NUX MG-300 Firmware V3 - Quick Walkthrough

[@chedu77]

The MG-30 IR block would have been nice. But please make user slots available to load IRs on the unit, not per preset

[@rafa_guitar]

Totally agree with that!

[@Guerrerosdelcosmomx]

that would be very good

[@Worlds_Worst_Guitarist]

Waiting for "Patch Level" a long time. Great!

[@pie-vd5qq]

Some bass patches and amps would be amazing

[@santopapap4589]

The FW is available right now in the website.. i just updated mine! very good!

[@Jonny-wu6gk]

Imagine if they can actually put an additional "fx" block where you can stack two delays or overdrive in one chain. It will become more powerful!

[@gabrielserrano9911]

Yes, please.

[@derickvisitacion7627]

Yeaaaaahhhh!

[@emmanuellara5166]

Hi guys. Question. What if i use another independent pedal, lets say another distortion. Will it work or is it gonna sound weird?

[@bartnettle]

Well Done! Keep up the great work

[@Guerrerosdelcosmomx]

It's good to know that a new version is coming, I hope the whammy problem is solved since it is useless as it is currently, and add another heavier metal zone type distortion pedal, greetings

[@sukoshidameband23]

hollow years so sweet ❤️

[@IHSisable]

that acoustic amp sounds really good if you plug in n acoustic guitar

[@huypham8205]

exactly

[@samratbose443]

Is the update available now? I cant see it on the website.

[@АртемИгнатьев-у4у]

same

[@rafa_guitar]

same

[@cesarbermeo4605]

Same

[@FelipeLima-xt5qk]

Coming soon.

[@dyemyandre]

show me this message "This device is domestic version . Please updatee with domestic firware" how i´m back to "Domestic firmware"?

[@whj812]

Was hoping for a 5150/6505 amp model. :( Either way that patch level option is sweet.

[@alexvalladares3608]

Same here i'm even thinking about selling it, i dont' understand why there's no 5150 amp !!

[@lucamagarotto1295]

Thanks! Very good upgrade

[@88mrriss]

On the acoustic amp with the impulse acoustic response I get buzzing noise when I play the low strings on my electric guitar. How to fix please? It’s unplayable right now. I turned the gain down, the level.. nothing helps.

[@krystianraul791]

I have the same problem, big buzzing on low strings no matter what settings on acoustic amp preset, totally unplayable... and also broken tuner (stuck on Bb), also known problem, what a trash update...

[@Ivant3c]

I have the same problem, hum in all the strings, really bad sound and the tuner does not work, bad update

[@88mrriss]

@@krystianraul791 maybe it’s just settings we need to understand what to do? The tuner works nicely for me.

[@krystianraul791]

@@Ivant3c did a re-update again to v3, factory reset, pedal calibrated, still same problems - buzzing, unplayable sound on acoustic amp presets, not working tuner (now it doesnt show anything, like i'm not playing or volume on 0, but the sound is there...). I'm downgrading it to v2 and wait for new updated version with bugs solved, this is pure trash update.

[@krystianraul791]

@@88mrriss there are videos that people just choose an acoustic amp on quicktone app and just play, sound is great, no buzzing, did the same and it's trash sounding... and it seems that not we only have this problem, so it must be something with the firmware

[@lazyarrangements1197]

Hi, After the update, the Jam section has gone crazy! the left switch makes the drum play and there's no way to stop them except turning it off. Edit: I just re.installed the firmware. It works like charm!

[@lazyarrangements1197]

The loop and jam section is the most fun feature in Nu-x. Please do fix it. Thanks!

[@danielarrizabalaga5246]

Waiting!💪💪

[@tonakkie635]

Are you planning an update where there is also the touch/auto WAH effect available?

[@EdoKeys]

Nice video! Question: How can i record the dry out and wet signal at the same time?

[@anthonypaul79]

hi nice video. im having problem connecting the pedal to my pc. it keeps saying connect usb to the modular . do you have any suggestion . much appreciate .

[@nuxaudio]

Please make sure you're using the correct version of Quicktone your MG-300. Also, make sure you are using a USB data cable, not a charging cable. And finally, please ensure that you're plugging directly into a USB port on your PC, not a hub.

[@giuseppemiceli5782]

Can someone help me? Since I installed the new firmware v.3 the pedal no longer works well. It does not connect with Quick Tone.

[@muhammadramdhan1089]

please help me, i have done the pedal callibration, but still there is no sound in quick tone.

[@ranzellatienza7427]

Hey that's Hollow years by dream theater 😅

[@lux2329]

add bass amps and patches would be amazing

[@mathlovin2667]

I updated the firmware and now tuner does not work. Also, i couldnt stop the drum machine so i unplugged the unit. Really weird, can i install the previous firmware?

