Fix Your Bent LCA Mounts

In this video I'll show you how to fix your LCA or lower control arm mounts with these nifty new stronger LCA bracket mounts from TMRCustoms: bit.ly/1OT37Vi
Website: www.bleepinjeep...
FaceBook: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

[@AuburnGrad2008]

Good video. I had to replace the control arm brackets on my D30 about a year back. Got to learn how to weld as well, so it was a good project. Next up is a 8.8 for the rear!

[@MrMrsregor]

do it ! get the 3.25" axle tubes with disk brakes !

[@FilmJunkieOutdoors]

i’m having to pay 650 for both of my front mounts to be put on. I think i need to learn to weld to with these kind of prices.

[@fubar92627]

Hey Matt, what kind of welder do you use for those LCA mounts?

[@Mattmazz77]

Can you please tell me what size the lower control arm mount camber bolts are or what kit to get. Because the original mounts don't have that castor adjustment slot and the mounts don't come with it or list a part number for them. I would definitely appreciate it brother.

[@FilmJunkieOutdoors]

man i wish someone would have replied to you. i’m replacing both of mine front mounts on my tj and got quoted $650 and i’m supplying the mounts i find.

[@Mattmazz77]

@@FilmJunkieOutdoors I finally found the camber bolts but thank you. That sucks brother, that's why I'm glad that I do everything myself. I just have to actually get off my ass and get the mounts done. I did the front driver's side coil spring perch myself and it was actually pretty easy. Now I just have to do the other side and like I said the control arm mounts and a bunch of other things...lol. But you can save so much money doing everything yourself.

[@FilmJunkieOutdoors]

@@Mattmazz77 👏🏽👏🏽

[@benjaminvolesky1653]

that was the cutest little bead ever you had for the filler. almost didn't have to grind it.

[@frankmayo7306]

My old brackets have a regular hole can I switch to these ones with adjustment ??

[@calebsurpass]

Could you stick weld These brackets?

[@RoadHeros610]

Could you have been able to heat it up and bend it back in place

[@dylanhamel88]

I don't really get the procedure for finding the right angle of the bracket. What are you supposed to line it up with?

[@jonryan5339]

I have a huge problem with my 99 Jeep Grand Cherokee and need some advice on what to do. According to a local repair shop in my area upon inspection they found that the right rear upper control arm that ties into the ear on the frame had worn out and broke. I am not sure that would be the proper name of the part, but I need to see if anyone knows the proper name of the part and where I can order it. Plus go about getting them replaced.

[@navedemor5056]

Installing with the axle in just checking fitment but for some reason the control arm (stock) is way longer than where the mount is going to sit on the passenger side

[@weslibby2108]

How much of an angle did you set it at? I'm getting ready to do my drivers side lca mount

[@edu.691]

How did it go? I’m about to weld mine lol

[@marshall7848]

If you need welding sleeves id be more happy to send you a pair. Cause damn....

[@jake102293]

I got the rustys offroad version of these followed another video and never said anything about putting them at an angle am I screwed?

[@bleepinjeep]

not sure, can you get the links in as it is? if so then its probably ok but maybe not the best for flex and such.

[@mbajephter9423]

Where are you located

[@ryanhortin9981]

Can I do this with the axle shaft in place

[@pra3t0rian]

+BleepinJeep I'm sure you have said before but what mig welder do you use?

[@nickguzik01]

Feel free to send those brackets my way. I'll give them a good home.

[@xjmachine2503]

are you gonna run front leaf springs?

[@bleepinjeep]

+xjmachine no, double triangulated 4link front and rear.

[@bleepinjeep]

+xjmachine Ahh I see why you thought that cause I said I wont have lower arms... I guess technically I will but they just wont mount in that location or use those mounts.

[@r6exrider]

i would have used a grinding wheel first. you burn through flappy disk so fast when you got a lot to grind off

[@MARZ1911]

I "straightened" mine ....my wheel ain't straight though....but it drives ok

[@yotasteve3646]

"I press the button and it wacks right off" hahahahaha

[@user-bi7nq4nj7q]

Haha the Bob Ross of LCA repair... not a problem, this mounts a happy little bird now

[@1monstertech]

Like the narrations, there funny. Great video as usual, keep it up Matt.

[@edrodriguez7801]

Hey Matt, I know it's a little bit off the subject but, I got anti-freeze leaking out of the transmission you have any idea or resolution for that. Could it be a hose, bad water pump... just thought I ask for your professional opinion. Thanks

[@bleepinjeep]

I hope not but if so you have a bad radiator

[@edrodriguez7801]

+BleepinJeep thanks brother I appreciate the help.

[@edrodriguez7801]

It's a 99 Cherokee sport XJ 163,000 miles

[@kiyoshi8657]

"Four thumbs up baby!" 😂

[@rustybrowneye]

thats the strangest torch ive ever seen

[@Texasgolfpro]

awesome

[@Tiger_dos]

Mine just snapped off

[@tiffytoo]

Mine broke, I need a welder in Kentucky desperately.

[@Ghandisgarage]

Flapdisk.

[@tawnspeetjens8780]

4 thumb up😂😂😂