Fitting 20" Rotiform Wheels on a Mk4 Golf! Will They Fit?

[@mrwilson7769]

That's one a the nicest wheels I've seen on a mk4 👌🏻

[@Mexicanfab]

It really is!

[@Tight--LiNeZ]

I know CCV's are Heavy, but I just feel they suit a Golf so much better. Or Radi8 R8T12's

[@Mexicanfab]

I’ve got CCVs in my Sclass. 👌🏼

[@red9zero]

They actually look pretty good !

[@Mexicanfab]

Yeah. I’m pumped. Defo will get them in for a bit in the summer.

[@MrJackman83]

Those sit really nice

[@robw1927]

k, let's do a test on bumpy blackpool roads!

[@MrMartyn1212]

How much drop do you have ? How does it handle/drive Looks really nice brutha

[@Mexicanfab]

Thanks. Car drives great. Tyres makes things a little harsh. Car is on H&R springs, and Powerflex top mounts. kzbin.info/www/bejne/eoC5noinlrV5oKs

[@SCMOTORTREND]

And here’s me worried about 18ns 🤣. But hey what about these bad bhoys. They look fkn superb ⭐️⭐️⭐️⭐️⭐️😮‍💨

[@Mexicanfab]

I think 18s are perfect for these as an all rounder look and usability. Check my other video where I get a set of 18s on the car.

[@lucmonette]

i need that exact same set of wheel spacer. i know you said from a TT but i would like more detail please or a link. thanks

[@Mexicanfab]

These are 20x8.5 et45 with 20mm spacer. So making them final et25. They now live on my friend Alex’s S3. kzbin.info/www/bejne/g5DcgqGko5x7pNEsi=M4ywO2zAJVFnrVeP

[@tamsingroves]

Can I just put 20” strait on with no spacers? What size tyre? I don’t know much but The wheels i want are 20” I just have a basic mk4 tdi ans rather not use adapter/spacers

[@Mexicanfab]

You’ll need to work out the offsets/fitment. Only reason I used spacers/adapters was because the offset was too high for this platform (as they came off my mk7 golf R), and the bolt pattern wasn’t right. So the adapters sorted that out.

[@tamsingroves]

@@Mexicanfabhi sorry to bother you again. But Iv finally found some wheels I really want. Problem is is they are 5/112 19rim and they are 9” wide and I don’t want a stretch tire look. So I’d want 235/35/19 I think? No idea what adapter/spacer thickness I’d need(min poss)These are the wheel speck. Will it work with wide tires? 2019 Genuine 19 Inch AUDI TT Alloy Wheels Rims 5x112 9J ET52

[@Mexicanfab]

@@tamsingroves You’ll struggle with that tyre size if you want to lower the car much, but if it’s only lowered a little it might work. As for adapters, I would go probably 20/25mm. As they are 9s, you need to check inner clearance. Mine were 8.5 et25 after the adapter to give you a bit of guidance.

[@tamsingroves]

@@Mexicanfab sorry didn’t see you replied. My car isn’t lowered. Will it look stupid if not lowered?

[@Mexicanfab]

@@tamsingroves it’ll just look really high. Lowering springs will be enough.

[@klepTeevee]

You deffo had a nice joint before filming

[@samuelsitrakarandriamiahar2364]

Hello, wht’s the color code of this car pls ? Thanks

[@Mexicanfab]

Hey. I don’t actually know the colour code. But it was a very popular grey for the mk4.

[@littlereptilian7580]

Love that V6 engine mate

[@Mexicanfab]

Yeah. Such a good engine.

[@littlereptilian7580]

@@Mexicanfab is yours auto transmission?

[@Mexicanfab]

@@littlereptilian7580 Nah, 6sp manual.

[@Stancesociety6828]

Yo bro this looks fkn Dope have to say…and the fitment is solid🇩🇪🫡

[@Mexicanfab]

Thank you G. They are now on my friend’s S3. Check out @playerstv KZbin for the video on it. 👌🏼

[@sigsanchez9823]

What are the MM thinkness on the adapters on the Audi wheels?

[@Mexicanfab]

TT wheels has 12mm spacer on the rear only. The 20” Rotiforms had 20mm adapters all around.

[@SCMOTORTREND]

How’s the BiGwheeels been ? 🤣💚🙃

[@Mexicanfab]

Only trialed them, but @Taxi_ on IG has them on his S3 now, so maybe ask him. I think they look amazing.

[@MegaCoach1977]

Do you have coil overs on it?

[@Debodan]

Was wondering this aswell holy fuck !!

[@Mexicanfab]

Yeah. They work really well.

[@sicario2234574]

What size spacers are the one you use for it?

[@Mexicanfab]

Used 20mm

[@raidesboules2253]

The size of the wheels are 20x9,5 right ?

[@Mexicanfab]

20x8.5 👌🏼

[@raidesboules2253]

Thank's you, how much did you downside the coilover you know ?

[@Mexicanfab]

@@raidesboules2253 car is on 35mm H&R springs.

[@RiyaanVolks]

Buddy those wheels are more than the car like why wasting your money

[@Mexicanfab]

They are wheels I already had from another project. Plus my mk4 4motion was longest service car on the fleet.

[@maryannepaul3978]

Whats the offset? Et35?

[@Mexicanfab]

Wheels were 8.5 et45, with 20mm adapters, so final et of 25.

[@Jerry_021j]

What’s the tire size ?

[@Mexicanfab]

These were 225/30/20s

[@RobertDavisAdman]

It’s a four door. :(

[@Mexicanfab]

Yeah. Because for the last 12 years it was my daily. But I agree, it would be better if it was a 3 door and it would have been if I went out my way to buy one to modify.

[@RobertDavisAdman]

@@Mexicanfab Don't mind me. I have a pet peeve about VW discontinuing the 2-door (or three if you prefer). A true GT car by definition is a 2-door. I just hate that you cannot get a 2-door even if you special order one. G'rr. Your car looks fabulous, of course. :)

[@Mexicanfab]

@@RobertDavisAdman I totally agree, but you could see it coming with the mk7 and 7.5, how VW were preparing for the end of a 2/3 door golf.