Nux Mg 300 Recording | Recording to your DAW

[@RADERFPV]

The mg 300 really is a great all around pedal. I think the best part about recording with it is that all the processing for effects and distortion happen on the mg 300 itself, so you can keep the buffer size way down low. Love it👊👍

[@ThePedalGuy]

Totally agree!

[@RADERFPV]

@@ThePedalGuy 👍

[@LamBoyzzz]

Thank you so much, ive been looking for so long on how to this on the computer, appreciate you so much ♥️

[@ThePedalGuy]

Happy to help

[@frigotv1]

...and it WORKS :) you are amazing !!!!!!!!!!! thank you VERY MUCH !!!!!!!!!!! Thanks to you I ve found Reaper, and Im pleasently surprised by this SW and also thanks to you I can now record in Studio One 5 You are the BEST !!!

[@ThePedalGuy]

Glad to help!

[@minkorrh]

Most DAWS also allow for that latency correction, even though it's it's only milliseconds. This will allow for 'dead-on' timing. I looked this up for Reaper. EDIT: I'm having an issue with mine when I try and record. (WIN10) I could never connect to the QuickTone software unless I use the lower driver version for Win7, and regardless of which drivers I use I cannot record into a DAW with it. Every time I arm a track and hit a note, I get nothing but static. Latest firmware installed. Huge driver issues from my perspective. I ordered an actual recording interface to bypass the entire issue. Had zero issues recording, connecting and using as a soundcard with my PODHD500X. Better coded drivers one can only assume, unless it's something about my WIN10 build. i dunno.

[@ThePedalGuy]

Ok

[@jeremyacker7992]

Hi Scott. I purchased a NUX MG 300. I did the firmware update, recalibrated the expression pedal, and installed the ASIO drivers in Windows 10. I use Pro Tools to record. I’m able to record into Pro Tools through the MG300 USB port and see that the signal is getting through; however, when I disarm the track and play it back, I can’t hear what I recorded. I routed the outputs to stereo 1 and 2 in PTs IO, but no sound comes back through the MG300 Headphone output. I only hear my guitar signal plugged into the MG300s input. How can I hear the signal I recorded? I’m very confused! Thanks for any help!

[@sandrosadhukhan]

Turn off input monitoring in Pro Tools after recording the guitar track, and you can hear the track recorded when you hit play back

[@chrisdellas9185]

Bought Nux MG300 , I connected my Mg300 via usb to windows laptop and selected output as Speakers Realtek audio(laptop speakers), I see the input signal is fine but there is no output any solutions

[@ElPapu23_]

I'm having the same problem

[@EmmanuelAbellera]

Download Asio to use as the audio driver for the interface

[@aianezperez1678]

I cant hear recorded audio in my DAW, i think the problem is the usb cable, since im using a cp cable, that may be the problem. thanks god i saw this video. Keep it up sir.. thanks

[@jcalzada74]

You need a 3.0 usb cable and if you are connected to a laptop i recomend get a powered usb hub sometimes laptops draw loss of power and get the signal lost that was my case

[@ThePedalGuy]

Did it work?

[@controlshiftescape]

If you turned off the monitor on the armed track then how can you hear the output when the mg300 is not connected to any output out?

[@fainnball8694]

I am new to recording. Do you have to have the Daw before any sound comes out?

[@batphink2655]

Hi I used the competition as in a Valeton GP100 and just wondering how you get such a good rocking yet smooth overdrive? Was there a High Pass filter on the final recorded guitar? Cheers!

[@mohitrahaman]

He used the Matchless amp model with a JHS Morning Glory aka Marshall Bluesbreaker type overdrive in front. Try anything similar on your device like a Vox model with a Bluesbreaker. 90% of the gainy tone itself will be in the amp model, pick attack and stuff will be tweaked by the OD and smoothness somewhat can also be contributed by the IR

[@renthebat]

hi, i need a suggestion, should i use studio monitors or combo amp with nux mg300?

