Am I the only one who appreciates the fact that Jim still puts out a video showing that he fucked up ?! We all make mistakes, it’s part of the job. Live and learn Jim , live and learn.
@chris96505 ай бұрын
Mistakes are experience. How we learn.
@harryw95985 ай бұрын
was gonna say almost the same.
@colinpierce25855 ай бұрын
I think most wouldn’t have put that video out…fair play Jim
@keithf88905 ай бұрын
How many of us have been there?Its so easyto let a mistake take you down that rabbit hole.All the best.
@00Munki5 ай бұрын
Yeap, fair play Jim
@kevinwilliams48995 ай бұрын
I don't think you waffle too much it shows your thought process and how you approach these things. And from my years in the power industry just because you have explained something it does'nt mean someone else has understood it, but you make sure your viewers do. Also a big up for admiting your mistake insead of editing out. And as you say that is how easy it is to led astray fault finding. Keep up the good work love your content.
@thewiltshirerider014 ай бұрын
Well we are all human and it was still interesting to listen and learn, I try and do my own work on my varadero 1000 and these videos are great for learning how to do things, 👍
@eastcoast50045 ай бұрын
respect mate not many bike techs would own up to making a mistake in my opinion your the best tech on youtube and should have way more subscribers all the best mucker
@flangmasterj4 ай бұрын
One man's "waffle" is another man's enjoyment. This is all good stuff Jim.
@teamgas5 ай бұрын
Appreciate you putting up your mess up videos. We all make them , few have the integrity to show them to everyone!
@stevenrowley94815 ай бұрын
😅I thought the same initially with the pressure. I worked on these bikes when they first came out but never had any problems, however, I also worked in Ducati's up to 2016 and some have very similar set up. Had the same sort of problem which turned out to be engine temp sensor. Some Dukes had 2 sensors. One to feed the ECU, one to feed the temp. gauge. If the ECU sensor was reading incorrectly then the ECU thought the engine was hot, so wouldn't richen the mixture on cold starting.
@DannyM93485 ай бұрын
Excellend video Jim, these uploads are turning into the highlight of my Fridays! To give credit to yourself, with where you started you were on the right train of thought. Props for highlighting your errors. It's easy to let pride get in the way and not admit to it. I believe that anyone who is willing to admit an error and learn from it are the best in their respective field.
@davec17683 ай бұрын
A man who doesn’t make mistakes doesn’t make anything.
@Subjectno235 ай бұрын
Brilliant video, love your logic and the fact you admitted a mistake, an honest youtuber is a rare breed. We all learned from your mistake, thanks! Also, I love the "waffle" so much extra info there, much appreciated.
@brianmcclintock11945 ай бұрын
i love jims openess and honsety when he drops the ball massive respect in thes days of perfect build youtubers we have !!
@kevinsmith-dn1px5 ай бұрын
So refreshing to see Videos where the person actually knows what they're doing! And gives thorough explanations too! Nice work 👏
@sthildas48575 ай бұрын
We are all learning, reversing out of that rabbit hole, glad you told us. Great bike, thx for sharing.🏍
@jbsworkshopАй бұрын
Another top vid. We all make mistakes & sometimes get diagnostics wrong or led down the wrong route with faulty tools & test equipment
@gtimike5 ай бұрын
FAIL? = First attempt in learning . As said we all make mistakes . It's how you learn from them that matters. Stumbled across this channel a short while ago and have learnt a lot especially the scope use(pico). My background isn't bikes but cars and vans and there's a lot that crosses over into those - i do have an interest in bikes including owning a Vespa LX125. The thought processes you use are also very insightful Jim and well thought out even though you might think it's waffle
@paultugwell98554 ай бұрын
You are a fantastic technician and a great teacher keep doing what you are doing, I have taught thousands of automotive apprentices over 30years and you are good
@MarkJYule4 ай бұрын
It's called being human 😊 Your diagnostic process is what matters 🤷♂️ And yours is superb 👍
@tommybjork26745 ай бұрын
I like your videos, because you always show the whole story, including mistakes. Looking forward to seeing the vmax run as well 😊
@davefarmery81802 ай бұрын
I used to those air intakes going through the tank on bikes , great videos mate
@joaoxufre92965 ай бұрын
Yes I remember the split fuel filter on the KTM
@Oli-l5m5 ай бұрын
You know its a real world video because this sort of thing happens - thanks for sharing
@andrewwallis3282 ай бұрын
These videos are absolutely brilliant mate and I’m hooked! I love tinkering with my bikes and it’s great to learn a bit from yourself. Keep them coming
@motorcyclegarage23075 ай бұрын
ST2 filter would fit. Similar pressure. Thanks for the testing detail. Very helpful Jim.
