These Mods Will RUIN Your Car...

[@FitmentIndustries]

Have you had any experience with these mods? Tell us your horror stories! We have some awesome deals in time for the holidays! 🎄🎅 www.fitmentindustries.com/holidaydeals

[@barronshelton5801]

love it guys u need to get 1milllllllllllllll

[@waluigigang9998]

Alex the type of guy to wear a Donut Media merch in the next video.

[@dxrtbvgtattoo]

Greatest comeback of all time. Alex’s hair line. ✊🏿

[@mevans4408]

My man

[@FitmentIndustries]

Leave the mans alone 😂😭

[@mevans4408]

@@FitmentIndustries it’s all love tho.

[@2010ngojo]

"sponsored by Keeps"

[@JamarcusWilliams884]

deadass if he promoted a hair product i would invest

[@Suzuki-SwiftSport]

As a car, don’t cut ur springs please. Save up for another month and get those MAXPEEDING rods, so u don’t go flying into a ditch cause u went 20 around a corner

[@coltoncrawley2879]

My si is on cut springs and it’s literally fine if you take your time and measure things so that you cut them evenly, doesnt shake or ride that rough at all and i can throw it in corners all day long lmao

[@FitmentIndustries]

Please don't actually get those. Quality coilovers come in right around or just under 1k that won't snap in half (yes we've seen it) . Lowering springs and upgraded struts are the move if you're really on a budget or don't want as stiff of a ride as coils. If you guys want we can put some coilovers though their paces to show you that you get what you pay for more often than not

[@FakeF8X]

@@FitmentIndustries can you please do that?

[@JamarcusWilliams884]

@@FitmentIndustries sounds like a great video idea actually

[@heroichitsuji]

@@coltoncrawley2879 nah fuck that. Seriously just save up some cash dang 🙄.

[@alikhalid6884]

I feel like not enough people don’t understand how dangerous it is to get a quick release without a bucket seat and properly mounted harness .

[@nickdiaz8127]

@@vic2982. because getting a quick release means no more steering wheel air bag

[@redlight3932]

I don't have airbags

[@alikhalid6884]

@@vic2982. if you get a quick release and you don’t have a proper seat and harness you’ll hit your head on the steering wheel if you crash which would easily kill you due to the lack of air bags.

[@randomaj237]

Bold of you to assume my car came with air bags from factory

[@twrcrew8852]

ahhh so you mean everyone understands then. that's a good thing if not enough people don't understand. which means they do understand.

[@bradstuhr9831]

Well said brother. Buy it nice, or buy it twice. Keep up the great work fellas.

[@FitmentIndustries]

Well said!

[@jlr194]

Don't make it rice lol ☺

[@christopherhernandez78]

Wow I can agree with someone in the car community for once.. do it right and anything excessive is stupid.. bruh.. definitely keeping my interior intact now.

[@jdm603jake]

7:20 as far as steering wheels.. a lot of people buy the $40-50 eBay wheels with the SWEET JDM wakaba leaf horn button that come with a quick release and then the $12 hub to fit their car.. however there are some cheap priced alternatives if you can't afford an NRG or Nardi, DnD is one of those companies that actually have some pretty reasonably priced wheels, hubs, quick releases, and other interior bits.. just do some research like Alex said. Be safe and be smart out there guys! And take pride in your ride and the parts you put in it

[@jonwallace6697]

Worst car mod I've done is tint. For the first time building a car and taking care of my daily, tint was the the first thing I did. I think I did a decent job all things considered but with tint or wraps, it's best to leave it to pros.👍

[@curtisdickson6277]

Ole boy with that steering wheel that came off while drifting. Lol. Omg that was hilarious he grabbed the hub and tried to steer. Im dying over here 😂

[@MarksterC]

worst mod: stancing to the point your car scrapes on a leaf. As cool as low cars look, make your wheels sit at a huge angle is ugly and destroys your car. I legitimately do not find people that do excessive camber (a reasonable amount is fine) to be actual car people, cause if you loved cars, you wouldn’t be literally destroying them, would you?

[@Kev27RS]

💯

[@deej628]

Just a way to express themselves. I’m not a fan myself but I don’t hate on it.

[@Kev27RS]

@@deej628 express themselves to get all their needed attention...

[@ButtKickersReviews]

Donald Johnson No, it’s not self expression; it’s attention whoring.

[@khrai2763]

Shut up

[@jamiepotgieter]

Thanks for the feature 🙌🏻🙏🏻😂 I 100% don’t recommend cutting your springs

[@FitmentIndustries]

No worries!