[@ThePedalGuy]

Studio monitors

[@novelistusonthewater]

Great Video as always. Thanks for sharing. **** question answered somewhere down below .... no drumming track on the audio interface. Thats pretty lame ad means I can't use any MG300 drumming tracks to build a song unless I run it through another audio interface. Not the PEDAL guys problem though ;-) ... but it means my pedal/equipment board just got bigger with the inclusion of the Rubix 22 and the RC3. Is there a way that when I record that I can record it with the MG300 drumming track ? The Drumming track signal doesn't make it over the USB connection for the audio interface but the drumming track is present on the output jack If the drumming track doesn't come with the instrument signal for recording then the only way is to feed the MG300 output to another audio interface (I got a Rubix 22) but I had hope I can avoid that. (I'm importing into REAPER)

[@mohitrahaman]

Reaper is the best DAW, just like winrar, you can evaluate indefinitely, for personal bedroom use.

[@ThePedalGuy]

Yup

[@owelguitar]

I am having a problem connecting the NUX MG-300 to my computer. The Nux Quicktone works, I can mix. But I am not hearing a monitor or output on my headset. I was the output to be on my headset. And even if I select NUX output or headset output on my computer I don't hear the sound of my guitar unless it's connected and output to an amp. When I record on Audacity, there's no sound while I play the guitar. But when I play the recorded play, I can hear the output on my headphones. There's no solution I can find on the web or KZbin or anything.

[@manoloc6068]

Hi ! Exelent tutorial man! Helps me a lot, just a doubt, with this pedal there is a way to record the beat box and the looper ? Im really struggling with that I appreciate any help.

[@olgaemeralds]

Hello, I have tried 3 different USB cables which are data cables? but the quicktone still is asking "please connect the Modeler with USB". what could be the problem? thank you

[@vigneshgopan]

I faced the similar problem... Only thing to do is to update the firmware of your mg300 and after the update, the pedal will be connected to quicktone.

[@jankowalski6338]

@@vigneshgopan you need a data cable to update firmware so that's very stupid 'solution'

[@HAILAZERATE218]

Hi! Thats great man, but do you know how to pair quicktone to reaper?

[@ThePedalGuy]

QT is not a plug-in that can be used with Reaper. It's a separate app.

[@16Keekomachine]

Hi Pedal Guy! Where did you connect your headphone on this video? Is it direct from the computer or to the MG300 itself?

[@ThePedalGuy]

Sorry for the late reply. This was the output of the mg300 plugged into my mixer which was recording the video portion of this tutorial. In other words, I was using two computers to demo this functionality

[@davidbenhamu1992]

hi bro im trying to use it and my pc recognise the guitar i can see it in reaper but im not able to hear anything what can i do? great video

[@kingrey3528]

Having same problem too man, anyone figure out the problem?

[@daryl0063]

Did you all figure it out?

[@Heisenbeef]

change the audio system back to whatever it was before you changed it to Asio, make the input the line(nux audio) and make ur output ur headphones. worked for me

[@sevlewkowicz2876]

I want to record using this pedal into Cubase, but I want to hear the sound of the track AND the guitar through my normal audio interface, not the NUX one. Is it possible to select different ASIO drivers for the output so that my inputs are NUX, and output ones are Behringer UMC

[@cristianbferreyra]

Hello I am from Argentina. I have a problem with the sound. I can see the Nux Mg300 connected to Quicktone. I did it with usb cable to computer. I play the guitar but i can't hear it on the PC speakers. Do you know what the problem could be? Is by the output of the Nux MG 300 the only posibility to hear the guitar? ?Thanks

[@ohnoitssofia6029]

Hola, tengo el mismo problema. Pudiste solucionarlo?

[@cristianbferreyra]

@@ohnoitssofia6029 hola Ana. Cómo estás? Pregunté en varios lugares, estuve probando y los conclusión es que hay que escuchar la guitarra sacando el audio por la salida de audio de la Nux, no por la Notebook. Lo probé y así funciona. Por un lado, se puede controlar los diferentes presets (los ampli, los pedales, etc desde la pedalera y ver los cambios en la compu o bien hacer los cambios desde la conpu. Es importante ver qué la notebook y la pedalera interactúan. Además, se ve que aparece conectada porque te abre la interfaz. Sinó, te dice que enchufes el cable USB. Una vez en esta situación, deberías poder conectar unos auriculares (no del celu, sino de esos más grandes) en el output de la pedalera y escuchar la guitarra por ahí. Otra opción es conectar, en lugar de unos auriculares, un cable plug o miniplug a la entrada auxiliar de un ampli, esas que algunos ampli tienen para poner pistas externas en MP3. Eso es porque vos desde la pedalera ya sacas el sonido "coloreado" y no querés que el ampli sume amplificación porque seguro estás usando uno simulado en la Nux. Según me dijeron, está la posibilidad de escuchar a la través de la PC, pero hay que configurarlo a través de un DAW (programas para grabar pistas como Reaper, Protools, etc) Fíjate en principio si logras escuchar por la salida de la Nux e ir interactuando con la Compu

