THE TRUTH ABOUT ROTA WHEELS

[@joosunkmybattleship]

Rotas held it down for the car community back in the day. When you're a broke college student and you get that financial aid check in the mail, you go to Rota

[@layesse1]

now adays everyone in the car community is rich or just want to pretend to be

[@PodsvjestanHlad]

LMAOOOO. IF THIS ISN'T ME RIGHT NOW.

[@stantonwarner8403]

hahaha I was gettin crushed with financial aid pay back from doing that back in the day!

[@Ties445]

Years later me

[@iheartgs400]

Rota wheels are great quality they test this wheels on the shitty Philippine roads and they held out well. As a Filipino myself that’s more than enough for me to go for them if I don’t want to fork serious cash for BBS.

[@UguisuAnko12]

Late comment but I do also use a Rotary GT3 wheels on my Honda GK5 Jazz manual!! They’re really great wheels!! Color is white btw!! I’ve had them for almost 2-3 years!!

[@yautja9486]

When we got invited to watch the first Toyota Cup they have used the Rotas on all cars... When the race went on for like 20min one car had suffered from a blown tire... The heck we were shocked he ran those rims on the tarmac for 4 laps without any tires on them! I gotta say I think I'm a believer.

[@driver_18]

A lot of haters on Rota, just to let you know they also make the oem wheels on a number of Toyota vehicles. They are reliable and that’s what matters.

[@FiveCurmudgeon9]

thats why you replace the wheels on your toyota

[@erfederizo]

@@FiveCurmudgeon9 people replace them for asthetics purposes, not bcoz they're unreliable

[@khinovideos]

And ford, nissan mitsubishi etc

[@olavofernandes7286]

That was rays engineering not rota lol

[@driver_18]

@olavofernandes7286 at what point of this comment of yours came from? Not a single point of Rays was discussed about.

[@HagakureJunkie]

Have had 18” rota SVNS on my stage 2 wrx for like 8 years. They’ve been very reliable, no cracks, dents, etc despite sliding sideways at 90 several times.

[@extrahourinthepit]

To drop my two cents like an incontinent vending machine, Rota, sooner or later, was bound to happen. If a manufacturer loke Volk or Work makes a nice wheel, especially a racing wheel, there will inevitably be people that will want to get one without actually needing the performance it delivers or caring about the big, famous or high-end brand, and most importantly, lacking the green to back up a four-digit purchase. See stock-ish Miatas, or even EGs, rolling Grid-Vs. It's just stupid to think someone who's spent 3k on his car will pay as much for wheels if only he's not offered a cheaper option. And if that demand is going to be met by offer (as it always happens everywhere), I'd rather have it be by a manufacturer that actually bothers testing their wheels, works with actual car manufacturers, is trusted and supported by people like Tsuchiya, and very much importantly (something often overlooked) caring about the customer (meaning they actually offer a warranty and will replace your wheels free of charge. Look for another "fake wheels" manufacturer that does that). Is it unfair to, if not outright copy those wheels, certainly aim to sell them at those who were interested in them? That's on you. But it was always gonna happen. And personally I'd rather have law law to be too loose than too strict. But it was gonna happen anyway, and Rota is pretty much as good as a manufacturer like this could ever get. Whether you like it or less, cheers to all our broke buddies riding safe thanks to Rota.

[@MrInstinctGamer]

This is honestly the best way to look at. At the end of the day, I got lucky and found an amazing condition s197 stang for 5,500$ in wholesale. To spend 1 grand per wheel is just not something feasible or appealing to me.

[@onelowvdub]

man even new rotas are pushing it on my 1000 dollar beater lol

[@neilatajar]

Agreed. I’ll probably get some for my g35, I ain’t trying to pay 3k on wheels.

[@ej1_drew]

bought my bare shell for 300 with a 200 dollar pick-a-part engine and about 300 for every wiring harness engine to trunk - you bet im running grids on this beater

[@johnpaulmarinas]

ROTA wheels enabled first time car enthusiasts to enjoy their cars by starting to modifying them according to their own likes & taste. Great looking quality wheels you can use (and abuse) without breaking the bank. Race competition proven and tested. If it’s good enough for racing, it’s more than enough for the streets. 😎🇵🇭

[@creed8196]

Are we forgetting that the big companies of ‘genuine’ wheels copy each other too. Rotas aren’t even that bad. Anyone who says they’re shit either have bad luck or haven’t had a set. I race on Rotas and never had a problem. The genuine are great but they aren’t the only option.

