Fixing the miss or rough idle on a Ford V10

My mechanic said this is what he sees more than anything on these engines....he had the exact same problem with his.

[@Thayleon]

You know it's a good video when you want to watch a DIY guide and it starts with an old guy complaining about technology

[@DoingItCheap]

LMAO !!!! Now how about subscribing !!!

[@Bigbird_406]

I just bought my 99 F250 V10 today of Facebook market place and get home with it and wouldn't ya know it started loping. Found this video, ran back outside and sure enough that PCV elbow was dry rotted. Thank you so much for this video you boosted my confidence and saved me a visit with the stealership! Cheers to you sir!

[@DoingItCheap]

Glad I could help

[@rojeanabivins4697]

Thanks so much for this video. We have a 2000 F250 V10 that has had this issue for the last couple of years. We were dreading taking it in for fear of the possibility of a $2000.00 repair bill. My husband checked this out and sure enough the part was cracked. He went to the ford dealer for the part, been discontinued. They told him to try NAPA. He went there and they had the part (PCV end assembly 630-1671) in stock. $12.71 fixed the truck.Thanks again!

[@DoingItCheap]

I love it when a plan comes together !!!

[@porktreemonkey]

I used to sell autoparts years ago. I recognize that hose. Go to the parts store and ask for a waterpump bypass hose for a 1976 f150, 302 engine. It will be the exact hose he used. Gates hose number 20662

[@AntonioClaudioMichael]

kelly rome nice tip of info

[@fudgepuppy9683]

Thanks friend good info

[@motocr101able]

I can’t believe after all this time owing this does E350 super duty RV. And going through mechanic after mechanic performing all kinds of leak down test and vacuumed test. It was the elbow you described under my throttlebody. Buried way under. Thank you thank you so much. Just fixed it. Never sounded so good. Heck of a lot of work to get to and can now see why they kept missing it. You saved me so much money

[@creekwalker62]

I've been a Chevy man for 30 years. 3 months ago I found a 2001 F250 Super Duty XLT V10 4X4 with 136K miles for a great price that I couldn't pass up. I have a lot to learn about Fords. When I replaced the spark plugs I couldn't believe some one had put Autolite plugs in it and they were gaped at half of what they shoulda been. I installed Motorcraft plugs. Motor runs much better now. I also replaced the rear diff fluid...It was way past it's fluid change interval. I am going to tackle changing the front diff fluid very soon. Over all I like this Ford. That V10 shore has a ton power! I've had to rust proof the under carriage also. On a quiet night you can hear Ford trucks rusting ya know. lol. Great video sir, good information, I will check mine today.

[@user-vl1yc7yc9s]

Perfect fix eliminated the stutters and what i thought was mis fire. Thanks keep posting

[@DoingItCheap]

Glad it helped !! I hope that means I have a new subscriber !! Have a nice day !!

[@PHISHY-iy4ji]

My 2000 F250 V10 just blew out another spark plug for #2. I put a helicoil, new plug and coil in and it wouldn't run. Came inside to research it and saw your video! When the plug blew out it knocked the hose off . I never would have seen that connection back in their. Saved me about 250$ and a lot of time. Awesome!!

[@DoingItCheap]

Glad I could help !!

[@gregoryfisher1898]

Didn't take all day to lay down the truth. Straight Forward. I'm Subscribed for life. Thanks

[@jeffvinyard3643]

You are THE MAN! Tell your son that you have graduated into the 1990s! I also had to fight that hose, but it fixed my truck! Now I am going to watch the rest of your videos. Thanks!

[@daviddominguez306]

Buddy. I owe you a beer. Was all set up to tow my F-250 in to my buddy’s shop on Monday to troubleshoot the issue. Watched your video. Found the hose in question connecting to the valve cover. Taped it up with electrical tape and boom. She fires up and stay lit. Just need to replace that hose. You da man.

[@DoingItCheap]

I will appreciate a cold one, but I would really appreciate it if you would subscribe to my channel and tell others !! Glad I could help you !

[@Cayman306]

This was it!!! For two years I’ve worked on a farm and we have a F-450 V10 service truck. Thing ran like poop. It is our main truck and it was just getting worse over the years and no one could figure it out. This video helped a ton! I checked the hose and it had a hole. So I did some farm hackery and she runs like a top again.

[@DoingItCheap]

Glad I could help !! That is what this channel is all about ! I hope you are now a new subscriber !!!

