Fixing LED Christmas Lights - Fuses Explained

Repairing LED Christmas Lights
Link to Fixing Christmas Lights video:
• Fixing LED Christmas L...

[@daytonagreg8765]

It’s almost NEVER the fuse.

[@hellhound-si5oz]

GE has connects 6 and that does use a single 5 AM. Miniature, fuse, they are so a miniature light string. They are polarized, other brands as well. And then you had the C7 and C9 that use the single 5 AM fuse, and then you also have the pro line sockets for C7 and C9 that are unfused and just rely on circuit breaker. I have taken at 10 AM. Confuse and put it into the C7 and C9 sets for nuisance. Fuse, blowing The fuse will still go away quicker than the circuit breaker will

[@robcampbell834]

I have a 100 count led c9 noma string that every time i plug them in the fuses in the plug blows. I have checked all the bulbs and visually checked for broken or exposed wire and dont see anything wrong.

[@asthadhar5463]

Hello, can you tell me how to repair female plug on the lights ? The end female connector plug is not working in my case. I tried prying with my screwdriver, but it doesn't open the case. Any suggestions on special screwdrivers is also helpful !

[@alandavis5059]

Hi I have the same plug flat blade 125v but have lost the transformer plug that it plugs into would you know where I could get one 240volts in the uk tks

[@ricardosolorzano3993]

Hey, I need some help. I bought a bunch of Christmas lights for my backyard and I spaced them together to have one full connection. And they worked for about 30 seconds and they just went out. Could it be the fuses that can’t handle that?

[@ricardosolorzano3993]

Spliced*

[@rudijones]

Definitely the fuses

[@JD-nb4rp]

Helpful. Thank you. Would have never figured out how to get the fuses out without this video. Changed both fuses. 1st half of string remained dark. I changed out the first bulb in the string. Still dark. Was a bad bulb at the end of the dark half. Changed it...worked!

[@wrench]

mother bought all new lights to hang up last minute, box says to not chain them together, i did it anyways and tonight they all went out after a couple hours, have been good for about 4 days till tonight. im guessing the fuses popped and i can put new ones in and itll work but how do i prevent this from happening or is there no way.

[@justinflott5133]

Reolink cameras still working? Mine all died a couple weeks ago. All south facing but not enough sun to keep up and temps too cold to charge most of the time. A bit disappointed.

[@XNY556-Apple]

I have a string of LED lights not working. I want to change the fuses but the plug does not open like in your video. There's no sliding opening.

[@samuelkibarita1890]

Half of my led lights are working but the other side doesn't not work and I tried to change every light and the fuses and it's still the same

[@Daddyfarmer]

5 strand in sync they all went out! Led lights btw

[@tonytierney1769]

Both of my fuses are good but none of my lights work. I have c9 led lights. I put a tester on my wire & it shows power. Love to have your expiation for this one.

[@rudijones]

Check out my other video Fixing LED Christmas Lights - Half/Full Strand Out - EASY! - No Special Tools - Works Every Time! kzbin.info/www/bejne/oYTCiqZvq9Glq6c

[@brianbinkle799]

Rudi Jones what if you have a strand of lights that has power going through it but a quarter of the lights are dim?Is it a bulb or fuses?

[@rudijones]

Bulb likely