Fitting 3SDM custom wheels to my GT1 Murcielago project.

I show you the quirks of fitting the 20x13" custom 3SDM wheels to my GT1 inspired Lamborghini Murcielago. And show you some of the complicated machining processes. You've heard of deep concave wheels. These are next level 'hyper concave'
►Complete Lamborghini build playlist: • Driftworks Lamborghini...
►Follow me on IG @PhilMorrisonDW & @driftworks
►Subscribe for more! bit.ly/2k6oBqh
Did you know we have a gigantic online wheel and suspension shop?
►www.driftworks.com/
►Check out 3SDM here; www.3sdm.co.uk/
#lamborghini #murcielago #3SDM #GT1 #supercars

[@alexoehler1]

I think original GT1 air jacks would be a great idea to make jacking up this car super easy

[@adogmcdizzle]

With little castors on so they can push it around in the workshop 😅 and an easy forklift point 🤣

[@harryshort2281]

Phil used to have these on his dw86. And I think he's pretty much staying as far away from them as possible 😅😅

[@NitroNuggetTV]

@@adogmcdizzle I love that idea hahaha

[@UnlistedBio]

Love the idea but will Phil go for it and the extra weight of gear to make it work? Maybe larger air jacks on all four wheels incase he spins off on the track into dirt and needs extra ground clearance to get out of the kitty litter.

[@Urchfab]

I've never been much of a Lamborghini fan, until today! Hats off to you Phil, that thing looks incredible.

[@Matty.Hill_87]

Same man, never been much of a supercar fan but this things on another level

[@RTSRAZORBACK]

Two things I'll never get tired of seeing: 1. This absolutely *mental* Murcielago 2. Phil using a forklift to manoeuvre it around and jack it up 😂😂

[@UnlistedBio]

Hey Phil, you were so right with the front rims call to remake them, it wouldn’t have looked right with the first three piece rims. Love the detail for the inner valves. How’s this for an idea: Remaking the caps in aluminium with a custom magnetic insert for cap on a rubber dipped (scratch proof on the rims, colour matched to brake calliper) custom stem tool. This would allow for hand twist off of the new caps. Thinking hex or torque bit design that wouldn’t fall off due to strong magnetic clutch.Then just make another custom tool air pipe with rubber / plastic colour matched dip to give you a height for rim clearance and 90 degree bend to allow for quick air fill via horizontal push (well clear of your sexy rims). Do you really want to remove each rim every time you want to top up the air? There are no problems just opportunities to flex your OCD / 3D design and printing skills. I also see flush floor lift air jacks in your future ;)

[@rayhaanf]

A V8, V10 and V12 all in that last shot, a spectacular collection of engineering marvels. You'll have to get a V6 into something soon. That Murcielago is breathtaking.

[@driftworks]

Cheers. I'm not a big fan of V6's, but I do have one in the Macan GTS.

[@rayhaanf]

@@driftworks A rather nice space to have one.

[@GaIvatr0n]

Hit like before I’ve finished watching. Your ocd manifests into magnificence always Phil. Inspires me in my own profession and life.

[@ssoffshore5111]

Phil, this is the first time I've seen it basically finished... IT LOOKS EPIC!!! Brilliant job mate!

[@davegavin7914]

Wheels look as we have come to expect stunning !

[@Dudeiculas]

Best lambo on the Web by Miles

[@AcidexLink]

Best looking Lamborghini ever.

[@jamest5149]

Got to agree, the retropower channel is a great watch, love their projects and their Friday update/walk with bovine juice 👍

[@anthonygibbo1881]

Phil she was never gonna give it to you easy bro you a legend for this build and all the guys that made it possible 😂😂😂😂👍🏽👍🏽👍🏽👍🏽

[@kona328WH]

Mad levels of effort. Love it!

[@eko89er]

Loving the slew of Murci content! Thank you!

[@GoGringo]

I watch a LOT of car builds on KZbin, this is easily one of the finest. Well done to those involved.!

[@leecs3]

MJ Interiors! Michael the only person i know that can trim poles positions and wingback and keep the leather tight with no wrinkles near the harness holes

[@David_Conant]

Such a work of art

[@tian320i]

This car is every boy's dream! It is gorgeous

[@Bravo955]

Funny you mentioned the retropower guys when I was just thinking the same thing

[@cavallorojo]

unsuscribed from Vehicle Virgins today and subscribed to Driftworks....Real Car peeps right here! That Murci...wow I fell in love with it on Insta!!

[@kmc7355]

Yes Dw. Mucho content lately. Thanks. That email you got from the designer of the Murci/RGT must have made your year already.

[@GearJonny]

Where is it mentioned? ( that email )

[@kmc7355]

@@GearJonny philmorrisondw instagram

[@carmakeover2724]

Did nt expect anything less from Phil, it’s up there with the best 100%, absolutely awesome creation 😍😍

[@MattGreenland]

I love the return of this content!

[@oliversmith1798]

have to say the paintwork looks amazing well done gaz on that

[@jamest5149]

Love this build... wonder what will be the next new project Phil. Cannot wait 👍

[@hevendranarayansamy2793]

Love the choice of wheels

[@stevemarr9295]

You've got to keep Jay warm & happy!

