Install Power Door Lock Actuators & Keyless Entry On Your Vehicle | In Depth Tutorial

[@Fentertainment]

Find the Keyless Entry System here - amzn.to/3q3c45t

[@CullenCraft]

All very good advice. You can get the clip off with a thin fabric rag or towel by pulling the sheet under the handle away from the grip if you don't have the crows foot trim tool.

[@FroGGi1989]

dang I was pretty much following along the whole process thinking "i think i can figure this out" till u got to the end talking about the electrical connections and stuff and i got lost lol wish u could do a little beginner tutorial video for that for non-electritians people hehe

[@ivanrodriguez268]

same hahaha I dont think I can do this

[@LordEizen]

@@ivanrodriguez268 ikr I'd have to watch 20 more videos

[@b1blazin13]

It's find a ground and a positive power cable . Not rocket science

[@OG20001]

If you’re confused about the bulk of wires shown it’s color coded so you just match and you’re ready to go. The “hardest” part is finding power source and grounding it.

[@Ureelyreelysuck]

Maybe you should just let someone smarter do it for you

[@bishop_98]

Same exact kit i just got in the mail today. Im stoked to do the install. VERY well documented, sir. Thanks for the details.

[@panibe00]

Your tip with the 9 v battery made my day and was worthy of a sub haha

[@Fentertainment]

Awesome, I appreciate it.

[@camposvazquez]

@@Fentertainment please can you do a video explaining the absence of relays Awesome install

[@jesseowens1492]

Finally, a good installation video. Thank you sir!

[@gun_shark19]

I second that. Good walkthrough.

[@EthePrequel]

Superb explanation. My god the window handle took me forever to remove. Y’all make it look so stinking easy. Thank you for focusing on that part and the importance of where the actuator is connected. I wish i could like the video multiple times!!

[@Fentertainment]

Glad it helped! Ive also heard of people using a old thin shirt or towel to wrap around the handle to pull the clip out.

[@robertstewart9658]

Watched your window install video and now this. Even have the same truck so you have given me confidence. A paint can opener is useful for removing door clips as well.

[@BigWhite002]

this video just made me ok with buying a truck that does not have power locks. thanks!

[@11304tim1]

I have to say that this was a clear and easy to understand video. need more videos like this on youtube. thanks bro.

[@anarke626]

best video ive found so far. Thanks for posting brother.

[@thewondersock3818]

For the window crank clip removal try using a rag. You just spread the rag flat and run the edge in between the door card and the crank and try your best to catch the side of the clip with the rag. Try it both directions since the clip can be on backwards sometimes. It works surprisingly well in my experience and has a very low chance of scraping your door card if you haven't removed one of these before.

[@green3488]

I'm installing this kit along with the power window kit on my hatchback. Just added Rockford Fosgate speakers to Mustang too. 😅

[@SCREAMerado]

haha...I installed the power window kit in my '99 Silverado from your video... now installing the power door locks from your video... Thank you sir!! just one note tho, you forgot to show the reason for the extra wires on the driver door...(central locking feature that unlocks/locks the pass. door if you manually unlock/lock the driver door😉) Great video tho my friend...love your content!

[@watchmanonthewallcouk6498]

You have a great way about you sir, humble to the point and an excellent example for others to follow for their own vehicle .. God Bless you and your family

[@Fentertainment]

Thank You. I just hate watching diy videos that jump around and dont explain things properly. I do appreciate your comment!

[@dangerdoberman]

I just put this in my '97 2door Blazer. Thanks for the info!

[@bigboiandrew6980]

hey i got a problem. i installed the actuators and everything but whenever i try to lock my truck it’ll just unlock right after so it won’t stay locked. do you know what might be causing this?

[@AlbertoSoriano-iv5fp]

Maybe one of the doors aren't properly closed..

[@jamesacker7343]

Acker 1 day ago My 04 tj works like I expected. One thing I noticed is if I use the manual lock button on the inside drivers door unlocks both doors unlock but only locks the drivers door. Is that normal

[@francescosuarez]

Will this work with the key as well

[@duvlss_garage]

For the power did you use the constant 12v under the dash

[@TheSgriffith2]

I did something similar but used a viper alarm system so that I would have keless entry. My question is,can I install a button connected to the relayinside the car so that I unlock the doors while the car is running? The viper alarm will not unlock the doors while the engine is running. It automaticaly locks the doors when I start the car ( by choice in the settings) I was thinking if I added another branch of power to the relays it would send current back into the alarm system and maybe destroying the alarm.

[@Itsme83.]