[@bullrun44]

I just subscribed and thank you for the video. I have 1999 F250 V10 SUPER DUTY that I purchased just before 9/11. I must admit that V10 has so many anomalies and quirks and not being a ford mechanic causes me many hours of internet, parts stores and other nomadic avenues of research. Because of people like you who post worthwhile and very helpful videos, I have managed to repair most issues myself. I will be changing my oil today 20MAY18 and will conduct a check of that commonly afflicted area as preventive maintenance. Thank you again Sir.

[@allenorea2246]

Thank you so very much we need more people like you to save people like us hard working people from given up our first born to the dealership's. Thank You Sir.

[@DoingItCheap]

I am glad I could help you. I hope you have subscribed to my channel. It is full of ALL kinds of stuff !

[@jcarter5021]

This helped me out a ton. This was the issue with my V10. Thanks for making this video.

[@benrocklyfe8789]

Thank you! Had replaced everything did the whole 9. Still the misfire. Found a crack in the back of this hose. Fixed, running smooth.

[@filmvi37]

Same exact issue I had !! THANK YOU!! I Have the V10 2002 E350 Superduty. The Hose was fine but just came undone from the throttle body.

[@DoingItCheap]

I am glad I could help you !!

[@Joesdifferent]

You are a thousand percent right and you can hear a hissing sound that hissing sound is when you have the hood up and you have your face in the engine looking to listen for the hissing sound I tried to fix mine with clear silicone caulk which worked for awhile

[@tomburger7424]

Great Video , I can relate to " if you can't work on and fix it , you don't drive it " I grew up in the 70's the same way . You made my 1999 F250 V-10 and myself very happy that I found your video , fixed it in about 10 minutes after fighting with it for a couple weeks , Thanks !!!!

[@winatwell533]

I just bought my 99 and I was told that it was 4 of the spark plugs. I think Im gonna look at this before going any further. Thank you for schooling me today. My V10 is something new for me. Give me back the 60's and 70's and I am a happy man.

[@arohk1579]

Very good video doingitcheap as a technician here in Canada this is a very common fault and easy to fix. For the most part you can almost hear the leak if it's bad enough or sweep over the engine with a stethoscope. As far as diagnosing goes this is a very easy find intakes are another issue as well, using the short&long term fuel trims can also point in the direction of what it could be.

[@backroads82]

Glad you got your truck fixed. Its amazing what a vacuum leak will do on these newer vehicles. It can mess with so many things. On the old ones it might miss a little but that was about it...unless it was a huge leak.....then you knew from all the hissing going on. I had the same thing happen to me on a ford escape. Elbow on the pcv valve split right in the bend. Problem was that it was at the back of the engine between the engine and firewall. I just about gave up on that one...LOL

[@DoingItCheap]

I raised the hood and said "Nope, taking this one to the shop!"

[@tonymiller981]

I was going to change my spark plugs on my E350 van to solve this problem, which would have been a nightmare! But I saw your video while looking on youtube for instructions on how to remove the spark plugs. I took off the air cleaner, removed the accelerator/cruise control cable bracket and found that elbow. Pulled it off, and sure enough, it was cracked! You saved the day!! Only took me about 10 minutes!

[@DoingItCheap]

I am glad I could be of assistance !!

[@davidday2994]

Thanks for the reminder that seems to be one of the only things that messes up on these great old trucks.

[@Precisionreelworks]

I've been chasing issues with running rough on my 2000 excursion V10. In replacing coils, I had seen the pcv hose was very dry rotted. Got a new pcv valve from O'Reilly along with a 11/32 crankcase hose. So far seems to be a good roadside fix til I can get the actual part from the dealer Difficult part is 99/00 has a heated pcv valve

[@jesseprice7639]

THANK YOU THANK YOU , my v-10 would not even idle i had to hold brake and gas at redlights to keep it running...looked under truck and catalytic converter was glowing red so i cut it off thinking it was a clogged cat but didnt help...i watched your video and popped my hood and hose was completely disconnected..i hooked it up and truck runs perfect except very loud now without the cat so thats my next fix.....again thank you for sharing

[@DoingItCheap]

Glad I could help. Please share my videos and subscribe !!

[@johnwilcox521]

Spent months trying to figure out what the problem was by looking it up online. Found it immediately after watching this video, thank you sir!