[@ohnoitssofia6029]

@@cristianbferreyra Dale, muchas gracias

[@kuzwa3886]

Hi, I do all You said, and I can see my Cubase recording the sounds from NUX. The problem is, I cannot HEAR anything. I only can connect my NUX directly with my headphones, and then I can hear guitar only, but no other tracks or any sound at all from laptop. Speakers in laptop are silent?

[@ThePedalGuy]

Make sure that your computer is using your computer speakers for audio output. When you plug the MG-300 in, Windows will automatically route the ins and outs to it as the default audio device.

[@kuzwa3886]

@@ThePedalGuy Thanks for answer! Computer speakers are working with other software - spotify, web browser etc. The problem is only with DAW (Cubase, I also tried in Reaper) - after setting up NUX Asio as the driver for inputs and outputs, no sound comes out from DAW. I can see in DAW, that the sound from my guitar is going in, I can even "record" something, only there is no sound to hear it. I think DAW sends the sound to the NUX device, but from the device I can only hear my guitar, and nothing else. Weird...

[@ohnoitssofia6029]

Hi, I have the same problem. Were you able to fix it?

[@kuzwa3886]

@@ohnoitssofia6029 no, unfortunatelly no:(

[@vegabejarlucasmateus3619]

@@kuzwa3886 same situation but I was trying with fl studio 20

[@stringsandhamers]

Hello thanks fot the video, but i have this problem: i've downloaded and updated correctly the mg300 firmware, i have quick tone and installed the Windows drivers, everything looks fine (i have communication With Quicktone and in the driver icon i see my nux connected), but i cant see any of tje buffer options and from reappers it says that is a problem opening the driver, what could i do?

[@ThePedalGuy]

Two possibilities. One is that there’s a USB conflict. The other possibility is that you are using the MG300 as your native audio device.

[@ASIFHUSSAINMUZIK]

Can we use it into smartphones directly through usb ? So we can record mobile videos with processed audio with mg 300 directly.

[@ThePedalGuy]

It's not something we directly support but it should work with a camera connection kit via iOS or a USB adapter with Android.

[@jappuu]

I followed your steps but it seems like theres a chorus effect when i record even though in my nux theres no chorus. But after the recording when I playback the chorus ia no longer there, Is there a problem in my monitoring

[@marcopaulosantos]

I saw the question above but no answer yet. How it it possible to hear the other tracks (plugins, drums etc) not just the guitar ? I'm using Logic on mac OS 11. Thanks!

[@ThePedalGuy]

Not too sure how to configure on a Mac (Windows user). It sets up just like any audio IO would in Logic so it should work fine.

[@wesleygamarra2125]

Hello can you please tell me what USB specifically goes in the nux USB port? I have a white one that doesn’t work at all, thanks for the video

[@ThePedalGuy]

It needs to be a usb cable that passes data. Charging usb cables will not work

[@wesleygamarra2125]

Thank you!!!

[@earthwattjames1151]

Hi may I know why metronome no sound even is turn on setup & no sound from recorded track has save when I playback ?

[@TECHIERSHUB]

How is the audio quality and latency and hiss noises when using the Nux mg300 as Audio Interface compared to external Audio interfaces like the Forcus scarlett or behringer ????

[@Mr3psylon]

Hi. Where do you plug the earphones? On the pc or on the mg300?

[@ThePedalGuy]

In this setup you would use the headphone out on the mg300

[@VictorBrichaut]

Is there a way to also record the dry signal at the same time on another track?

[@ThePedalGuy]

Not that I'm aware of. There's a Dry Out option though but not for multiple tracks.

[@VictorBrichaut]

@@ThePedalGuy Thanks for your answer. For those interested: the Valeton GP100 does allow dual recording. However, as far as I can tell, it doesn't let you reamp...

