DIY Solar PowerStation ( CHEAPER than buying one )

[@user-McGiver]

comedy aside, you my friend give a good explanation of how things work so we can understand too... not many people bother to do that, they just describe their own creations as it's ''magic''... we need more of your content... thank you for what you're doing...

[@FishinNStuff]

@user-McGiver thank you very much . I just try and explain it in common terms , the same way I'd want it explained too me . I appreciate you watching and for the awesome feedback

[@gator2k83]

Battery hookup has a 30ah 384 WH that's smaller right now for $44 before cpupon.... just saying, I just built a similar setup with 5 of those for a total of 1900wh inside of the Apache 3800

[@davidbarbour2295]

P

[@macjoel2009]

Just fyi the 2 pin plug would be cheaper if you bought them as solder-able connectors. They make xt-30, xt-60, or xt-90 based on voltage and amps.

[@bobbyriddle6354]

Lol don't throw that Plano box in the floor lol I'll take it

[@jasonbroom7147]

SLA batteries really only deliver about half of their rated watt-hours before the voltage drops too low to power typical devices. Discharge them further than 50% of their rated capacity and you risk permanent damage. So, that 96wh battery will really only run a 50w load for about 1 hour. The LFP battery you bought would run the same light for nearly 7 hours, so it's essentially 7 times as much battery.

[@Skkonn]

This comment should be pinned at the top

[@howardfine2209]

exactly. lifepo4 is the only way to go. lead batteries suck.

[@urieaaron]

@@Skkonn yes, big difference.

[@runed0s86]

They can be deepcycled 1000s of times, compared to the lead acid ones. I replaced stairlift SLAs with lifepo4s and went to test the stairlift. Burned out the mofsets after 300 trips up and down on the lift. Batteries still at 50% charge! The lead ones lasted like 20 times on a charge.

[@travgonz]

also important to note watt hours lost during the conversion from dc to 120 ac

[@jordanhause]

I love how you correct yourself. It makes me know you're a humble person who's honest and makes me feel like all your info is as accurate as can be. I know it takes extra work to do that, so thanks!

[@FishinNStuff]

It's easy to edit out mistakes, but I never claim to know everything ,,,,plus it's funny 😁 . I appreciate you watching Sir

[@jordanhause]

@FishinNStuff I've watched almost every video for a few years now, and I'm impressed with your ingenuity. Very educational, and yes, it's funny, too. Keep up the good work!

[@jttech44]

Honestly this has a ton of value for folks, no guesswork required, just buy the list, build the thing, everyone saves money, you make a little money, everyone wins. That's what you call an alignment of incentives right there.

[@FishinNStuff]

I only started doing the lists because everyone wanted them . It's easier to just build the stuff lol

[@jttech44]

@@FishinNStuff Wayy easier man, like, I wish more people making DIY youtube videos would do it. 10/10 in my book.

[@p.piggly.hogswine]

I literally just got back from the store getting some fasteners to build the other ammo box power bank from your other video! Dead serious, thank you for your videos, I’ve learned a lot and you e inspired me to be more self sufficient. On prime day I also bought everything for the solar rolling tool box too, gonna try that next! You’re a good teacher and I like your videos!

[@FishinNStuff]

Thank you very . I try to make it make sense and fun to watch . I really appreciate you watching it means alot

[@p.piggly.hogswine]

@@FishinNStuff you’re welcome! I also bought everything thru your store on amazon, so I hope that helps you out a little bit! Love your content cheers! I lost power recently for awhile and it was really disruptive and I realized I needed a backup generator. Almost bought the predator from harbor freight (which I still might as a backup backup lol) but in researching things I found your channel. One prime day later and I’m taking on both projects! Thanks again! I’m about to drill the holes in the ammo box with a step bit I got thanks to you!

[@silvergrizzly316]

​@@p.piggly.hogswineYou're a fine outstanding subscriber, if I may say so. Cheers my friend! 👍

[@p.piggly.hogswine]

@@silvergrizzly316 thanks lol 🥰

[@Huidos001]

How much did it cost you to build it?? Thnks

[@LowlyDegenerate]

I'm not a fisherman, but I absolutely love the "n stuff" videos! Always learning something cool and useful

[@FishinNStuff]

@@LowlyDegenerate I really appreciate you watching

[@Motordawg-1]

@LowlyDegenerate, I agree I like the “n stuff” too especially as an outdoorsman. I like my hunting too and this build seems better for my deer stand 😂

[@Plasmastorm73_n5evv]

Pro Tip: Use industrial velcro on the bottom of the battery and it won't move around but you can still change out the battery when you need to. Amazon has a great price on the velcro.

