FIXING AND UPGRADING MY VOLVO V50 (FAIL!)

  Рет қаралды 1,221

Spooled

Spooled

Күн бұрын

Пікірлер: 14
@InstinktiveEntertainment
@InstinktiveEntertainment 6 күн бұрын
I recommend getting aliexpress mirror sequential signal lights. I got a pair for my c30 for under 10$ and look great!
@Spooled_UK
@Spooled_UK 6 күн бұрын
I will look into that!
@laulindgaard8658
@laulindgaard8658 Күн бұрын
Wheel and rim size?
@ChunkyOrca
@ChunkyOrca 11 сағат бұрын
why not just buy a longer coolant hose to get the focus rs oil cooler to fit?
@AntonDesigns
@AntonDesigns Ай бұрын
The driveshafts are actually supposed to have that axial play at 12:28. what you don't want is radial play in the cv joints or the actuall shaft for that matter. The driveshaft will split apart like that too, thats part of the design! very tedious if you manage to split it by accident while doing a wheel bearing or something :/ Good video in any case!
@Spooled_UK
@Spooled_UK Ай бұрын
Ahh I wasn't aware! It had split previously when I was fitting lowering springs but I just fit it back together
@Easy-NL
@Easy-NL 2 күн бұрын
Correct: axial play & "splitting" is normal. Radial play indicates wear, however. A little is usually not an issue and it can be difficult to diagnose with the car raised since the angles are different with the suspension extended vs under load. The best indicator is usually noise when your at a (large) steering angle and applying throttle. I expect that most driveshafts are replaced simply because a CV boot is damaged, and with high mileage and low cost for a shaft, you might as well replace the whole unit.
@Jonn3371
@Jonn3371 Ай бұрын
What is Upgrapting mean
@Spooled_UK
@Spooled_UK Ай бұрын
Typo😅
@przemek857
@przemek857 Ай бұрын
My vovlo had the axle shafts replaced 3 times, it was a nightmare. You could have drained the coolant using a syringe, very little would have spilled.
@Spooled_UK
@Spooled_UK Ай бұрын
Yeah I've heard nightmares about driveshafts but the OEM ones are over £600 😭. That's a good idea using the syringe
@przemek857
@przemek857 Ай бұрын
​I recommend checking the tightness of the intake system, In my experience, most of the bolts holding the intake manifold in place can be loose. As for the gearbox oil, the filler hole is on the top of the gearbox, right next to the selector lever under the hood.
@SakibAhsanTamim-x8s
@SakibAhsanTamim-x8s Ай бұрын
Hello, "Spooled" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or ig or where?
@SakibAhsanTamim
@SakibAhsanTamim Ай бұрын
Hello, "Spooled" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or email?
Volvo V50 serwis pozakupowy
17:46
Mechanik z prowincji
Рет қаралды 8 М.
The Lost World: Living Room Edition
0:46
Daniel LaBelle
Рет қаралды 27 МЛН
Counter-Strike 2 - Новый кс. Cтарый я
13:10
Marmok
Рет қаралды 2,8 МЛН
Почему Катар богатый? #shorts
0:45
Послезавтра
Рет қаралды 2 МЛН
Volvo v40 1.5 T2 P018D low fuel pressure sensor b circuit high
7:49
baz meredith 🤙
Рет қаралды 6 М.
Mounting the Nissan Leaf motor in my Volvo V50
18:15
Jan Jouke
Рет қаралды 12 М.
I bought a £500 Volvo V50
7:47
BITU
Рет қаралды 1,2 М.
Volvo XC70 Door trim cladding repair. You can do it!
13:27
volvosweden
Рет қаралды 23 М.
ЩО ОБРАТИ? Volvo V50 чи Renault Megane 3
10:29
ЮРА ГОРЯЧИЙ
Рет қаралды 92 М.
LOWERING MY VOLVO V50! *NIGHTMARE*
8:45
Spooled
Рет қаралды 1,1 М.