FIX PROBLEM NUX MG 300 SWITCHER ERORR!!!

[@asmokun]

Glad I didn't break mine while doing this. What a pair of crappy buttons, thanks for the help I was going crazy.

[@iNtimidate770]

Thank you ! fixed mine following this video. I used a thermal pad, the ones you use for computer GPUs and same result.

[@accentontheoff]

Any idea why this happens. It seems to be a common problem.

[@zuu8609]

Hello. All i need to is to put a double sided tape on the footswitch?

[@langgengwibowoklub1870]

Makasih mas, ini switch mg 300 saya jadi normal dan nggak keras lagi 🙏

[@afiffahrurozi]

Sama2 mase, sy jg senang jika vidio ini bermanfaat, klo swicthny kumat lg lepas sj dobel tapenya dan ulangi stepnya (dobel tape di lapis 2)

[@langgengwibowoklub1870]

@@afiffahrurozi siappp mas, maturnuwun info nya 🙏

[@hendyrahmatullah542]

@@afiffahrurozi mksdnya yang bekas lama dilepas KH mas

[@afiffahrurozi]

@@hendyrahmatullah542 ya

[@hendyrahmatullah542]

@@afiffahrurozi siap mksh bang

[@rklprmt]

Kmrn pnyaku jg bgitu mas, tpi setelah disemprot pake pembersih lensa (lebi bagus lg klo pke contact cleaner), Switchnya sdh berfungsi sprti semula

[@afiffahrurozi]

Semprot bagian mana? Tak tempel solasi karna susah buka bagian pcbnya

[@rklprmt]

@@afiffahrurozi disemprot dibagian switch mas, setelah itu di lap n diamkan sebentar, cara ini kmrn ku dpt dr mg 300 sharing group di fb mas

[@afiffahrurozi]

@@rklprmt brti lepas semua pcbnya trs semprt bagian tengah switchnya?

[@rklprmt]

@@afiffahrurozi bisa dilepas klo mau bersihin secara merata mas, tpi klo mau cepat, bs lewat switchnya saja n g perlu dilepas

[@afiffahrurozi]

@@rklprmt ooohh. Gtu. Lewat atas lsg semprot perlahan biar cairanya masuk gt ya?

[@hericf3664]

Nyimak hobi 🎸

[@afiffahrurozi]

Mantab

[@waynegaor1543]

Is that a regular double sided tape or the foam one?

[@afiffahrurozi]

Double tip 3M

[@tirtaade1851]

Tanya mas!! Klu monitor nyala tapi suara ga keluar tips nya gmana yah?? Tks.

[@afiffahrurozi]

Maaf. Sy krg paham dg pertanyaannya.

[@hadianbekti7386]

Mas nux mg 300 saya . Kalo pindah bank atau atau pindah preset suaranya ga balance volume nya . Kadang feed back n noise . Kenapa ya kira2?

[@afiffahrurozi]

Coba copy presetnya. Misal preset A dicopy ke B. Biasanya bunyi itu terjadi krna beda setingan efek dan amp

[@Ibander2007]

what tape did you use for that one?

[@afiffahrurozi]

Nippon double tape

[@tadwarben8465]

Bro, I have the same problem, but my left switcher (loop switch) is the one that is not working. How can I locate the left switch once I remove the case? I haven't open my NUX MG300 yet, but can you help regarding about this?

[@afiffahrurozi]

You don't need to open the case, but you only need to paste double-sided tape over the switch according to the video

[@jameslightningappleby]

@@afiffahrurozi I have this same problem. I cannot access underneath the left switch. I have a gig in 2 days I need to fix this for 😱

[@reynoldbanea6146]

Mas mg 300 saya klo masternya full, suaranya sember. Itu kira2 kenapa ya. Mohon pencerahannya. Makasih

[@afiffahrurozi]

Seharusnya tdk masalah, mngkin spekernya yg gak kuat nerima suara yg terlalu keras

[@iiygaming5937]

Semua tombol berfungsi,tapi ga bunyi yg rusak apanya?

[@chequitoize]

Yeahhhh!!! Youre the best!

