FIX BIOS Black Screen No Display✅ | How to Hard Reset any Motherboard | MSI B450M

[@SomTips]

📌Watch More Videos✅ bit.ly/somtips

[@galaxymc8286]

Tysm i was panicing after i overclocked my ram too far. Genuinely appreciate all the people making vids like this to help others out

[@asyxYT]

Hello I have a question galaxy mc

[@galaxymc8286]

@@asyxYT yes what is it

[@muzic_kidz1134]

Did your screen have a white little line on the screen in the middle left part? Cuz mine does. It stays black with that little line (btw the line is not blinking) and after about a minute it just goes to plan black with no line on it. the keyboard turns on but the mouse doesn’t. Do you know what to do?

[@galaxymc8286]

@@muzic_kidz1134 no I have no clue what happened, but check your motherboard manual to see if there are debug leds, these are usually on the right side of the motherboard and light up showing you whether you have a cpu, ram, gpu error

[@exzavion1329]

@@galaxymc8286 did your motherboard show what’s wrong ? Mine says cpu and ram I over clocked my ram also now idk what to do I took apart everything and put it back together

[@MF_Funkzz]

I moved 3 computers to different cases yesterday, swapped around GPUs, and had various issues pop up with booting. This saved me from having no video output! I thought I messed up massively. Thanks a ton!!!

[@flickmew99]

Did you got unexpected no signal problem?

[@reactgaming30]

My one showing standby mode🤣what should I do

[@asherodiong6122]

@@flickmew99 I did. Do you know how to fix it?

[@flickmew99]

@@asherodiong6122 when your PC is turned off try one of these : 1. try to clean ur ram pins with eraser, or 2. reset your motherboard by unplugging the C-mos battery and then press and hold the power button to sink the remain electricity

[@moksh954]

I messed up with my PC's BIOS settings, now my system shows blank screen. I had try this method of hard reset by removing CMOS battery and by Jumpers on motherboard. My Motherboard is working fine as CPU fan, Mouse, Keyboard is running. But Nothing has worked i.e blank screen even after hard reset of BIOS. Please help me to fix this.

[@Ruffy03]

I have the same issue, my pc restart every time it’s a loop, after I did a bios update, i broke my mainboard

[@marvinek3880]

@@moksh954 do you find settings?

[@marvinek3880]

you fix it pls help

[@nurakhavein1918]

@@moksh954 yo the same thing happened how did you solve it?

[@willturner99]

I cannot express how much I appreciate you making this video. I wish you a great and prosperous life.

[@SomTips]

So nice of you

[@frezzyfn-6]

@@SomTips I have a problem, so I bought a new Mainboard, The Gigabyte Aorus B450 Pro, I combined it with a Ryzen 5 3600 and 32 GB 3600 Speed ram from corsair, and with an m.2 ssd. But when I try to turn on the computer there is no signal, the fans are spinning and the ram is shinning but there is no signal on the monitor, In fact the Error led light, first it was DRam, the I switch the ram then its cpu, then with the original ram both light up. The problem is, the motherboard only supports 3200mhz and my sticks are on 3600mhz. Please can someone help me

[@turkerberkeyldrm5944]

@@frezzyfn-6 did you solve the problem I have same problem that you mentioned.

[@xRegyy]

You saved my pc this is the 2nd time it happened but, 1st time on my new motherboard I was gonna cry THANK YOU SO MUCH HONESTLY FROM THE BOTTOM OF MY HEART

[@RodolfoHernandez-sq3zc]

THANK YOU SO MUCH, I thought I killed my pc and I just got it a week ago! After following all the steps it finally started to work, I’m very grateful

[@SomTips]

welcome

[@chiraggupta5479]

@@NsuCozy no, just unplug your pc and start doing this within the cabinet make sure that there is no power cable attach and anything

[@everthoman7586]

Thanks for showing this, the trick of shorting the JBAT1 jumper with a screwdriver fixed my problem of being unable to access the BIOS settings after I had removed one of the DIMMs.

[@MrRed1987]

This 100% worked, I was trying to swap a CPU and it would only result in a black screen. Did this process.. worked first time!

