Re-uploaded with the sound fixed (hopefully). As a correction to what I said in the video - @TorontoFPV just mentioned there is a 20x20 mounting in the top plate hidden in the design, which makes this build EVEN easier... so that 20x20 3D printed adapter and additional screws shouldn't be necessary.
@TorontoFPV4 ай бұрын
Yes the audio is much better in this one. I was going to say something but I didn't want to hurt your feelings and all you have to do is pin my comment and everyone will see that or you can pin your own whatever you wish. 😜
@GarethDix4 ай бұрын
Yeah no idea what happened with the upload and I had 5 days to check it before it went live 🤦🏻♂️
@elxero2189Ай бұрын
Thanks for this
@GarethDixАй бұрын
Glad it was helpful!
@GR8SCOTT4 ай бұрын
Thanks for sharing! Discus is amazing!
@GarethDix4 ай бұрын
It really is! I’m glad I did it an can’t wait to see how much I can push it!
@TorontoFPV4 ай бұрын
@@GarethDix lmao I now expect your finest edit to this kzbin.info/www/bejne/rHTElZZ4h55opbc
@Kevin.L_4 ай бұрын
I bought 2 Crux35s and we've broken both frames in 50 flights. Definitely going to order some Discus frames. Good to see you so satisfied with the build. It's a great little quad with a fragile frame.
@GarethDix4 ай бұрын
That’s the thing about the crux35, everytime I crashed I panicked it had broken… after over a month of crashing the discus frame I’m pretty confident that it’s not going to break anytime soon! Let me know how you get on with it
@Kevin.L_4 ай бұрын
@@GarethDix I see you used the 3mm bottom plate. I was thinking of going thicker. Do you think you would go with the 3mm again? I've still got a few Crux frames to break but I plan on ordering Discus frames soon.
@GarethDix4 ай бұрын
I took the 3mm as it's the recommended size from Toronto FPV (as it saves weight). Given the weight of the quad it probably doesn't need more than 3mm... and it flies very much like a CRUX35. but there is part of me that wants to see what the 4mm is like! I think if you fly bandos it might be worth going thicker, but the 3mm seems to be holding up really well so far...
@Kevin.L_4 ай бұрын
@@GarethDix Thanks. I broke the Crux so quickly I'm thinking 4mm may be worth the penalty. I'm still analog so I think I can tolerate another 8g or whatever it is.
@GarethDix4 ай бұрын
@@Kevin.L_ if you're flying analog you have loads of weight to play around with, so 4mm and together with the shorter standoffs it would be like a mini tank
@TorontoFPV4 ай бұрын
Thanks buddy, glad your enjoying it! There is a 20 x 20 mount on the top plate hidden in the inner holes So you can mount the vista to it! If you go naked you can go from 25mm standoffs to 18 :) Also if you ever want to try something different build one as a pusher and toilet tanked on top. I'd say do that to your baby hawk and you'll be blown away. I've done 2 now and it's a whole different flying experience plus O3 with no props! See you around!
@GarethDix4 ай бұрын
I'm pretty sure I looked at that top plate when I was trying to figure out how to mount it and thought... nah it's not quite lined up... and now I'm looking at it with the vista attached... it lines up perfectly haha!
@TorontoFPV4 ай бұрын
@@GarethDix lol Yes it does I designed a 20 x 20 in there for vtx. With O3 or vista you can set it up int a way that if you had a spare ready with everything but the unit you can make a quick swap and keep going but since the bumpers it's been ultra solid. If you run a naked Gopro I'll send you my discus designed one It's 36grams :)
@DronePH-20243 ай бұрын
GREAT BUILD BROTHER HAPPY FLYING👍👍👍
@GarethDix3 ай бұрын
Thank you! 🙏🏻🙏🏻
@Ps5_ggamer4 ай бұрын
Love my crux35
@GarethDix4 ай бұрын
It’s sooooooo good… I can’t believe it took me so long to try one out!
@Ps5_ggamer3 ай бұрын
@@GarethDix everyone says the frame is weak, I’ve crashed it a few times and still solid 🤷🏻♂️
@GarethDix3 ай бұрын
@@Ps5_ggamer I babied my crux35 because I didn’t want the arm to snap, I’m considering transferring it back into the frame and flying it like I’ve been flying the discus just to see how long it would last
@Ps5_ggamer3 ай бұрын
@@GarethDix honestly mate I’ve crashed a fair few times now and it’s still solid, currently waiting on a new motor as it slid off the bin on takeoff and snapped off a motor shaft.. airframe still good
@GarethDix3 ай бұрын
@Ps5_ggamer I’ve crashed really badly with other quads at speed and not had a scratch then I drop a quad as I’m getting it off my bag and break a motor! It’s always the way 😂
@josiahmos2172 ай бұрын
I think you will love the Helios 3.5 inch DJI O3 drone by Recursion Labs.