[@DoingItCheap]

I hope you will help an old man out by subscribing and telling your friends about my channel !!! 😉

[@johnwilcox521]

DoingItCheap Sure thing! 👍

[@DoingItCheap]

Thank you. It helps us creators a lot !!

[@gregoryfrederick9873]

I've watched 100 youtube videos trying to find the problem with my 2000 F250 V10 and it's incredibly rough idle. You're video saved me hundreds of dollars. An $14 hose from O'Riellys fixed the problem immediately.

[@gregoryfrederick9873]

I have a PhD in Microbiology. Tell your son I said you are a genius! Thanks for posting this video!

[@DoingItCheap]

Thanks Gregory ....... or is it Doctor Greg ?

[@willsherman5392]

Helped a lot! My fathers exursion would idle roughly. I replaced the vacuum hose, which was dry rotted on closer inspection, and the PCV valve just to be safe. Worked like a charm! Thanks so much!

[@DoingItCheap]

Outstanding !

[@gabrielpoulain3619]

Hello I just wanted to say thank you so much for your video as it was the exact problem I was having. I had to make shift it for now I just took it strait out and hooked a different hose to it and she is working great. I might even get around to buying a new part for it but for now it is working. Next I will replace the transmission oil and hope that cures it from jumping back into 2nd gear as I drive but lately that is not happing even though it is warmer. Then if that is good I will replace the rotors and I might even have a truck my wife would drive again and I can tow our trailer. Well if you ever are up in BC you can stop by we have lots of room. Lenard & Asta Sanders

[@DoingItCheap]

Glad you could benefit from my video. I hope you will subscribe and become a loyal viewer !! And tell your friends about Ol' PawPaw !!

[@the4rsofrc83]

THANK YOU! Just replaced EGR and EGR solenoid thinking that was the issue (in all fairness, it did spit out EGR codes a short while ago), but I never thought to follow the PCV line. Found it was rotted away just under the TB. THANKS again!

[@DoingItCheap]

Glad it helped!

[@AaronFernandes__]

This was amazing! Nice intro to show what the symptoms were, and showed the problem with no shenanigans and went straight to the point. You just earned yourself a subscriber.

[@DoingItCheap]

Welcome to my channel !! I hope you will share my videos and tell your friends so this channel can grow !

[@herbnalis3723]

I replaced all my PCV hoses using STRAIGHT PCV HOSE sold in a 2 meter pack at auto parts store & used hardware store HOSE CONNECTORS for FUEL & OIL TRANSFER which are HIGH IMPACT PLASTIC & come in straight, 90 deg elbow & t-piece fitting.

[@buddywarren3913]

Man I really appreciate that you uploaded this video. It's exactly what the problem was, you saved me a ton of headache

[@DoingItCheap]

Buddy, I am SO glad I could help you ! Thank you very much for subscribing to my channel. It means a lot to me !

[@roberthudlow8327]

My truck is doing this just every once and awhile. Going to go check it out! Hope it works. I'm on a 4000 mile trip pulling a fifth wheel. Thanks.

[@juliojames5986]

I have 2000 F-250 4X4 6.8 V 10...180000 miles on it . No engine or transmission issues . Fuel pump and gauge only issues, those in the confuser. Great truck. Thanks for the tip.

[@millerhunn]

So glad I found this video because after I watched it I checked my hose and it was all busted up. So instead of working all afternoon it only took a few minutes to fix my misfire

[@DoingItCheap]

Thanks Seth. I hope you subscribe !!

[@robertjolley3587]

I was having the same idling problem. I changed the fuel filter. I cleaned the air sensors. I checked and all the vacuum lines were hooked up. Nothing seemed wrong. I was about to make an appointment to take it to the mechanic when I saw your video. I couldn't feel anything amiss, but just to be sure I sprayed a small amount of starting fluid in that area. The engine immediately revved up. I knew I had found the problem. I found a preformed water hose at the parts shop and my V10 is back on the road. Thanks for the advice.

[@garciareviews1455]

I'll tell you this much buddy, you taught me to make baileys time back and now you taught me how to fix my truck! You made a subscriber outta me!!

[@DoingItCheap]

LMAO !!!!!!!!!!!!!! Welcome, usually just the Bailey's does the trick !

