Fixing Saggy Suspension on a 35 year old truck | Ironman 4x4 Lift kit for 1st gen 4runner

My leafsprings were nearly touching the bump stops so i installed a 2 inch lift kit from Ironman 4x4 USA. I think i may have bought the last IFS kit that iron man 4x4 sold, and it's the ONLY kit ive seen that doesnt lift to the point of straining the front axles. This was a relatively straight forward install, and i wish i had done it sooner.
for anyone wanting this particular kit, I'm pretty sure I bought the last one
____________________________
for 5% off at Fr.sport use this link frsport.com/?r...
Additional on Track Photos by CaliPhotography
Music provided by Artlist Music
#TeamAMSOIL #konigwheels #CuscoUSA #teammomo #momomotorsport #blackmagic #hotrodcameras
Follow these cars on instagram @RassoolRacing

[@ratpinscher]

I like your honesty brother. So many KZbinrs come across as know-it-alls

[@forthebiscuit7519]

Looking forward to more 4-runner content in the future! keep up the great work mate :)

[@S.ZOEFELIX]

I have the same truck! My husband and i are re-doing and cleaning it all making it my ...i mean OUR...dream Lol Thanks for the video! Happy trails!

[@locustpocus407]

Working in the same vehicle be great to have a yarn about the troubles n tips youve learned

[@demonghibli89]

I was taking a dump and the toilet clogged... But luckily this shop has lots of tools so lol 😂😂😂😂

[@sexbastianoo1]

😂

[@JOSESANCHEZ-rm5kc]

Luckily the shop has tons of tools

[@monkeyssj1]

lol luckily this shop has lots of tools

[@ratpinscher]

^ tools ^

[@onetwentyeight]

does that shop have lots of tools? :) nice vid, reminding me my 85 has a droopy butt too. looking much better w/ the new stance. If you want to upgrade the brakes, i recommend the fj80 master, v6 calipers, vented rotors, and a dual diaphragm booster from a t100. I just did that to mine and it's way better than the old 4 cyl calipers. Whtas going on w the trans?

[@RassoolRacing]

Lots of tools 🤣 Mine was a 3.0 originally so some of those braking upgrades are already in place. My next move is to replace the load sensing proportioning valve with a manual wilwood one. As far as the trans, it's just not wanting to shift up and stay in higher gears when it's warm. At cold start it'll shift at 3k rpm, but once it warms up it doesn't shift till 5k rpm :(

[@danhornik598]

Just a heads up, @3:26 you have the anti-inversion shackle installed wrong. That triangular part of the shackle needs to be pointing towards the front of the truck, not the rear, to prevent the shackle from inverting. Should be easy enough to get under there and just flip it 180°. I just put ome springs, shocks, and shackles on my 87 4runner over the weekend and had to google which way those anti-inversion shackles were supposed to face too. Nice truck though🤙🏼

[@RassoolRacing]

Thanks dude. I'll take a look at it, but if I remember the install, this was the only way the triangle contacted anything. I'll give it a try though

[@RassoolRacing]

Hey dude. I just heard back from ironman 4x4. I sent them pictures and they said my shackles are the right way round. Good luck with your rig dude.

[@charlesbronson8680]

If you're going to go replace the brakes upgrade the system to the later third gen 4Runner calipers 1-in master cylinder, dual diaphragm brake booster and 88 Land cruiser rear wheel cylinders.

[@Dino-krfe]

now we really wanna know how many tools did the shop have

[@galkawarrior]

Man… you were lucky that the shop has lots of tool…

[@peppe69blue]

Hi , love your vid. Great work looks tops. Q. In Australia i cant locate a nudge bar / bull bar which holds the spot light's. Does anyone know where i can locate a front nudge bar like this through a link wrb page or have one they dont want. One that holds a winch would be awesome also if possible.

[@liveoak7838]

funny how you point out the difference between the tires on the front and rear wheel wells as if they are the same height. The front is higher by design so when the truck is level, there will still be more space in the front

[@RassoolRacing]

Yes. The front height is also adjustable using the torsion bars, so it's really more about the saggy rear leafs. but it's not like I had a stock truck to compare it all to.

[@lorenzotate5578]

how many tool that shop got ?

[@markreynolds3850]

👍

[@884runnerr]

What size tires are you running on this video?

[@RassoolRacing]

31s

[@GOOD_DOUGH]

I think his shop has a lot of tools

[@Perrito504]

Price for the suspension??

[@AmeerKhan-e5w]

How is the new torsion bar

[@RassoolRacing]

Good! I'd needed to adjust them after a little bit to set the ride height once everything had settled, but other than that, it's been smooth sailing

[@tribunation]

I bought Ironman leaf springs not even a year ago and they are already sagging.

[@RassoolRacing]

Oh man. Good to know. Did you get the heavy duty or light duty springs?

[@tribunation]

@@RassoolRacing If I remember correctly I bought the medium load leaf packs.

[@dadgarage7966]

I'll never buy another Ironman product. Quality control problems are one thing but i got zero customer support for any of them. My queries went unanswered. I even phoned its head office in Australia and the employees there brushed me off and told me i had to deal with the "North American distributor" -- some rural fab shop no one's heard of.