[@lunaris69]

thats a great tip!

[@DustyLambert]

The most impressive thing about this video is that you somehow made “kayak” into a one-syllable word.

[@ChrisLove887]

Lmaooo

[@wobblysauce]

I was interested in him calling the SLA batteries and kayak batteries... I think of them as UPS and other things in the house.

[@zeruty]

He makes Kayak sound almost like a racist term lol

[@ourvdo549]

I am the new owner of an EcoFlow River Max door stop. I love this idea for servicability! Great Job! Thanks for your time and knowledge.

[@MrSGL21]

thats my problem with pre builts. it breaks and now its a paper weight. this one breaks and you just replace the parts yourself.

[@bradh3292]

@@MrSGL21 Is there a way to replace the battery in the ecoflow? With another or even a proprietary replacement battery?

[@MrSGL21]

@@bradh3292 probably. I've never worked on one. could be the battery, could be the bms. a person experianced at rebuilding ebike batteries could probably figure it out.

[@melinda5777]

I like this one better than the 1st one you built! I love Lithium batteries. My shed is all solar and it runs my lights and keeps all my batteries topped off for my hand tools including my 80V battery for my lawn mower (bad back, thank you US. Navy) and my limb cutter(which is easier to use than my manual one bc of my back) even though it's a little heavier. OK, blah, blah, blah!!! I figured your wife did your videos! She's real smart! 😂😂😂😂😂❤😂😂😂😂😂

[@brianmorisset4489]

I have made 3 solar ammo cans so far. Though, I put a switch between the battery and the solar charge controller so I can turn them off when they are not in use. I also 3D printed plates for the 2 pin connectors that shows which one is solar in and 12 volt in/out and shows the polarity of the connector.

[@stunick1573]

Built the smaller ammo can (green plastic) one 3 years ago and still use it. The one change I used the little control strip with the on off on it, but still un plug the battery when it is stored. Great tips. Now yep going to have to build this one.

[@FishinNStuff]

You may have been the one that gave me the on/off switch idea . I couldn't remember who commented it

[@stunick1573]

@@FishinNStuff Correct. Glad to be helpful!

[@p.piggly.hogswine]

Omg 7:00 in I had the same issue! Too late for me, I yanked and yanked and got the wires off, but … now I know how! I got the one with usb and usb c , thiught that would be handy

[@bmiller1958]

Just love your content, humor, and editing, and overall style. 👍🏼👏❤️

[@FishinNStuff]

@bmiller1958 I really really appreciate that

[@TKO593]

I just bought the new Jackery explorer 1000 V2. I set it up inside a Milwaukee Packout cabinet in my Packout stack. Now I have portable job site power without the noise pollution. The specs say it can maintain 1500w and peak at 3000W. I also packed a WeBoost cell booster in there for better hotspot coverage in an emergency. The new 200w solar panel design is bi-facial and grabs some of the reflected sunlight off the ground. I was pulling 160W without having the perfect angle.

[@allensanders5535]

when it comes to fishing a little extra storage is always a + in my opinion.

[@brianwade5964]

I really need to build one of these for when I go full off grid camping and do a lot of bank fishing at night for a couple of days. I have been wanting to build the green light hack with pool noodles, and this version would be an absolute perfect addition to it.

[@FishinNStuff]

It really would run a green light great

[@OregonFishingGuy]

Missed seeing your videos. I was worried you quit doing them😢 Glad to see you are still doing them! Love your content!

[@peteruben8037]

of all the many great channels out there for these topics, yours is the most detailed. proper pacing and pronunciation . great researching, ty

[@paulstuartwilson485]

This is a project I could actually envision myself doing. Thank you very much for all the entertainment over the years and all the information you have given. By the way, I now have numerous PVC pipe hacks both in my garage and in my boat. Thanks again. 👍🇺🇸

[@922crappiebbq8]

Another fun filled diy awesome job sir and cranky's jokes are getting funnier 😂😂

[@modifiedtraditionalgardeni9938]

Your video is the one I’ve been looking for ! I literally just bought the box in your video yesterday found your video today with a parts list I’m all set thanks a lot !

