Fix ps4 pro power supply connector ripped off Repair (EASY METHOD)

[@raziel3358]

Nicely done sir, if I do have to run a trace..... what is the good recommended size of wire?

[@stillamitchinmybook6320]

Is there a special kind of wire to use?? The amazon has some wire that is tin that is recommended bought together but im not sure if I need special wire or special gage??

[@stillamitchinmybook6320]

Also im buying the soldering tool you recommended in the description but the wire you have in there is a big ass role lol I just want to buy a little $10 roll but need to know what exactly to buy? Tin? Silver?? Some kind of special gage of wire???

[@alhakamaljanabi6270]

What is the purpose of this 5v connector? Does the ps4 works without it if the 12v connector is plugged?

[@pimpedoutstereos9747]

I’ll give this a try tomorrow. My connector broke off while I was taking my ps4 pro apart from replace the thermal plate and clean out the heat sink. Was an easy process for a first shot but that connector broke off as well as the pads off the motherboard. I hope I can fix it. I’ve had a reasonable amount of soldering experience

[@sippingGerber]

I just had this same issue right now. I’m fucking pissed. I have no soldering experience and I just pulled off the entire cable like in this video. But I have 4/4 of the little silver teeth are on the board still.

[@DeATHuMmEr]

@@sippingGerber did u fix it it happend to me now pls reply edit-dont worry it will be fixed i too mine to repair shop and it got repaired easily

[@ThatBritalian]

Yep. Just happened to me as well. It's my second time refurbishing a ps4 pro and I accidentally pulled too hard and ripped all the solder off.

[@Dabbin_ON_Em_90s]

Please answer, What Guage and type of copper wire do I need for the Traces?? Mine were completely ripped off and what temp for Solder Iron in farenheit please

[@stillamitchinmybook6320]

Yes I need to know this also??

[@stillamitchinmybook6320]

Its been a years did you ever find out??

[@Dabbin_ON_Em_90s]

Notta bro

[@fuxplayz5240]

I just done this to my ps4 while trying to clean it ended up pulling it a lil to much and pulled it off exactly this like this except I still have silver bits on the bottom one,the one above and the very top one but I have a bit of the green stuff pulled off under bottom like in video but it goes all the way to the edge where the metal casing is and a little bit pulled off basically above the same as top connector, how easy would this be? Haven’t soldered in like 7 years so idk😅

[@randybobandy1309]

Where did you find a replacement for the 4pin cord all the ones on Amazon are too short

[@temwanisingini2967]

Did you manage to find

[@stillamitchinmybook6320]

I have flux 135!? Rosin paste flux! Is that going to work!?

[@AllFl3X]

How much you charge to repair this?

[@LokiTheReaper888]

There’s one article online that gives you improper directions and that’s what happened to me being my first time in my ps4 console devastated but luckily there’s some for cheap near me, gonna try to fix it with this method

[@nadermohammad1978]

i didnt break the connector but i accidentally pulled a cable out from the power supply cable and idk what to do

[@AngaarUriakhil]

I think the brush you're talking about is a fibreglass pen. I've tried it also but it's just way easier to scrape with a scalpel or a flathead screwdriver to expose copper.

[@eduardoortiz658]

Can you just use super glue instead of all the extra stuff?

[@stillamitchinmybook6320]

Yah I was wondering the same. Wish he could read the comments and do an update video of questions asked

[@kevlyoparher428]

What happens if there are no pads left like at all

[@lennyshoe]

FIXED! Nice Video, I followed this tutorial which helped so much. I also had some experience with soldering from a highschool elective which came in clutch haha.

[@stillamitchinmybook6320]

Dam it must be nice! Im having hell! I bought the solder that he had listed but the stuff that came in the mail is super super thin compared to what he is using in the video… any help?? I would appreciate it!!

[@karensbadapples8337]

The connector piece to the motherboard got stuck, won’t barely budge. what happens when the part becomes too hard to remove? What should I do, When trying not to break it off completely?😬

[@stillamitchinmybook6320]

You said just grab some regular solder and you show kester 44 rosin core and I type that in and there is a bunch of different kinds!!! You didn’t show us!! It’s important to know what exactly I need to get.. I can’t guess and I don’t know which is supposed to be regular solder!?

[@Effortastic]

Mine isn’t completely ripped off, but one side has been ripped a little bit.

[@rozliaty_cukor7793]

Did you fix this?? I have the same

[@Dabbin_ON_Em_90s]

If you come across one that you need to do a Pinout, please publish a video on how to do it like this one. Thank you friend

[@hadeZgaming69420]

Appreciate this, had a friend helping me and he just straight ripped it out lol.

[@Simeon1111]

Did you fix it?

[@stillamitchinmybook6320]

Dam your soldering tool is $109.. wondering if it would be cheaper just to send it to you??

[@FA18Hornetchannel]

I just touched it and it came off

[@Habel420atgml]

Just the video I needed

[@juliovaca9258]

I have the same problem😭

[@stillamitchinmybook6320]

He doesn’t show us the temps to use on the gun also I bought the solder he had in the description with his link to Amazon and the stuff I got is WAY WAY THINNER the the one he is using in this video.. this project is breaking me down man.. I’ve bought so much stuff and now I noticed this!! 😩😩😩😩 ive bought thermal paste ive bought soldering iron I’ve bought solder that apparently isn’t the one he is using in this video! I’ve bought the tweezers he is using I’ve bought the electromagnetic statice brushes ive bought the 8341 no clean flux paste I’ve bought the soldering iron tip set! Cuz the one it comes with is like way too blunt! I’ve bought the micro screw driver set! And also I’ve noticed that I think I’ve scratched the mother board too deep! 😩😩😩 dam it all to hell!!! Im easily $150 into this fix job and now I guess I have to but some more solder shown in video but not listed in description!?

[@daautotuneguy4729]

Skuuuwoooo

[@Dabbin_ON_Em_90s]

Yooo