[@bigj_93]

Just to confirm I'm doing this right : Power down pc - Remove power cords Short Jbat1 Remove battery Insert battery after 2 - 3 minutes Add cover Power back up Sorry if this seems dumb I done a Msi bios update and I'm getting a black screen. It's killing me here 😂

[@ziziics]

OMFG THANK YOU SO MUCH. I bought my pc today. I paid like 1200$ for parts and I somehow fucked up xmp and my pc didnt post after that. I did this and now its working. Thank you bro

[@SomTips]

welcome

[@CoCo_lovepink]

it will work on my mobo MSI A320M PRO VD/S after i update the bios into the latest version?i experience no booting after the latest update which shows 100% success...please help me bro

[@lyleagustin7931]

same problem

[@mtr2715]

Please tell me is it applicable to complaint of no display and fan running

[@Tes-of3tq]

Did you remove the jumper first and then remove the cmos battery or is it the same?

[@SomTips]

anything you can

[@_blind_mice7029]

In my case didn't need to use the jumpe/short JBAT1. Took the battery out after unplugging everything (all USBs/cables removed). Then I pressed the power button a few times. Then put everything back and the hdmi display was back. Worked just fine🙏

[@JoshDecroix]

You just saved my ass and my computer. Thx for the help, and god bless you.

[@jayjjay3235]

I’m praying this works , I overclocked my system . Everyone was fine then I tweaked the memory timing on the ram I’m praying this works like it did for others well see

[@jayjjay3235]

Worked wow thank you so much bro I swear I was about to start crying I thought my rtx 3070 was broke after over clocking . This 100^ did the job ongg I was about to send it in and get it fixed and all that . THANK YOU GOD BLESS YOU GOT A NEW SUBSCRIBER

[@DignityCFW]

@@jayjjay3235 hey bro I have similar issue I overclocked my cpu due to my gpu being too demanding for cpu I have I overclocked it and did proccess I’m now waiting 10 mins now with battery removed I don’t get no display and my intake fan stays in turn on mode normally changes to on but please tell me this works I’m so annoyed only had built pc 4 months ago

[@jayjjay3235]

@@DignityCFW ya it works bro i was bout to cry lmao, not really good with computers so i didnt wanna take the thing about but 100% glad i did . , just took the battery out for about 2 mins, put it back in and it worked. I actually messed with overclock again and screwed it up , tried the method and can tell you this method works 100% . Thought it was my RTX3070 at first cause no display but ya it was the RAM and taking battery out like video shows 100% works. good luck bro i know how u feel lol

[@GIOk2142]

@@jayjjay3235 I built a pc for my 9 year old brother who just plays minecraft and wants mod so i got him a i5 with a 1030 and when I try to get in the bios it shows a error with the battery it says it was changed or something, am not worried about the cost just dont want my lil bro to cry

[@titaniumx3712]

Thank you so much man! I was messing around in the bios...decided to underclock my chipset and my pc wouldn't boot afterwards. I wasn't scared tho...i knew i needed to clear the bios but i didn't know how to do that. This vid helped me out a lot...now no matter what settings i change it can easily be reversed if things become unstable and i can't boot. Thanks a lot! I owe you one

[@putin9128]

dose it delete anything from my pc??

[@rafayfn1246]

@@putin9128no

[@p.k.953]

Please help me also brother

[@p.k.953]

I followed the steps but didn't work 😭

[@ferumbras16]

When do you have to unplug your power source? Before pinning jbat1 with a screwdriver or before getting out the battery? 🤔

[@uniquex232]

My mobo msi b460m mortar bricked while using mflash from bios inside to update bios version I tried all methods like shorting pins, removing battery nothing worked Please help...

[@bigj_93]

Same issue here 😢

[@marvinek3880]

do you find any solution?

[@uniquex232]

@@marvinek3880 yes If under warranty go to service centre if not change it

[@nurakhavein1918]

@@uniquex232did you pay extra fees for service? cuz i messed up my bios settings and im scared motherboard is just dead at this point

[@asimhussain803]

By doing Bios Reset the windows and hard disk data will be removed??

[@SomTips]

no

[@ClickwithSourav]

Screwdriver when you touched in jbat 1 then power on or off that time?

[@ollie4425]

If I do this will my ryzen 5 5600 still work does it reset bios updates?

[@bingobaz6402]

Damn, got me back up and running. Didn't know what was wrong thought it was cables or my cpu. Thanks a bunch. Although why would this happen my mother board is only a few months old, so why would I need to do such a thing so soon?

[@joetee5105]

Omg thought for sure I bricked my board with Live Update. This vid saved my ass. Many thanks my man!

[@789Noctis]

If you're using msi, PLEASE don't use dragon center for update.

