Fix, Razor scooter clicks but doesn't move part 1

[@cantgetright_24_7]

Finally a video that'll just tell me how to get it working without telling me to buy all these parts and do all this testing. Exactly what I was looking for! Thank you!

[@toppervikingo]

100% right. I love when people take there time to explain what they think, according to many years experience and skills, how to fix a problem. Yes let us get more like that. George C videos are great:-) Every boddy can buy a new one - but that is not fun. Thank you George C:-)

[@sohypnodiq]

Thank you so much for sharing this helpful vid. My neighbor put a razor moped to scrap pile and I decided to attempt to salvage it. I bridged the relay as you demonstrated and wowla

[@brettthompson7787]

Awesome!!! Thanks for your help! My sons had the same issue and I Soldered the same wires and works as good as new. Made me a superdad!

[@Aramaidis-xx8bg]

Thank u sir I have a razor gokart and been having hell trying to get it running been dealing with that same clicking

[@mustaphaattebaa6714]

Hi,thank you very much with your video i repair my bicycle Razor E100.good job

[@every1likesr20mike]

Nothing was clicking on mine followed you step and jumped that first 2 left poles and it's working 😘

[@bikerboysrus1]

the relays went bad, you can remove them and put new ones in. bypassing them will burn the battery and motor up quick

[@thewoodbooger583]

Thank you. Worked like a charm!

[@MadCrafted]

E150 model most likely I have the same one.

[@ThePiemasteification]

Thanks for the video! My E100 board looks nothing like that though :/

[@jeremyrojas8942]

When your at a stand still & twist the throttle and hear a click its supposed to do that, no ride the scooter give a couple push steps and twist the throttle it will engage the motor!

[@georgec7798]

Yes normally when the scooter is working but mine was not working no matter how fast I pushed the scooter

[@rollyguiling858]

I bought a new controller but the motor still not working, I test the cable going to motor and it is zero reading, battery is fully charged 25.6V, there's click when I turn on the throttle but no power going to motor, I also checked the brake and it's fine, I already feed up, why there's no power going to motor?

[@georgec7798]

Hi, you probably have to kick-start it or you can jump the relay like in the video. In other words, you have to kick-start it like a skateboard and then turn the throttle as it's moving

[@NCXitlali]

​@@georgec7798 I heard about that. I actually replaced the controller with a new one and it still gave me that clicking noise. I got fed up lol

[@karlschwab6437]

Must be kick-started!

[@angelgarcias7328]

My do saint thing maby Thad box no good i put bottom i can h the click don't do nothing i put the battery charger got for smoll battery put cable the motor it work motor it good don't stared put cable stared thank

[@bikerboysrus1]

this is not the safe way, this is the best way to teach someone how to start a fire. most people don't understand what gauge wire to use. bypassing the relay will and is giving more amperage to the motor and straining the batteries, causing them both to fail quickly if the wire doesn't melt itself thru the plastic. the SAFE ways are to either by the 10$ speed controller new or desolder the relays and put new ones in. they cost 5$ if you use the pins this guy shows you to solder a wire in and bypass them, your soldering the wrong pins and also taking the long way around a simple fix. so much fail in one video but at least you were trying to help people

[@JonahNAloha]

All I did was over volt the system, try a 36v battery.

[@calchav3940]

Just buy a new relay switch

[@TracyWolzfelt-pn8wg]

Just got this 🛴 4 months ago