[@glovesguy1936]

those wheels look insane

[@Ricky-cl5bu]

Amazing car them valves woooo unbelievable

[@maverick4177]

Having air jacks designed into the build would have been a stroke of genius perhaps?

[@Matty.Hill_87]

They messed around with those on the dw86 and got rid of them

[@Woodie-xq1ew]

@@Matty.Hill_87 was that because they were crap or because they weren’t allowed to use them anymore? I know in formula drift you can’t use them but Idk about BDC

[@Matty.Hill_87]

@@Woodie-xq1ew haven't got a clue in all honesty I can't remember

[@driftworks]

Airjacks are a massive ballache.

[@vipecrx]

@@driftworks that's saying a lot for someone having to use a pallet lifter to do the tyre pressures!

[@Nunnn92]

retropower, driftworks mashup would be awesome

[@omarreyes8722]

Them work M1R are fire though 🔥 😍 👌

[@thedrvn]

How that robot see's with all that water I do not know! Amazing technology

[@shalomMF1995]

I can highly recommend inspire automotive for trimming work, Sean has a really good eye for detail and done some amazing full interiors

[@endeavour2127]

Awesome!!!👍

[@neilbauer67]

Phil this car is epic 🔥🔥🔥

[@colinmorand129]

You guys should look into a hvac system for the workshop, will make it alot more comfortable and productive 👍

[@Matty.Hill_87]

The process of those wheels being made is fascinating, could watch billet parts being machined all day

[@nigelfox6683]

I bet the guys at Calibre are looking forward to getting some protection on the paintwork for you Phil... this things just mind blowing!

[@carter83419]

Retropower are artists Phill, give them a shout 👍🏻

[@bakedbeanzontoast9078]

"There is a budget" ...... really Phil !!!. Fantastic Murcielago btw.👍👍👍👍

[@altypeRR]

I went to school with Dylan! He is a top bloke snd his wheel designs are amazing.

[@deerpeter1]

You really do not make life easy on yourself. But there's no shortcuts too perfection. Awesome as always ✌️

[@meandthefamily1485]

I also thought of airbag jacks , might help to give you the needed clearance ,but Phil knows his stuff , beautiful vision mate and those rear wheels are sublime 👌

[@BurpleRX7]

Retro power guys are awesome, would definitely be my first choice, we move a lot of there cars and there attention to detail is second to none but more importantly they great every vehicle as if it’s the only one ever made

[@johnrowell942]

Fantastic rims

[@jamest5149]

Get Craig to to make some jacking points that use the splitter and defuser sandwiched between a jack pad and a backing support frame as close to the front and rear of the car, will make your life a lot easier especially if you have to jack the car up and remove the wheels to check your tyre pressures 👍 Other option would be a tube jack point that pass through the sills and pick up on the chassis... if you place them towards the rear (weight) one point should lift both the front and rear wheel up at the same time... same as the GT3 👍

[@congvu4545]

very nice wheels

[@driftworks]

Thanks

[@glengrandy2378]

That would be awesome with GT1 air jack system 👍🏻👍🏻👍🏻👍🏻

[@AR-qr9eo]

Very nice

[@rhys.t0075]

Seeing metal threads and a metal cap reminds me a lot of how many metal caps gets seized on this time of year every year

[@janehuzrad2603]

car is next level! but I love the front wheels you weren't keen on haha they look soooo sexy

[@dukeofbork]

Lawrence Grey of LG Trimming is a master

[@blackinblue11]

Maybe if you lift it 5mm is a solution for the fitment, and maybe just maybe could actually drive it? Phil: Right right yeah, it needs to go 5mm lower. LOVE IT!:)

[@grindsman22]

Those wheels are really good looking, I hope 3SDM start offering the forged version alongside their cast aluminium model, I expect there's a big weight saving too.

[@excaliber32]

Hi Phil. I work for jlr and if we need seats trimmed we use Aldridge trimming there really good.

[@keithflynn5651]

Pumping those tyres up looks like a faff! Wheels look great though 👍

[@technique275]

Look great. The valve looks a bit of a nightmare though. Looking forward to the next installment. Atb.

[@blackinblue11]

But then again, Phil is a savage and likes nightmares:)

[@mrmoss149]

I also am impressed with Retropower. Give them a ring.

[@kingcal1991]

Literally living the car guy dream

[@simonh3807]

Looking stunning Phil, any thoughts about installing some PPF?

[@spazda_mx5]

I've got a Tillett seat in my MX-5 which fits even though there's a full cage with door bars, might be worth a look unless you're committed to having Recaros. They aren't much use for pie eating enthusiasts tho.

[@BadE30]

I know you have the KW hydraulic jack system, but I'm certain air jacks should be a future project!!

[@WayFastWhitey02]

What a freaking car....

[@surenraj6450]

Toitee fitment♥️ Phil, as it is such a faff to jack, would you ever consider pneumatic air jacks for it?

