Fixing Jello - Mid Throttle Oscillations on your FPV - Drone (GoPro) special technique

In this Video i show you how you can fix Jello / mid throttle vibrations / oscillations on your FPV - Drone and Gopro Video.
-----------------------------------------------------------------------------------------------------------------------------------------------
Follow:
/ ydkm_life
Blog:
www.ydkm-life.com/
-----------------------------------------------------------------------------------------------------------------------------------------------
This is my Freestyle build:
This links are Affiliat links if you buy this items i will get a little % of this and you dont have to pay more for it so if you want to support me... :*
ESC & FC combo: (Holybro Kakute F4 V2 FC/ Tekko32 35A 4In1)
www.banggood.com/custlink/mm3...
Motor: (4x T-Motor F40 Pro III)
www.banggood.com/custlink/GDm...
FPV Cam: Runcam Micro Swift 3 v2
www.banggood.com/custlink/DDv...
VTX: (AKK X2-ultimate International SMA)
www.banggood.com/custlink/GKD...
VTX Antenna :
www.banggood.com/custlink/mmv...
Frsky Receiver: (Frsky XM+ Micro)
www.banggood.com/custlink/33G...
Antivibration FC:
www.banggood.com/custlink/GDv...
Frame:
Armattan Marmotte 105€
Cheap Frame:
www.banggood.com/custlink/mGD...
----------------------------------------------------------------------------------------------------------------------------------------------
Transmitter/Fernsteuerung:
www.banggood.com/custlink/3GD...
Freestyle Props:
www.banggood.com/custlink/KKv...
Best Lipo:
www.banggood.com/custlink/D3G...
Good Cheap Lipo/Gut und Günstig:
www.banggood.com/custlink/3KK...
M3 Screws 4-20mm/M3 Schrauben 4-20mm:
www.banggood.com/custlink/DmK...
Muttern und Standoff Schrauben die du brauchen wirst 4€:
www.banggood.com/custlink/DGG...
Heatshrink/Schrumpfschläuche:
www.banggood.com/custlink/m3D...
My Charger/Mein Ladegerät:
www.banggood.com/custlink/DGG...
+Netzteil
www.banggood.com/custlink/GGv...
+ Adapter:
www.banggood.com/custlink/K3K...
Tools/Werkzeug zum Drohnen Bauen 7€ verwende ich selber:
www.banggood.com/custlink/33m...

[@SimonMain]

Great job!!! Thanks for sharing ;)

[@Hotwire_RCTrix]

Great videos and tips. Thanks 👍

[@Guridrones]

Nd filter solved, motors ok and props too

[@Guridrones]

i will try

[@choppergirl]

Do you locktite your prop nuts? I saved some of that white thin packing foam just as a matter of course, to squeeze between my battery and the quad if I were to mount the battery on the bottom over some screws and to at least provide some minimum cushion between the two on a ground impact.

[@akusreverse2066]

Nice, i have the same problem on my 6" quad, i've cheched everiting , pid tuned , tryed 3 type of different propeller but the jello persist. Now i go to try your solution and see if it work even for me

[@YouDontKnowMe]

akus reverse wish you that it works, that jello is so frustrating, put enough layers underneath it. But not to much that your gopro cant move. Good luck man 🤗

[@cossi_]

Wie hast du dann den Gopro Mount befestigt? Kabelbinder? Hatte das Problem bei meinen anderen nicht nur die neue hat’s und das ist echt ärgerlich. Gutes Video!

[@KLNYC]

Man i hated these oscillation problems.. I soft mounted the motor and the FC plus i have the capacitor on too. In mid throttle, i can see the oscillation on the HD cam. Im going use the soft mount for the hd came and see.

[@YouDontKnowMe]

These are the worst problems.. i Hope it works for you

[@silencefpv7130]

Ganz gut dein Englisch 👌🏿🤣

[@YouDontKnowMe]

könnte besser sein :DD

[@rallysoob]

I have the same astroX x5 frame and i did all this yet still have jello. Its a full johnny fpv build with goprosession5. I swear this frame is just bad design or sumn

[@TimeFadesMemoryLasts]

A cheaper solution may be to replace the ball bearings for a few dollars instead of replacing the whole motor