[@MetalHipoKiller]

I look at cars the same way I do with tattoos. Its going to be with you for life and you will get what you pay for. If its cheap its low quality(more money to fix over time), if its expensive youre getting quality that lasts.

[@penggvang7]

Reason why I haven’t swap the steering wheels 👍 safety above all

[@1atinlove]

Holy! Butt Cheek! FLEX! BATMAN! That guy was mid drift, with a steering wheel in one hand and reaching for life with the other......wow!

[@Pekoe.]

Sad boy broken hearts will ruin your car especially if you drive a honda, or Toyoburu Fr-gt86z

[@infadelakainf]

I’m glad you said audio. I almost burned up a few cars taking shortcuts

[@lazygamer9751]

I hate Hondas who cut their exhaust off at the flex pipe

[@scottoleson1997]

I bought an ef sedan that was like that last year. It was so loud on the freeway, I actually got hearing damage. The only cool thing was hearing the backfire all the time

[@lazygamer9751]

Yeah but sometimes it can sound like a soda can on a bike

[@albertzamora1931]

1:26 is that my wheel ? 😫

[@Hachi501st]

8:15 moral of the story is "Poor man pays twice"

[@Jay-iw5bn]

What a great time to do a "We'll Be Right Back" 👌.

[@elivestin5353]

Key point here is> Do a huge amount of research BEFORE you do like anything. If you have done your research and have basic skills. You can do most work yourself. Instruction videos do go a really long way.

[@nicholassauce3939]

Dang I feel attacked about the harness part. Though, I agree things annoying for daily use and makes looking around harder. So I only run them at the track now.

[@tonzofelephants1196]

How about that cheap turbo that "spins just fine" on an engine with stock ring gap

[@TheRealDemocat]

somewhere sandwiched deep in between all the endless rambling and shameless plugs of every Fitment Industries video there is about 3 minute video that's actually worth watching

[@hyenapeacekeeper2220]

Giv bronze Artisa Artformed Elders, bronze wheels on black cars looks CLEAN

[@TekkengodJets]

Just watched the fitment industries oh so you wanna 350Z🔥🔥💪🏽 my mother just gave a really nice 2006 350z made in Japan let’s goo

[@ericlewis5035]

Shoutout to Lowglow. Lowglow the World

[@ThatWhiteGLI]

Was waiting for fender rolling here

[@SublimeC88]

Alex is right I love seeing the guys and girls with RAYS or HRE’s straight flexing some knock off tires… #Sunny’s #MuchoMacho’s Hahahah

[@Xx760ImpactxX]

🤣🤣 friend : What kind of tires you have ? Owner : Oh I got Michelin's🤥 Friend : 👀those ain't Michelin's bro Owner: Yeah they Mucho macho's 🤫 but I keep them clean

[@Jack-wy9sv]

Liking the video to SUPPORT the wheel slaps ✊🏼

[@FitmentIndustries]

❤️

[@ChrisChaos209]

More of these types of videos pls.. need less ricers on the streets lol

[@vt5speed272]

Just ordered my first set of wheels and tires off fitment industries earlier this week!

[@MrA42000]

Saw an episode of Bitchin Rides where the owner told the worker to cut the springs on a client's custom truck. I almost spit out my drink.

[@turbo_tacozx118]

What happened to driver to driver, best/funny idea you guys had😆👌 p.s love the content

[@senowobe4552]

Wheel recommendations for 93' civic??

[@mr.mopedmadness3441]

Needa get em some good wheel slapping gloves 🤣

[@FitmentIndustries]

👀

[@vincentking8267]

You forgot to mention the underglow installations where you can see the physical LEDs. If you can see the light source, it's automatically a bad mod IMO.

[@ProzrForCutie]

Hey Alex, I challenge you.... to say at least once. In every video from here on out. To say “a couple two tree things...”

[@PANTYEATR1]

Love the Eric Andre commercial break💪😅

[@BeachCatzdrift]

I see so many losers and actual buffoons floor mount their harnesses and it just makes me laugh because I know they’re losing brain cells every time their car compresses or they go over a bump. Every time your spine just gets a little more crunched up😂

[@ZBerd_leNZ]

Yo who edited this! Just the intro was bomb!