[@horream6561]

Mass,, kalo mau ganti Jack output nya gmna yah,,, punya saya kalo Jack nya masuk full pelan sauarana kalo stngah malah kenceng?

[@afiffahrurozi]

Ooohh. Klo itu bongkar semua mas, bawa ke tukang elektronik aj pasti paham

[@jayQT0107]

no power sir can you fix

[@thepakayas]

Bro mau nanya nih,kemaren gw beli nux mg300 brp hari kemudian gw update tpi setelah di update malah mati 🙈 mohon bantuannya hehe 🙏🙏

[@afiffahrurozi]

Proses updatenya ud sesuai dg petunjuk yg ada di webnya? Sebisa mungkin pakai usb yg bagus juga

[@thepakayas]

@@afiffahrurozi udah sesuai bang, udah sukses malah, nah pas di cabut kabel adabtornya trus gw colok lgi malah gak nyala2 🙈

[@afiffahrurozi]

Skrng masih mati? Klo kartu garansi/nota masih ada bisa wa ke nuxnya lgsung ni nomernya "081219150203" tinggal tanya2 aj disana

[@thepakayas]

@@afiffahrurozi iyaa masih mati bg. Oke deh makasih infonya bg.🙏🙏🙏

[@simulmul6845]

Muantapppppp

[@franciscoacosta4432]

Hola ! Que material usaste ?

[@afiffahrurozi]

Double foam tip nippon

[@gonzalogiraldi6669]

Sabes que material es??

[@fauzanajang8331]

Mas punya ku habis upgrade firmware gk hidup lagi. Kenapa ya???

[@afiffahrurozi]

Wah kurang tau juga. Langkah2 updte ud sesuai dg tutorialnya di webnya?

[@secuilfakta_]

Selain double tip, penggantinya bisa apa bg? Soalnya saya jg error kek gitu🙏

[@afiffahrurozi]

Bongkar total kesingnya. Dicek dlu switchnya masih fungsi atau gak. Klo masih fungsi per yg ada di switch tarik sampe renggang. Pasang sprti semula

[@secuilfakta_]

@@afiffahrurozi takut bg ncbnya ntr patah

[@secuilfakta_]

Barusan udh kelar bg, cuma ku tempelin plaster hitam udh bagus

[@afiffahrurozi]

Cara paling simpel emang sesuai vidio ini.

[@jonathanarleys]

Punya saya juga gini masalahnya, masa iya karena aus saja?? Wah, sudah beberapa kali buat performa main jadi menurun sebelumnya, terima kasih.

[@bayonkbayonk8099]

Sudah normal kembali om?

[@jonathanarleys]

@@bayonkbayonk8099 Sudah, karena masih ada garansi jadinya diclaim aja ke Nux lewat dristibutornya...

[@irwanboroofficial]

mas klo abis update firmware malah error suaranya itu gimana ya cara ngatasiinya ?

[@afiffahrurozi]

Erornya gmn?

[@tehjahe]

Itu cuma di tempelin double tip ya mas switchnya?

[@afiffahrurozi]

Ya. Persis yg sy praktikan di vidio

[@tehjahe]

@@afiffahrurozi sampai skrg normal ??

[@afiffahrurozi]

@@tehjahe ya

[@secuilfakta_]

Tempelnya di bagian mana tuh bg

[@miguelvaldivia7938]

Hice lo mismo y no me funcionó

[@mauromendez6752]

Qué material es?

[@miguelvaldivia7938]

@@mauromendez6752 , creo que conversamos en otra red. Si abres el pedal y lo pulsas con los dedos y no funciona es porque debes cambiar el pulsador.

[@ichangwae4793]

Di taroh di bagian mana nya mas, gk klihtn

[@afiffahrurozi]

Ditonton mas jgn dinskip. Ada fotonya dintaruh atas switch. Di vidio tdk sy bongkar

[@howgreatisourgodgreatminds3032]

If only you can explain in English and slow down the video. That is the exact thing my unit is going through

[@afiffahrurozi]

you don't need to understand the language, but you just need to imitate exactly like the video I made, if you don't understand you can repeat slowly, . if you don't have the same problem

[@afiffahrurozi]

you just need to put a double tip on the switch according to the picture according to the video