[@Verkku555555]

How good are they in cold weather daily use? Will they crack in cold weather? I live in finland and im not sure whether or not they can handle -25 celsius with rough use.

[@creed8196]

Pyromaniac I’ve only used them at a lowest of 5(ish) degrees Celsius. It doesn’t get too cold where I live. However they hold up well, same in 40+ degrees Celsius days. I’ve been pretty rough with mine too

[@701garage]

@@Verkku555555 your good they will hand the cool they are used where I live which reaches -53 with wind chill

[@meifert2]

I destroyed 2 with a single launch on a drag strip. It literally sheared the bolt holes right out of them. I cracked an entire set on my FB. I was literally told the car was too powerful

[@sv_cheats1970]

@@meifert2 torque?

[@knav5216]

Most people who hate rota aren't even racers. 😂 I'm not claiming to be one but for me, quality + light weight + reasonable price = perfect for a project car. You can use and abuse it. Hahaha

[@meifert2]

Ken Navales they are not that light. The 15x8 wheels on my RX7 weigh as much as the 20x9s on my truck. Of course, my truck wheels are Methods and are lightweight for their size

[@d1gitaldeath]

Rotas the the dogs balls for the money dont let any1 tell u different if u smash 1 ur wont lose a wink of sleep and look as good as wheels x2 the price how can u go wrong lets be real

[@d1gitaldeath]

Also my ep3 oem wheel was 20.5 lbs the rota torques 18 lbs x4 not to bad and sold the oem and made money

[@civicricer1505]

my uncle said my rota branded wheels are trash lmao he’s a mechanic who can’t even properly fix cars what a dick

[@abepowers4379]

i remember seeing a t shirt saying," Friends don't let friends roll on Rotas." Now I respect them more. like he said,600 bills for a set of wheels,is 6 bills for a set of wheels. Think of the kid who just bought his first car,from working his first fast food job. I don't even think you can get a set of stock alloys for 6bills. Used 19" alloys for my car are about 12 bills

[@FitmentIndustries]

Well said haha

[@BluBeriRolla]

Wow. Im filipino and my rolla has rota wheels and i did not now that rota came from the phil. Very informative video! :)

[@FitmentIndustries]

Thanks

[@antzviel9966]

Its filipino made and very durable. For $600 its very tough.. good for drifting

[@francispalomo2201]

Factory located in KM16 Paranaque...

[@russoformoso]

Same here

[@guintoramcesv.9675]

Rota means "path or way" on the Philippines or in deep Tagalog.

[@ch2danB]

Rota user here

[@HagakureJunkie]

Chito Dan Same, they’re good wheels, have served me well for 8+ years

[@SapphireDonut]

I don't care if someone with a set of $2000+ forged blah blah blah wheels that they're afraid to get dust on talks crap on my Rotas. In the end, I'm probably getting the better bang for my buck because I'm having more fun taking them to the track and off-roading. You want spend thousands to support X company? Good for you, but I'll use the money saved buying replicas to fund my other hobbies...like my next fishing trip.

[@Mataz007]

Chris Vong my ssr sp3s are daily driven rain hail of shine and cop burnouts, pot holes and aggressive driving in general. Bit of dust won’t hurt them when they are covered in mud and other shit. They always clean up like new though.

[@pikkagtr1942]

Depends on the car really. I would put some $400 slips on my civic but I'd rather spend some extra cash and sport BBS FiRs on my M3

[@norgepalm7315]

Pikka GTR well no shit, its takes a moron to put expensive wheels on a cheap grocery getter

[@slow26gtr]

Justify it however you want.. at the end of the day you're wearing a fake rolex, what exactly are you expecting.. praise?

[@werterbrers]

Yo Hoes I see it as buying a watch that looks good, is affordable, and is reliable. Not because I want a fake, but because I would rather mess up my first aftermarket rims that only cost 1000$ a set, not 3000$ a set.