[@ChetanKumar-wl9in]

Can this pedal record two input sources directly via AuxIn and another 3/4 input channel? I connected my Electret mic to AUX-In channel but no sound is recorded.

[@ThePedalGuy]

Not that I'm aware of.

[@neastguy]

I just got the mg 400 I have it hooked up via usb .. using reaper.. I get a signal.. but I cant hear it through my monitors .. only way I can is if i switch to my audio interface for playback.. can I use the mg 400 asio and also hear via my monitosr.. or do I need to plug the outputs of the mg into my audio interface to do that? thanks

[@ThePedalGuy]

I will need to do a video to cover that but yes you can use the MG400 for recording and playback.

[@HurveyJones]

@@ThePedalGuy I just got my mg 400 last week. I followed the same process as the 300, except I downloaded everything for the 400. Used Reaper, and had no problem at all. A straight shot! I am new to guitars because I play keyboards, but this machine here?? I'll never give up because it makes my creative juices flow!!

[@jeffhenley3649]

Just wanted to know where you hooked directly into your computer I mean was the sound coming from you pc speakers or an amp if so how exactly to I hook mine up to my pc like which USB port or does it matter...and thanks for the video

[@ThePedalGuy]

Hi. In this case, I recorded straight into my laptop via the MG-300 USB. For the sake of capturing it for the video, I routed the audio output of the MG-300 to my video capture setup but that didn't change the sound at all.

[@jcalzada74]

Funny thing that you say to keep the record level 0db but in my case i set it to 12db in order to have a loud master

[@ThePedalGuy]

Just remember you can always record at a normal level and increase the volume in the mix. It’s difficult to go the other way. Save your dynamics 😉

[@jcalzada74]

@@ThePedalGuy thank you

[@jeffu190]

I can not afford an amp, so can i use this as an audio interface and then have a output speaker/ headphones to listen to the sound? Thanks!

[@ThePedalGuy]

Yes, that will work fine.

[@aditya.pratama]

Does this pedal support for bass, or only mg-30 that has bass support? And which one you recommend more valeton gp-100 or nux mg-300? Thanks

[@ThePedalGuy]

Currently there are no bass amps in the MG-300. I know it's been requested but no updates yet.

[@guitaristmalaysiasemuapower]

hi, can nux mg300 record directly through usb otg to phone without the hassle to setup through computer

[@billyanggranesta8722]

can i use mg 300 as a soundcard and using vst like neural vst or bias fx?

[@ThePedalGuy]

Yes the MG300 can be used as an audio IO.

[@billyanggranesta8722]

@@ThePedalGuy how to do it? I mean how to disable nux as multi effect and use it as soundcard

[@SebaLeozMdq6]

@@billyanggranesta8722 with dry out optiom

[@poseidongaming5521]

Hi Sir 👋🏻 . Can I use Nux Mg 300 as an Audio Interface . And does it work with Daws like FL Studio or Ableton Live ?? . Thanks for providing such precised reviews and walk-throughs 😇

[@ThePedalGuy]

Yes you can! It'll work with any DAW that uses ASIO

[@poseidongaming5521]

@@ThePedalGuy Woah !! Never expected will get a reply this soon . Thanks a lot Sir 😇. Keep the Good reviews coming. Thanks a lot again!!.

[@ThePedalGuy]

@@poseidongaming5521 you got it.

[@mauricioluftman6511]

good video. Can this work with the Nux mg30? and for Windows?

[@ThePedalGuy]

Yes of course

[@Cloud_Strife_19]

Could i use the Nux MG300 as audio interface and record my vocals? Just for home recording / fun

[@ThePedalGuy]

Yes here’s a demo kzbin.info/www/bejne/o3yVfox8ZbmGfLc

[@vkmoureeshmukunth9628]

how good is it as an audio interface , is there noticable lag

[@ThePedalGuy]

It works just fine.

[@vegabejarlucasmateus3619]

Sir. pedal guy I used mg 300 in fl studio 20, everything works but the problem is; after recording i cannot hear what i recorded apparently the sound visuals are going but nothing to headphones or speakers

[@ThePedalGuy]

Is there a waveform on the recorded track?

[@theo-xl3to]

@@ThePedalGuy that happened to me too, i can see the signal on the in-put, but there's no waveform on the recorded track, neither is the monitoring sending any outputs

[@gozerol1543]

İ cant get sound from the computer

[@jeypz9541]

Hi, do I need to download asio driver if I'll record directly to my phone?