[@AntonioClaudioMichael]

i also miss the old days were you can look under hood and see a engine and radiator

[@jesusmendoza9209]

hi just wanted to thank you for the video short and simple strait to the point just like good old days

[@daveedaustintexas3182]

Thanks for the video! I’ll check my pcv connections on my hiccuping, stumbling, no get up and go on hills Triton v10 on my MOTORCOACH! Just subscribed too!

[@fstlnj29]

Going though this now. Truck has been to the Ford Garage twice and they can find anything wrong. Runs okay but will stall out at idle if it is in gear. Going to check this out. Thank you for posting this.

[@davidcrumrine1165]

Just bought a 1999 F350 that is doing what you described. The guy couldn't figure it out and I haven't really had to much time to spend on looking at it. This gives me something to look at and see if it was a well spent $900.

[@davidcrumrine1165]

Finally took the time to look my 900 dollar SRW F350 Superduty V10 Triton over and this was not the problem. It was an easy fix however, the guy replaced the battery cable ends and he didn't tighten the 2 bolts that holds the positive cable into the new battery end. I never would have guessed that that would have made the truck miss so bad at idle but smoothed out at higher RPMS. Just thought I would share my fix to give someone else the idea to check their battery connections.

[@dasteufelhund]

Hi five from New York! Heck ya! My '03 Excursion V10 thanks you!! Also, dielectric tune up grease is these Coil on Plugs' best friend.

[@eugeneredsteer919]

Had the same problem on my 2000 250 6.8 V10. I found the leak and the fix was easy. Never any other problems with it...good motor. Good video sir.

[@willdanzeisen3844]

Not sure about how much I learned but I had fun watchin and listening great vid...

[@eriksojka8358]

I'm only 48. but I agree with you about the old cars. I had dusters with slant 6 engines and could replace anything in minutes. even an alternator in 15 min. I miss those days. great video

[@DoingItCheap]

That slant six was probably the best six cylinder ever manufactured !!!

[@lukeroonie]

"Vee-Hickle" gets me every time...

[@joelc7476]

Just bought a 99 250 V10 2 days ago w/137,000 mi. My first V10, and don't know what to expect but i'm hoping for the best. I subscribed to your channel today and will be following along for all the good advise and experience to help me along the way that you and your subscribers are good enough to share.

[@DoingItCheap]

Welcome Joel !

[@yorkit2]

Hey- Thanks for the fix-it tip. I had the exact same problem, I was ready to change fuel filter and start testing the coil packs. Took me a short time to tape it up and put it back, now I will locate and replace the part. Thanks Again - Jim

[@allenmundorff3941]

Excellent video. For my information, you told us the make and model, but not the year, a common oversight on a lot of vids I watch. Just wondering what the fuel trims were like. And thanks for the upbeat signoff. My first wife used to have the same one. Have a good day and a better tomorrow! RIP Sue. 1956-2004 I still love you sweetie.

[@artmatthes3559]

Great guy I wish all KZbin videos were like that. thanks for the help I appreciate it. I have a 2000 E450 Ford motorhome it was doing the same thing. thanks

[@DoingItCheap]

I am glad I could help you Art. Thanks for watching and I hope you subscribe !!!

[@TexasGabby1]

I had an old Ford pu back in the 80's and had the same thing with the PCV hose....when you first mentioned your issues on this video - I thought to myself yep PCV problem.

[@codycheney3401]

great yo got it fixed and back on the road !!!!!! this will help if i have problems down the road ! Have a great birthday tomorrow !!!

[@rshep5786]

I had the exact same vacuum leak. The only problem I have had with my 1999 F-250 6.8. Great truck.

[@alonzogodschosenwarrioroa1716]

Yes yes yes Sr it did help me your vid it takes a lot of courage and a real Godly man Humble to say it like you did God blessed you and your family I have been having trouble with my Ford Expedition 2003 since the first day I bought it in the dealer but is long story one day when we are in heaven soon I will tell you The Whole story but I am trying to learn and figure out what can be making my truck go misfiring so bad in the last month but I will have those hoses replaced and I will keep you posted Sr thank you again so much for taking the time make this vid.

[@DoingItCheap]

Please let me know if this was your problem and you were able to fix your missing.

[@alonzogodschosenwarrioroa1716]

DoingItCheap yes Sr I Will

[@justinphillips6136]

My man is wearing coveralls.... it’s like my grandpa. Question nothing he says ..lots of living between those ears. Excellent video brother.

[@DoingItCheap]

Overalls, not coveralls. Coveralls have sleeves and usually zip up.

