Fitting 4 diffs to a Lada (ripping the pavement with all of that torque)

Grab some G54 merch here - www.en.garage5...
In this episode we add a ridiculous amount of diffs to a Lada.
Our instagram / garage__54

[@maximilianrpm2927]

Americans: "burn rubber, bro" Russians: "shred asphalt, komrade"

[@Wok_Agenda]

Polish: Kurwa mać

[@NtA..]

@@Wok_Agenda I jeszcze ja pierdol....

[@mmllmmll22]

@@NtA.. "Ja pierdolę, kurwa mać"

[@Zeke___Marsh]

Sorry you mean Aussies burn rubber

[@mateuszk2832]

@@Wok_Agenda W tym wypadku raczej: "ja pierdole".

[@mrkrabsx8669]

This guy never runs out of ideas

[@pyrotank1232]

yes 😂

[@adventurenorth7530]

...and Ladas

[@mrkrabsx8669]

@@adventurenorth7530 yeah lmao 🤣

[@llagona]

They will run out of Ladas before than Ideas.

[@mrkrabsx8669]

@@llagona True af 🤣

[@dragospahontu]

All that torque will make the earth spin the other way😅

[@Monni95]

Newton's third law ;)

[@djdjukic]

"Give me an axle shaft strong enough and a Lada on which to mount it, and I shall spin the Earth"

[@TC-tn9tb]

It can't the earth is flat.................only joking I'm not a nut job earth is round.

[@stephenbrown571]

@@TC-tn9tb yeah yeah and my C wife isn’t a nutjob ether. 😂😂😂😂

[@johnnyrocket6588]

That torque is spinning the earth the other way. You just don’t know it

[@danyf3116]

"Slowest burnout ever!" Words never associated together.

[@tomsterbg8130]

This is a brand new sentence to all of us

[@MrBmxbrawler]

Pretty impressive

[@danielchandler4764]

I don't know, that crackhead down the street is a pretty slow burnout

[@boii446]

I guess this guy just has an infinite amount of Ladas

[@plavins1]

well... they do :D

[@hifiteen49]

well yes

[@silver1fangs]

My first thought when I watched this was it's always a lada

[@luviskol]

They made more than 17 million of them

[@jackmehoff2363]

Volume over quality

[@Dsdcain]

I love how much this version of the channel has grown. I found it back when there were around 14k subs and now it almost 600k. The translator is fantastic, and the content on here is awesome. Just wanted to bring that up. I'm glad so many have found this little gem of automotive carnage produced so well. 😎

[@REexpert44]

Thats the unfiltered power of the Lada at work

[@Turbodelusional]

Better than 10 minutes drag race of 10 seconds supercars IMO

[@beautifulday1665]

Can we just appreciate the guy who's translating here... you're making it more and more interesting, thank you man, we appreciate you.🤗🤗🤗🤗😙😙😙

[@SwapBlogRU]

Hi! Honestly, I enjoy translating these, and the positivity in the comments on this channel is always very gratifying.

[@caralho5237]

i appreciate his work but i'd rather hear the original voice with subtitles who knows, i might even learn russian

[@hrphilipson]

Get a heavy duty axle, mount some tractor tires for traction, pull EVERYTHING on the dirt.

[@snarkygnome619]

Tractor diffs also.

[@635574]

Bruh they mad enough to do that inside that lada. Mad ladas

[@patrickmartin3322]

Then you’d just have a tractor

[@alklazaris3741]

"Look how much damage it did and how little effort it took." wise words to live by.

[@Dia1Up]

"Not that impressive" literally *idling* tearing up pavement at 1.5 tons

[@tomsterbg8130]

Russian standards are something ordinary people can't understand

[@joe125ful]

Than you never visit Russia...

[@codyparker679]

Well here in America we had old pick ups with stupid low gears granny 4 speeds and at idle in 4wd they coukd do that just waaay faster but still

[@DuckSongFan]

That’s probably a pretty shitty road tbh

[@thatsgottahurt]

during diff install: "feel the power... woooweee!" I really hope the "woooweee" was BMI Russian. Regardless another nice video, this was awesome, lol.

[@Lurkerkun]

No, that was G54 guy kzbin.info/www/bejne/qITJXqefmbWYY9E

[@TelmenBudsuren]

you know something good is gonna happen when you hear that “hey there fellas”

[@N.D.J.S.]

😁 exactly 👌

[@michealarburn9861]

DAMN! That's a Lada torque!

[@merlinmagnus873]

That was bad. Funny, but still bad.

[@hell_pike9150]

Underrated comment

[@tetraman5068]

Lololl

[@xxhyjynxx5939]

-slow clap- Well done, man.