[@FishinNStuff]

Thanks for watching it

[@toddshook1765]

After seeing your smaller ammo battery box I had to made one. Friend gave me 12volt 10AH Lipo4 battery, had similar switch plate, and had 30 cal ammo box. It was fun making and use it to charge my phone and blue tooth speaker. Thanks for all your fun hacks and projects.

[@FishinNStuff]

Thank you for watching em

[@raisage]

This is really cool! I appreciate your down to earth style, and how you give a good rationale for all the choices you made. The little interspersed jokes were also nice easter eggs! Awesome video!

[@lejeffe1663]

siiick i just did the baur build and been off grid in a trailer... got a windmill turbine for charging on stormy days. im ready for this build!! the family appreciates this , thank you so much

[@farstrider79]

How much did it cost you total?

[@lejeffe1663]

around $450 to get started obviusly i can keep adding batteries and pannels since its semi modular system, i use a hybrid charge controler that was around $230 and some harbor frieght batteries, eventually ill upgrade to lifepo batteties,

[@hawkwrangler1950]

2yrs ago when I built your ammo box charger I did the solar with it. Still use it on the kayak today.

[@lewisbrodnax7898]

You have a great sense of humor and I thank you for a great, and inexpensive way to make a DIY power station. Keep it comming!

[@chrisjohnson4386]

Kicking myself for only now finding your channel. Awesome video, clear explanations and great fun to watch. Kudos.

[@johnmarschalk1977]

Love how you've figured this out. There's a channel I think it's Ice Hole Fishing, that does these for Ice Fishing. You can buy the built box or the kit with or without the battery from him. Has an LED light to shine on what you're working on. (Tying a rig on) But the thing I liked was a light cup. I guess water is dark so they use fluorescent lures and the cup makes them glow. Use to fly fish at night with glowing flies and had to hold it under a flashlight. With the cup you can throw a couple in and when the one you're using starts to get weak, pull another one out of the cup.

[@peterhipwell4632]

Thank you excellent demo and instructions Bless yah

[@NobleWolf.]

Very cool! I know you can buy a power station already built, but creating one yourself is more fun, and you can build it based on your own ideas, or your needs.

[@coryvaldez8543]

I will tell you I am actually subscribed to your channel purely for the solar/electrical Side of it. Keep up the good videos. You are drawing alot of people for very different reasons. ❤

[@richlaue]

A few weeks ago i started researching for an amo box power for my popup trailer, The trailer is fully setup for 12v. Youve given me great ideas for connections. I also am putting in an 800 watt inverter. And solar panal options. Im also building a 120 AH battery pack.

[@puddintheredneck4422]

I watched your Big Harbor Freight box. So I used your video and made it. Best thing I ever do e. Thank you.

[@JohnW118]

Educational Entertaining AND Practical. With jokes, too. (Yes, I had watched your other Solar Powerstation video too, ~ seven months ago. it was Educational Entertaining AND Practical too.)

[@FishinNStuff]

I appreciate you watching too

[@MissingLinkMTB]

Simpler, and very portable. I love it. Think I'll be building this one for sure!

[@songs1791]

Just found your channel, man I must say I was impressed🤩!! and that ain't easy to do. Anyway, I used your links, purchased all of them items and built this solar station. By the way thanks for the discounts on everything saved money on this project! WOW👍 I am impressed with the performance of it. I am a retired electronic tech so that isn't easy to do with me! But I do agree with you (sadly😥) on one point the "other" pre-built power stations become a really great paperweight (or boat anchor) if you smoke one (yes talkin' from experience😵‍💫) Man keep up the great work👋 you got super ideas that just set me on fire to build build build!!!

[@TheRealAfroRick]

I love this guy, I love this channel, and I love how well he explains stuff in laymen's terms. 🎉🎉

[@Lysander_Spooner]

Just found your channel and I'm loving it! The combination of valuable information and humor is very well done!😃

[@markgilles-ih8go]

Total ingenuity, very impressive! Wonderful step by step video for us DIY individuals.

[@FishinNStuff]

Thank you Sir

[@trcass1]

this was a great segment. loved that you got everything into one box. Really liked the Wirefy crimpers. Added them to my list. thanks for sharing this build.

[@FishinNStuff]

You'll like those crimpers

[@JnJTrueOutdoorAdventures]

Nice video!! I did the same thing with an MTM plastic ammo box, and I put three of those 8amp/h batteries in it. Still 12v but tripled my amp hours. It can be recharged by vehicle lighter socket, it can also be recharged by AC, and lastly it can be recharged by solar!! It really comes in handy for recharging my video camera gear, GoPro, Sony/Canon video cameras, my two-way radios and I put a small inverter in it as well. I have video of the build before adding the solar, then another that shows the solar. Like how you did this one!! Thanks for sharing!!