[@Wingspan_5]

Honestly nothing better for a drift car. Who cares if you smack the curb and crack it? They're cheap af. Can't say the same for the "originals" in most cases.

[@FitmentIndustries]

Very true

[@TejasAutoSalonJasonW]

Thank you so much for clearing an argument for me. I been saying that Rota has been around just as long as the big 3. And, that for someone who wants to add better rubber on a car that's got 0 offset and 14" wheels Rota and XXR are good choices and don't REP anyone but themselves. If they're good enough for the original DK, they're good enough for me.

[@FitmentIndustries]

Hey, not a problem Jason!

[@shredd120]

Been running on rotas since 1994. Never had a problem with them

[@carlod803]

Rota Reeve deserves more respect, that wheel is so light and is also used in the Toyota Vios Cup 1 Make Race

[@FitmentIndustries]

truuu

[@lennyloudpacks]

These videos are really underrated. More people should know the history of what they're buying and what they're getting into. Earned a sub

[@FitmentIndustries]

Appreciate that Leonardo!

[@neilatajar]

I had Rota p45r on my 350z. I had zero issues with them.

[@UndergroundTrev]

This video makes me feel so much better about owning a set of Rotas! Hahaha ...I'm serious, it does though

[@FitmentIndustries]

🙂

[@Flooozeee]

I ran Regamaster (spoon) wheels on my old ITR but when I started AutoXing it I needed 15X8- 15x9 so Rota is was. People talk so much shit but if they are good enough for motorsports they are good enough for me.

[@FitmentIndustries]

Drop some pics in our gallery man! www.fitmentindustries.com/add

[@Ryan-ix6dt]

Honestly I’m glad there’s wheels like rota. Knockoff wheels with decent quality and an affordable price. Good for people on a budget and for beater cars like a drift car.

[@213PURPLEYAM]

I’m a Filipino my self know about Rota way back no issues whatsoever using it on the track on a regular basis on my ek and teggy

[@thirtyonefifty3133]

Rotas been pretty good in my book. They aren't the real thing but they do the job. Yeah its a company that steals designs from other companies but you can only do a 6 spoke rims so many different ways before you get the same look. Just look at CCW, some of their rims look like BBS and other wheel manufacture's rims. When it comes down to it, its what you can afford, and if you can afford to run rotas or run BBS, Welds, Works, etc then more power to you.

[@migzzz740]

*ROTA WHEELS IS FROM PHILIPINES*

[@trentmon]

When I was a kid I kept seeing "Rota Italia" stickers on cars, now I know why they dropped the "Italia" part. Great Video!

[@zeroswings2]

NOICE! currently running Rota RBs in 17x7.5 & should be taking delivery of some special order RKRs in 17x8 any day now... I personally don't mind Rota 'knocking off' other wheels because I couldn't get RS Watanabe in the offset I need in 17x8 R types. I do think too many wheel companies are doing 'me too' designs these days... all the more reason to push for my own very unique wheels to get to market somehow. Anyway... eye-opening video on Rotas... thanks!

[@FitmentIndustries]

Your welcome

[@joshgarcia3660]

Damn, I learned that Rota originated where my family represent #PinoyPride🇵🇭🇵🇭

[@CLU7CHxCl7Y]

Intro was “LIT” 😂🔥👍🏼👌🏼

[@FitmentIndustries]

:D

[@deltamane17]

Fitment Industries I died 😂

[@TheGhost13960]

Fitment Industries bro the name of the tracks please

[@onthevirge350]

Rota D154 user here. I drive a Fiesta hatch in the Philippines. Anyone who has driven in the Philippines know how horrible the potholes are. Unfortunately I ran into one and cracked the front right of the knock off wheel that came installed when I originally bought the car. Next day, went to my favorite tire place and got myself a new set of 16s D154 and Hankook tires. In the Philippines though they go for about $800 for 16s, more if you go direct to Rota.. That bit confused me, they were more expensive from the manufacturer than their reseller.