[@afterthought3109]

This really worked. It took a while for my pc to boot up but it did and that's all that matters. TYSM!

[@Mortatha_X76]

How much did it took to boot because i have waited about 2-4 minutes but it didn't boot at all

[@godshandftwfr]

Is this solution for everyone who messed up with bios and wants to reset? I didn't mess up but i have the problem.

[@afterthought3109]

@@Mortatha_X76 around the same time. In the video

[@afterthought3109]

@@godshandftwfr I think so, since you're just removing all the stuff that you did in the BIOS

[@godshandftwfr]

@@afterthought3109 thanks for telling me then..

[@schkhermer5249]

bro i replaced the battery but in 2 weeks later it happened again with CMOS checksum Error can i even fix it or should i get a new B360M motherboard

[@komradwide4660]

I want to replace the cmos battery with a new one WITHOUT changing the bios settings. I did a google search that settings will not be reset if a new battery is replaced before 1-5 minutes... Is this actually true??? Are there any other things that I have to do before replacing the battery? (like holding the power button for 10 seconds or touching pc case to remove static) An answer will be greatly appreciated :)

[@MascrisSensei]

Probably got the same problem but I let the professional do it today. Hope for good result

[@Meridiyen]

Hello guys, I had a similar problem yesterday. I set my rams to 3600mhz but in the wrong way at bios. I got no signal to my monitor. Nothing helped even the bios reset. The only solution was to take out the rams and put another ram stick. This helped my to get a signal and reach the bios. There you can change the settings and then you can put your previous rams back to the mainboard and everything should work. Notice: This would help you if you did something with the ram settings. Let me know if it works for you :)

[@alf8449]

Adzackly the same happend to me.

[@alf8449]

So I need to buy new ram ?

[@Meridiyen]

@@alf8449 you just need the new ram for a moment to set your settings from the bios back. Maybe you can take some from your colleague ...

[@flickmew99]

What if I got problem like this : My PC running for like few hours but suddenly it become no signal and no sound, but the PC still running (the fan, LEDs inside the casing still on), is this the solution to do it?

[@Meridiyen]

@@flickmew99 Did you change something in the bios?

[@lu_syd4473]

I love you man, I don't usually reply on things that helped me but this scared me thanks

[@lilbopeep6059]

I’ve troubleshot everything I can think of, went back and checked all connections, reseated the ram, pulled the battery etc. my fans kick on and everything powers up, yet I still get no feed to the monitor… I’m starting to suspect a dead motherboard but if the motherboards dead wouldn’t all that be affected?? Everything’s brand new. Any input would be appreciated. I’m dead in the water right now

[@SomTips]

try the method shown in video, if not fixed maybe processor or motherboard deAD

[@lilbopeep6059]

@@SomTips yea I tried everything in the video and then some. Have a tech buddy coming to look at it in a few days and hopefully he will have an answer for me. Tho I suspect he’s just gonna tell me the motherboard was dead on arrival. I’ll see if he can test the processor to further isolate but idk if he has a rig that’s compatible with a 9th gen I9(bought before I knew the performance of the cpu doesn’t really matter lol) Just curious could an older monitor possibly be the culprit?? I’ve tried on two separate ones but they are both older ones I had laying around (they are actually small TVs with rgb and hdmi ports) tried both ports and nothing on either one. Plugged in the xbox and both hdmi ports work.

[@Brendan_InOT]

@@lilbopeep6059 did you fix it because the same thing is happening to me

[@christianleon527]

Did u fix it ? I’m having the same issue and I’m thinking the bios on the motherboard needs to be updated to be able to communicate with the cpu

[@bearmanroar7117]

I’m having the same issue with this pc I just built. Everything’s turning on and the rgb works but I’m getting no display on the monitor and I can’t get the bios to pull up. The keyboard doesn’t light up so I tried another keyboard and that one only lights up for the first second. Did you guys ever get it fixed? I’m watching this video now none other were helping me

[@senjui2046]

So do I plug it in to short circuit it then plug out when I take battery?

[@muzic_kidz1134]

Did your screen have a white little line on the screen in the middle left part? Cuz mine does. It stays black with that little line (btw the line is not blinking) and after about a minute it just goes to plan black with no line on it. the keyboard turns on but the mouse doesn’t. Do you know what to do?

[@FerreraNaig]

I have the sams problem, did you manage to fix it?

[@elbossadham1546]

does that work in case the electricity went off during bios update?

