Fixed! No more slop on the Porsche Macan transmission!

[@meseahunt]

finally got around to installing, took all of 20min and done, if you are thinking about buying/doing this upgrade just get it and do it, very easy and you will FEEL the diff immediately!! 🤠

[@chrisjfox8715]

What's stopping that bottom one from falling out over time? I see it's press fit but does it not wiggle out from vibration over time?

[@meseahunt]

@@chrisjfox8715 it is SOLID and aint going anywhere!!!

[@Smallvet]

I just installed my Transmission inserts, you can definitely feel the difference. It is a much more smooth shift!!

[@ghlibisk67]

What was the "slop" you were experiencing before?

[@Smallvet]

@@ghlibisk67 it was just like a clunk, and the shift wasn’t as smooth, you can really tell the difference if you end up installing it

[@ghlibisk67]

@@Smallvet Like if you rev match poorly on a manual? A little head jerk and interrupted momentum?

[@michalsnv1212]

Hello. I have just instaled Black Series Powerflex to TRS mount, and its make strong vibrations and strong blow to chasis.

[@bkracoski3283]

Wait I’m confused. Do you have dedicated bmw channel too? 😂

[@yunjung2555]

I just finished install on my cobb tuned 2016 macan turbo oh boy it makes big difference lol. Thank you

[@jordandiab1656]

curious if you can elaborate. consider doing on my cobb tuned macan turbo.

[@mattaue]

Can you expand on how theses made a difference?

[@MrNanah38]

​@mattaue they never do, and if they do it's lies.

[@malcolmfrazier8034]

I see a few guys saying they took this off after awhile

[@Ourgarageautodetail]

Good video! Have you seen any performance gains with this mod?

[@Flat6Motorsports]

We don't have any measured/metered data. I can only go on feel. It seems to feel more direct and like it puts power down better. Traction isn't really an issue with the Macan, I'd say it's more a feel mod than it's going to drop your 0-60 time, etc.

[@Antoine-lv8sl]

Can u list the tools you used to take off the transmission mount?

[@ottoberberena2763]

greetings I have a 2015 Porsche Macan S and using the vehicle it is going down roads from 3 to 2 and after 1 day it pulls very hard and they mention to me what it could be, it tells me that the transmission transfer could be, could you help me.

[@thedoble]

Will this help reduce the 'wobble' feel I get when downshifting?

[@Flat6Motorsports]

Yes, it will introduce some NVH though

[@magicmichael90]

Sorry, what the piece si it you installed? What benefits it bring? Thank you

[@Flat6Motorsports]

If you're local to Orlando, FL send us an email at [e-mail] for a quote. If not, any shop should charge around an hour of labor. The main benefit is it reduces the slop in the transmission.

[@Yummy12306]

May I ask how to remove the engine mount?

[@jonathanl2748]

Would this apply to the refreshed 2022 Macan? Thanks!

[@Flat6Motorsports]

Yes

[@SpikyNY]

Can I Install Limited Slip Differential in my 2021 Macan Turbo. Also Known as Porsche Torque Vectoring.

[@Flat6Motorsports]

Yes

[@meseahunt]

what size are the trans cradle head bolts(torx)? thanks

[@Antoine-lv8sl]

Wondering the same?

[@albertestrella449]

installed it on my 2017 Porsche Macan but had an issue with my car vibrating a lot specially on idle . is there a way to fix it? thanks

[@Flat6Motorsports]

I'd check to make sure everything is torqued down properly and void of any debris. The polyurethane mount will transmit more energy (NVH) through the cabin.

[@965ciro]

The same here! I installed it on my Macan S 2017 and had to remove it because car was vibrating and transmitting the sound through the entire cabin. Quite unpleasant experience have to admit. On top of that, I did not notice any improvement in performance of my PDK gearbox. In my case, it was waste of time and money. Happy to see in comments bellow that some owners had positive experience.

[@meseahunt]

What size hex bit is required? Thanks

[@Flat6Motorsports]

It's a triple square bolt, I can't remember the exact size. Torque Specs: 70nm on the triple square bolts, 20nm on the 13mm nuts

[@meseahunt]

@@Flat6Motorsports thanks for being HALF helpful...

[@Flat6Motorsports]

@@meseahunt your welcome, this set will work: www.amazon.com/Capri-Tools-Triple-Square-10-Piece/dp/B007UQLR9U/ref=sr_1_2_sspa?keywords=triple+square+socket+set&qid=1662393737&sr=8-2-spons&psc=1&smid=A2ZSTDEXO9VTZF&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1NBOE03MlZSNUdWJmVuY3J5cHRlZElkPUEwODAyODAwMkc0RUhNSEM3SE9LSCZlbmNyeXB0ZWRBZElkPUEwMDk2OTY3MlZXRjY4RDA4WVRHUSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

[@franciscobernal1469]

Do have the link to buy it

[@Youngkrisskrony16]

Of Engine Pleasee?! 🙏🙏

[@haroldalca8215]

How can i find it dude?

[@Flat6Motorsports]

flat6motorsports.com/products/powerflex-transmission-mount-inserts-macan

[@stevengraham3138]

Can I do this on my 2016 Macan s?

[@Flat6Motorsports]

Yes, they work on all Macans.

[@antoniomiguelambrospicaso1819]

Lo monte y al día siguiente lo desmonte

[@Antoine-lv8sl]

Porque lo desmontaste? No te gusto como se sentia?

[@Lucky13Twice]

Barely hear the difference? So what that really means is you can hear it, so no thanks.

[@Flat6Motorsports]

Anytime you add more rigidity to a mount, it will transmit more noice and vibration. This is very minimal compared to many but obviously there is a trade-off.