[@Jalum64]

I've just shared your site with 5 separate KDM pages to get more in your gallery. Hopefully you see an increase of KDM over the next couple weeks. The only thing I don't like about Rotas is that most of their wheels are similar in design to me. There's a few I like that like the TS6-F, but they don't run a 17in since that's what I think looks best on my car.

[@FitmentIndustries]

Means a lot Phillip, thank you so much!

[@randyej2pr]

Been running my slipstreams for a year now. 16" and a 205/50 tire on it. Take pot holes not so bad and its been holding up nice. No bends or chips or cracks. Paint stays pretty good against the rock chips and rotor dust. Rotas are good for the price.

[@FitmentIndustries]

Good to hear man!

[@maxcuellar94]

Do watercooled industries !!!

[@FitmentIndustries]

We'll do some research and see if we can gather enough information Max :D

[@pewdiepieschur-haig1483]

uh oh....

[@SmoothAsButterSN]

Lol first time they didn't say they will add it to their list and I think I know why..

[@awesomesoos2317]

please do. WCI

[@Pete-jr4lw]

This sounds like a debate between designer hand bags vs. knock-offs (I don't mean wheels). It makes my man parts want to shrink up just listening to some people argue over the "real deal" vs. bang-for-the-buck. If the wheels look good and meet your daily needs, who GaS? Why waste the money unless the lower weight of the originals are what is most important for your track time. Seriously, that concern applies to maybe 0.001% of the population winning races somewhere. I drove on Rota G-force (gunmetal grey) daily for 9 years and tracked the car at Putnam Park, too. Had 0 issues with potholes or spirited driving. They were great looking wheels, just like the Advans they copied. Worth every penny, and the rest of the pennies I spent on my HPFP and a proper tune for my Mazdaspeed3. But hey, maybe I'm just not "street" enough to appreciate the design bags holding my tires to the hub...

[@hakonnbben5353]

I have a set of Rota Gtr 18" on my 300zx z32 with federal tires and have been running them for about five years, no problems so far!

[@FitmentIndustries]

Drop it in our gallery! www.fitmentindustries.com/gallery

[@kevinbates3575]

I have rota kensei's on my 280z . going on 4 years of use, so far so good . Even the paint finish is holding up great in the florida 🌞

[@EmjayDTube]

I run Rota Fighter 10s on my E210 Corolla and planning to get a set of Rota MXRs for my E90 320i cause I don't want to spend a lot for Rays or BBSs and it makes the cars look good for a fraction of the price but with great quality

[@ihatemacs9]

I had Rota Subzero wheels on a Mazda because it was a copy of Racing Harts used in the World Speed Challenge cars run by Tripoint Engineering. They held up well for 6 years until I hit a massive pothole at highway speeds. I also had a very aggressive wheel cleaner that ate through the clear coat. The factory wheel would probably have fared better against the pothole but I feel like it's true for most aftermarket aluminum wheels. But even with a custom center bore to fit the Mazda hub the price and quality couldn't be beat.

[@jeremyjamesgigante7898]

Always great to see Philippines represent. Thanks Fitment.

[@skiasfyo9565]

I've had both XXRs and rotas. Not one issue either...also loved the Riceland coilovers 🤷🏼‍♂️

[@JCub316]

Just bought a set of rotas for my 77 280z, I was mainly concerned because it is LS1 swapped and I plan on beating it pretty hard. I didn't want to spend $3k on a set of real TE's or Watanabes so for the $1k I spent I think it was worth it for the rotas, only time will tell though.

[@dimsuminab0x]

Had Rita G-forces for two years and not one issue. Plus who copied who work meisters s1? Or SSR SP1? Those designs are essentially the same but no one calls them out because they’re top of the line wheels

[@erfederizo]

Still have my 11 yr old rotas in my lancer. Slaloms, track, everyday driving, super ugly roads and potholes here in the philippines, and it's still in one piece. Love em, and will buy another set for my MPV

[@mike.135i]

the cut scenes in the video are hilarious

[@mike.135i]

2:15 ffs XD hahah

[@FitmentIndustries]

:d

[@Momo_8k]

Rota bridged a gap by bringing lighter weight performance in designs that one could say were a “homage” to their original counterparts. The OG slipstream was a take off the regamaster but was 1/3 - 1/4 the price. Weight different between the two? Maybe 2 lbs on 15”. Rota allowed the budget enthusiast to keep on and enjoy their hobby. Fresh shoes could be had for $600 which looked like those TE37s at $400 each. I would argue that rota allowed the new age, modified car culture to proliferate and grow. The modification options for my frs far outweigh what was available for my MR2 back in the day. Screw the haters; thanks to rota, thanks to Honda, thanks to the game changers that have paved the way for companies like fitment industries.

