s know best, LOL
@kractass7 ай бұрын
Good info man. Hey do you have a link for that windshield? I'm gonna need one.
@FishersOffRoad7 ай бұрын
Here ya go brother, this is a super high quality windshield for sure! yamaha-motor.com/p/wolverine-glass-windshield-with-wiper-and-washer-system
@kractass7 ай бұрын
@@FishersOffRoad Cheers man!!
@thundermountainatv10 ай бұрын
first time in a long time you have appeared ain my feed , good to see you again
@FishersOffRoad10 ай бұрын
Thank you for watching and reaching out, happy to have you back my friend! 👍🏼
@corycodner613010 ай бұрын
Do you have 30 '' tires on that x2 1000??
@FishersOffRoad10 ай бұрын
Yes I do, they rub a little in the front at full turn.
@holdennestor68 ай бұрын
Would you recommend these straps
@FishersOffRoad8 ай бұрын
The @DiamondBackCovers straps? Yes definitely, I’ve been using them for years.
@Luis-j1z1w6 ай бұрын
Thanks man, this was a really good video!
@FishersOffRoad6 ай бұрын
You bet, thanks for watching!
@DanielYoung-gy6zb5 ай бұрын
What size tire and wheel do you have on the machine in this video?
@FishersOffRoad5 ай бұрын
30X10X14 Sedona Ridge Saws and 14” Sedona Sano beadlocks, +38MM or 6+1 offset.
@DanielYoung-gy6zb5 ай бұрын
Love the look of that machine.. I just bought an rpec x2 1000
@timothyduggan355910 ай бұрын
When are you gonna do a video on the new x2 1000?
@G-Man-kc2nm10 ай бұрын
Great question! I’ll vote for that!
@FishersOffRoad10 ай бұрын
I was working on the edit yesterday, I need a couple more elements to finish it up. But it’s very close to being done. 👍🏼
@FishersOffRoad10 ай бұрын
FYI, we’re launching our own Off-Road Family community & App beginning of January. Miss & I also started Live Talk Tuesday again on FB & YT until we get our community launched. 👍🏼
@G-Man-kc2nm10 ай бұрын
@@FishersOffRoad I’ll be your first guest!….
@HARPOZ10 ай бұрын
Great information Brian! So glad to see you still sharing tips and tricks to this awesome off road community. Be sure to tell the family we say hello. Jesse R.
@jakespeicher44449 ай бұрын
Any riding video's coming miss those videos
@FishersOffRoad9 ай бұрын
We’ll have some coming in 2024. 👍🏼
@Darrells..10 ай бұрын
Great advice 👍👍
@scotschmidt66838 ай бұрын
What tires do you have on your ride?
@FishersOffRoad8 ай бұрын
For this ride, I had Sedona Ridge Saw 30 X 10 X 14’s.
@kennywisemansr.23235 ай бұрын
Very informative video....
@FishersOffRoad5 ай бұрын
Thank you and thanks for watching.
@patmcguire68674 ай бұрын
Helpful thanks
@FishersOffRoad4 ай бұрын
You bet, thanks for watching.
@MikeB-rd5ci9 ай бұрын
Good information, thank you!
@FishersOffRoad9 ай бұрын
You bet, thanks for watching!
@123logmeon5 ай бұрын
Except you’re putting your strap against a tear point in that wheeler rim..eventually your wheeler will tear through that strap unless you use actual straps with protective cover over strap, but strapping wheels are great method…
@FishersOffRoad5 ай бұрын
Not these wheels, cheap wheels with sharp edges yes.
@johnkoko6 ай бұрын
Great vid. What are the specs of your tire and wheel setup?
@FishersOffRoad6 ай бұрын
I’m running 14” Sedona Sano beadlocks with a +38MM or AKA 6+1 off set. Tires are 30X10X14 Sedona Ridge Saws.
@johnkoko4 ай бұрын
@@FishersOffRoad Stock clutching? This setup looks great and if it holds up for you, it will hold up for me.
@FishersOffRoad4 ай бұрын
@johnkoko yes, stock clutching. 👍🏼
@johnkoko3 ай бұрын
@@FishersOffRoad thank you for answering all my questions. One last question. Do you know how close this is to stock width? I really don't want to go wider. I have no idea what the stock wheel offset is. When I look at Sedona's website they only should these wheels in a +10 for the 4x110 bolt pattern. Thanks again!
@sullyone837310 ай бұрын
Good to see some content from you!
@FishersOffRoad10 ай бұрын
Thank you, we’ve been busy working on our own community & App, launch date is beginning of January. 👍🏼
@sullyone837310 ай бұрын
@@FishersOffRoad looking forward to it.
@fozzybear91146 ай бұрын
Straping this way cuts the strap. Everytime
@FishersOffRoad6 ай бұрын
I guess it depends on how you're strapping, what wheels you have and the quality of your straps. I've been doing it like this for years with zero issues.
@dionbrandt617610 ай бұрын
Still like to load backwards I have had rock chips in the windshield in the past - rear glass is less expensive than a curved glass windshield.
@FishersOffRoad10 ай бұрын
The point is the accidents it causes. I was on a comity with insurance companies and trailer manufacturers a couple years ago and this was a major topic of discussion on how to educate people on trailering the correct way. Totally up to you how you haul your machine.
@SPACE-IS-FAKE-7778 ай бұрын
I’m Leary of glass period. It’s too easy to crack on the trails and I’m sure full coverage isn’t going to constantly replace a $1300 windshield. I love the look and ease of cleaning tho
@smsediting69854 ай бұрын
I use this system with a slight modification. I put axle straps with rash guards through the wheels and do a crisscross method with the straps. The front wheel gets locked down to the rear eye hook on the trailer same side and the rear wheels get locked down to the front eye hook on the trailer same side. We did a similar method with 3-wheelers and quads except we had to go around the axles. I have seen a few car tow companies use both this method in the video and my method. I have seen the same driver use both methods. But this is by far the best and safest way.
@CharlesMatar10 ай бұрын
Hi Brian ! Great tips thanks! What’s your thoughts on the proper gear to use when towing and or e brake on or off in regards to your machine on the trailer. Thanks again for all your tips over the years. 😎😎
@FishersOffRoad10 ай бұрын
Great question! I personally like to put my machine in H gear and put the E Brake on, if the machine has park I let it in park. Not saying that’s the 100% correct way to do it, I strap my units down really good so I don’t get any back & forth movement. I’ve never had any problems with any of our machines hauling them that way.