[@ThePedalGuy]

No ASIO driver needed for that. However, I haven't gotten it to work properly with an iPhone so just be aware.

[@jankowalski6338]

Can it record dry signal? What is studio mode?

[@ThePedalGuy]

Yes you can record a dry unprocessed signal. Studio mode is the correct mode to use for this when it’s hooked up to the computer.

[@jankowalski6338]

@@ThePedalGuy it's sounded the same after I switched to it(still effects applied)

[@victoronline5840]

Hi! Thanks for the video! When I use the MG300 as my audio interface, I find that the recording volume is very low. I would play the tracks on my DAW and record my guitar and the volume is fine but when I play back what I just recorded, the volume is way down. I made sure to set the recording and playback levels at 0. I also tried plugin in the pedal into my M-Audio audio interface but the sound quality is atrocious. All I want to do is hear what I'm recording, at the right level and in real time. I already have guitar rig and just bought this pedal to lower my computer processing power load. Any ideas?

[@gusmanlebah2653]

Hi. I also had the same experience, but i use MG30. I didny hear any playback sound.

[@Peterplayingguitar]

I'm having the same problem with Audacity :(

[@jacobjulian2305]

So no answer for your problem... I've got the same problem here :(

[@alanalfonso6620]

@@jacobjulian2305 same problem:( i'm dissapointed fr

[@farrukha.4571]

Спасибо большое из России)) Thank You!!! 👍

[@ThePedalGuy]

Glad to help

[@koni_island]

Hey. Im trying to record my loop - but that signal doesnt output through the USB?

[@ThePedalGuy]

Hmm....it should. You might want to double check with the MG-300 FB Groups for additional help.

[@koni_island]

@@ThePedalGuy thank you. i will

[@analauragonzalezaguilar1196]

Where can I download the mix ASIO driver?

[@ThePedalGuy]

The NUX landing page for the MG300

[@TheDamnedScientist]

How to get the output through my headphones connected to PC instead of the mg300 out jack?

[@ThePedalGuy]

That’s a little tricky. It would be easier if you used the mg300 as an audio io

[@TheDamnedScientist]

​@@ThePedalGuythe thing is I ain't got an amp or speakers and I kind of wanted to practice in silence as well. I tried setting the audio device to windows sound one in reaper but it sounded horrible tbh 😂.

[@ghostxmetal]

you actually can, but it will affect the sound levels, i tried this with my mg30 as input device and my scarlet solo as output device. had to tinker around to get the output, i did get that, but the quality, tooo much distortion even with noise gate, not sure why

[@nedstar7378]

I try the newest version of Asio from NUX but after this driver my quicktone program can not run any more. My laptop has windows 10 64 bit with the latest update. How can I get to work???

[@ThePedalGuy]

Make sure you’re using the latest quicktone version. It needs to match with the update.

[@nedstar7378]

@@ThePedalGuy I use the newest Quicktone and firmware and asio with usb data usb cable.

[@nedstar7378]

@@ThePedalGuy I downloaded the Windows 7 version of the Asio driver and now it works perfect. It is strange why the Windows 10 version not works on my Windows 10 laptop. However it works now perfect. But how I can record backtrack, drums and guitar at the same time in Reaper.

[@darrenmitchell1744]

Can you record direct thro an interface rather than downloading the 3 mg 300 softwares ?

[@ThePedalGuy]

If you’re on windows you need the ASIO driver but I believe you can use it as an audio io without the quicktone app

[@darrenmitchell1744]

@@ThePedalGuy Cool l try it out tommora

[@ridzuanmohamad4491]

How to make sure the strong signal is sent to DAW? ..i use reaper and mg300 but the signal captured is so thin.

[@ThePedalGuy]

Have you adjusted the record level from the quicktone app?

[@ridzuanmohamad4491]

@@ThePedalGuy ...thank you for the help. Now i can get the signal between -22 to -12 db. I'm still new and Nux MG300 is my first pedal ..a lot to learn ..tq

[@bradcad123]

the unit seems to have to become the sound card, but i only want it to be digital input thru usb

[@carlos-lm3hl]

Thank you!

[@ThePedalGuy]

You're welcome!