[@TheNismo777]

Yikes! So it takes 1.5 tons to break an axle of lada.. Oh maan those cars are build tough!

[@Monni95]

There isn't much tolerance as most passenger cars are designed to handle only up to twice their own weight. It's nothing like tiny tow trucks that can pull big rigs.

[@statementleaver8095]

I'm considering buying a lada niva in Putin spec!! Late Brake Show johnny just reviewed 1 apparently available for 12k

[@TheNismo777]

@@statementleaver8095 absolutely worth it!

[@the_kombinator]

@@TheNismo777 LOL

[@Streeto_161]

No it needs more… if you do the math you get over 13000Nm to break the axle… that is extremely impressive. There was a lot of force on that axle…

[@codynorman7744]

3000 lbs of tractive force is very impressive at idle. I've always said with enough gear reduction you could move a train with a lawnmower engine lol

[@antmk2dreaming614]

Why do you have to convert it into imperial measurement ? God you lot are so backwards

[@Cammi_Rosalie]

​@@antmk2dreaming614 Because we don't use metric. Why didn't you understand what 3,000 lbs meant? Are you backwards for not knowing that? No. Not at all. You were not taught the imperial system of measurements. It's probably rarely used in your part of the world. It really serves you no purpose, so you never needed it, and never learned it. Likewise for those of us in places that don't use metric. It's just not something we are taught, or have to use on a regular basis, and thus, is useless to us. They tried to convert us over back in the 1980's. It just didn't work. Perhaps if it begins to be taught alongside the imperial system in schools, it would catch on. But as it stands now, that's not happening anytime soon. Thankfully, Google clears that right up. 3,000 lbs = 1,360.777 kg. We're not wrong. You're not wrong.

[@ATruckCampbell]

Pulleys and gears are incredible things.

[@biohazard8295]

@@ATruckCampbell give me a lada engine and i will lift the world -Galileo Galilei

[@Frengo69]

Next episode: "How to make a TesLada using a windshield wiper motor"

[@huseyinuguralacatli5064]

this ultimate gear ratio should be enough for that

[@hegeliandetective1034]

If he uses Honda windshield wiper motors, yes! They're wound more than most, for helping to remove a big dump on your windshield of slush/ice.

[@jacklarson6281]

well he already resurfaced a head using nothing more than sandpaper and a windshield wiper motor..

[@DAZUNIVERSALINDUSTREIS]

And put 10 differentials on it

[@leifhietala8074]

"It goes forward just fine...but then it goes backward. This isn't optimal."

[@UKSimon4170]

I'd love to see a Rock Crawler Lada project

[@catwithshotgun1332]

"There aren't any seats, but there's no need to get inside, we've seen what sort of crazy speeds this thing can get up to" 😂

[@kaisyaya8492]

that axle broke at over 10k pound-feet of torque which is impressive

[@mmllmmll22]

Aaaand in normal, metric units it's how much nM?

[@k2akra]

@@mmllmmll22 13558,17 Nm. So freackin a lot for a stock axle.

[@statementleaver8095]

I'm suprised the clutch lasted. Usually the first thing to be a nightmare!!

[@Deviated09]

@@statementleaver8095 the clutch is actually under very little stress. Keep in mind they had the engine running at idle speeds, no throttle. it was little more stress to the clutch than idling doing 35kph in gear. every 1 lb/ft of torque provided at the trans was 150ish provided at the rear diff, plus another maybe 3.55 to 1 reduction added on for the output at the tires. So upwards of 500 ft/lb give or take, if my math isn't way off.

[@hell_pike9150]

@@Deviated09 But how about the stress being placed on the 3rd and 4th diff? Surely those two saw some stress?

[@fusiondensity3287]

Lets see the lada pull an 18 wheeler

[@Monni95]

Like they did on Benny Hill Show decades ago, when a little girl did pull a truck with a three-wheeler...

[@omega1575]

Turn the lada into the 18 wheeler

[@TheNismo777]

Lada can pull a full train if so needed 🤣

[@johnnyjimj]

Reminds me when I was (too) young and just got my first FJ-40 and pulled a 5 ton moving truck out of the field with it in low 1 with locked axles... I did break a couple of spring leaves from the excessive torque, noticed that afterwards but the axles held... I now realize my folly (and why Landcruisers are loved all over the world)

[@marshallmotorssc]

Thanks to the guy that does lego gear reductions I completely get what's happening. Garage 54 never ceases to amaze taking plans to real life.