[@alpha_msz2245]

The battery Trick always works haha thanks so much i messed up with some new Ram and everything went black I was having heart attacks, panic attacks and nervous breakdowns until now

[@dindunk]

Thanks for this video. I tried to update bios via msi dragon center (i know, worse idea ever,i learned the hard way) no picture display afterwards. Reset by jumping the pin, it works now! P/s: I'm uninstalling msi dragon center as i typed this comment. Lol

[@hakimcribs2556]

Can it be done without removing the battery? Only short the JBAT1..

[@SomTips]

yes

[@derpherpp]

Why are you using dish cleaning gloves while poke your mother board with a large screwdriver. LoL

[@Mr-Singh_]

Bro i dont what happened to my mobi, but whenever i start my pc the ez debug led stays on at vga for 30-40 seconds and then boot up.

[@marvinek3880]

jbat and baterry thing doesnt work after changing onlycpu mhz, any other ideas

[@JaySZN3]

Do I have to remove every component on my pc for this to work?

[@aubameyangorigins5550]

Thankyou so much sir. It's work. 😍 my PC in trouble because I trying to set PC to dual monitor, and that's what i get my PC is stuck on BIOS. Grateful to you 😍

[@Ansariq80]

when you are doing these steps, does you pc have to be on? does the pc have to be on when you are removing the battery?

[@SomTips]

fully powered off

[@SmoothCactus]

HELP PLEASE. My pc is turning on but no display and I unplugged my pc i took off the cmos battery and I put it back agian for about 5min and my pc didn't turn on.

[@marilyngullette2059]

thanks that worked for me. You're a live saver. . Greatly appreciated.

[@calp1989]

Why use gaunlets? is it dangerous if I dont use them?

[@Metalizer19]

Got This in my Recommendation and you saved my Life Thank you so much and youtube of course ❤️

[@hammertime1824]

How do you take the gpu out and how do you cep your self grounded with out a anti static wrist strap

[@eliesah86]

Hi, Thanks for the Video. It doesn’t work for me. I‘m still getting a black screen. I tried all ports in the motherboard and graphic card for the screens. All the fans are working and multiple LED‘s are working on the Motherboard but I‘m getting a black screen. Can somebody help me Please. It‘s a MSI B350M Mortar. Thank you

[@DAR3_TO_WIN]

While flashing my BIOS, the power went off and now nothing is coming up. Will this method work for that?

[@ripsterthorpe1478]

Yikes your mobo might be dead hopefully it didn’t brick everything else

[@derangeddoffy]

Similar thing happened, reflash the motherboard.

[@DAR3_TO_WIN]

@@ripsterthorpe1478 Hello, thanks for the concern, thanks to gods though, this method has worked and I'm saved :)

[@DAR3_TO_WIN]

@@derangeddoffy Try this method mate, I'm sure it'll help if it's a B450 MB

[@derangeddoffy]

@@DAR3_TO_WIN i reflashed and it fixed

[@natyv3092]

Thank you so much i love you i thought my PC was long gone but you really helped me

[@bitzyeahme]

Must be unplug all cable?(pcie,vga,ram,and other)?????

[@ayzeez]

Thanks you so much this worked for me i had changed some ram settings and it ruined some stuf but this 100% works

[@tamthn.t]

Does it work for Intel CPUs? Thank you for helping me answer!

[@SomTips]

yes, because it is motherboard issue, not cpu based

[@tamthn.t]

@@SomTips oh ok, thank you so much for the reply.

[@madhavgupta1721]

Hey bud!! I cannot find the jbat1 thing in my motherboard it's h61 chipset motherboard what to do?? Answer ASAP

[@bowdy4952]

Hey, after this when it says to load defaults or run the setup, which one should i press?

[@MarthinLutherS]

Just press F1 or any key you are instructed to on your monitor

[@ommusicalsurguja185]

बहुत-बहुत dhanyvad sir ...main bahut pareshan tha thank u

[@pubdroxeditz2385]

Bhai kya baaat hai maine galti sebapni ram 3200mhz pe kardi thi Bhai thank u so much bro so much thanks bro u r amazing I appreciate it man thanks alot 👍👍👍

[@rohanthe123456]

I'm facing this issue for my msi laptop gt72s 2015 model. Not able to access bios settings, after switching on the laptop just blank screen is there nothing else.