[@MickRM]

Thaaaaaaanks! I love u so much

[@ronaldvanjelgerhuis5949]

Will the MG300 also digitize the signal from the aux input through USB? E.g. to jam with a backing track and record the combined signal directly in my DAW.

[@ThePedalGuy]

I haven't actually tried that yet.

[@ronaldvanjelgerhuis5949]

@@ThePedalGuy It would be a solution for my DAW latency

[@brakpseudonimu236]

I've just tried it, and luckily (for me) it only records guitar, no aux, no drums/metronome. Is there a problem mixing the backing track and guitar in DAW afterwards? EDIT: Just to be specific (I don't think it makes a difference) I haven't used AUX input, instead used MG300 via USB as PC's audio output (to hear the PC sounds in headphones connected to mg300 directly)

[@ronaldvanjelgerhuis5949]

@@brakpseudonimu236 it is not a problem, it would only reduce some steps in my recording process. Thanks for the help!

[@electrochainik]

@@brakpseudonimu236 Hi, I know it's a year ago, but still - If I'd want to hear the sound through my speakers I'd have to plug them into my MG300 and assign it as the main audio device? And after I'm done playing I'd have to plug them again into my PC? Not possible to assign the speakers or headphones which are plugged into PC and use them that way without plugging them into MG300 ?

[@alainvb8786]

Bonjour Je peux enregistré ma voix dans l ordinateur si je rentre par l entrée guitare du mg 300 ? Merci

[@ThePedalGuy]

If you use a mix with an impedance converter, then yes. This will help kzbin.info/www/bejne/o3yVfox8ZbmGfLc

[@alainvb8786]

Ah ok merci

[@vinushka7036]

Can you record with it through your phone? (Especially on android)

[@marykth]

Hi, can i record it with an ipad? Is it possible?

[@ThePedalGuy]

Rumor has it that you can with a camera connection kit but I’ve never seen it work

[@rainsinspring5378]

I have an issue wirh reamping. anything I need to get notice to fix it? thanks a lot!

[@ThePedalGuy]

Did you watch my vid on reamping with the mg300?

[@rainsinspring5378]

@@ThePedalGuy hi, I already did. But I cannot find the solution to it. I record with the dry signal, and then switch to reamp mode in the Quicktone. But it does not work eventually. It does not record anything with reamp mode. :(

[@ThePedalGuy]

@@rainsinspring5378 which daw are you using?

[@rainsinspring5378]

@@ThePedalGuy Im using free software Audacity.

[@ThePedalGuy]

@@rainsinspring5378 not sure audacity can do that as it requires routing inside the daw to send the signal back to the mg300.

[@marciongibson]

Hello. Is it possible to use guitar rig 7 live with the NUX MG 300 or i need to buy another audio interface ?

[@jankowalski6338]

did you find an answer?

[@MarianoResi]

Hi, I am getting a low record input with the DAW (reaper) so I have to turn the volume up so much to get a decent record input level. Do you posible know why could this happen? Thanks .-

[@ThePedalGuy]

Have you looked at the record levels via quicktone.

[@MarianoResi]

Thanks for the answer. Yes I have... all at 0 db and so I've modified them to increase de record level but still no so much difference... I've got something in mind to solve it. I'll share it as soon I get to do it

[@guga7]

@@MarianoResi any idea? I have the same problem :( recording level is too low...

[@MarianoResi]

@@guga7 partially solved increasing the level knob of the pedalboard when I m recording and decreasing the level of all the others instruments in the daw. but still the recording level is low... I'm keep working on it.

[@guga7]

@@MarianoResi yes, boosting the "master level" and the "recording level" seems to be the only way to have decent volume in the DAW...

[@weareelectricgi]

please help! there's no sounds on ASIO but WaveOut has

[@dazedhotdog3459]

does the mg 200 work the same way?

[@ThePedalGuy]

Not that I'm aware of.

[@martindamasin8669]

Can the Mg300 record direct to a phone?

[@ThePedalGuy]

Not sure. Will need to check and see. Theoretically with the Camera Connection adapter, this should be possible.

[@kbomb5979]

Do u have to use reaper

[@ThePedalGuy]

No you can use any daw you like

[@IbizaRose]

Hi, thank you. I did everything exactly like you show. I have Windows 10. Asio driver downloaded and I can see the input signal and I can record, BUT I have NO SOUND coming out of the reaper. I know that your sound comes from the headphone output of the Nux in this case. But I should be able to hear it directly from the Reaper. Please help, I woul appreciate it very much. Thank you.

