Fix PS5 Turns On Then Off (Blue Light Of Death Repair)

[@mm0077]

I can see in the video the yellow jumper is connected to pin 1 and 2. For the CH341 board to work move the yellow jumper to the clearly marked number, pin 2 and 3 so that pin 1 is not connected. This is on the side where wires are connected to TX RX and Ground on the CH341 board via pins and not the side where you soldered the 3 wires. Then serial port will be recognised and it will be able to read. Hope this help.

[@robertoliver9297]

If I were to have a PS5 that's disassembled, could you reassemble it?, if yes please let kno

[@ahmedcatic6928]

ps5 had a problem. with bootloop after a while it turns on, after reballing the ssd controller and the secondary ram, it no longer turns on at all, it has the same problem as that ps, all the settings are correct, the ps should work but it doesn't. Do you have any advice on what could be

[@phynx-victumterra652]

Nice fix

[@_mylastname]

This was awesome! Great info!

[@ConsoleTherapy]

Great video Dave

[@me_bee_ste_1355]

Well done man! 👌

[@consolenichecsn6930]

I Downloaded the CST from the link, how am i to lunch it ?

[@richardwilliams1664]

That's good information thks bro 👍