[@RipRoaringGarage]

"All the live long day" Dude, youre translations absolutely rock! Im thinking I should brush up on my Russian, just so BMI can translate my videos LOL

[@sacr3]

Imagine the torsional forces on that last diff, and axles lol

[@hifiteen49]

I just wanna say They should get a DANA axle

[@Upliftyourbrothers]

@@hifiteen49 Dana 30! Lol

[@MrKevC]

all you need to do now is to use the Lada you filled up with concrete to get maximum traction LOL

[@spiderpickle3255]

Wasn't expecting "ripping the pavement with all of that torque" to be literal. 😅 Also, the slowest burnout ever was the most entertaining burnout I've seen since the first slow motion burnout I seen years ago.

[@jahcubeblbeczek6328]

One on the best channels on KZbin. Skills and imagination! Thank you very much for informative and helpful tips. Original as always! 👍🏾👍🏾👍🏾🖖🏾

[@derwhalfisch]

4x 4:1 diffs in series is 256:1 not 16:1. it's 4^4th, or 4 to the power of 4.

[@Christopher_S]

I love this channel so much. Massive balls to do these things. Over here in the UK, I bet you'd end up in prison for all the health and safety laws that'd be broken haha.

[@UOTCbassist]

Russians are keeping KZbin what it was all about back in the day. No clickbait, just proper bonkers ideas actually executed.

[@Christopher_S]

@@UOTCbassist Absolutely wholeheartedly agree!

[@Christopher_S]

@@creepysmilingcarl9742 My friend, that already exists and has been done: kzbin.info/www/bejne/eYXKfaGLnN-Nj80

[@pyrotank1232]

This dude is going to build a rocket out of Ladas and go too moon with it.

[@pyrotank1232]

@Skynet 😂

[@MF175mp]

4 gearboxes and you could still drive full speed

[@hitchhikerbob4920]

No, the added weight would reduce the top speed, 2, possibly 3. Would be enough

[@Strike86]

@@hitchhikerbob4920 Weight doesn't reduce top speed, only acceleration. /watch?v=ZF58IOOucEw

[@littlejackalo5326]

@@Strike86 weight does reduce top speed. It increases the contact patch of the tires and increases friction, and reduces top speed.

[@hell_pike9150]

@@littlejackalo5326 Also increases mechanical resistance on axels

[@Strike86]

@@littlejackalo5326 It also lowers the car which decreases frontal area and wind resistance.

[@THESLlCK]

Wow that orange nissan looks gorgeous!

[@edism]

Great video and the extreme bravery required for a man to stand with his balls over a highly tensioned tow rope is ridiculous.

[@Smartzenegger]

Every time I find a new Garage54 video, it makes me happy even before seeing it. :)

[@gingerd2098]

This channel is what happens when you grow up, but still want to solve those childhood conundrums haha. I think it's time you go all out and build a totally kitted out Lada as a shop mascot car. You're channel is absolutely incredible entertainment.

[@Strike86]

Wheels start slipping, so Vlad stands on the bumper with the tow rope straining and creaking between his legs to add some extra weight. The man must already have all the kids he can handle.

[@5hiftyL1v3a]

How low is the rating on your straps? They only had 1.5t on it. All my straps start at 2.5t

[@johnthegiant320]

Do the 4 differentials on a commercial truck. Large strong parts and plenty of weight

[@pader4471]

You just need a bigger axle... Like from that bus...

[@johnthegiant320]

@@pader4471 true enough to handle the torque. But the diffs in larger axles would be stronger and have a lower gear ratio in each. And the weight would help plant it down instead of the tires spinning. Plus there'd be enough room for someone to safely sit in and DRIVE it.... see where I'm going? Lol

[@Ckcdillpickle]

That would be far too much.. The tires would be spinning at like 1 Revolution per hour

[@mmllmmll22]

Hmmmm... Ladzilla?

[@Seby-xe3wg]

Jeremy Clarkson be like : POWEEERR!!!

[@kritpitako]

Speed and power

[@IchWillNicht0119]

more like TOOOOORQUE!!!

[@jdmustang4622]

I love watching the crazy ideas you guys come up with

[@michagiedrojc5513]

Episode 202 how fast can a wheel spin Episode 203 how slow can a wheel spin. :D

[@tracymcdougal6381]

I really enjoy y’all’s ingenuity.

[@korencek]

garage 54, we got electric cars with 4 electric engines... can you make a car with 4 internal combustion engines, each driving it's own wheel? :)

[@illdeletethismusic]

how about a V8 block with each cylinder pair mechanically independent driving a wheel?

[@SerbanCMusca-ut8ny]

@@illdeletethismusic I take it your suggestion was sarcastic. Otherwise it's asinine.

