Fitting Proline 1966 Chevy C10 to Traxxas TRX-4 and do Proline 1.9 Beadlocks fit???

Get the Power Screwdriver & Tips here at Amazon:
USA:
Driver: amzn.to/2tX5t2b
Impact: amzn.to/2suXNjg
Tips: amzn.to/2sSfqsp
UK:
Driver: amzn.to/2uvTjuf
Impact: amzn.to/2tmeAaU
Tips: amzn.to/2tNZRXw
Awesome RC Action uploaded weekly, Subscribe so you don't miss it :)
Like my facebook page to stay up to date with nev vids: / kevintalbotrc
My Gear
Drone: click.dji.com/AIImBZ4p15Rm_oy-...
Cameras Canon 70d, sony RX100, Samsung Galaxy s7, SunnyCam HD

[@tinman5478]

I saw this at my local hobby shop and saw a pile of clear body's on Amazon. Thanks for showing that you can put after market body's on the TRX-4

[@jacobhenson3952]

I am really like in these build videos and I'm learning a lot to. Thanks bro.

[@curtiswiggins4714]

the green is the one you really want !!! nice very nice 😎

[@thatsmyrc]

Nice choices of tops for the TRX4. Love that finger snap lol total blast from the past move ;-)

[@KevinTalbotTV]

haha thanks dude :)

[@HillbillyOffroading]

That's my favorite truck you got.

[@russellcupples2170]

That looks wonderful .And I'm a Ford man but I give credit where it's due

[@sniperboss4]

On my trx4 I switch front and back bumper mounts then flipped them it works great

[@RCArsenal]

Looks nice man! Looking forward to seeing it painted up! Thumbs up #127

[@marcchiaravallo1257]

you can use a front bumper mount in the rear... that gives you 4 offset options between the 2 mounts... thats what i had to do to run my ascender blazer body on the TRX-4... i am running a front mount upsided down in the rear... i am using an axial scx10ii rear bumper though... i needed a little more drop to match my body... OR you can use an scx10 bumper mount... there are options for sure...

[@MWitt-bw7im]

Flat Iron, Red, and take off the rear bumper and notch the body out so you can mount the rear bumper it looked like it would be just about right on the money of where it will sit.

[@rugrataudio]

great video dude.thanx for that bumper trick! i liked and subscribed truck looks awesome! plus shedding all that weight off the top will help alot. are you going to fit the inner fenders?

[@donniefoster7494]

BF good wrench

[@ethanalvey9537]

You should try and fit the deadbolt bronco body, I've been eyeing up that body but not sure if it fits, but the c10 in a dark olive matte green with a gloss white roof and a red strip on the side looks good! I had that paint on a 1:1 c10, also I recommend the bfg tires

[@jonthomas8487]

I wonder if I used magnets if I’d need to cut the holes for the shock towers? It seems to only be about a 1/4” off

[@patrickgonzalez1929]

Which body mounts are those specifically? Got a link?

[@rchysteria5339]

You should go with the white on top and the teal/mint color on the bottom

[@bobbayne]

What was the rear body mounts you used

[@noahh.davidd]

I think you should paint it that teal color, and maybe a small black or white trim around the fenders and side skirts!

[@boltthr0w3r29]

Trim a notch on back bumper on lexan body👍🏼 to fit stock rear bumper

[@petermcpherson8084]

Raise the rear body posts up 1 notch and then might be able to use stock bumper mounts. What about matt black with white roof?

[@areadierc2803]

Could you mount front bumper mount on the back?

[@devynstephens3200]

BFGOODRICH they look awesome

[@kalvinwinder]

for the bumpers cut some vertical notches so the mounts can slide through the notes to the right height without cutting off the whole bumper on the shell.

[@craigschofield64]

I love my flatirons...I run scale comps and the flatirons are damn great

[@nmrc7778]

u should mount the spare tire on the rear bumper brace like a real truck I think that would look cool on that truck great vid.

[@kidstropical432]

awesome

[@tommyrobinson8286]

How did you get it to fit the 12.8 wheelbase?

[@matthewcutler4082]

Love mine

[@CRYTEK346]

What is the colour code of the teal Kev?

[@BadmunkyWRX]

I want to see it with the larger Mud tires you looked at first!!!!!

[@markskielliott5962]

I’ve grabbed this body for my txr 4 sport. I can’t get it to fit at all 😔

[@devynstephens3200]

There should be a front mount with the box...i got one..try ot

[@pretziboy4162]

Why u change the body, don't you like the defender body?