[@stromvipergaming3533]

Will changing CMOS battery will fix the problem? I need to reset CMOS every time for turn on my PC

[@SomTips]

only 1 time

[@JoeFromCanada93]

Thank you very much, I had a spare reset switch lying around and it did the trick!

[@owaisplayz8227]

Bro I enabled secure boot when I saved and exited the bios it is not working Just black screen Please help me bro I tried removing cmos battery

[@rxahs]

Do you happen to know any fix to why I am stuck on the BIOS screen? My pc wont go past this screen after I installed my new RAM sticks.

[@daeskk]

hello my msi motherboard model z97 is with a blue led blinking which I found out to be debug mode. how to fix it? thanks

[@pro_grammeryoutuber1423]

PLS REPLY😓 Does this work in motherboard msi a320M- A pro max?

[@SomTips]

yes

[@pro_grammeryoutuber1423]

@@SomTips WOW this guy is still replying in every comment

[@pro_grammeryoutuber1423]

@@SomTips then i will try bro💪

[@conquer.motivationq]

THANK YOU VERY MUCH!! I overclick my ram too much and my pc didnt turnd on anymore, this fixed it!! Thank you

[@xeh9057]

Would this work if my pc turns on but I have no display

[@justalex6594]

Yes .ine had same problem

[@lukasaoo88]

Not for me

[@gs8436]

hi, Im using MSI X570 Gaming plus.motherboard is not detecting more than 2 graphic cards?

[@Vasiliss24]

1000 times THANK YOU!!! I WISH YOU ALL THE BEST IN YOUR LIFE

[@BM-wf8jj]

Very helpful video. If I can make a suggestion though, I think you should add captions to your videos if you want to target English speakers. Your native accent is very thick and you speak fast which makes it hard for your audience to understand what you're saying sometimes. Other than that, thanks for the tips! I thought I was going to have to replace my motherboard! Lol.

[@roystat12]

Hola, buen tutorial pero tengo una pregunta, es necesario quitar la placa madre del todo y despues realizar los pasos o solo apagar de la corriente es suficiente??? Espero su respuesta y gracias.

[@bain6317]

Просто питания выключить будет достаточно

[@reviewsbymohitmybloggingid4241]

After doing the removal of everything, pressing power button many times it starts but shows boot device not found, then I need to change the bios settings and other things. I also found in one test that there is error of partition table. PC is working, but the same problem again and again is time consuming. What can I do?Now it is not starting.

[@SomTips]

replace the battery

[@xGamingWithJasonx]

I have tried everything to reset my Bios nothing is working i messed with settings in my bios and now no display not keyboard but my mouse LED RGB lights come on i dont get why nothing is working with this board its the Gigabyte B450m DS3H Wifi mobo with a ryzen 7 2700x i dont have another CPU with Integrated graphics to test the onboard graphics to switch everything back sadly, i just have no idea what to do

[@austinsherwood7188]

Pc shows no input, took out cmos waited 10 minutes put it back in and it powered up! It said “reboot and select proper boot device” so did that and brought me to another screen with a drive 1 but clicking that reverts back to first thing. I’m able to get into bios menu but kinda lost. This build worked fine for years but not sure why it just started doing this. Any help would be greatly appreciated!

[@jackturner3867]

Try joining the kkk

[@austinsherwood7188]

@@jackturner3867 what I ended up doing!

[@aqua8645]

I just builded my first pc ,and it’s working ,but I can’t use keyboard for the first bios turn on ,help me

[@muhdrdzn1038]

broo u really helpfull 😭 thank u my pc boot up now . i appreciate it .

[@AllLogin-k1q]

Tnx u so much vaiya ... My system is fixed... ❤❤❤❤... Tnx u so much brother

[@tomnnguyen4845]

Thank u so much! it worked now after I swapped my gpu

[@qoriyusuf244]

Help, i'm using msi a320, after bios update it become blackscreen, i have cleared cmos using manual guide but its doesnt work, i have removed battrey and back it but the problem is still.