[@FishingWithChris_Tv]

I made mine based on the older model, I wish I had rigged a on/off switch so I wouldn’t have to connect the wires to the battery every time I need to use it. Not that it’s a big deal but a switch would have been more convenient. Also I’m glad to have seen you in the chat with the live stream I was in with PanFishWeekly 🤙🏼🤙🏼

[@FishinNStuff]

I really like Lyle and the guys

[@MrIrishalley]

ive been camping a few times and i also use a cpap. i typically bring my car jumper box that has a convertor and air pump on it. i got it from walmart a few years ago and it was under 1 hundred. last time i took it was for winter camping and it didnt like the cold and didnt last but 10 or so minutes. i took it apart due to the air pump breaking and saw the batter it was smaller than the first battery you showed. i think this box with some insulation could work great in the cold. might have to build me one

[@ssteele1812]

Just remember that you absolutely should NOT charge a lithium battery if it is under 32 degrees. They can suffer severe internal damage. You are fine to use it in the cold, just wait for it to warm up before charging it.

[@MrIrishalley]

@@ssteele1812 thank you, never really though of that as i typically do charge in indoors. so ive kind of accidently been doing that but will make sure its what i always do now

[@ChessIsJustAGame]

Long time hobbist and maker and I already have that box and that solar panel plus all the tools and wires, etc... so currently setting up Amazon delivery for when I'm home and the wife isn't. 😁

[@Alex-je6od]

Your math is correct @2:35, but inverters aren't 100% efficient. Shave 20% off of that runtime since most inverters are ~80% efficient 👍

[@brianlykins6663]

Hey, Keith. Well you got another great video. All good ideas convenient, everything fits in the same box. You don't think the battery would get a little warm when in use and charging ? It wouldn't need a little cooling fan or vent holes ? I know you could just leave the lid open, and it'd be fine. Just wonderin. Thanks for all the great ideas you bring us. Keep up the great work. God bless, and y'all stay safe out there in the shop

[@iamjessieray]

Hilarious and informative. I will be saving this video for when I want to build a battery for my astronomy gear

[@thomasjarosz7406]

Fishinnstuff, I saw a bait cooler with solar panel on top and 2 pumps. Please make your version of this bait cooler for the People that can't afford the 300.00 Catfish one. Thanks God Bless

[@mericanwit]

This would be an awesome build especially for us Surf guys cause we all know boat caught fish don’t count😝😂😆🤣🤩

[@dannyneal9713]

Loved the video !! Really learned alot of different ways to do things that saved me either a bunch of money or a lot of time. Thank you 🙏 ❤

[@rl2109]

Great video! More practical than the toolbox version, but I keep hearing that size doesn't matter... [sigh] I am unable to do this right now, but I have added this to my projects list...! On another note, and I don't mean to divulge site secrets, But I suspect that YOU are the writer of Cranky's jokes...! That would explain a lot regarding delivery and effectiveness... In closing, since the best jokes I can muster would get Bob Hope thrown out of the cemetery, so let me say, Keep doing what you love! God bless ALL of us! WWG1WGA

[@FishinNStuff]

Thank you for watching . You save alot going with a smaller battery. That parts completely up too you

[@davidwestmoreland9490]

Great video and some great jokes as well. Appreciate the way you include links to all you used and the price break down at the end. Didn't keep track during and surprised at the total cost.

[@FishinNStuff]

Thank you

[@dfox7777]

I really enjoy watching your videos! I've had a similar idea but always fall short (ADHD) on the research, and I can really tell how much thought and the you have put into these! Thanks for giving us an awesome step by step with parts list!

[@FishinNStuff]

Thank you for watching Sir

[@earthssecretenergy2371]

you are absolutely right, start learning and build as many as you can. ETC

[@NWAAdventures]

Just installed a roof vent fan in my truck camper. I think I'll make one of these to run it off of. Thanks!

[@FlexDRG]

I just turned a plastic 50cal ammo box into a li-ion 12.6v 120Ah powerbank with a stabilized 12v 20A board and 12v plug and QC3 and PD USB ports. With a power switch ofcourse. To be used for my computerized telescope and as camping powerbank to run all sorts of stuff for days and days. No solar charging though.