@sirpatrickbikes5 ай бұрын
If it was me I'd probably change the fuel pump and filter anyway as they are old and not that expensive. BTW that RC45 sounds bloody fantastic!
@williamnellist25552 ай бұрын
Hmmm... my kawasaki z750 LAF 2011 Does exactly this symptom but not as severe, I'll have to get it looked at asap. Supurb videos Jim, keep em coming 👍
@camperp1955 ай бұрын
Stunning,cracking piece of kit!
@speedyboolooks5 ай бұрын
“My heads gone”. Know that feeling all too well well 😂
@andyjrichie67095 ай бұрын
Quite funny Jim, easy enough to make mistakes for a professional, super great video,
@JimBiddle.5 ай бұрын
It's reassuring that even someone as experienced as you, can catch yourself out.
@thetonetosser4 ай бұрын
Fantastic bike just standing still.
@garymorgan6285 ай бұрын
If you learn from a mistake then its just a valuable lesson learnt 👍
@TheMostDangerousWayPossible5 ай бұрын
great video Jim!
@ianlee4874 ай бұрын
Jim we all make mistakes your human. Let me say another great video your amazing mate.
@stuwhite19695 ай бұрын
Awesome bike!! that air box lid is a crime
@ragnarironspear17915 ай бұрын
I helped hang one of those from the ceiling in Joey's Bar years ago
@jonahlloyd31494 ай бұрын
Well I learnt a lot about my RC46 fueling system which is identical I would think, so thank you very much 8-)
@Animo924 ай бұрын
Had a vfr800 vtec that the fuel filter had disintegrated, didn't help that the tank had 2l of water/rust mix in it though. Ended up picking up a full aftermarket pump and filter combo for £115
@99gpandy285 ай бұрын
Motion pro injector cleaner tool ,or improvise and ultrasonic clean them ,they prob can't flow test em as most injector cleaner shops only cater for car injectors, but some will ultrasonic clean them anyway but you won't know if they bleed afterwards 👍
@Steve-wx9gl5 ай бұрын
Good honest video love the humour thanks JIM
@IN_ZANE_5 ай бұрын
Still an interesting video, learned something new
@marcusFZ65 ай бұрын
Shit happens but you've told us the small faux pau, so all good. Nice that you've scored a win with the "Lean" start and given it a little sniff of "Start ya Bastard" (look it up if you've not heard of it) Side question - when are we getting the winning video of the V-Max starting like a dream? Keep up the good work
@bobz17363 ай бұрын
Please don't complain about waffling... its all interesting 👍
@benrichards51604 ай бұрын
Let yourself waffle Jim!! Adds another layer to the video, instead of just the bike and whats wrong with it we also see your thought process and your wealth of knowledge!
@garysergeant90864 ай бұрын
Love your videos I do the same thing when working on bikes including swearing
@munter105 ай бұрын
Bikes like this should just be kept in a glass cage in a museum.
@Shifty-t5w5 ай бұрын
Nah, Hondas are made to ride.
@nialbarnsley41085 ай бұрын
What a wierd thing to say strange,
@pauln68035 ай бұрын
I was on a trackday at Donington park when someone stacked a Desmosedici RR. But fair play to the Duc owner for wanting to exploit what it offered, even if it didn't end well.
@michaelallan1082 ай бұрын
So human, so good 👍
@ferguscawley115 ай бұрын
Temperature sensor reading? Poor cold start but fine when warm ( lean condition) ?
