ARRMA Senton 3S BLX Monster upgrade Bash

[@romantheegreat208]

Liking the sweater;) Good video!

[@FortekNine]

Yea man thanks for the sweater😊

[@paktoysreview8377]

you are a nice youtuber

[@ccrc8213]

Could switch the wheels around so one side is black and the other chrome. It's amazing how much more useable the Senton is with larger tires.

[@Dan-ji2gw]

I like the granite tires look great

[@ertcanlas9390]

its actually pretty cool that you end up with the black and the black chrome, now i know which one im gonna get

[@FortekNine]

I wish i knew earlier there was two colors 😂

[@joshuaroehl4704]

Cool truck!

[@413RC]

finally took my senton out for a bash! big inspo to make the content look good!

[@tiborvon]

Nice bash bro, she is a little beast

[@FortekNine]

Thanks bro

[@fanaigor2539]

👍 waiting for next video

[@Jamesmoore-mj5ke]

I have the senton converted to 6s with big bore shocks my front shocks seem to week soft. I have 2.8 wheels &, tires?

[@FortekNine]

Thats a nice setup 😁

[@philthyco1]

She's a beast!!!

[@dianemcguire2622]

Do you have to change anything on the senton to put the granite tires on it

[@captainsimm1]

Hi Nice vid’ ! What is the ground clearence now with these t New tires ? Thanks

[@FortekNine]

Not sure in exact measurements, but not very much higher

[@reid9041]

Bought the senton 3s blx wanted big tires. Seen ur video and inspired me to pull the trigger. The pinion gear to 15T wud of never guessed to do that. 👍👍

[@FortekNine]

Its a pretty cool setup especially running on rougher terrains 😁👍

[@reid9041]

@@FortekNine so dropping the pinion gear from 20T to 15T makes it so less stress on motor to run the big tires right? Jus got it switched with my Duratrax C2 belted like 5" overall size tires.

[@FortekNine]

Yup takes away the stress on the electronics

[@reid9041]

@@FortekNine So got my belted duratrax tires and 15T pinion gear loving the setup but servo went out after awhile trying to turn those big tires lol. That stock 7kg servo wasn't cutting it. Upgrade time

[@Evan-rq2ee]

hey, im looking to get basically this exact setup, im trying to get a 15T pinion with granite tires and this exact body, plus the Tbone racing bumper, i want my senton to be a monster 😂

[@Evan-rq2ee]

So, i did it. Tbone racing bumper, granite wheels, 15t pinion. and the same body. it looks so good and performs like a beast

[@marcvanderkruis8601]

Hey mate, I was just amazed at how much identical stuff I just ordered for my Senton and now I come across your video. It will take a few days to get it to me here in the Netherlands so now I just can't wait any longer with thanks to your video. Lol, but very cool and I hope it will be in soon. I was wondering if you already thought about the possibility of the Arrma Big Rock Crew Cab body to get enough clearance for the wheels. Maybe a nice idea. Thanks for the vid, and stay healthy. Greetings from the Netherlands Macspacey out!!

[@FortekNine]

Thanks brother thats awesome to hear. I really like the short course truck look so thats why i stuck with it. I think the Big Rock Crew Cab body would be nice if your going for that style. I hate to trim the body to make the tires fit but it works and looks nice 😊 Have fun Bashing in Netherlands 👍

[@kylepearson7135]

Where did you get the shocks from? And with the bigger tires did you have to upgrade the servo? New to the Rc world. And looking to upgrade my 3s. I love this truck!! Thanks!

[@FortekNine]

The shocks i got them on ebay, search big bore aluminum shocks Arrma Senton. My servo went out and had it changed before i had the bigger tires so not sure if the stock servo is going to have a issue with them.

[@MJ-gq9nv]

I even liked the background tunes💯

[@MJ-gq9nv]

Doing good man, like you trying towards combination stuff.we eat that shit nite and day,,, love my bigrock!!! MJ.

[@danielkonrad1444]

Where did you get that beautiful body? The color looks absolutely amazing. Can't wait to get my senton.

[@FortekNine]

It's the Senton Mega body, the 3S and the mega are same size bodies 😊

[@danielkonrad1444]

@@FortekNine thank you! That was a fast response!

[@jperk323]

How has the TBone front bumper held up? Getting really tired of replacing the stock one constantly.

[@FortekNine]

Its better then stock in my opinion but I had it break only where the screws hold the bumper which i used other screws and worked fine.

[@bobaque70]

Beef cake Senton.i have 2wd blx 6s senton!love it!

[@FortekNine]

2wd and 6S? Thats awesome, must be crazy to drive it and control it with all that power 😁 I have to check it out!

[@Bikebert_MTB]

great video and it looks like a lot of fun, have you had long-term experience with the bikes? holds the diff and the drive shafts and do you have to pinion down? greetings from Germany;)

[@FortekNine]

Thank you, No not really i dont have much bike experience. Its better to pinion down if your riding bigger tires. 😁

[@009ADVENTURES]

nice one bud, they do seem to handle much better with the granite wheels 😃👍

[@FortekNine]

Yea especially on rougher terrain, and your clearance is a little higher, love the setup

[@markhaines7109]

Did you raise the body mounts too or have you just got extra clearance by putting taller shocks in?

[@FortekNine]

No i did not raise the body, it does not lift very high. I had two bodies so I just trimmed one of the body so it wouldn't rub when i run big wheels and used the other body for stock wheels

[@DavidLosk]

Will I need to buy a servo saver for the powerhd?

[@fredrickfletcher2823]

Where can you purchase T-BONE Racing Products?