[@djb1634]

You could add another switch to connect and disconnect the charge controller so you don’t have to open it. You could put the switch next to the charge port as a reminder for which port is which.

[@brianbowles99]

Great video brother because I'm fixing to start building them at home for myself first and if it goes good I'm going to start advertising them for sale but your explanation was awesome and thank you again for sharing

[@pawsnazzy01]

Another great video Sir, Keep up the good work!

[@FishinNStuff]

Thank you

[@Motordawg-1]

This hack is going to be a great addition to my 🦌 stand this season.!. I like the multiple ways to charge it.

[@FishinNStuff]

Never even thought about a deer stand . That's a great idea

[@robertgreer5229]

Funny jokes and humor😂! Buy a jack art lol! Love he little lure guy he gives it to you! Lol 😆 😂!

[@bwcok7947]

TA DAY ya done outdid yourself! Thank you!

[@beerdrinker6452]

Very informative. Thank you.

[@deanrsanders]

gotta build one of these...very cool. Thanks for the build and specs.

[@RichardReed-hh7oh]

I made one from ammo box with kayak battery and let me tell you I love it... Thank you

[@billmoss5624]

👍😎✌ Thank you Keith

[@MorganSharp_stolenlives]

Great instruction video. You make learning very entertaining. Your corrections are fun as well. Thank you.

[@calamity3457]

Depending on the kind of power supply you have, you might be able to skip the "wall charger" port and just charge the battery through the solar charge controller. More detailed description below. Usually, solar charge controllers are designed to accept a wide range of voltages. As an example, say 12 to 48 volts. You'd have to read the manual for your specific controller. Regardless, the solar charge controller shouldn't really care where the input power is coming from, as long as it's DC and in that voltage range. Some problems might arise if you try to connect a car battery charger to the solar charge controller. If you don't have a trickle charger, then the wall adapter might change its output voltage depending on the charge level of the battery. This has the potential to confuse some car battery chargers since they won't be seeing the batteries' voltage. So what this means is that if you have something like an old laptop charger, you could cut off the old connector and make a new one, then use that to charge this system through the solar charge controller port!

[@cooterduke3605]

I built the original ammo box, but this one's way cooler! I'mma NEEDIN' this upgrade! 😁

[@FishinNStuff]

@@cooterduke3605 it is cooler and 4x the capacity

[@Emily_M81]

saw the big roller cart harbor freight one first, now this one. subbed. time to go shopping :D Thanks for sharing

[@ramonmacias9013]

most of the Jackery use Lithium ion and have 1/8th the charge cycles of a LiFePo battery system for price of the Jackery you can get a Ecoflow River with 3000+ charge cycles for less money. but i do very much enjoy the knowledge and instructional step by step you have shown. i might use some of your ideas on power for some of my out buildings on my property.

[@FishinNStuff]

I personally really like the EcoFlows too . Thank you for watching

[@robertrootz1851]

I have the marbero m88 power station and solar panel it works great for it's size with motorcycle camping. Nowhere near the available power as the ammo cans. But I ran a house lamp for about 4hrs

[@mustafadut8430]

You can replace the USB in the Marine set with a Q.C 4.0 output. There are devices that plug into the USB 12V car lighter with a higher wattage output suitable for that bed.

[@ken-bh3hr]

Where ya been

[@RafeTVGaming]

thanks for showing this great build! maybe a way you can fix the solar controller being powered from the battery is to add a diode in series in between the solar controller and battery so that power can flow from the controller to the battery but not from the battery to the controller .

[@FishinNStuff]

Good idea

[@Kingrich09]

This is a brilliant setup. My only comment of concern is the power switch and how it is wired. Most switches that style are not rated for the amperage that you will able to pull out of that cigarette outlet with the power inverter, the switch will eventually overheat and melt. It should really be wired into a relay so the switch is energizing the relay to power up the rest of the outlets.

[@FishinNStuff]

You are right

[@raywister5138]

Thank-you, I love your hacks. And I'm solar curious.