[@ThePedalGuy]

I'll see what I can do to create a follow up video to explain this a little more clearly.

[@Jael.Buffa90]

Hi! Do you have any solution for this? I have the same problem 😔 greetings from Argentina! 🇦🇷

[@bradcad123]

@@ThePedalGuy yes please

[@dairyQuotes13]

I have the same problem. do you have any solution ?

[@sansubr]

In your ASIO driver settings on Windows, you will need to select the output device.

[@sameerahmed4410]

when i'm recording, the sound clips/breaks a lot in the wav file. How do I fix it?

[@ThePedalGuy]

First, make adjustments to the buffer size on your DAW. Second, also make sure that you're not plugged into a hub. The MG300 doesn't like that.

[@sameerahmed4410]

@@ThePedalGuy hub as in no electrical supply, right?

[@ThePedalGuy]

@@sameerahmed4410 I mean don’t use a usb hub with the mg300. Plug directly into your cpu USB port

[@sameerahmed4410]

@@ThePedalGuy oh okay okay, thank you so much!✌🏼

[@emanlai293]

Is anyone getting poor quality ? Does the usb matter? How can I improve the quality?

[@ThePedalGuy]

You need to be more specific. The audio quality is fine with the mg-300. But it depends on the buffer setting in your daw to ensure the best audio performance

[@toomanynamesmusic]

I cannot hear my guitar when I use Nux Asio :(

[@hifijohn]

just got mine a few days ago.

[@ThePedalGuy]

Cool. Enjoy it

[@hifijohn]

@@ThePedalGuy I will ,have been using a DigiTech pr70, its not bad but very badly laid out no knobs just buttons and layers of menus and sub-menus and a bunch of LEDs that you're supposed to interpret what they mean, also the plastic pedal button are very cheap and fail very fast, the nux is much better laid out with a nice easy to understand display and the metal pedal buttons that look like they will last longer.

[@zachjennings4227]

I'm having trouble getting this to work on my Mac. Are there any specific videos or resources you could point me to to show me how I can get audio to come out? Do I need an audio interface or just QuickTone and Reaper?

[@b.y.1957]

It's been 10 months, have you found the answer? I've got same issue.

[@zachjennings4227]

@@b.y.1957 Yes. I figured out in a FB group that my USB cable was only a charging cable and not one capable of data transfer. When I bought a new cable it worked just fine and now I used my MG300 all the time!

[@b.y.1957]

@@zachjennings4227 thank you so much it’s worked

[@HuongPh206]

I want to record but what if i don't have Computer :(

[@ThePedalGuy]

You might want to look into a hard disk recorder or perhaps iOS

[@miyavizim]

Does anyone know how to use audacity to record the tone from the Amp, merely using MG 300 as an audio interface for recording. Typically this has no problem using audacity and and Quicktone editor. However, this round I wish to use only the THR10's tone (amazing) and I do not want Nux MG 300 tone on it, while retaining capability of amp/Nux to PC recording capabilities. So far I have tinkered with Mode (Combo Rear, Combo Front, Studio etc), Settings (Dry out/reamp) to no avail. What results is just a "flat" tone where all amps/pedals in Quicktone is bypassed, and none of the distorted tone out of the THR10. Does anyone know how to get the tone from THR10 into audacity?

[@ThePedalGuy]

I’m sorry but I don’t understand the question as you have asked the same question on several of my vids. You want to record a flat, unprocessed tone into Audacity from the MG300?

[@miyavizim]

@@ThePedalGuy Thanks for the reply. I want to record what's purely out from my THR10 into the computer. But it seems that passing through NUX MG 300 (I've turned off all amp/pedal into bypass in Quicktone editor) and into PC/Audacity, what results is a flat tone. The MG300 needs to be here as I need it to be my audio interface.

[@ThePedalGuy]

@@miyavizim it’s a rather unusual situation. The MG300 should be in Studio Direct mode. Turn off all signal blocks on the MG300 and that should do it.

[@miyavizim]

@@ThePedalGuy How do you switch to studio direct mode? And how do you turn of signal blocks? Is this somethin we can do on quicktone? Many thanks!!