[@FortekNine]

On the their website www.t-boneracing.com/

[@stuarttomlinson802]

Awesome Video man......Did you have to change gears to run the Granite tires ?

[@FortekNine]

If you going to keep the tires on and do alot of long speed runs then I would recommend, for little bash I left it on stock gearing.

[@nickcangemi529]

Did you put in a different pinion gear to accommodate with the bigger tires?

[@FortekNine]

You can change it but I left it just to see how the system would handle it

[@nickcangemi529]

Thank You. Did you have any problems with the larger pinion gear?

[@FortekNine]

@@nickcangemi529 No i haven't, i tried avoiding being on throttle full time and had no issues.

[@nickcangemi529]

Ok. Thank You

[@donniemarks94]

I finally got a 3s senton and a set of duratrax wheels and tires, what size pinion gear are you using on this truck?

[@FortekNine]

I was using the stock 20T on this setup, but I would recommend 15T so it wouldn't be so hard on the electronics

[@donniemarks94]

@@FortekNine 15 T is what I was thinking too, thanks man 👍

[@spadds]

Hi buddy - nice videos - great work, thanks for posting! I just ordered my 3S BLX! Can't wait to get it! What batteries are you using? You need EC5 connection right? I think I'm after 5000 mAh 50C, but struggling with EC5 connectors and my charger is on XT60! Wish they'd make just a standard connection so I can get bashing right away! Stay safe!

[@FortekNine]

Congrats man that's awesome, I'm running 5000 mah 50C. You can get adapters for different connectors like XT60 to EC5 or make your own.

[@spadds]

@@FortekNine awesome mate! Thanks... I will subscribe!!!! Keep the vids coming!

[@tankp3961]

How long does your battery last with the upgrades, my brand new one with those upgraded tires lasts 5 min on a 5200mah 3s 50c

[@FortekNine]

Might want to check if all you cells are good, mine lasts the same as before about 15-20min

[@Ikonzrc]

#173👍 keep up the good work

[@FortekNine]

Thank you man 😊

[@ThePartyanimal1984]

Hello :-) What is your driving time with the BLX 100?

[@FortekNine]

On a 3S 5000mah bsttety it runs from 15 to 25 min.

[@408.ac_]

Did you ever change your servo after this video? What’s a good servo that you recommend?

[@FortekNine]

The stock one went out pretty quick, I put in Power HD LW-20MG and never had issues after

[@408.ac_]

@@FortekNine Thanks for the recommendation man I will look forward into upgrading my servo to the servo you have

[@spencerjohnson1499]

I just got granite tires. It's stock with a 20 tooth pinion the motor gets really hot. what pinion do you run on it

[@FortekNine]

Go down to 15

[@spencerjohnson1499]

Thanks I know I need to step it down. What kind of effect does it have? I don't care for 50mph fact I don't drive it like that anyway I'm more for stunts and flips

[@FortekNine]

@@spencerjohnson1499 more acceleration and probably will still go around 45mph

[@spencerjohnson1499]

@@FortekNine right arm thanks

[@mbfishing3807]

I bent my shock shaft on my big bore shocks where do I get a new shock shaft

[@FortekNine]

I tried looking for parts but couldn't find any, if I do ill let you know

[@mbfishing3807]

@@FortekNine ok thx

[@damson2809]

Nice vid. What camera setup do you have

[@FortekNine]

Sony A6500, Thank you 😁

[@francislevisantos6167]

Did you have to trim that body to fit those tires?

[@FortekNine]

Yes I did 😊

[@francislevisantos6167]

@@FortekNine thanks! I had to ask you first. I really like your videos with the Senton.

[@nickratliff5235]

Still running the stock 20T pinion with those tires? If not what pinion are you running and does it reduce top speed and punch?

[@FortekNine]

Yup still running the 20T, but it is hard on the stock esc sometimes so currently running stock tires, running 15T is what I would recommend for those tires. You might lose of little bit of top speed with 15T.

[@xxg0t3mxx]

I am wondering I did 3s conversion would love to swap out spurs cause from all I seen people eat em up running 3s would the blx spur slide in with a few mods?

[@greatrcxxx5473]

Awesome video! I really enjoyed it! Just subbed!

[@FortekNine]

Thank you!

[@greatrcxxx5473]

Fivo Nine no problem! We also make rc car videos on our channel, if you’ve got a second to check it out that would be awesome!

[@_igz]

nice

[@monteman59]

What size are the tires and rims ? Nice video 👍

[@FortekNine]

They are 14mm Hex and heres the specifications: Wheel bead diameter: 2.8" (72mm) Width: 2.1" (53mm) Wheel hex size: 14mm Overall diameter: 5.0" (128mm)

[@monteman59]

Fivo Nine thank you 😊

[@rcrod7829]

Did you have to cut body, once you put bigger tires on it? I dont want to cut body, looking for longer body posts

[@PopExpo]

That looks like Washington State in the background.

[@FortekNine]

Yup Spokane Valley 😊

[@brelfpv1437]

I think senton has more interesting sustentions than big rock.

[@HazyTWxGGZ]

what kind of shocks are those? where did u get them?

[@FortekNine]

Aluminum big bore shocks from Ebay

[@HazyTWxGGZ]

@@FortekNine thanks! What size are they?

[@FortekNine]

@@HazyTWxGGZ Not really sure I sold the truck already, but if you type in aluminum big bore shocks Senton 3s they will come up

[@HazyTWxGGZ]

@@FortekNine alright, thanks!

[@XIS3]

What rims are those??

[@FortekNine]

They are the Arrma Granite tires