[@kevinpt3]

That plastic ammo case fits 4 5ah lifepo4 batteries across. Used this as an expansion for an apc battery backup

[@cosmicbrambleclawv2]

Finally, a youtube video suggestion thats worth its salt ❤ (or at least entertaining 😂) Definitely considering makin one 🤔 but I need to finish re-kitting my trunk survival stuff 😂 (I upgraded to a suv from a sedan, so now I have to redo everything)

[@FishinNStuff]

I've done a Survival fishing bag too lol . All true but mostly entertaining as well lol

[@cosmicbrambleclawv2]

Just added to my diy playlist :D Gonna grab a bite (without getting hooked myself 😂) and watch while I eat :D

[@r.a.monigold9789]

Your style brings out a smile. Your TECH is good, by heck. Your lure what tawks, tells lousy jokes, but hey - ain't nuthin perfect. Thanks for sharing!!! BTW I subscipted.

[@brucerobinson2644]

You crack me up. 😅 Fun to watch and informative too.

[@wjf213]

This is a very cool build, and thanks for taking the time to post the links as well. Just a thought, have you ever considered adding a retractable cord on the inside so you always have some sort of an extension cord? I'm thinking something compact like a vacuum cleaner retractable cord. They can easily handle around a 1,000 watts or around 8 to 9 amps at 120vac. I have never seen anyone add something like this, but to me, it just seems like it could be pretty handy, and really an advantage to why you should build your own, and add a lot of custom features to it. Amazon has all sorts of replacement retractable cords that are pretty reasonable. Keep up the great work.

[@Catman-mg9ye]

I love you’re humor and MPPT OR MTTP LOL 😂

[@fredbees9991]

dude where have you been ,,,,,,,,,,,,,,,,,,,,,i keep looking every weekend for a vidio

[@mwgillispie]

Thanks for another great video! Keep on keepin on!

[@michaeltaylor4984]

Awesome! I have a couple of 20mm ammo cans that I can put 2 battreys in. Gonna be a little heavier, but worth the weight

[@johnmarschalk1977]

You could tie in a couple of LED lights on the right side of the box with a switch and have some light when you needed it. Would have to figure out the wiring, but shouldn't be too hard to do.

[@ssteele1812]

I have those USB ports he is using. I wouldn't try reading by them but they make a really good night light in my living room. lol

[@kennethmedlock6381]

Brother, I enjoy your hacks. We need more of them.. great job. I can't wait for the next one!!!

[@FishinNStuff]

Thank you very much

[@jeffbrummette1622]

I’ve missed you! I’m glad you’re back on you tube again! Loved your video today! Very interesting content!

[@FishinNStuff]

I upload 1 a couple weeks ago . But KZbin doesn't always notice everyone

[@leonshelton4282]

Your builds are great, bending the connectors to fit is good but for future builds they make a flag or 90° connector so you don't have to bend them. Just a thought. 😉😎

[@FishinNStuff]

Ima look that up thank you Sir

[@whochecksthis]

FYI, you don’t need a separate input for the wall charger. The mppt will pull what the battery needs, and control either solar, or wall charger watts. Then you can use any laptop charger to charge the box.

[@Go_Play_Outside]

This duo, human/fish mascot, could be the Southern version of the Why Files. 😂

[@FishinNStuff]

Lol I've never saw the why files but that's funny 😁

[@vinniebuiltRC]

Love your videos keys keep them coming

[@runed0s86]

Those lifepo4 batteries can't handle as much current draw, but they can be deepcycled 1000s of times! They're lighter and have more capacity, but they can't jumpstart a car.

[@Juanderpets701]

The panel you use is good in itself. Using a larger panel will not be suitable for your 10a Mppt charge controller. Also, the battery is better because the smaller one you showed is a led acid battery which means you can only use it at 50% capacity.

[@nickm9102]

With that case I was thinking a slightly different layout. I was thinking that the storage area on the lid would be a good place to place the controls and connections. Also in regard to the Charge controller you could add a switch between the battery and the controller. I have also considered doing a laser cut style can insert that would make it an enclosed box but that limits the capacity even more but it does give the ability to connect an external battery bank. maybe another box with just batteries and a connection.

[@gregoetker1389]

Add a Solid State Relay to turn off the MPPT controller via the On/Off switch. That way, you don't have remember to unplug the MPPT.

[@RollinRollinReelin]

Hey there brother! Great to see you back! Great video man, thanks!

[@fishin-impossible2992]

Great video as always. Man what an awesome build. That thing is bad azz . It would be perfect for camping or bank fishing at night. I'm going to have to get off my butt and build me one. Hey how about an update on the solar powered building project. Thank you for pumping out such Awesome content. God Bless you Brother

[@justuschmiii3173]

Now that I'm cross-eyed, I'll look in the description and buy all that stuff so I can have me a homemade jackry fishing and stuff TNX 4 VID LOL