[@FitmentIndustries]

Thanks for the input! We would agree they definitely stepped their game up!

[@angelonoa6044]

But why is ROTA on Forza?? hahaha!!!

[@sodamiclown2102]

I just bought a set of rota grids and i am perfectly happy with them

[@playwithcars]

I had a set of Rota IK-R in a 5x100 18x9.5 et38. Abused the living shit out of the wheels over a long period of time but it finally started to fail when i hit a bump at like 60-70km/h bombimg a back road. The rims after a few days developed a crack (which i only started to notice when my tpms told me i was losing about 1-2 psi a day) i honestly thought a rim crack would have just leaked all the air out. Tl:dr they are pretty decent wheels and would run them probably on a daily. But boy were they heavy.

[@Volk_]

Thanks for the information. I now will only get them straight from Rota. Works for me because I have ALWAYS wanted a set of P45Rs for my Golf R.

[@justanls]

Interesting video. I'm on my third set of rotas (I ran track r's and gt3's on my integra) And Ihave no complaints other than scowls from big name die hards. I've been running a set of grids on my 350z for four years without any issues whatsoever. In the end I would rather spend big money on quality power and suspension mods and spend less on visual mods that mostly just add scene points but to each his own. I also believe if you hit any wheel hard enough it will bend or crack. Just my .02 cents. Great video and keep coming with the content.

[@FitmentIndustries]

Thanks man! You should defiantly add your Z to our gallery! www.fitmentindustries.com/add

[@CoffeBlack]

Surprised noone has said do Vossens yet. Or maybe they have and I just missed it. idk

[@FitmentIndustries]

Added it to our list :D

[@real_talk1180]

Hey any idea behind the Rota Recce original design? Do you know who originally made this design that they copied or is this actually theirs?

[@locar12]

try Black Rhino Boxer Truck

[@s13nathan]

Deadass got curious about ROTA Wheels because I'm considering about getting p45r

[@vinsagun1346]

I do have Rota wheels on my 2001 Civic. So far, so good..

[@swartzautoman2]

I had a set of Rota D2 17x8.5 Great wheels, never had an issue with them.

[@Mininoober]

What fitment/offset etc would i need to put rota gtr's on a stock rx8? And have no issues?

[@FitmentIndustries]

+20 IMO otherwise you can check out our online gallery to see what fitment you think looks best! bit.ly/2NNqzW9

[@jamesebora3266]

I'd go for rotas instead of those counterfeit wheels from china and thailand that breaks when you run them in the track or some nasty pothole.

[@darienm7642]

Okay I’m stuck between 2 wheels, either the Xxr 527 or the rotas g-force. Which should I get and why?

[@UguisuAnko12]

Late comment but Rota user here!! I have Rota GT3 wheels on my Honda GK5 Jazz/Fit manual and they’re running pretty good especially on our shitty roads here in the Philippines!! Never broke down a single once!! Btw, I have that GT3 Rota on white btw!!

[@yiqiao7513]

what's the back ground music?

[@justwannadundundance3116]

Lil Uzi Vert - XO Tour Life

[@nieldac2717]

i bought my Rota grid for only 15,000 pesos (USD 300) brand new straight from their factory in south of metro manila. 4 years later 0 issues despite the fact of how "smooth" the roads here in manila are.

[@spreadhysteria3650]

you could never go wrong with ROTA

[@makerl1fe388]

Are they any good for winter with dunlop all-season tires? Also the roads are pretty rubbish, lots of potholes or half-asfalted ones.