[@sanchitsalve8979]

Thank you it worked🥺🥺🥺❤I was scared

[@mehraproductionkathua9343]

Bhai yadi motherboad ka bios update kiya ho wo b reset ho skta hai kya

[@rubberduckyj326]

THANK YOU SO MUCH!!! I dont know specifically what I did but with your help I understood what I did wrong and fixed it

[@eusuntalinarea2015]

Wow i can t believe this tutorial has worked PERFECTLY thx indian Love India so much thanks bro i appreciate

[@lemarz8006]

If it’s not work for me what else can I do? I remove CMOS battery and still black screen but I do not overclock too heavy :((

[@keylo4066]

Have you fixed it yet i have same problem

[@lemarz8006]

@@keylo4066 I took it to a shop to get it fixed lol took like 5 minutes and $15. I tried for hours but nothing worked

[@keylo4066]

@@lemarz8006 not bad for 15 i might try that

[@vincentgerrald8123]

Thx man this fixed my fans staying in after shutdown

[@daddychill1851]

Bruh i freaked the fucked outta me.... thought i broked my motherboard somehow...but after watching this video it's fixed!!!

[@Mew_York_Kitty]

Bhai I love your Desi accent, I'm from NYC - sincerely appreciate your support! :-)

[@SomTips]

Thanks a ton

[@hevo1890]

Will what happens when you try all this and still no signal? I done everything and still not working?

[@ilhamrifqy2]

Hello bro should we remove all the power socket?

[@SomTips]

no, just switch off from electric board

[@VR8D]

Thanks bro saved me 😭😭❤️❤️

[@njeckchick9278]

Please I tried updating my bios for Dell precision m3800 but during restarting my laptop screen goes dark but my PC is still running I have force a shutdown And tried to on my PC but the screen remains the same Please what kind I do?

[@johnlenardteodoro4321]

Hi when i click the F2 to enter setup utility it's go black screen can't go to bios

[@SB619og]

I just built my pc and my CPU light won't go away I tried this and many other things but it doesn't seem to go away if you can help me then that would be appreciated

[@bloodyshot093]

Thank you very much bro 😊❤️ you save my 🧬 life first I do it it didn't work but second time it worked really well 😃

[@lvlgains]

Thank you so much. I thought broke my pc on my first build. You saved my ass.

[@cHaOsDEVIL8720]

Hlo

[@cHaOsDEVIL8720]

What happened to your pc

[@PsychoTsundere]

Did i just brick my mobo? Everytime I turn on my computer it throws me to BIOS Recovery usually I just press esc and then enter and then it will start windows normally this has been going on for weeks and i just ignored it but when I tried it today I saw a different option. Being stupid and curious, i tried to click that new option which says ">PROCEED WITH FLASH UPDATE" when it told me to press ENTER key, i did that but it never rebooted. My pc was still ON but my monitor isnt receiving or showing anything. so i decided to force shut down.. so far this is what i already tried >unplugged and pressed power button for 30 sec and tried to switch it on >removed the mobo battery for a few mins and then put it back again. both of those didn't work i didnt want to tinker with it further since i just got it back from the pc repair shop and im sure everything on the mobo is intact and plugged snuggly. so can anyone tell me what happened to my motherboard? did i break it? btw if it helps my motherboard is an emaxx a70fm2+icafe any advice will be appreciated

[@kravmaga7070]

DOES THIS WORK ON B 350 MOBOS? i updated grub via terminal in Pop OS and instantly upon restarting my computer would no longer boot. But i could still post and get into bios so i tried changing some boot options and now my computer wont even POST. fans and diodes all light up on rx560 gpu, b350 mobo, debug lites go off after few secs but screen stays black entire time. measured v rails at this time and get 3.08. 5.07. 12.07 on rails, cleaned out psu and inspected for burn marks or bulging caps, none. no bulging caps on mobo or gpu ive removed the battery and shorted jbatt several times. tried removing boot m2 drive and tried a spinning disk, all for nothing. how does this happen?

[@SomTips]

remove hdd & nvme & see manufacurer logo or bios opening or not

[@kravmaga7070]

@@SomTips nope, no post no nothing just black screen

[@samareayya1961]

Hey man, I got the intel 10th gen MSI MPG Z490 Gaming Plus motherboard and this does not work for it. Unfortunately, it does not have a BIOS flashback button. So currently I'm option less and tried everything that I knew. Hope you can help. 🙂

[@ivannabalzan1699]

Hey there, hope you're fine! This worked for you? I have the same z490 and its not working. :(

[@samareayya1961]

@@ivannabalzan1699 Claim your warrenty

[@mas.cimenks]

Great brother for tutorial. Say thanks From Indonesia 🇮🇩🙏

[@gobagobagoba1279]

I'm using a msi meg x570 ace mother board and rayzen 9 5900 cpu everything works except screen wont turn on and it shows 00 error code on mother board . Would your method work for me ?

[@SomTips]

don't know, just try