[@mehmetguner5729]

Phil PLEASE put those 3 piece variants on the front... looks so much better imho

[@driftworks]

No chance. These are perfect. I take it you haven't watched the completed release video 😂

[@mehmetguner5729]

@@driftworks I have watched every single video you have posted regarding this build... it’s a piece of art work 👊🏼 Congratulations once again

[@TurdFurgison42]

What a car!! even though it may not work for taking wheels off, but have you looked into a new lift? Jay Leno uses Stertil Koni mobile column lifts and from the episodes I have seen, he can get a very low car on them with the fork design.

[@driftworks]

Cheers. They wouldn't offer any advantage. Our ramp is very low entry. Jay Lenos cars are all off roaders in comparison to this.

[@michaelw4620]

Integrated air jacks maybe in the future?? 🚗

[@derekdok]

Amazing wheel's, is it just the lighting or are there 2 different shades of color on the car? The doors and rear quarter's look different.

[@bowlerwildcatGaming1991]

You might want to start planning your journeys and what roads to use before driving it Phil to avoid all the nasty speed bumps we he here in England

[@jamespink4202]

Brilliant take on an impractical car made every day unusable in the name of style 🤣 love it!

[@mrmoss149]

Those wheels are mega, though. Cheers

[@benclark452]

Phil, If in fact you can't get fill valve adaptor into the wheel with the tyre on, perhaps you can get Crag to "CAN YOU JUST" make you a new adaptor with a 90 degree fitting or something!

[@cliffordlennon]

Try John’s Trim shop for the interior in Bristol.

[@loudcorsagsi]

With regards to the valve, could you make a keyring bit for the valve to go on and that go on the key(s) for the lambo?

[@Woodie-xq1ew]

6:08 that wheel profile reminds me of the IMSA Audi 90 wheels for some reason

[@curvs4me]

I'd mount a contoured foam pad directly to the floor and only use the upright to make the back of the seat. You would have the most room.

[@richarddunt7816]

“ Dave the trimmer “ for interior.

[@michaeldigiorgio]

Might have missed this video but what is the offset on the RRs before machining away at the 15mm extra material?

[@ajinkyakarande5048]

@dailydrivenexotics should check this for a project and try making it sound like a f1 engine

[@mrmoss149]

Yep. You definitely need more of those air filler adapter thingies.

[@merkantelismo]

I suggest putting some loctite on those valve covers. They may cause a bit of damage to your rotors.

[@497adam]

Would jacking wheel dollies work to help with jacking ?

[@madintocars]

20:21 - What happened the skirt just in front of the back wheel? 😭😭 Car looks amazing though! Im not sure ive ever seen anything as mental ❤ Love the channell and content ✌

[@Freshiemaster]

Car looks epic! Pain in the BS to work on though. The price to pay for those looks!

[@hoonaticbloggs5402]

Those valves look like a bad idea. I like

[@GheXagon]

Reaco Pole FIA version (the ones finished on fabric), are narrower than yours ABE They are common in mx5 and small cars because the narrow fitment.

[@imSchwaggy]

13 wide. Ok im going to put similar size rears on my e36 with 315-325s

[@mariusandruska4479]

How much rear wheels weight with and without the tyres?

[@JordonVW]

Obviously a bit late now but my splits made by a company called Braid have a billet centre, they use a spacer that bolts onto the wheel, essentially like the extra material you have got, but I took my spacers off and had them machined to the perfect offset without having to get the wheels sent off themselves

[@driftworks]

That's the normal way to do it. This is the posh way 👍

[@JordonVW]

@@driftworks I'd never seen a spacer bolt to the wheel before, very clever way of adjusting the offset at the factory to suit different specifications

[@michaelgreen6264]

I want to look at my project car when it's done the same way you look at your Lambo now

[@mrmoss149]

Battling a 345 width tire is fun no matter WHAT the temp is.

[@garyhowe4961]

What stud conversion kit do you use Phil?

[@driftworks]

Bimecc parts. But I had to modify the studs.

[@scon2006]

Is that a Lamborghini color or a custom color, cheers, Car has turned out 100%

[@ScottPC]

Looks similar to Lamborghini grigio lynx metallic.

[@driftworks]

It's a custom colour 👍

[@chrisratcliff2112]

Is it too late to fit air jacks...?

[@mrmoss149]

Just a thought- you knew going in the car was going to be really low- why didn't you opt for the air jack system on board- would make life so much easier and add to the race car effect.

[@bigmikes2140]

Maybe nitrogen in the tires is you do have small air leaks to lessen it

[@carlosleandry12]

Why not get the super skinny carbon fiber bucket seats

[@keironastbury9399]

to be perfectly honest id put the original seats back in mainly because if anyone would look inside they would probably think its a kit car build if you get my drift lol, it would look so much better with original interior and less time and money and faster to get to drive this beast.

[@driftworks]

The standard seats are terrible. No support at all.

[@keironastbury9399]

@@driftworks oh right but man that looks absolutely fantastic the best I've seen you've really done a great job there well done well worth it.

[@ironmantooltime]

New years eve, three months ago?? 😂