[@samratbose443]

Reinstall firmware using old updater (v 2.0.8) it will work.

[@Henry-fy2uv]

tuner doesnt work with v3 firmware

[@pramathanaekiki6003]

when is the update gonna be available at the website?

[@tonakkie635]

Adding a touch-wah and the auto record function for looper would be great, 😊

[@GeorgeBonez]

I can’t get my pedal to connect to the Pc. When I connect the USB cord it does bring up the outline of the pedal board on the screen but there’s no buttons or anything I can click on??? Anyone have any ideas?

[@castrobraian]

Hola. Pudiste solucionarlo? Me pasa lo mismo.

[@rebeccaalley9013]

I can't find it on the website.

[@cesarbermeo4605]

Same

[@jagricerra9137]

available just now! check it

[@ivanhuanca9082]

can you use this unit a Midi Controller?

[@ILLRICARDO]

Can you please make a mg300 without the expression pedal?

[@KPOPuptodate]

there's a bug on loop mode in this new firmware

[@syfyqry9851]

if it says nxp fail on the screen, what's the solution?

[@IvanMursal]

I have problem with my MG-300. when I pluged my MG-300 to my PC first time,and open QuickTOne App why it's detected MG-30? so, I can't do anything (copy presets). any solutions for his problem? **

[@alvinwan5158]

Hey Nux it doesn't work for mine

[@cristianrosas9496]

Hi man. I execute the update firmware v3, now some preset sound with high volume and other with low volume. If I adjust the level or gain for each preset sound ok... but i cant set the factory presets... did you have this problem? (I applied the reset factory, calibrate the expression pedal... and the problem persist)

[@yielddeerfarm3094]

The tuner not working after update and that was important and need to work why

[@rajanbaidya994]

Could someone give me the link to download the firmware please

[@antoniilham3639]

how to revert to firmware V2...?

[@rafa_guitar]

Please, where is the v3 firmware available for download? Thanks in advance!

[@rafa_guitar]

It is already ion the web!

[@marcopaulosantos]

so... where is it?

[@_giano]

where can I find the firmware?

[@cupaierockstore8]

is it already release on web?

[@jonanavarro89]

Tuner doesn't work and jam section goes crazy (no stopping until turning off). How could I fix it? Otherwise I'll go back to v2, but I cant'f find where to download it. Can someone help me? UPDATE: I reinstalled the v3 firmware again with the level of the expression pedal at minimum. I don't know why but now it works nicely. Problem solved. Hope this is helpful for someone.

[@ayantv7134]

Great new features sir! But i'm hoping that reverb fx must to improve the ambient tone wholly sir:)

[@RafaelLinero77]

Hi, when is going to be available in the nux website? And do I have to go back to the factory firmware to install the new one? Thanks!!!

[@jagricerra9137]

available just now!

[@thiagorodrigues2539]

Is there any possibility to make this v3 firmware for Chinese version mg300?

[@jagricerra9137]

the FW is availabe right now in the website!

[@kbomb5979]

Can someone tell me how to do this on windows

[@nuxaudio]

What specifically did you need help with?

[@kbomb5979]

​@@nuxaudio it never said to export the file

[@musmike_636]

do you need to back up the preset or not if you are from v2

[@nuxaudio]

It depends on how much you like your own preset.

[@NikitaKotlarov]

@@nuxaudio I have just updated. But the .nuxpreset from the old FW crashes the QuickTone. I tried many times with multiple backups. Crashed every time. I tried using the new FW backup and restore and it works. I really really like my own presets and took a very long time to perfect them on V.2. Does it mean that I can no longer use them on V.3?

[@krya4881]

Where the update?

[@theway4046]

what are you doing from 1:25 to 1:35 i cant understand.

[@blackpearl7676]

We need update for cerberus broo !!!

[@daverodriguez1018]

Nice

[@-gassswsignal1447]

+1 Super!!!

[@howgreatisourgodgreatminds3032]

We want 5150 Amp!!

[@FelipeLima-xt5qk]

❤️

[@pancaadi]

I've been upgrade this version and this is the result sound... Niceee kzbin.info/www/bejne/jYHHg6WYna9_iLM

[@langeit]

What's wrong with your voice?

[@paulneedham9885]

He is Chinese!! How do you think you sound if you were speaking his language? or English, even?

[@langeit]

I can hear a specific digital modulation in his voice so I asked. Please don't get too excited.

[@aptfx]

Whats wrong with you?

[@langeit]

@@aptfx Please specify the question.

[@cesarbermeo4605]

Where is the update?