I have the same truck and mounted exactly the same and wired up correctly and unlock is lock and lock is unlock. Didn’t have enough room anywhere on the door to flip the actuator over.

[@Fentertainment]

swap the wires and you will be fine.

[@Kclimes24]

Will this work tor a 2021 Chevy Spark?

[@mohamedelalaoui1583]

Hi , Great video, very informative. I have teh same truck silverado. how did you connect to the wires from the module to paring lights under the dash? did you connect the horn as well?

[@deddins4]

ths should work on a 2018 f150 no issues right?

[@RaviKumar-rf3do]

App na bahut achacha batsya ha or central locking pata laga or smj ma bhi aaya thank you sir .

[@kevinc5917]

how did you sync up the remotes? i cant get it to sync

[@hma5485]

Explained the best way possible! I got the same kit and installed it today, it took me a while to figure out the 2009 Chevy Cobalt auxiliary box. I read the car manual because my wires was so short and I couldn’t do the back doors, i also wasn’t sure if i was going to get it to the battery. I ended up getting a 12V from the floor fuse box since it’s under the glove box. Im not sure if that’s safe but i seen people do it and i just wanna know if it’s safe, I connected the red cable to the fuse and plugged the fuse. It works just great, i didn’t use any other fuses or “borrow” or depending on a power that’s for another thing, when i read the manual for the fuse box, ot said there is a fuse for unlocking the doors even tho my car doesn’t unlock automatically, but i used that fuse to get the 12V. i couldn’t find the alarm installation guide but I haven’t connected my trunk and second headlights, will you be able to tell me how to connect the trunk and also if the fuse method i used for the 12V os safe? And if i can buy wires to extend it to the back since the wires are short, and if im supposed to buy wires that’s the same color or any wire works? Thank you

[@xinixxagnix201]

Watch many vids but yours is so clear , i wanna thank you for sharing!

[@Fentertainment]

Appreciate you leaving a comment. Thanks. Hope to have a power window installation video soon.

[@Torrez_71]

What about the honking ?? When you lock

[@aubreyj.tennant1123]

Excellent detailed instructions! Thanks 🙏🏼

[@antoniop5889]

What wires did you hook up to the parking lights? Is it the brown and white wires from the junction box? Its the only other loose wires mine came with

[@tonyn7900]

Excellent details info on this install....Great job

[@alfredtorres3913]

What did you use to mount the brackets on the door? Did you drill new holes in the door? How are your screws holding the braket to the door?

[@brandonjones603]

This was a great video. Best I’ve seen on this. I bought the same kit and have nearly the same truck(2001 Silverado). Thanks for sharing

[@braydenstroh5142]

If I ram the power to battery would I kill my battery?

[@SickKlydeSSA]

What was the relay used for ? Nice video by the way.

[@NiNjaTurtLe697]

Can this be controlled over WiFi / internet? Is there anything that will do this?

[@codycrouch5474]

Where exactly did you tie in the wires for the running lights?

[@Fentertainment]

Did you read the description? There are links there that will tell you wire colors and what they do in your personal vehicle. Where to find it also.

[@MegaMichoacano123]

What did you do with the white and brown wires that says connect to main unit ?

[@raphealwood4434]

The window crank is removed with a simple wash rag. Slide it under the plastic end of the window crank and pull up and to you. Just for those folks without the proper tool. It takes seconds and is easier than using the tool!

[@boostedej6]

bossman great video!! i bought two kits the other day after watching this.. i bought the one you got on amazon and i bought a viper alarm system . & i also purchased a additional set of actuators for the viper alarm since it didnt come witih it. so I wired the one from amazon everything works flawless no problems. Ive done it the same way with the viper alarm but everything works besides the doors unlocking and locking with the actuators. the viper alarm came w a relay. The amazon one didnt require one. do you think i need to use the relay or is there something i am missing ? thanks in advance !!

[@leanderjuraschek4512]

is there a way to program a new key fob?

[@nanababybo]

I really appreciate this video! Very clear and short video that got to the point!! Thank you!

[@ExclusiveGamerZ9sX]

Thanks a ton for the video! A lot more clear than other videos I've seen, actually explained what everything did.

[@Rehziicodm]

If I have a car that already has power locks do I just splice it in ?

[@mikekeaton5432]

Ryan there is a brown and white wire from the module separate from the other set for the actuators. Is that for a rocker switch to manually lock & unlock the doors?

[@abdulrehmanakram.3030]

i have Honda Civic 1998 model (sedan) VTI engine. in my car have power windows. i want install door lock central system. I don't have information" either i use actuator motor or without actuator" . i am actually confuse.kindly guide me.