[@SebaLeozMdq6]

Hi sir. Can i use this pedalboard as a interface and the helix native program on the PC? I tried but it Sounded rare. Maybe i missed configurate something.

[@ThePedalGuy]

Hi. Not sure that would work well. I haven’t used the mg300 as an interface for plugins like helix or amplitude

[@SebaLeozMdq6]

@@ThePedalGuy maybe i have to use the dry out setting

[@ThePedalGuy]

@@SebaLeozMdq6 yes you want the signal to be unprocessed going into the helix

[@jhonalvaroh]

para cambiar el formato de la grabacion , para editar el video se puede grabar en mp3?

[@ThePedalGuy]

English please?

[@mir9302]

Has anyone managed to get the MG-300 to work with Bandlab?

[@viincee41]

sir, can i ask what is your overall preferred budget effects between mooer ge150, zoom g1x four and nux mg300? .. thanks in advance

[@ThePedalGuy]

Hi. I haven’t used the Zoom pedal, but the mg300 has been a big hit so far. A lot of happy customers

[@Lenard.A]

if i set up it keeps saying file vendor.cer not found

[@ThePedalGuy]

Sorry I have no idea how to advise here

[@AmritP]

hiya, would it be best to use 'studio direct' mode in this case? or if i still have my combo amp connected whilst recording, should i stay in combo front? thanks

[@ThePedalGuy]

If you’re using your amp you would want to stay in combo front mode or combo rear if you’re using the fx return

[@zapphoddbubbahbrox5681]

Note on downloading NUX software/drivers... I'd not use my DAW PC for any online banking. Just saying....

[@ThePedalGuy]

🤷‍♂️ not getting your point

[@zapphoddbubbahbrox5681]

@@ThePedalGuy - it is a security thing. Not pointing to any one vendor.

[@ThePedalGuy]

@@zapphoddbubbahbrox5681 Ok. That's kind of common sense but I get your point.

[@brakpseudonimu236]

@@zapphoddbubbahbrox5681 Hey, could you please elaborate? Are there confirmed cases of their software being trojans or just general caution because of country of origin or something else?

[@lilwayne1994]

Is it good first mfx for beginners and do you think it is good in terms of live?Like switches of presets etc btw I have other pedals...

[@ThePedalGuy]

It’s an excellent choice for first timers. I wish they had something like this when I was a first timer 😉

[@Dave_Vee]

You really shouldn't have anything like the latency delay at 5.31 in the video, or be trying to work around it by disarming tracks etc. I have an MG 300 and there is zero latency when connected to DAW. There is no need for the MG300's audio out to be connected to the PC as audio should be coming through the USB out. Perhaps that's what's causing the latency issue here? I would dump it if the latency was that bad!

[@ThePedalGuy]

Appreciate the feedback, but I think you're missing the point. Every computer is different and will respond differently to ASIO and latency. I have done this for over 25 years and it's never the same every time. The purpose of what I showed was to avoid the problem all together by not monitoring with latency. All of the audio you heard was coming via USB mixed in with my VO.

[@zenica12]

its a shame reaper cannot record looper and drums

[@ThePedalGuy]

I believe that you can with Loopback. I’ll need to check

[@zenica12]

@@ThePedalGuy Well, that would be great. I get crazy guitar feedback when loopback option is clicked and ran through reaper.

[@BobGreenOnline]

Great info but background music is irritating and unecessary.

[@ThePedalGuy]

Thanks for the feedback

[@rgerwin.3378]

Too Complicated. Too many downloading this update and that update. This is what I have done with my old, second hand Digitech Modelling Guitar Processer. I Plug my guitar in the input jack on the back of the digitech, then plug in a short chord running from my digitech into my cheap audio interface that is hooked into my computer Thats it! I recorded some fantastic music doing this through my DAW in Bandlab. It sounds fantastic.

[@sirjford8480]

hi sir, I have a problem with the record. There was static sound whenever I connect the mg-300 to my pc or even in my laptop.

[@ThePedalGuy]

Possibly a grounding issue

[@sirjford8480]

how can I solve that?

[@notweltraz279]

do i download the asio driver on the asio website? or is there any specific for Nux's asio driver?

[@ThePedalGuy]

Yes if you’re on windows