[@56buickrolling62]

Hello thanks Sir... My 98 E350 van was running like crap .wouldn't stay running and if it did ran like Crap.Low and behold it was the hose on the PCV Valve it was just dry rotted..THANKS for your Video my friend

[@DoingItCheap]

Thank you for watching. I hope you will subscribe to my channel and tell your friends to help me grow !

[@shawnbanik8475]

Had this issue on my 2000 excursion and ur right it's hard to get that part. Had to make it out of vacuum hoses and parts.

[@markgilbert2335]

Thanks I’ll look for this. I appreciate your time

[@DJKENNYG57]

Happy birthday again Brother Bob, I still drive around in my first car from High school, It's a 1975 ford Pinto, lol.

[@DoingItCheap]

I used to race Pintos on the local dirt track.....called the Pony Class !!!

[@robertmarkward4051]

Turned out mine was simply disconnected! Thank you for this video!!!

[@TheCharlot38]

I've bought a mustang with a swap of this V10 and it was starting to miss so I will look for that thank you!

[@TheCharlot38]

I was pretty scared cuz I thought it could be the spark plug and I've heard that those V10 have a huge default with their spark plug, so it make me a little less worried

[@kdm1234gmail]

wasn't the problem dads having, but very informative and straight to the point. Thank you. Definitely subscribing.

[@amishpope]

That's way to fancy for me. I like my old 38 Plymouth motor. It looks like s box with six spark plugs sticking out the top. Happy Birthday my friend and many more.

[@DoingItCheap]

Thanks. I miss my 1963 Falcon.

[@usiviopugh4566]

The crickets in the background make excellent background music!

[@prayingairman1877]

Great video. I have a 1999 F250 and it turned out the TSP sensor was the culprit. If it's not the hose replace the sensor.

[@stevejahn165]

This was exactly what was wrong with my 99 F350. $20 part on amazon and ten minutes to swap it out. Thanks for the video!

[@DoingItCheap]

Glad I could help you !!! That is what my channel is all about !

[@rickyrich9594]

what is the name of that part?

[@patricksypersma4677]

Done two of em on Fords like these, can feal the 90 degree fitting, used a wash machine hose chunk of tubing. .And two other Ford cars of my own. one was a Mazda with ford Engine. Its the Ethenal.

[@freedom1439]

I mis those days too. My 2000 SD v10 started missing and OMG.....the smell......Finley it was a coil......

[@williamn4983]

Thank you saved a a lot of time and money. My hoses were good I have an E350 Super Duty Van found the hose on the back of the throttle body had come loose. Pulled it apart cleaned everything PCV and TPS sensor sense I had it apart runs like a brand new again. If you are ever in Pueblo look me up Lunch is on me

[@DoingItCheap]

Excellent!

[@toddogre2491]

Happy Birthday Bob!!! I hope you have a lot more!!

[@DoingItCheap]

Thanks Todd !!! Me too !!!

[@toddgoss7934]

Thanks for the video and a very helpful bit of information. I just picked up a 99 f250 v10 and it has a slight mis at low rpms but on the road or freeway you cant even tell. I will definitely check this out and thanks again sir.

[@DoingItCheap]

Thank you for watching Todd !

[@stevenpdxedu]

Hey, thanks for putting this up, I'm just about to buy a used V10 and am rooting around for problem fixes, cause I don't know the complete history of this vehicle. I'm sure this info will come in handy.

[@wivincent90]

Thank you so very much couldn’t find the issue but after watching this the truck runs great

[@thetrain5785]

Im a mechanic up wa state have my own shop. While i am a ford guy to the bone we make a great deal of money from them lol maybe thats why there my fav.. usually is vacuum leak or mass air flow sensor issues! For poor running .

[@backwoodsbrewer]

Boy I sure miss my old 77 Chevy Stepside. Like you said, nothing under the hood except an engine and radiator. Hell, you could almost stand inside the engine compartment!

[@DoingItCheap]

Dang straight !!!

[@backwoodsbrewer]

Unfortunately, back in my wilder days, a dang tree jumped right out in front of me :/

[@fposmith]

I had the same problem with my 2001 Ford ranger 4.0 SOHC. The "check engine " light would come on and it ran like crap. Well it took about 3 hours to find. I had the codes pulled on it for free at Autozone. And every time I did, it said something different was wrong. O2 sensors, EGR, MAS. Well it turns out, after running down every vacuum line on the engine, I found it. An AC hose was crossed over that thin hose you are talking about and it wore a hole in it. It could not be seen unless you lifted the AC hose. I replaced it with a piece of heater hose. Problem solved. Vacuum leaks can drive you nuts. Especially if they reseal themselves when you hit a bump and leave you with the "check engine" light on.