[@leslieking3974]

nice, how does the new door lock look like? I am hoping to replace mine, that has been broken in twice, some thieves used probably a screw driver and just ripped the locker.

[@KD_2Timez]

Can I just wire my Red wire into a fuse under my dashboard on driver side, if so , which fuse should I tap into?

[@gilchevy]

would like to see how exactly the park lamps are wired in

[@jayantbachakaiyan4]

Can you please tell me that if in my car ,there is company fitted manual centre locking system that means by only switching driver side lock all 4 doors are locked, then does it mean that in all of the doors there is an actuator motor , and if i want to install the centre locking system then what shoul i have to do .

[@blakeearp7908]

How is it holding up? Any problems with the unit? How far does the key fob reach? I really like the 9v test learn something new everyday.

[@Fentertainment]

Still going atrong. Its about the same as the oem range maybe a tad further.

[@seanmarek4953]

Which were for the parking light under the hood?

[@amirmiraki491]

Ay what car did you do this on

[@ServantofChrist81]

Can you also wire this kit to an existing actuator that’s already on the vehicle ?

[@ryanpfander1572]

Within the first few minutes you already had me sub very detailed good job

[@Fentertainment]

Appreciate it man.

[@smalliebigs6784]

Hey man great video, I’m doing this on my 2005 Silverado and was wondering what exact wire did you tap into for the lights? Please answer I need help thanks in advance!

[@peteq1972]

Definitely want to put this in my 68 Camaro. Can it be wired so when you unlock it your interior lights come on, and then go out after a few seconds after you've gotten in the vehicle like a normal modern car.

[@Fentertainment]

Sure, However this kit does not offer dome light supervision. This has exact question has been on my mind for a week now. Some more $$$ expensive keyless entry systems has this feature built in. I plan on doing this upgrade to my vehicle soon because I not only want just dome light supervision but I want to add some puddle lights to the bottom of my truck mirrors as well. Which is the same concept but on the exterior of the vehicle like newer vehicles! I didnt think anyone would want to know that but now, I plan on it! I believe It can be done for less than $10.

[@ssmonte8738]

If you ground either of the two wires that say main control module does it lock and unlock also? So you could add a switch in the vehicle?

[@Itsme83.]

If I mount mine that way the lock and unlock are backwards and there’s no room to flip them the other way

[@b1blazin13]

Hey man thanks for the great video but do you know think there is a way to route bthe wire for the trunk pop to make the horn sound instead? I believe I have a close truck to yours. I'm 02 Silverado.

[@owenhart7621]

Is an alarm system required for the other system to work?

[@Fentertainment]

Are you talking about the keyless system required for the actuators to work? If that’s is what you are asking then no. You can put the actuators on your doors and wire them to a switch.

[@kevinmontoya7318]

Very informative unlike the other videos out there

[@teasjams6895]

This video is fabulous, thank you for making it. Great tips and explanations!

[@Siraj_zw]

Can this work with mazda 3 2008 its have sentral lock fuctory

[@nottoshabi779]

Great video. Did you connect the ground wire to the battery terminal or to a spot on the cabin?

[@Fentertainment]

A spot under the dash.

[@javierargumedo3]

NO relays need it?

[@bhogalandson]

Awesome video. Can you provide some guidance on how to add an aftermarket switch to be able to lock and unlock the actuators?

[@toddvalente4494]

Did you have any luck wiring the switch

[@charlielowell4077]

The white and brown wires coming out of the controller are for external switches.

[@mardariusjohnson5468]

Where do I hook up the main unit ??

[@GM23XO]

I have a Nissan Versa Sedan.The only downside is having manual windows/locks. Would I need to buy another kit for the two back doors in the back?

[@Fentertainment]

This kit has 4 actuators to do a sedan.

[@SupernovaEnc]

What should I do if the cables are insulated (covered)? Like brake cables on a bike.

[@Fentertainment]

If your vehicle is using cables and not rods then you would need to get the actuators made for cables. I’ve never owned a vehicle with the cable mechanism.

[@tomjom4865]

You can use a rag to get the window winder clip off

[@uselink5-75]

The remote has a trunk pop button but can't find anything on the internet about parts for the trunk.

[@honeyberry4009]

In my application seems like lock and unlock do the opposite of what i want & i dont have an option of mounting the actuator another way,, will reversing wire polarity fix this?

[@Fentertainment]

yes

[@haskelldill2485]

hey bro, thanks for all your help my 04 c.s. has cat eyes like yours i would think the wiring would be the same ... i got a couple of ?? if you don't mind. on your relay is the two black wires ground and what color wire did you tap for lights under dash? IF YOU HAVE TIME THANKS!!!