[@illdeletethismusic]

@@SerbanCMusca-ut8ny i never called it a reasonable suggestion, but it is a way of bodging together something for that task

[@thenthson]

@@SerbanCMusca-ut8ny very small v8s perhaps.

[@kevinawood]

An old friend of mine had a similar idea. He built a Mazda RX3 with two rotary engines, one on each axle. The last time I saw him he was almost done with the build. Insanity!

[@MeetMeAtTheKiosk]

Flip those diffs around and imagine how fast that would spin something...geeeshhh

[@the_mowron]

They just did that in the last video.

[@mmllmmll22]

"How to fast start a lada by push"

[@MeetMeAtTheKiosk]

Yea they used one diff...im talking about all 4

[@-na-nomad6247]

They actually did it and ended up exploding the tire, you should check thoses videos, they hilariously scary.

[@DomVito87]

They need an actual tv show .

[@NeilDownToTheKing]

Working for this guy would be so fun, doing shit like this everyday just because, love it! 👌🏻

[@handduggraverdronline]

This is my favorite video I've watched yet this one got me to subscribe. That and the paint job that is.

[@albertlagerman]

This would be a nice fit for the drift bus that was geared way too fast.

[@hugohachey1569]

Would probably break cuz of the torque

[@navvet4518]

Calling all Lada’s to turn yourselves in to Garage 54 for ummmm… testing purposes before sundown. Failure to go do will result is a substantially more painful death then what you are already going to experience at the hands of these guys. I love this channel.

[@Timmy6216]

Stack Transmissions like they do in some Toyota trucks you'll be amazed at how slow a burnout you can get going

[@highclasswhitetrash9027]

Some guys got bored and cnc created a reduction box that does the same thing as stacking differentials, toss this into an old twintrans hilux, greatness.

[@highclasswhitetrash9027]

@@mikehoncho3099 had kin that created a drill rig stacking tcases behind a gutless wollered out 4bt. Think he spent more on rod than the metal she was cobbled together with but he could drill as deep as 10k with that ugly old beast. Brought water to many a place it was too expensive to hire an outfit. Three fingers on his left hand, yet smartest old timer ive came across.

[@austin3626]

They come up with the best stuff

[@kristenburnout1]

I like how he's more concerned with the pavement getting damaged than himself climbing above a tightened tow rope

[@pickledpigknuckles6945]

So you turned the wagon into a mighty Winch

[@googleaccount6761]

Really need to do more investigation into this..this is very interesting.

[@notmenotme614]

5:47 Whoa this is the first Garage 54 video I’ve seen where there’s no snow and ice outside. It almost looks like a warm sunny place.

[@therustylemon2369]

The landrover has a height advantage, so whenever it's pulling its constantly being pulled down adding more weight and traction. If the lada was bulling something slightly lower it would pull a lot more as for now it's being lifted up while it's pulling and losing traction.

[@lukasvenckus7878]

I love these vids

[@lukasvenckus7878]

@Tom Simons ᨆ ookk how did u know i was eating ice cream tho 😅

[@DrKniz]

Wow an actual working lada. Now that's something you don't see every day.

[@patinakustoms6109]

I hope they do more with this one.

[@raymondjack4634]

Car mechanic: "Those two things aren't supposed to go together." Garage 54: (picking up his welder) "Hold my vodka!"

[@72polara]

These guys are great, no bullshit. Vlad gets an idea, the guys build it, then they test it. No matter if it works perfect of fails, we see it. I think everything they do is a 107% success.

[@coltbeck6117]

The ghost busters shirt is an awesome touch haha! I can't wait to watch the version 2 of this build.

[@eh86055]

Stuff like this makes you wonder just what madness they're doing over at Garage 55.

[@Raul-xe2yj]

Best mechanic show ever

[@theelcamino105]

Dude is a god at ghost riding the whip🤣🤣🤣

[@leifhietala8074]

This makes me think of a tractor made by a Marvin Baumann. He started with a conventional Ford 8N and added four auxiliary transmissions to it, each of them unmodified in itself but each intended to be installed as the ONLY auxiliary in the tractor. Stacked like that, the "Fourtrans" has enough gear reduction to top out at two inches per minute at full revs. But if you tried to load it up without beefing up other components, the end result would be like you see here: something downstream of all that reduction will fail. Pretty cool project, however, and I enjoyed it.

[@Suomalaine]

bolt the rear wheels to the ground and see if it makes a "wheelie"

[@Njazmo]

@n325aej are you serious?