@SuperbikeSurgeryTV5 ай бұрын
You are ahead of me 😂
@michaelmccann47063 ай бұрын
Jim's talking and his waffling are both teaching
@spatchist5 ай бұрын
A V4 that isn't a V-Max , makes a change.
@rogerthedodger57884 ай бұрын
@ 15:30 .... me being in my 60's you sound like my Doctor delivering his diagnosis 😂
@NickScrivener3 ай бұрын
Make a t-shirt with 'get to the point Jim!'
@martyndunn19055 ай бұрын
Stop waffling jim 😂😂😂😂
@johnwalker1945 ай бұрын
A faulty coolant temp sender affecting cold start ? High reading might not throw a fault and illuminate the Fi light ??
@markaddy535 ай бұрын
shit happens lad all been there keep at it ul get there great video as always next one please
@dalelyons43664 ай бұрын
I’ve found you on a worm hole … thank god ..
@zweispurmopped4 ай бұрын
Sometimes red herrings just get you. It is what it is. 🤗
@Phil-pw7ko5 ай бұрын
always with Honda's pop off vent line at regulator, wet vacuum hose port is bad, VTX 1800, VFR 800, quite common and diagnostic is quickly known so can be eliminated or discovered in mere minutes,
@stevejones13182 ай бұрын
Subscribed and Liked
@TringmotionCoUk5 ай бұрын
Did I hear MAF sensor? These often fail to lean fuel giving rough cold running and bad starts. Just fixed a Subaru with this issue
@richardjohnson33705 ай бұрын
No maf sensor, it uses 2 map sensors
@DoRC4 ай бұрын
I was wondering how it could run fine after starting with no fuel flow..
@2ane4 ай бұрын
im rather perplexed that someone took a bike as rare and expensive as this and turned it into his track-tool. I mean this is probably one of the rarest japanese production Superbikes ever?
@smd-tech4 ай бұрын
Maybe because thats what it was built for, not to be locked away being a fucking ornament ?
@stobeszx96743 ай бұрын
It may have been a pre-raced version anyway that the guy bought.....!!!
@charlesscottkelly4 ай бұрын
Keep the waffle we enjoy it
@mrflores77085 ай бұрын
How do you calculate the labour costs for the client when there is all this YT filming being done at the same time?
@SuperbikeSurgeryTV5 ай бұрын
It's farley easy to estimate the actual time the job would take without all the messing around with a camera. I then charge 75% of that number. Keeps it more the fair from the customers point of view.
@stevekirk63995 ай бұрын
where part 6 of the yamaha?
@P6_7R_Nick5 ай бұрын
That's a serious case of CBA on the bikes behalf 😂
@P6_7R_Nick5 ай бұрын
Can't Be Arsed to start 😁
@buncobooth5 ай бұрын
I'm only 2 minutes in and I'm shouting "COMPRESSION TEST" at the screen 😧
@SuperbikeSurgeryTV5 ай бұрын
😂
@maxheadvroom19235 ай бұрын
has anyone mentioned the cold start on the TB's yet,
@fw14214 ай бұрын
I can’t believe Honda doesn’t have fuel filters available for this bike anymore.
@j2tmfc5 ай бұрын
Eprom been flashed by any chance?
@pauln68035 ай бұрын
These were the days of race specific chipsets and power commanders.
@eugenecussen37355 ай бұрын
ha ha ya sound like Mark Heap 🤣
@michaelsymons9098Ай бұрын
put some glo plugs on it
@clivecarrington88144 ай бұрын
Great content. Could you be a fellow Welshman?.
@llewvirtue8614 ай бұрын
That fuel filter is still U/s
@oodiddy97785 ай бұрын
only 250 of these ever made.
@wotnoturbo5 ай бұрын
You some kind of chancer, what game on?? 🤣🤣
@munter105 ай бұрын
What a POS! It was once a great bike for it’s time.. and could still be a great machine IF it was kept up to date with maintenance etc. It’s probably been in storage for years and has a clogged fuel system with blocked injectors and blocked fuel filter. Good luck Jim, and that wasted time on chasing fuel pressure gremlins, don’t worry mate, even the best mechanics fall into traps like that 😂