[@bendimiero380]

Hey, could you update your link for the kit? It looks to be expired

[@jovanhoft8966]

how do you get the horn sound when locking and unlocking the car ?

[@justanotheruser101]

There is no horn sound. That’s the sound of the actuator

[@hanxiao2609]

what about the white and brown wires that go to the main unit. how to connect those?

[@Fentertainment]

they dont connect to anything.

[@BritishBeachcomber]

10:05 Experts *never* *solder* wires, they *always crimp* - It's far *more reliable*

[@JACK-wh6jl]

BRAVO !!! DOWN TO EARTH SPOT-ON , THANK YOU 👍⚡️😇

[@seanmarek4953]

And how do you rig up the horn to it

[@Scott-NCC1701]

Excellent Video! This will help Me tremendously. Thank You.

[@charlielowell4077]

Great job! Really good description on the installation. Can you tell us where you got your 12V from?

[@reesef6030]

You can look up the color of your power wires for your radio online by the year of your vehicle and follow that wire to the fuse box. Then tap off of it. They do sell devices to do so to avoid crappy connection or just splice and solder with battery disconnected.

[@randalwhite3814]

how are they holding up

[@Fentertainment]

Still going. I havent had to replace anything.

[@BjorgenEatinger]

You should install a bypass switch somewhere.

[@RandomStuff-po1us]

Can I just use the front two locks if my truck is a two door?

[@Fentertainment]

Yesser, thats what i did.

[@bigteo90]

If I strip the antenna and ground it to the car will it boost the signal?

[@Fentertainment]

LOL, I dont know man!!!!

[@masjawa3349]

If a large metal could recive good signal, there wasn't an antenna.. Lol

[@mosaic.emom1234]

Can it be installed on old cars like w123 Benz?

[@Fentertainment]

Sure, We did one on my parents 1954 chevy 210.

[@haskelldill2485]

thanks for your video very helpful, question ... on my instructions there is a white and brown wire that says "connect with manual." what does that mean? and do i need a realy?

[@haskelldill2485]

relay.... sorry

[@Fentertainment]

I think it says connect with main unit. Not sure what that is, I didnt use it on mine.

[@Fentertainment]

@@haskelldill2485 Only use a relay to change the polarity of your light output. You will need to figure out what your vehicle park light wiring is and if you need to or not. The light output violet wire is a positive trigger. If your vehicle has a positive trigger then you wont but if it has a negative trigger like mine then you will.

[@haskelldill2485]

@@Fentertainment thanks brother!!!

[@codytarvin6238]

Do this key fobs come programmed if you had to buy separate how would you program them? The kit is no longer available on amazon.

[@Fentertainment]

Yes, they come programed. These are available amzn.to/2DEZaTF

[@TaijiArban]

Are the wires long enough to cover all the doors of an SUV like say a chevy tahoe?

[@Fentertainment]

If you mount the module under the dash you should have enough length.

[@TaijiArban]

@@Fentertainment Thank you for the prompt reply, I will give it a try soon.

[@SurvDC]

Can a door switch be wired in?

[@toddvalente4494]

Where you able to hook up a switch

[@qtm1369]

Will the key still work ?

[@Fentertainment]

yes

[@dorianxgrey6663]

excellent installation brother!! def, learned some good stuff

[@jonathansalazar3207]

Great video brother. Clear and informative instructions!!!🤙

[@Fentertainment]

Glad it was helpful!

[@buschfishin]

hey man, great video! i have a quick question, i got a 2003 f150 and i'm wondering where to hook up the wires for the lights so that they blink when you lock and unlock. haven't installed the kit yet as I just got it today but I can't find anywhere where to hook up the two wires for the indicators, any help would be greatly appreciated!

[@Fentertainment]

Follow the links in the description. Put your year make and model in. Im unsure and I would have to look also.

[@Russianadidas_man420]

Can u install this to a GMC Sierra 1500 2004 work truck?

[@Fentertainment]

Sure this is universal. Your gmc sierra 04 is basically the same as this silverado. Look how i mounted everything and just copy it.

[@rogerdiaz7198]

Hi I’m looking to do this to my exact same truck but I’m stumped on the relay part, could you go into more detail or send me a link to a diagram?

[@Fentertainment]

You dont have to use a relay if you are doing the same truck. However you will have to find the 12v parking light wire in the driver kick panel. I used the relay because I used the wire located on the bcm since it was quicker to find. Here is the wiring for a 04 truck. www.the12volt.com/installbay/forum_posts.asp?tid=57723

[@lou704]

Excellent instruction block. 👍