Fitting lift springs to a Mitsubishi Shogun Sport // 2inch lift // Pajero// Montero

This is how a fitted my 2 inch lift to my Mitsubishi Shogun Sport
Disclaimer: This is not a how to video

[@ALBERTOGALINDO1983]

Just a piece of safety advice, never trust a jack, always use a secondary "just if" tool or jackstand to be safer. Love your videos ✌️

[@LS10Works]

Great advise, I have now invested in some jack stands, Thanks for the concern though :)

[@ncortezcortez8768]

Buen consejo.💯💯👍asi travajava yo asta k un dia estava solo i el jack..c vencio. C vino el carro lento.gracias a dios.me di cuenta a tiempo.con toda mi fuersa pude salir jalando dla orilla.del body..lo.lo logre.🙏desde ese dia.au k sea la yanta le meto d proteccion..saludos👋👋👋👋👍👍👍💯💯👈

[@mikenco]

Interesting. My local Garage just fitted "20% stronger" springs which has given a side effect of a 2" lift at the rear. Glad to see I can level the car using the torsion bars with minimal messing and not having to re-index the splines. Cheers!

[@LS10Works]

You're welcome 😊

[@jamesherrera2269]

What did you torque the rear torsion bar too?? I watched your video many, many times and I was successfully able to do it myself as my first time. Thanks a lot for the knowledge and angles in this video! Extremely well explained mate! Cheers

[@Bondovw]

Where did you buy the springs?

[@LS10Works]

They were from eBay. I searched for sh9gun sport 20% uprated springs

[@carmodsdaily4167]

Have you got the link to the springs? And was it just a 2” lift you have done ?

[@LS10Works]

Hi mate, Heres the link to the ones I bought www.ebay.co.uk/itm/263026506100 Yeah, just a 2 inch lift and tall tyres :)

[@MyReptilesNotUrs]

Hey brotha, did you disconnect your shock / strut from the rear when you use the bottle jack between the chasis? I just tried doing this today and it seems like my strut reaches the max extension before the spring pops off. If not, I'm gonna try going tighter on the clamps.

[@LS10Works]

No, I just went nice and snig with the spring clamps then the springs were able to come out.. the shocks stayed as they were. Good luck 👍

[@paulnann2572]

Where did you get the springs? What way did they settle is there still a decent lift

[@LS10Works]

eBay. After settling it gave a good 2" lift 💪

[@jamesverdon1966]

did you find the camber could be corrected at a tyre shop? I'm assuming its running on the outside of the tyres a bit?

[@LS10Works]

Yeah they adjusted it as much as they could and it was back to normal but any higher and i would have needed to install some shims to correct the camber. 2" seems to be the limit on the torsion bars without installing shims :)

[@jamesverdon1966]

@@LS10Works Thansk. I've just done this mod with your video as a guide - very helpful. Fingers crossed my camber can be adjusted :)

[@LS10Works]

@@jamesverdon1966 brilliant. I'm glad you found it useful.. ☺

[@bradrobinson4259]

Hi, do you know how many for the torsion bar lift? And it is clockwise to lift it? Cheers

[@LS10Works]

Clockwise to go up. I did 10 turns on each lowered off Jack and adjusted from there 😁

[@gertjandikboom2234]

Hey, I have a pajero sport (2003) myself and i ve been looking to lift it. Do you think your springs are gonna fit ? engine code is 4d56

[@LS10Works]

Hi, yes, they will fit 😁

[@gertjandikboom2234]

Thanks mate🤌

[@s0058131]

So just rear coils replaced, and front ride height can be adjusted by the tortion bars?

[@LS10Works]

Yeah thats it. Nice and simple, and relatively cheap mod 👌

[@s0058131]

@@LS10Works thanks man 👍🏻

[@freddydiaz2714]

Buenas tardes alguien sabe como bajar la llanta de respuesto de la misma camioneta ? Mitsubishi nativa

[@gilbertbangayan3140]

Is this coil spring is fit to Mitsubishi shogun 2005 model

[@LS10Works]

They are different springs. These were specific to the Shogun Sport

[@alfielittle4887]

Torsion bar lifted and them springs what tyre size did you manage to fit mate with these mods

[@LS10Works]

I'm sure these were 31s mate :)

[@vzo8049]

Done same lift technique to mine for years now, always been runing 33's, also ran 35s once before with slight rubbing.

[@BedfordshireBiker]

@@vzo8049 did you need a body lift too for 33's? got some 33s for mine and going to fit my springs this weekend

[@vzo8049]

@@BedfordshireBiker body lift would have been better but no i never did a body lift, just springs lifted in the back and torsion bar crancked to max then a few backwards turns for upfront.

[@CarlosMorales-vk6li]

They will fit a 2007 Mitsubishi Montero Sport XLS. ?

[@qataroffroad]

Hi mate, wanna ask how did u gt to make the turbo sound louder. I own a 2.5td

[@LS10Works]

Hi mate I just ditched the air box and banged on a cheap cone air filter. Made it sing 😁😁

[@qataroffroad]

@@LS10Works thats a good idea.ill try it and thank u

[@LS10Works]

No worries. I've just remembered it was decatted too so that helps the turbo whistle too

[@qataroffroad]

Thought that will make the car sounds bad. But will try it anyway.nothing to loose lol

[@joshuahumphrey8218]

Have you got a link to the cone filter you put on Thanks

[@caswelldixon3356]

Good day where did you get them to buy i need a set

[@LS10Works]

I got them off eBay 😁

[@reneblumers6505]

Hey man, Do these fit the 2.5td? Says they are for 2.8 but couldn't think of any diffrence?

[@TheGreatOutdoors458]

Did you need to extend the brake hoses at all ??

[@LS10Works]

No, they were untouched with this lift 😁

[@TheGreatOutdoors458]

@@LS10Works Thank you for info

[@LS10Works]

@@TheGreatOutdoors458 no worries buddy

[@nenook1000]

What shocks did you use ?

[@LS10Works]

Factory ones

[@danhumphries1104]

Where did you buy front and rear coil springs?

[@LS10Works]

Hi. They are just rear springs as the front is adjustable via the torsion bars. The rear springs were sourced from eBay. 20% uprated rear shogun sport springs in the search bar should bring them up 😁😁

[@danhumphries1104]

@@LS10Works nice 1👌

[@danhumphries1104]

@@LS10Works nice 1👌

[@tomasmcclements1491]

Gona wreck your watch mate

[@LS10Works]

Every time I work on the car I think to myself "I should defintly take this off" never do though as I'll lose it somewhere 😂🤣

[@danielbichokov1340]

HI, i dont see any bumpstop, why so ? :D

[@LS10Works]

This was how it's always been since I had it. It has a couple of small bump stops on the lower arms. 😁😁

[@danielbichokov1340]

@@LS10Works if im not wrong there should be 1 massive stopper in each of the springs :D

[@LS10Works]

@@danielbichokov1340 I'm pretty sure the Shogun Sport is different set up and only has these little ones www.ebay.co.uk/itm/Suspension-Bump-Stop-Rear-For-Mitsubishi-Shogun-V24-2-5TD-V44-2-5TD-1991-2004-/332449614545?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0

[@danielbichokov1340]

I have the same 3.0 177 gls - check for those MR418018 :)

[@crustynuts]

when hes jacking it up it sounds like its saying jaffa cake jaffa cake... or am i stoned

[@LS10Works]

I think you're stoned haha 😄😆😅

[@tluva1020]

Lol, did I see a Confederate flag?? WTF !?!? 😂🤦

[@LS10Works]

It's from a Lynyrd Skynyrd album I had, hence its in the shed 😂🤣