Fix Nintendo Switch Sd Card Reader Connector (Connector Replaced)

** We fix all game consoles and offer free estimates: www.gogamers.com **
** Send us your game console to be repaired: www.gogamers.com **
TOOLS USED IN VIDEO:
Solder equipment:
Solder iron - amzn.to/3FdWycy
Solder tip - amzn.to/3tbRUcQ
Solder Tweezers - amzn.to/33ijwSS
hot air station - amzn.to/3FhfOpz
MICROSCOPE EQUIPTMENT:
microscope - amzn.to/3qbg3OV
microscope lens - amzn.to/3GhmntK
Microscope led - amzn.to/3GgHZ9M
Cheap Microscope - amzn.to/334LP7s
SOLDER TOOLS:
Solder - amzn.to/3f9SeAM
Insulated copper wire - amzn.to/3FbQcKX
Kapton tape - amzn.to/3r5edhO
Tweezers - amzn.to/3FdDOdt
Blade - amzn.to/3tdXrzK
Freeze Spray - amzn.to/3FbQEc7
Flux - amzn.to/3qdOYKI
Conformal coating pen - amzn.to/33m38jW
UV flashlight - amzn.to/3Ggd1hP
Desolder braid - amzn.to/3HUDQst
Heatgun - amzn.to/3naTSq2
TESTERS:
Voltage amp tester - amzn.to/331Vrjj
On Screen Multimeter - amzn.to/31KTo2w
Cheap multimeter - amzn.to/3feHMaV
BENCH STUFF:
Workbench - amzn.to/3FbuEya
Chair - amzn.to/3qaMJbe
Soldering fume extractor - amzn.to/3f5WSQf
Mat - amzn.to/3FbGLv0
Outlets - amzn.to/31L6jBA
Disposable gloves - amzn.to/3GcWCef
Fine tip snippers - amzn.to/3tdm2Vp
Iphone cable - amzn.to/3qaNscs
Air compressor - amzn.to/3zQvXl2
SCREW DRIVER AND DRILL:
Mini Drill - amzn.to/3K8rKhp
Torx bit set - amzn.to/3f89Gpb
Phillips bit set - amzn.to/34vHCdb
CAMERAS AND MIC FOR MY SETUP:
Main Camera - amzn.to/3zG1gPo
Main Camera Lens - amzn.to/3FaBzrm
Overhead camera - amzn.to/3GfbkkD
Microscope camera - amzn.to/3qaX32X
Mic - amzn.to/34vIvT3
Capture card - amzn.to/3f8wF3t
In this video, I'm going to show you Fix Nintendo Switch Sd Card Reader Connector (Connector Replaced)
FIXING the Nintendo Switch SD card reader connector issue can be difficult. If you are in need of a repair please contact us to organize your repair! We have replaced 100s of Nintendo Switch SD card reader connectors in our stores.
-----------------------------------------------------------------------------------------------------------------------
If you love local video game stores make sure you check out any of our locations in Omaha and Lincoln Nebraska. We have been open in Nebraska for the past 26 years and we hope to continue to serve!
50th and Ames Omaha
124th and Center Omaha
27th and Superior Lincoln
[phone] call us today or check out our website at gogamers.com/ if you are wanting to get a repair done!
gogamers
omahagamers
omahagamers
#OmahaNebraskaVideoGameStore
If you need your Nintendo Switch SD card reader connector repaired please goto gogamers.com/repair

[@JohnnyCanal]

How much do u typically charge to replace this connector and my power connector just came off

[@tekgeekster]

I wish I consulted this video. I just melted my replacement.

[@jessicay1834]

I never done it before, but need to get my switch fixed. what flux is it in this video ? AMTECH NC-559-V2-TF Flux 10ml or MG Chemicals - 8341-10ML 8341 10ml ? temp 440 degree with 40% wind ? and seems all you need is the heatgun ? what heatgun are you using in this video ?

[@ykmdeez]

Hey man I got a question abt an Xbox 1, so My power bank flashes white and orange when I plug it into my Xbox but when I take it out it’s solid orange, when I press the power button when it’s on it on for 2 seconds at most, I spilled a little water in it probably a scattered half a teaspoon but I don’t know exact what the problem is, could you tell me?

[@arie1293]

Wondering if you’ve ever come across a switch that appears to work normal but won’t read a particular game cartridge when the sd card is also inserted. I’ve scoured the Internet forums and no one else appears to have ever had this issue. Mine is a switch lite that I replaced the usb connector on and thought all was good until I tried a Diablo III game cart in it. Wouldn’t read it but reads in three other switches just fine. Remove the sd card and it reads in the switch lite. All other games I have read fine in the switch lite with sd inserted. 🤷🏼‍♂️

[@DAVYSGAMINGDVG]

Wish i could do stuff like that! I put my switch in the repair last week for sd connector replacement, When i insert my sd card my sd reader started to smoke and i was like no way! It burned my sd card + my reader so now i did put it back in the repair shop i hope nothing will be damaged! The switch still worked fine what do you think?

[@MrMuameRR]

Same problem i have 3 pins missed where can i buy this sd motherboard input?Please someone answer.

[@Chaxlotl]

i replaced my switch's sd card reader recently but the sd card reader doesnt stay plugged in for some reason it requires me to readjust it sometimes because it stops connecting

[@kevinstoner7471]

About how much does this repair cost?