Fixing A Gas Caddy That Leaks

If you have one of the gas caddy cans it probably leaks all over the place. Here is how to fix it quick and cheap.

[@jordancreekfarms6751]

Jared, Thanks for this video. I've had my caddy for several years & it has leaked from the beginning. Not sure how you figured out the missing O Ring, but it worked great👍👍👍👍👍!

[@coachliu32]

Great video. What size O-Ring did you use on it??

[@michaelreyes2901]

Thanks for the video and modification tip. I was about to spend $180 on a new GPI pump and then try and figure out how to attach it to the non-standard bung but the O-ring did the trick.. Thanks!!!

[@zeroto3008]

Thank you for posting this video

[@tangodelta5437]

thanks man...i bought one of these and the pump didnt work. got so fustrated that i lifted it to the tailgate of the truck and poured the gas into the machine i was working with..will try the o-ring trick...wish i ahd found this sooner...THANKS!!!

[@reno4819]

The teflon tape you used didn't look like it was rated for fuels. Also, please check the O ring you used to ensure it too is rated for gasoline. Cheers!

[@strongrabbit9776]

What is the diameter and thickness of the o-ring you used?

[@coachliu32]

Did you ever get a response on this? Really important.

[@shaunmcgowan827]

He doesn't know the exact size, he told you guys in the video that he bought a kit and eyeballed it. You may have to buy a few and test and tune it like he did.

[@strongrabbit9776]

Thanks, Captain Obvious. Next time you don’t have anything helpful to say, don’t say it.

[@Damitsall]

What size was that oring? The kit you had has the size printed on the card on the inside.

[@AngeloPappas-br1gx]

I like your gas cap is the original or something you added. Looking for a new one for my caddy.

[@NCSUME1]

I appreciate the review and have been interested in one of these tanks, but very little legit reviews of them. How has it held up since the o-ring replacement/installation? Has the fuel level gauge worked? Thanks

[@jrodjared]

NCSUME1 fuel gauge doesn’t really work. I just shake the tank to feel what’s in it! The tank leaks a little but when cranking the pump, but nothing like it did before. At least it’s useable now.

[@NCSUME1]

@@jrodjared Thanks. There are a lot of these out there at all different price points and they all seem kinda crummy. Might as well spend ~250 and modify vs 450 and have similar issues. Thanks again. PS. Decent hand pumps cost as much as this rig

[@jrodjared]

@@NCSUME1 It would be cool to compare side by side, but I agree. They're probably both made of the same quality anyway so why pay more?

[@cdoublejj]

seems more like an Fup that made it passed QA, unless folks are complainng left and right about the same issue. if i ever have an issue with my vevor, i'll check to see if it's the same issue

[@dabking2947]

Great video thank you so much

[@roberthayes4222]

Awesome, thank you