[@davidjennings4589]

worth the whole six minutes...

[@ldhroks]

This was the fix for my ‘01 e350. The connection into the intake was almost impossible to get at but the elbow had 2 holes in it and now it runs smooth as silk

[@DoingItCheap]

Yet, you haven't subscribed to my channel.

[@landonhinkle7132]

Wasn't my issue but it was the first video I watched and if she ever starts to run rough again will be the 1st thing I check. I agree tho Sir, so many simple fixes that take all damn day sometimes, because of failed information from google, bing, youtube, or any other damn search engines.

[@briantherion5464]

My 01 excursion is doing the exact same thing! Checking that issue tomorrow and thank you for the video

[@DoingItCheap]

Sometimes I will take a piece of rubber hose and use it like a stethoscope. One end at my ear and then poke around with the other end listening for a hissing sound.

[@woodman1701]

Yeah, I’ve had that problem on more than one Ford truck. Vacuum leaks can be hard to find.

[@noahnadia070211]

Thank you for the info. I just got a 2000 ford excursion with the v-10 and it has a misfire, I'm going to try this fix

[@johnhampton5320]

Thanks, I've replaced all the spark plugs and both oxygen sensors to solve my lower rpm missing problem. They helped but didn't completely solve the problem. I'll check the EGR valve and hose leaks next.

[@AaronBLewis]

Picking up 2000 f250 v10 tomorrow that's missing will check that out.thx for vid

[@rodneyhardee2527]

They are famous for that. The v8's are the same way. Changed mine about a month ago. Easy to find on eBay. Have a good one.

[@rbeau129]

Thanks, I'll check this out in AM. My 2003 E450 service engine light is on and hard starting. Thanks again great video.

[@DoingItCheap]

Thank you.

[@guerrillaradio9953]

Well, I tried this, but it ended up being my coil packs. Luckily, I found a rewound, guaranteed set on ebay for only $70 for all 10. Thanks anyway; it was looking pretty dry rotted and shabby anyhow. Appreciate your trying to help. Take er easy.

[@DoingItCheap]

Thank you for sharing !

[@96txtoastiii65]

Will check this on my 5.4 3v just to be sure, swapped all plugs/coils next thing is to check this then then catalytic converter, great video!

[@DoingItCheap]

You wouldn't believe how many people have found this to be the problem over several different engines and year models !! Thank you for subscribing to my channel. I appreciate you !

[@meseyc]

Old guy with suspenders. Check deep southern accent. Check Bitchin about the engine spaghetti. Check Adds up to a damn good video

[@DoingItCheap]

LMAO !!!

[@buffalodiesel1809]

Thank You for your time..... A FORD dealer would charge a fortune fixing unnecessary components.

[@DoingItCheap]

Glad to help

[@AntonioClaudioMichael]

good video helped me with a 2005 ford excursion with a v10

[@christianholmstedt8770]

I got a '02 E350 with the V10 (210k miles) and it's missing a couple of beats at idle but runs fine otherwise. A bit of injector cleaner made it better but I'm going to check this. Thx.

[@ericaman5393]

My 98 F450 just threw a P0309 (Cylinder 9 misfire) code yesterday. Will have to check this out. Hoping it fixes my problem!! Subscribed!!!

[@rachelh5448]

Thanks so much for the video! we just bought an 01 excursion that was doing this. Searched around, found your video, & sure enough..... ours was completely dry rotted, someone had stuck a chunk of garden one inside the part before the 90 degree and stuck it back on!! Who does that?!? Anyway, we're now fixed up! Thanks again!

[@ben2687]

😂 someone did the same thing on mine!

[@garytripp8809]

Great video I'm having some problems like you described I'll check pvc hose and valve thanks

[@jeremyhagler7283]

A friend of mine had the same problem.in the winter.crazy enough frost was causing water to run down the number ten wire and crack the spark plug . just a little info if you have any problems.thank you for your time and great videos.

[@grantgarza6783]

That was some great information thank you.it was unplugged on the valve cover side on mine.