One of the most detailed panel install ive seen mate good job. Only feedback i would give is level your audio but apart from that well put together how i did it video 😊
@cornish_wallys Жыл бұрын
Thanks mate, yeah I do need to address this issue...just using my phone at the moment. The gopro mic was even worse 😅 thanks for the feedback mate, I really appreciate it!
@iam_anderdingus Жыл бұрын
Looks really neat and tidy fella. Looking forward to more episodes
@cornish_wallys Жыл бұрын
Thanks mate 👍
@StevenWilcox-cm6en Жыл бұрын
Well as far as I'm concerned you've done a great job of this video I really enjoyed it now I have subscribed.
@cornish_wallys Жыл бұрын
Thanks mate! Really appreciate it. Lots more coming soon! 🙏
@StevenWilcox-cm6en Жыл бұрын
@@cornish_wallys you're welcome. Good luck.
@vikingcampervans Жыл бұрын
Great job
@cornish_wallys Жыл бұрын
Thanks! 😁
@tospicy4ya Жыл бұрын
Lovely job , I’m looking for the same van , any advice on where to buy or what model ?
@cornish_wallys Жыл бұрын
Thanks 🙂 I bought my van privately, but dealerships seem to be getting them by the truckload at the moment. I suppose they are at the 5 year old stage, which means end of pcp/hire purchase contracts. They seem to dent really really easy, so look out for small dents, check the loading area under the barn doors as they seem to get pretty rusty real fast if damaged. If fwd the CV boot on the drivers side seem to be a common issue...but may be a bargaining tool. Full service history is essential! Other than that they are brilliant vans! Happy hunting 🤟
@tospicy4ya Жыл бұрын
@@cornish_wallys thanks
@alanmay1945 Жыл бұрын
Yes, putting that cable entry box sloping side forward is best, I think too, despite the cables needing a loop. With the bracketing, looking at it paused at 18:00, it would seem to me that your home made long brackets 50x70 along each side of the van is all that is needed, without those little ones in the middle having to be there at all, as the panels in themselves are plenty enough rigid and robust. What do you think, with hindsight?
@cornish_wallys Жыл бұрын
Hi Alan, thanks for the comment! Yeah I was unsure if it needed them at first, but I'm glad I put them in as the solar panels weigh 10kg each, and with the panels bolted together it did seem a bit flimsy in the middle. The aluminium framing of the panels is super thin and maybe driving along a bumpy road it could potentially damage the panels. It's funny watching it back as all of the planning in the background took soo long! I'm still glad the way I have done it and to a really good standard. I've seen what happens when panels come flying off the roof and it's just not worth it to save on a few holes. But that's just my opinion. And the homemade brackets must only weigh a few grams. And there is a main structural member in the middle of the panels. Its crazy how much the metal sheeting moves when i try and move the panels and in 1 of my later videos I've fitted support beams inside. Hope this helps and thanks again for your input 😀
@Jwillow1990 Жыл бұрын
Any advice on where to buy solar panels from?
@cornish_wallys Жыл бұрын
I bought these direct from Renogy, we had these on our last van too and they were brilliant.
@rogerstarkey5390 Жыл бұрын
Seems to me that's 8-10 more holes in the roof than you really needed. 2 strips of unistrut 2 bolts each (Rivnuts) and everything bolted to them....
@cornish_wallys Жыл бұрын
There's 9 holes all together, but 5 of them are the existing holes for roof racks. Thought I would just make sure the front was really well held down and supported. The awning complicates things for unistrut, I'm sure there's a way of doing it. The roof line of the crafter is a right pain too. It slopes towards the back of the van so hard to bolt something square to the roof.
@MatthewPye-en5nu9 ай бұрын
That was a great video!! Apart from using the Lords name in vain…. Look forward to watching you continue to convert you van. Could I ask how much the van cost you?
@MatthewPye-en5nu9 ай бұрын
Gods sake!! Why you call out to God when things are not going right, It wasn’t His fault that you forgot to turn the power on to your chop saw my friend.. remember He does hear you and one day He will ask you!! 🙏❤️