[@jamalallen8047]

It's like they didn't even watch the damn V I D E O . "Fake wheels" they're affordable and have a way better rep than XXRS. if you wanna ball out on 1k 2k 3k wheels and eat ramen for 3 months go for it 😂 just so you can feel cool or accepted you can have dope 3k wheels and I still be a POS . I'll plan on buying some rota ss10 (Advan reps) 🍺🍺🍺🍺 cheers

[@pandaboi8six]

Nice bro! Just got myself GRID V classics, i love the real ones but im not rich to just spend 4k like it was nothing

[@N.I.R.A.T.I.A.S.]

I bought a bugeye WRX as a project car about eighteen months ago. Came with a set of Rota wheels on it ... 'Gravel' model, I think. Anyway, I left the wheels on it because they looked pretty good, figured I'd replace them when I need to. Still going strong, still look good. Don't understand all the anti-Rota sentiment.

[@jomari369]

I like to change the rims on my car. Rota Grid or Volk TE 37SL?

[@FitmentIndustries]

Volk playboi!!!

[@jomari369]

@@FitmentIndustries Is the price difference worth it? This just for my weekend summer car.

[@meifert2]

I have a set on my RX7....all 4 have major cracks in them and the tires no longer hold air. Total fucking trash

[@crossphaded]

I've owned a couple sets of Rotas in the past. Never had any issue with them. And hey, they were manufactured in my motherland! Gotta support my ppls!

[@FitmentIndustries]

Good to hear!

[@s.in.bagger9933]

You know your phone spies on you when you buy some Rota Slipstreams. Then, the next day, you get this video on your recommended list on KZbin. Well played CIA/FBI....well played....

[@frostedjedi]

Exact same thing here. Slipstreams and everything haha

[@s.in.bagger9933]

@@frostedjedi Technology is a blessing and a curse lol

[@FitmentIndustries]

BOI! 👀😂

[@4door_papi]

Same shit just happen to me

[@cobratoxic]

Dont forget O.Z.

[@FitmentIndustries]

Oh we wont...

[@lightninglashx9332]

oh sweet id loved to hear about them

[@lopezgproductions4587]

where can we buy Rota's here in the US? Any website they sell Rotas and ship to US?

[@rezylazzir9294]

I have Rota slipstreams on my fiesta st and they are great!

[@rubaru9861]

Most popular choice

[@edreyez484]

How about Lenso wheels? What can you say about that?

[@Kev27RS]

Edward Reyez It's another "replica" brand... 😂

[@grailph]

Just bought 16x7 rota slipstreams, and they are just way better than stock rims. I ran over a curb by accident, and they didn't have any bend whatsoever. I was just over 20kph, really impressive.

[@jim-lj1ns]

Love all the hilarious little clips! I run Rotas no problems ever.

[@FitmentIndustries]

Thanks Jim! Load some pics to our gallery! www.fitmentindustries.com/add

[@setra23]

Fake and replica, people need to learn the difference. Also people like to ignore SSR S1s and Work Meisters S1s being the same wheel design.

[@justinnguyen3091]

they're very similar but the spokes on the SSRs go to the barrel and the WM don't. I would say the Advan RS and SSR GTV02s are closer. But regardless they're replicas.

[@swartzautoman2]

And Rota D2

[@bwing4006]

This wheel series is 🔥🔥🔥

[@FitmentIndustries]

Thanks B wing! Have you seen all of them?

[@Alexwaltman850]

So Rota wheels aren't bad wheels but your company doesn't carry them? Disappointing if I'm being honest. I wanted some RT5's for my daily.

[@TheProgGuy]

Yeah, they make sorta replicas...but at least they produce a handful of bolt patterns (PCD) for a specific wheel, unlike other wheel manufacturers.

[@jawnsr]

I'm getting ready for my first car, which will hopefully be an Integra, looking to put some Rota Slips on it.

[@blasianboomboom2006]

In the Philippines, there’s a saying: “Gaya Gaya Puto Maya!” It generally means “copycat”. So don’t be surprised when things coming from that country are imitations of the original yet they can’t come up with their own. Just saying from experience living there.

[@utahar9898]

Ssr wheels please bae?

[@FitmentIndustries]

Added to the docket ;)

[@ShitCoinerPRO]

Fitment Industries ganggang 🤙🏽🤘🏽

[@allen5202]

Thank you for this man! Subscribed coz of this! Mabuhay! GawangPinoy numbawan!