[@orion8819]

BF Good Wrench.

[@jamesstraub4981]

You should paint up the Bronco body. It would be cool.

[@butchthompson2835]

Trim the back bumper off of the body also since you are using the trx4s bumper. Also, shoogoo the bed to the cab. Light green and white. 🍺

[@zackmorris8996]

when you gonna break out the rebuilt xmaxx? dying to see it in action!

[@KevinTalbotTV]

Was out with it the other day, vid coming later today :)

[@lpvpip]

Get another front bumper mount for the rear. And do Hyrax tires

[@squareblueorange]

Peppermint green body with a white roof would be pretty cool

[@KevinTalbotTV]

Thats what I did :) Cheers

[@mccowansam]

Flatirons look good

[@PeterPiccolo]

time to invest in a tabletop 3d printer so u can design and print every littler bracket and mount you could ever dream of!! i was actually considering the same, and will come in handy if u get into fpv and making little mounts and such.... would be a perfect solution, or just rig up some type of mount to lift it up just a bit but not too much as to look too high like u said... what do you think??

[@rockymountainhobbies1366]

U should paint it gunmetal silver with a white roof, and put on a set of "Axial Racing" Maxxis trepador 1.9 tires...

[@sharkfatrccustoms]

I'd paint the TRX shell orange with a white roof and a white stripe down the sides.

[@RCKING1]

Teal

[@jakekocourek378]

whats that body hole maker thing you used?

[@KevinTalbotTV]

its called a body reamer

[@jakekocourek378]

Kevin Talbot thx, bc I need one, and I love your rc rustler, plz make more vids on that king,☺️😉😉

[@curtiswiggins4714]

good wrench .GOOD WRENCH GOOD WRENCH GOOD WRENCH

[@scottdashnaw2345]

Says goodrich on the package...

[@buckhealy696]

Turquoise and white top

[@joshuachatley8356]

like ur vid good how to

[@abdalwakiylthompson7832]

White & teal w/ BFGs, in my opinion

[@marcuswoolley8955]

are those xt90 connecters

[@KevinTalbotTV]

yep xt90

[@alexanderlundmark5079]

Whats that clickhing noise?

[@gamerverse1.1]

Hi kev

[@cleansconcepts7336]

Bfgoodrich and that teal color for body

[@KevinTalbotTV]

Yes, thats what I went with :)

[@donovonhargrove]

Bronco body and BF Goodrich tires

[@mccowansam]

How about Black roof and Blue body

[@donniethompson7485]

BF good

[@austincurenton]

Aqua green

[@justbashinitrc]

Make a bumper that goes inside the body

[@fishnfreak04]

Matte graphite grey old dodge 1950s dodge power wagon body👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👍🏻👍🏻👍🏻👍🏻👍🏻=noice noice

[@fishnfreak04]

BFGoodrich

[@mccowansam]

Midnight Blue body

[@dmaxdilly]

BF Goodrich

[@chandlerheiserman3537]

White roof blue body

[@adamtaft1062]

I drive a jeep so I say jeep...whats o it there for xmaxx?

[@anthonywozniak256]

bfgoodrich

[@nahbruv3621]

im a chevy guy but when i buy bodies i like underdogs so i crawl dodges and fords. bumpers are always a fitment issue for me.

[@buckhealy696]

GF Goodrich

[@buckhealy696]

With the old white spoke version

[@MrBulldog917]

go with the boggers and then raise the body

[@KevinTalbotTV]

I may try that at some point

[@donniefoster7494]

Yeah it's a toss up red and blue I go red being an auto mechanic I go read

[@justbashinitrc]

Geen

[@outdoorliving8254]

Run the Boggers

[@Shinra2944]

Old kevin

[@olgabondarenko6436]

Hey kev what do you do on eBay do you sell stuff?

[@KevinTalbotTV]

That's it buddy :)

[@griffinscheftic3394]

white roof blue body oh yeah hi people in the comments

[@ethan2941]

Bfgoodrich

[@onemansvideos2134]

trim to fit lol

[@mccowansam]

Na! Turn the back one back down

[@zackepperson8566]

Bfg

[@benwheels8116]

ur the best my facet youtuber I got a 5t I am 14 check out my vids it would be a honer o and asom vid by the way keep it up love it

[@KevinTalbotTV]

I cant see any video on your channel dude