Fix Jetronic TPS & Aux Air Problems FAST with This Simple Trick!

[@MrJearley6]

Thank you so much!!! You helped me fix my 75 280Z !! AAR was dirty I clean now Z starts right up!!! Thank you!

[@Itsallaboutthebuild]

Fantastic 👍👍👍

[@MrJearley6]

Thank you for this video!!! I have same problem with my 280Z !! I will try thank you!!!

[@Itsallaboutthebuild]

Glad it helped. Fixing the existing aux air valve only worked for a few months. I started having bouncing idle and ended up replacing the aux air valve with a used aux air valve from eBay. Idle is nice and smooth again.

[@mrkat8137]

Dang I can’t figure out what’s wrong with mine whatsoever.

[@Itsallaboutthebuild]

Maybe some other vacuum leak?

[@mrkat8137]

@@Itsallaboutthebuild after your video I decided to do some testing and noticed I got no continuity pin 108 for the air regulator. So I’m gonna see if the air regulator is fine or not later today. 🙏

[@Itsallaboutthebuild]

@@mrkat8137 Hope you can figure it out, keep us updated 👍

[@mrkat8137]

@@Itsallaboutthebuild the air regulator is bad 🙏 I’m getting no continuity on the part itself but the connector is just fine. Hmm however I’ve got a turbo and so I’m not sure if I’ll find a replacement

[@Itsallaboutthebuild]

@@mrkat8137 ours was bad too. We ended up buying one from an 80’s Nissan 300zx on Facebook. They work and fit pretty much the same 👍 Good Luck my friend 🙌

[@ashleysolis5921]

And then your Wife blew out the turbo on a test drive...😂