@GarethDix2 ай бұрын
I’ll take a look, I know recursion labs but didn’t know he had a quad
@RCAdventuresAmsterdam16 күн бұрын
Great vido ✌️ Which goggles do you recomend for the Runcam Link?
@GarethDix16 күн бұрын
It depends on what else you want to fly. If you want to fly tinywhoops/analog as well then the V2 goggles. If you want to potentially use the O3 (maybe the O4 when it arrives) then the goggles 2 or integra. I’d personally go for the goggles 2 as they’re the most portable but I travel to other countries and hike with my gear
@RCAdventuresAmsterdam16 күн бұрын
@@GarethDix thank you so much for the response and advice 🙏
@SandroChapmes4 ай бұрын
The Crux35 is also my favourite sub250g freestyle bind and fly. I have broken 2 arms so far. I bought the grinderino frame and when I brake something the next time, I switch all parts to the grinderino. It's heavier but very durable, I'm wondering how it will perform or if it even works! I see you did a grinderino build yourself, are you happy with it? Grüessli us Lozärn
@GarethDix4 ай бұрын
I do love the Grinderino it not only looks amazing but it’s soooo versatile you can pretty much fit anything in it. That said I hope you have one of the newer frames with arms that has the 9x9 and 12x12 mounting for the motors on the arms or the 1404 motors from the Crux35 won’t fit. But if not let me know I have some spare arms. It would be interesting to see how the crux35 internals work with the Grinderino frame as it’s much heavier so it may fly very differently… but if you do it an upload a video let me know!
@SandroChapmes4 ай бұрын
@@GarethDix Thanks for your answer, yeah I got an updated Frame, so it would be possible I guess. Okay I will do that! Keep up your good work man, I enjoy your Videos!
@diggsit692 ай бұрын
Are the Arm guards in this video called Arm Booties? For the Discus frame, cause in the 3D Description they look like they are bigger an also cover the motors? Am looking for just Arm bumpers that just pop on? 🙏
@GarethDix2 ай бұрын
These are the booties… they go between the motor and the frame and are bolted on. They do cover the motors which is great for added protection. But I wouldn’t go bigger than maybe a 1404. So far I haven’t broken a motor or arms using them so they’re done really well. But if you want arm bumpers that just slide on you could ask TorontoFPV to design some as he’s pretty accommodating to requests!
@diggsit693 ай бұрын
Hey, do you have file link for 3D printed Arm guards for Discus frame? 🤔🙏
@GarethDix2 ай бұрын
Sure… they’re called bootys which is maybe why you can’t find them but they’re right here and they’re really good! www.thingiverse.com/thing:6237914
@diggsit692 ай бұрын
@@GarethDix yea, I seen them don’t they cover the motors,? Am looking for something just for the Arms ? 🤔🙏
@diggsit692 ай бұрын
Hi, I downloaded the 3D files for the Camera Mount on Discus / Crux35 ,it works for the HD Crux35 in your Video, I have the Analog version with the Caddx Ant Will the 3D camera mount sill work for Caddx Ant? 🙏
@GarethDix2 ай бұрын
That camera mount I use should work for any camera as it just angles in more for a smaller camera like the ant… however given its smaller than the runcam wasp I would look at some of the mounts Toronto FPV has made for analog cameras on the frame as they protect the lens much better as it sits within the standoffs
@diggsit693 ай бұрын
Discus 3.0 arms carbon thickness is it 7Mm? And is it the same for 3.5 Mm?🙏
@GarethDix3 ай бұрын
The width of the arms is 7mm but the thickness is the same size as the baseplate as the arms aren’t removable
@diggsit693 ай бұрын
@@GarethDix Cool, do you know what the Discus 3.0 Vs 3.5 an 4.0 frames weight in grams? 🙏
@GarethDix3 ай бұрын
@diggsit69 I actually don’t know the weights of all of them but I do know someone that does @torontofpv is the maker of the frame and is really quick at responding… he’d probably welcome the suggestion to add the weights to the frame description but it’s probably around the same as the original crux35 frame
@diggsit693 ай бұрын
@@GarethDix yea , already talked to him and watched his video on the different sizes an Weighs. 🙏
@GarethDix3 ай бұрын
@diggsit69 let me know how it goes if you get one… it’s a really neat and simple frame!