[@pwnzlikeme]

Roll cages, quick releases, and harnesses are dangerous. You REALLY need to have all 3 to make any of them safe, and even then they aren't as safe as standard equipment for regular use, as they are designed for having a helmet

[@josephburkhalter1985]

He hit us with the dial up vibes

[@grand04gt]

I used to have Future shop install my audio system and then saw the crap work they did and went thru and shortened wires (so there was not 10 feet wrapped up behind the dash) and soldered instead of crimp connections. Basically make sure any modifications are done right and do it SOLELY for yourself and enjoy it. If you like it and others do not that is perfectly fine and is what makes modifying the car your way makes it enjoyable and really your car

[@faxxzc]

I would not put solder over crimp, if you put a soldered wire in a terminal, if theres a lot of current through it it can melt the solder and slip the wire out. Cant happen with a proper crimp connection

[@grand04gt]

Soldering is superior to a cheap crimp connector and it would take an insane amount of heat (which would blow the small fuse) to melt the solder like that. Also if you tie the wires together before adding the solder as well as heat shrink it will not come undone easily

[@briansmith9348]

Recently blew up my 350z because I supercharged it. My fault honestly for not rebuilding the bottom end. You live and you learn I suppose 😒

[@ValenThePowerful]

just do a swap. I have hear the engines on the 350z are not really reliable

[@DaytonaRoadster]

Why did you think adding forced induction to a stock block n/a engine was a good idea?

[@ValenThePowerful]

@@DaytonaRoadster you can add boost to a stock engine but the amount of boost you can add is very limited.

[@DaytonaRoadster]

@@ValenThePowerful yeah, 0 psi

[@briansmith9348]

@@DaytonaRoadster online "where everything is true and everyone is an expert" people have been successful going FI on a stock block I took my chances knowing I planned to do a rebuild next year. It wasn't a great idea and like I said I've learned from it. I'm not mad about it, making bad decisions in hindsight is part of this crazy hobby/culture we live in.

[@Steve-cq2cj]

So I didn’t cut my springs but I am on lowering springs with stock shocks

[@kidddmikeeg849]

How does it ride?

[@EliasRizk53]

Me too

[@Raven-uu7lb]

Just admit it... We all have done at least two of these mods lmao 🤣🤣

[@magixzgang1686]

Not yet hopefully 🙏

[@MartinsGarage97]

Okay sound system wiring is "easy" but it can be dangerous. Having a wire from your battery that's always on you need to make sure nothing rubs on it or you'll start a fire.. inline fuse good god inline fuse it. But I would suggest a actual circuit breaker. That can be flicked off and on

[@EatMyPropwash]

Who here is old enough to remember when AEM released a cold air intake that was placed, and looked exactly like a front mount intercooler? 😂

[@ethanwitmer7307]

The good old interfooler

[@friscostreetstories5403]

An unpainted body kit. Terrible. Like just the front bumper? Or getting rid of interior because you want to loose weight, and the car isnt even that fast. Stickers, too many stickersssss. People still cut springs? And people still run stock shocks on a lowered car? I agree with Alex, a harness on regular seats is tacky as hell.

[@RobiticDuck]

[Intense digital music]

[@kaypolplasco]

i want a rally look on my 2007 is250 with fender flares. What is the best wheel fitments?

[@MrLunah1]

Any wheels you would recommend for a mazdaspeed 6?

[@FitmentIndustries]

Enkei NT03M 👌

[@pandamoto]

Basically just watched the whole video just by looking at the thumbnail lmao

[@curtisdickson6277]

I want more Minnesota accents! Come on man!

[@lorenstickler4482]

Dude this shit is getting super good. Keep it up fam!!!

[@andypacmanperez]

Just watched all of the Matrix movies and the Animatrix today. Can't wait for the new movie. Hope it doesn't suck lol

[@MrJamesshipman]

My worst mod was a performance "turbo" back exhaust for my Toyota. Absolutely no gain in power just a lot of noise. Oh people thought it was way faster though, including cops would pull me for going 20 miles an hour in the school zone because they thought I was doing 60. ... So loud.

[@abstreebee]

What toyota did you have?

[@nomajhondeere3324]

Cut springs are better then those ebay coil sleeves in my experience

[@EAADetailing]

Alex is literally Steve from American dad that likes cars

[@0thatperson0]

Would Konig Tandems look good on a Veloster Turbo (2nd gen)

[@aaronhancock9864]

Fellow Veloster owner here (2nd gen). Not my taste, but you might dig them!