[@701garage]

Cant find some rb-x 17x9 -13 4x 114.3 and 17x9.5 -19 4x114.3. Every where I look they want so much for shipping

[@FitmentIndustries]

We might be able to help with shipping! Shoot us an email at [e-mail] and we can help you!

[@Rileymoore36]

The first 30 seconds had me so weak😂😂

[@siramikvarze9402]

I have Rota GT3's on my shit box and I've hit potholes like a mother fucker, live on a dirt road, launch, do burn outs, etc.. and they've never taken any damage. Not a single crack, dent or bend. If you're looking for some decently strong wheels for just about anything that are also pretty lightweight and super affordable: Rota.

[@emin86]

I currently live in Japan and want to ship my car to Germany real soon. The problem is, I have legit TE37's on it. Super light weight, did Gymkhana with them, no problems since 2006. But once imported to Germany, the wheels have to go as they are not legal in Germany. Missing papers about the structural integrity. Rota's are allowed, as they can proof the integrity with tests and PLM.

[@FitmentIndustries]

Really 😯😯😯

[@emin86]

There is no heaven for car lovers on earth. Japan has awesome cars, but toll roads and parking is expensive. Germany has the Autobahn with long sections of limit free driving, but castrates every car lovers dreams with strict rules, the US have the 30 years import rule, nearly impossible to get RHD cars on Dubai roads (unless you have influence as it seems.)

[@KingOath]

Australia has super strict modification rules, expensive parts, poorly built roads, expensive fuel, car destroying weather, and a huge negative social bias towards modified cars, but the good thing is that outside the cities there are so few police for such a large amount of land that if you are sensible about it, you can pretty much do what you want and get away with it

[@Rebecca_The_Dragon]

Do you sell Rota? all the sites that sell them are super sketchy...I would love to buy them from you.

[@emin86]

It is really hard to find the 20% difference in Rota Aleica and Hayashi Sakura's, but yeah.

[@moneyinthebank14344]

2:49 and 2:52 were actually rota's?

[@FitmentIndustries]

Yepp!

[@nafeesishraq007]

One of the best intros i watched

[@FitmentIndustries]

ayy!

[@redmeer9155]

Very interesting videos!...... Currently running volks gts 19s on my supra but i want to go for 18s....rotas or Xxr?

[@FitmentIndustries]

Rotas! Upload your ride to our gallery! 👍bit.ly/2Ma4oca

[@jakeiswayblack3377]

I don't get the hate, honestly. There's only so many designs you can come up with that would be structurally safe, and there's been thousands upon thousands of different wheel designs already. A 20% change to an existing design is probably way harder than it sounds.

[@hf2848]

Rota is appaerntly Filipino,I am so proud

[@jowensblack48]

Anyone know what the gold wheels to the bottom left of him are.

[@TurskoVideos]

Love my Rota's. Been a great wheel for a few years.

[@FitmentIndustries]

What do you have them on?

[@TurskoVideos]

Fitment Industries 2014 Ford Focus ST

[@antoniovasquez8762]

Where can I buy a set of Rota wheels ?

[@FitmentIndustries]

Shoot us an email :D [e-mail]

[@DynamicistDante]

replica wheels are replica wheels... end of story. Buy it if the price is worth it to you... If you want to support the manufacturer for making quality stuffs, buy the real deal.

[@FitmentIndustries]

That's always up to the consumer, right?!

[@DynamicistDante]

YES haha people get to buy whatever they want to buy with their money. That's the whole point of freedom!! lol

[@extrahourinthepit]

tbh I'd rather support myself by not starving to death to get fancy wheels, but of course you could say that's self-centered of me. If you have the money to do it and want to, no complaints will come from my way. Though I'd like to remind that if one decides to hate on those who don't support the manufacturer for making quality stuff, he should for the same logic hate on those who buy used.

[@BZA_]

What about tenzoR wheels?

[@BreeZy11s]

I miss my rota c10 (Mugen MF10L) I even had them painted white with the Mugen stickers on my em1 😂

[@FitmentIndustries]

Drop some pics in our gallery! www.fitmentindustries.com/add