Fixing up a Allis Chalmers model 83 Snap Coupler plow and taking it to a local plow day.
Пікірлер: 38
@markward60767 ай бұрын
The Alice is a cut above the rest. It utilizes its power very smoothly. And looks comfortable.
@franklinbrown84177 ай бұрын
Allis-Chalmers built great tractors and equipment. Decades ago I bought an old A-C “C” for a mowing tractor. Loved it.
@americanharleyrider84 ай бұрын
@@franklinbrown8417I still have my 1948 Allis Chalmers C.
@jimbeam16437 ай бұрын
You probably hear this a lot but I was raised on a small farm and we had a John Deere B and and a WD-45. Dad put a 3 point conversion on the Alice so it was more versatile and a wide front end. I spent many a day on those tractors. Good to hear them out there pulling hard. Keep up the great content.
@Jason1Pa8 ай бұрын
Great set up!!😮
@1DirtyMutt6 ай бұрын
We had a WD and a 2 bottom AC plow growing up. We always had to add weight to the back end of the plow to keep it in the ground.
@RJ1999xАй бұрын
Wasn't set
@markward60767 ай бұрын
You are a very interesting person too watch
@brianwatson60028 ай бұрын
Excellent tutorial. I will suggest running over the mold boards with an 120 grit sanding disc to cut through the rust layer. Follow up with the wire brush cup and she’ll scour right away. Set your rolling coulters about 2” to the left of the landside and you’ll get a nice clean furrow
@Randys_Relics8 ай бұрын
I was surprised how quickly they shined up! Luckily the last guy painted them before they rusted.
@garrykraemer8993Ай бұрын
The most important thing you need to do is grease the plows snap coupler eye. My dad kept his clean and greased all the time. He was an AC mechanic a long time ago! Make sure you grease the clutch throw out bearing once in a while. That WD45 will out last you!
@Randys_RelicsАй бұрын
Interesting, I've never run across a snap coupler eye that had been greased. I would think it would catch the sand around here and make an abrasive goo. I appreciate comment, thanks for watching!
@americanharleyrider84 ай бұрын
Awesome video.
@christophermyers2655 ай бұрын
I really like the seat idea.
@Randys_Relics5 ай бұрын
Thanks!
@scottbuss34492 ай бұрын
very nice !!!!!!!!
@robertyork75608 ай бұрын
Awesome
@donvoll25808 ай бұрын
Good day from Ontario. Boy nice looking unit. Never new allis ploughs had trip bottoms. Also good tires on back of tractor Interesting seeing JD pulling ??? tractor with a trailer & then plough Thanks What did plough shares cost. last one I heard price on 42/share
@Randys_Relics8 ай бұрын
The Twin City didn't have enough traction to pull the plow and party wagon. So the Deere helped them finish out the pass. Haha I had about $60 per share after shipping and hardware. Thanks for watching!
@user-wx1qm2ib1l8 ай бұрын
Hi there Randy ,where was the plow day at?
@Randys_Relics8 ай бұрын
This would have been near the town of McClure, Ohio.
@juliawinberry4555 ай бұрын
Once you get your right rear tire in a furrow your plow must be level across the beams and along the beams. The dirt should roll out level and your furrow should have a smooth edge. Your Allis looks sharp and sounds good. Ed in N.E. Arkansas
@MikeJensen-wo7oh5 ай бұрын
I'm a little late to this party, great video! Some of my favorite content, A WD 45 and SC plow! Where did you get the new shares?
@Randys_Relics5 ай бұрын
Dave Sousa 612-619-4399 for Allis Plow parts.
@user-vt1ne7hw1u7 ай бұрын
Where did you get the new points for the plow? Also what’s the suitcase weights you are running, probably the best set up I’ve seen for suitcases on a Wd 45
@Randys_Relics7 ай бұрын
Dave The Plowman 612-619-4399 for the points. I think they are weights off a compact Ford tractor. I pulled them off an aircraft tug I had. I built the bracket myself.
@user-vt1ne7hw1u7 ай бұрын
How much do the suitcases weigh? A piece looking into doing this myself now
@Randys_Relics7 ай бұрын
@@user-vt1ne7hw1u 45-50lbs each.
@RJ1999xАй бұрын
If you added the weights because it looks nice, great work, of you added the weights to hold the front down while plowing, you don't have the traction booster working
@davidkimmel42163 ай бұрын
Nice
@robertyork75608 ай бұрын
I want the tractor
@Randys_Relics8 ай бұрын
It's a good machine!
@richarddeckard61048 ай бұрын
Did you put the wide seat on? Is that in a Video?
@Randys_Relics8 ай бұрын
Yes, I put the seat on. I didn't do a video specifically on it but there is one with some close-up video of it. It's called New Tractor and Some Plowing.
@roadrunner35636 ай бұрын
Traction booster adjustments?
@user-bl8bd3no3i7 ай бұрын
😂 UBER KOOL ,I'D USE PB BLASTER ON EVERYTHING SINCE 1956 ..😅
@user-io1jy8ec7d10 күн бұрын
I was always told it took 20 hp per bottom. I dont
@Randys_Relics9 күн бұрын
This figure's out to 15 horsepower for bottom. Set to 14 in wide cuts.