[@DAZUNIVERSALINDUSTREIS]

@n325aej uh no

[@ante7256]

you don't need to say it twice hehehehe

[@SI00000]

This is easily becoming a favorite channel of mine. You could call it the Constructive Man's Imagination Channel.

[@philipthomas9309]

I pulled a 6 tonne motor home up a 1 in 4 hill with a standard Lada Niva in low range on 205 x 16 radial tyres and every thing worked perfect no problem

[@trevormurphy7041]

You really come up with the coolest ideas I’ve got one for ya turn a Lada into a helicopter I definitely think you guys could do it

[@Silent_Shadow]

I always smile watching this channel!😁💯

[@justinf5963]

Wow, that’s like a go kart axle.

[@keyboard_slap]

Asphalt is actually a fluid! For example, you can sometimes see at intersections where drivers slow down quickly that the asphalt will be pushed forward, creating depressions where the tires sit

[@teamidris]

The half shaft did very well :o) That was a lot of torque.

[@christophermcconnell4811]

That's a whole "Lada" torque!!!

[@terryfromsouthcarolina4601]

You will probably tear out the spring perches eventually. I love It! The World's Slowest Burnout! A KZbin first! Cheers! Terry from South Carolina USA

[@jerryb1234]

There's nothing these guys can't do, great video, and thanks for sharing.

[@countryracer69]

When the bigger rear end goes in that last diff in the series is gonna go bang!

[@jaaprijke1216]

That idea of putting truck axle in it is a great idea! Also it would be cool to show both the "normal" driving capabilities and the tow test with the new axle!

[@scottshipley570]

This guy never runs out of lardas 😂

[@willcal2738]

it got real at 4:37 !! ooh boy those tires

[@sweetcarbro9853]

I'd like to see this again! Maybe upgrading weak parts, and some new tires with low pressure (10psi).

[@RccarsUK]

Very cool...bet that would've crawled a serious incline

[@sr212787]

Thank you BMI for all your translations. The show would still be watchable, but it's much more enjoyable knowing what they are saying 😁

[@ianhamer4494]

Cracking, your doing an upgrade, think my landy would pull the same weight.

[@Engineer9736]

5:04 got me laughing out loud 😂

[@AllDayBikes]

I like how they do crazy shit like this with a Supra just chillin

[@ahmadsaadi5404]

Other channel :Having repair/review/testing content Garage 54 : crazy Ideas that work

[@Studeb]

Can't believe he dares to go close to that rope, those sorts of snapping accidents are dangerous as hell.

[@bertalberta2431]

My thoughts exactly, when he stood on the bumper while it was under tension!

[@Monni95]

They have done enough stupid things that they know how much tension the rope can take... Those are nothing like the regular towing ropes that are basically thin and soft plastic fiber.

[@bertalberta2431]

@@Monni95 I suppose they could have inspected the strap really well and been working within its working load limit but, why risk it?

[@jakens4559]

The all ways got weird ideas but cool to watch

[@adarshsunil7711]

Take this Experiment to next level, wish to see this 4 diffs together 😌

[@mikeznel6048]

There is 5 of them so...

[@TheRenalicious]

That's a whole Lada torque!

[@davidedgar2818]

This is just insane. What a mind to come up with this.

[@Phos9]

Right here we’ve got ourselves this lovely automobile, it runs, it drives, and we’re going to fix that

[@dancoulson6579]

I never even imagines that a half shaft would snap like that. I was certain that if the wheels were spinning, then the weak point would be the tire to road traction. I guess I was wrong. Interesting video, I always learn something new. Next I want to see cars on a tilting ramp, and see show strong a gradient it can hold before it gives out. Maybe do parking brake, vs park gear, vs 1st gear and hand brake, or something like that.

[@m4d_mark_xtr3me79]

That's pretty cool, id like to see how a twin rear axle setup would work with this... You know like a 6 wheeler with the rear 4 wheels being powered

[@silentferret1049]

Weak point can be the framing done. Those diffs will want to twist if enough force is applied which can add stress to everything. Need to reinforce it a bit more to stop that. Double axels would be fun, could even make it a tracked set between the 2 wheels like they do on Bobcats in the US

[@rolasiousgray2671]

This dude really switched up his stay look at his fresh gear he’s wearin

[@beardedskadoosh8835]

Cross brace the differentials. More load will probably cause twisting there... Give me a lever long enough and a fulcrum to place it upon and I can move the world. Cant remember who said it. But its what came to mind during this video.

[@handduggraverdronline]

I like that paint on the hood. My hood faded bad and think I have a idea now.

[@spencerphilippinedream3706]

fun fact, if you do this with an automatic transmission, the brakes arent powerful enough to stop the vehicle.