[@PhatRamenMedia]

I personally think they’d look good, I’d love to get some Konig for my 8th gen accord 👌

[@0thatperson0]

@@aaronhancock9864 do u have aftermarket wheels? I'm trying to find something I like and looks good on the car. Not much on FI gallery

[@agentbahan397]

JuSt So YoU kNoW I cLiCkEd FoR ThE sUbIe ThUmBnAil

[@lukesites2457]

Im putting harnesses in my street car because I only use the seat belt when I'm doing sketchy shit anyways lmao

[@MrLovezkim]

Watching this reminds me how I hate it when people got new awesome wheels, but the tires are like cheapest of the cheapest and almost 10 years old

[@thegarbear05]

Keep slapping

[@cloutlxrdgaming44]

i still don’t understand quick releases in daily cars, it just removes so much safety and features of the car

[@losv8415]

It’s too expensive to do it right but it’s worth it in the long run 👌

[@ጽጽ]

The production OVERLORDS please bring back the background with the wheels, it gives the video character ... this was kinda plain

[@sirloin4372]

I have underglow on my summer ride. They are encased in silicon and the they have an aluminum casing. Very bright and looks amazing. I like the Bluetooth functionality also. I have interior led’s also and led in my grill and air intakes on lower bumper. I also swapped all of my OEM map lights door lights etc with dark blue leds.

[@lilblingking1491]

Drop your insta please

[@c_vanwyk99]

@@lilblingking1491 same

[@air-headedaviator1805]

The only kind of mods I want to do on my car are the mods that there is little information about. Absolutely nothing is out there for adjusting steering feedback.

[@ianhairston5258]

Strut tower brace?

[@ButtKickersReviews]

Caster settings, steering wheel size, and rack pressure all contribute to steering feel; as does tire choice, camber settings, toe in/out, etc. There’s plenty of info out there; you just ain’t gonna get it here, or in some corny Facebook group

[@Fakedrabbit]

What’s the song called in the video background? Towards the end of the video

[@HatsuneM1ku01]

Can you do a video on avid 1 wheels

[@ssamcobalt4956]

Pristine edge

[@Icecreameliora]

I call it the My buddy said he can do it cheaper

[@javonteshavers4388]

Random thought, pointless to put a lift kit on a new truck but older makes more sense to be more practical

[@bunnyboy324]

What are good wheels for the MR2 I need help lol

[@caseyrenner2061]

Bro here’s the deal you have my sub but the day Dakota stops the wheel slap and fist test is the day I pull my sub….. yes it means that much lol jkin

[@androidpg1535]

Yeah! Never go by the "I know a dude that can do it cheper." Don't do it my dude.

[@kondwanichikuka2396]

make a video for paramagmetic paint

[@itsKeMonte]

Y’all should’ve added excessive camber 🤢. That can also ruin your car if installed improperly.

[@rex_5012]

Especially if its more than 8° 🤮

[@evoevannismo8141]

I actually took some mental notes watching this video Alex because within a year when I buy my dream car and then try to actually build it, I want to make sure I buy the right parts from reliable brands. Better yet if I absolutely need to buy used, I will literally do my research first before I jump the gun.

[@j4wj2w]

is manual swap worth it

[@feta8939]

No to much money and time. It’s cheaper to buy a manual car

[@xL0stKIlah]

I wish their were more independently owned car dealerships

[@NotoriousFK8]

Feels illegal to be this early...

[@OriginalAse]

WORKSBELL 🛎

[@jimmyjames1411]

Cars to mod: Civic, Miata, accord, 350Z, and older Z’s except new Z or Fair lady Mazda 3, eclipse, and BRZ Not to modify: S2000, , 300Z, challenger, mustang, challenger, Supra, or last model Evo. Mods will make the car worthless bc no one else wants your mods and will cost them more to remove and go back to stock

[@dakotajohnson5009]

You should buy a car to do what you want to it, not for the resale value. No need to gate keep my dude

[@Mjgot2010]

Beans

[@ahronmitchell3888]

On NHC u got a subscribe

[@carbonkings6272]

I’m trying to find someone to cage my truck so I can run 4 link long travel king shocks suspension on it I have the rear shocks I don’t know what to get for the front I want to stick with king but the main problem is I can’t find anyone to weld a solid safe roll cage I just don’t have the time to do it my self and I don’t know what I’m doing

[@yosammy1746]

Ricer slap-ons are not mods. Change my mind.

[@ongodachristianpodcastbyjo1413]

What’s the name of the intro song lol

[@jairoaguilar3838]

Sage advice

[@ultraguy8771]

Day 317 of asking for "So you want a VW Passat W8".

[@lobbyrobby]

I'm in the process of modding a car I bought several weeks ago. Let's see how many of these I get !

[@julion6441]

Noti gang 😤

[@magixzgang1686]

What offset wheels do you recommend for a Honda sedan civic DX 01 ?

[@MrGman636]

Stance is the #1 way to ruin your car.

[@TedsApex]

where are my tires. Y'all took my money and never delivered it

[@mavr1ck_garage]

Best buys don't do installs anymore. At least the ones around here don't

[@yadidareddyable]

Rolling fenders smh