Fitting a Cheap REMOTE CENTRAL LOCKING KIT to my MAZDA MX5

[@perjian1697]

To anyone watching if you need to watch this video, which is helpful, just skip the first 4:30 and you get to the project at hand.

[@andrehamilton722]

I'm not sure I saw in the video where you show how to wire indicator lights or park lights for when you lock or unlock with the remote. Does this kit have that feature like stock central lock?

[@EsolBuddies]

How do you connect the trunk release and why does the master motor have so many wires

[@HisnameisRich]

In the process of doing this myself, do those door plugs stay tight/watertight after drilling the clip out?

[@PAGEREFURBISHMENT]

I’m sure I drove past you earlier… Waterhouse lane I think it’s called in Chelmsford at 4.10 I recognised the combo

[@RustLocker]

Ha ha , Yea that was me. Give us a wave next time.

[@PAGEREFURBISHMENT]

Hi mate not sure if you’d be interested but thought I’d offer my combo has died due to gearbox I’m selling it as a breaker it has a/c electric windows???

[@RustLocker]

@@PAGEREFURBISHMENT Ahh, sorry, if it was an mx5 I'd be interested, but I don't need enough parts or have the room to warrant a whole Combo unfortunately.

[@cimapiusmaliakal4900]

Hi there! great video, did you ever end up getting the trunk release working? Also do you have any issues with the battery dying after installing the central locking on the constant 12v. I just bought this same kit and installed it and my miata died after leaving it for a weekend.

[@donalex13]

I've had a similar problem. Did you find a solution?

[@Tw1sT-0h0]

Hello . I want to install the same kit in my 93 NA . Do you got any drain battery problem ? As an active consumer to the battery , i hope it won't drain it in 2-3 days :/

[@harrisrobinson3750]

I've found that bracing it there interferes with the door card

[@paulhayestiling2214]

Hey lad, thanks for the video, I have a combo c van that required an engine change, and the replacement dash and ignition barrel only had one key, so now I dont have my central locking anymore. Do you think this kit would work on my van? Cheers. Paul in Ireland

[@RustLocker]

Yes mate, I think you could get it to work on the van even easier if you used to have central locking then the stock actuators are still in the doors, just mount the new ones in their place.

[@paulhayestiling2214]

@@RustLocker ah great stuff lad!! Great channel too by the way, I have a few mods done to my combo, like mk1 Audi tt seats, E46 rear lip spoiler, Meriva clock faces, as well as the tigra boomerangs. Am also waiting on the facelift front bumper and projector headlights. Would like to send you some pics but not sure how. All the best. Paul

[@RustLocker]

Thanks. Yes, They sound like some interesting mods, you can email me (check about section) or dm on instagram mate.

[@foxthewoodturner1765]

Ello mate great video but of a random question but what alloys do u have on ur combo I need to get some but can’t find any 5 studs that fit cheers mate

[@RustLocker]

Those are Corsa Sri alloys, 4 stud though. My combo has 4x100 stud pattern. Maybe look for some Astra wheels? Just make sure they’ll fit before you buy em.

[@foxthewoodturner1765]

Thanks mate can’t wait for ur next video and I will look the Corsa alloys up mines the 1.7 combo so 5 studs 110 pattern I think are urs still the 15 inch or can u fit 16s

[@RustLocker]

@@foxthewoodturner1765 Those are 16s mate. could maybe even go bigger, as long as the width of the wheel fits in the arch, but 16s seem to fit just fine.

[@foxthewoodturner1765]

@@RustLocker yeah was thinking about going 16s mate mine are 185/60/r15 so as long as I keep them 185 they will fit ok and not be to wide

[@user-eq7cc1yt6z]

like your videos mate. Bought honda aerodeck. Your videos are very nice

[@RustLocker]

Thanks mate.

[@eriklee7511]

What you do to hook it to your horn

[@camcleanz]

Very helpful thank you

[@RustLocker]

Glad it was helpful!

[@vicn17]

You installed motors on both the doors? I just ordered a kit, but my NB locks both doors if I lock it from the drivers side, so do I have to install a motor on the passengers side? Or would it work with just one on the drivers side?

[@RustLocker]

Yea, so you have central locking already, so one motor on the drivers side, should in theory open both doors.

[@vicn17]

@@RustLocker Great! Thanks for the reply and the video! Gonna install mine today, cheers

[@baasti14fan]

u r a legend thank you so much

[@trashtalkemperor]

you place your actuator motor wrong you rotate it upside down so the water will not fill the motor

[@RustLocker]

I’m not sure what you mean mate, it’s a sealed plastic unit, it’s just as sealed at the top as the bottom is.

[@trashtalkemperor]

@@RustLocker rotate it vertically thats what i mean, and its not sealed ive seen many actuators like that i open a lot of that and its impossible to be sealed there is no seal inside the shaft

[@RustLocker]

I don’t see how I could mount it vertically though. The rods to connect to are horizontal.