Fixing leaks in your drysuit

[@maskari921]

Love the humour and super informative video. Subscribed!

[@drbfitk366]

Nicely done video, with the awesome British dry humour

[@michaelalbrecht4130]

Like it. It is amusing and informative. Thanks from Germany.

[@gbdivering]

Thank you ☺️

[@SplitPhotography]

Nice. You don clean of the area of the holes before glue?

[@gbdivering]

You can clean it with acetone if you’re worried the area is dirty

[@Dguinnane1]

Hi does this work for larger areas that are leaking because of lamination? Im guessing I can still apply the glue onto the area entirely although it will cover an area of about 3 inches squared...? Or do you recommend a patch, if so, have you any videos on this too? Thanks :)

[@gbdivering]

delamination is a warrranty issue - send that suit back for a replacement.

[@arwanita]

Just the glue? Aquasure? Without a patch? Is it enough?

[@gbdivering]

Depends on the size of the hole - but I think upto 1cm will seal with aqua sure only

[@MrNachtduiker]

At what point do you actually apply that talcum powder? While the aquasure is still drying up?

[@gbdivering]

After the last coat and when it’s dry to touch ;)

[@MrNachtduiker]

@@gbdivering Great, thanks!

[@ronaldlarsen310]

Have you ever reglued the seams on the TLS ? Do you remove the old glue on the seam entierly ?

[@gbdivering]

If you want to reglue the seems - yes its best to remove, but its hard to know when to stop and you might just do them all and you'll get sore fingers :(

[@ronaldlarsen310]

@@gbdivering Thanks, i have to reglue the crotch area :-(

[@diveinstructor]

Whooooouuuww.... smash that like button!

[@BrutalMilkman]

Nonce jokes!! Hahah

[@DuncanSimpsonGplus]

🤣

[@harambeexpress]

It occurs to me that you should order this stuff ahead of time! If you wait until you have holes you're gonna have a bad time.

[@gbdivering]

Its a good idea to have aquasure/aquaseal in your spares kit

[@DuncanSimpsonGplus]

Don't be swayed by people who are sponsored by a brand, wise words.

[@robledosm75]

Hi! In the previous video you suspected of a leak on one of the cuffs, did you fix it? if so, how? Thanks!

[@gbdivering]

I was able to apply a bead of aquasure between the ring and the suit.

[@robledosm75]

@@gbdivering thanks! will do the same

[@sov19871987]

I stopped buying expensive waders, $40-50 two years and to the garbage it goes. Thise companies don't want waders to last for a long time.

[@gbdivering]

Yes this technique would work on waders too.