How To Get The PERFECT Miter Angle On Baseboard EVERY TIME! Tool Every DIYer NEEDS!

[@lin-oi4ej]

I am about to do this in hallway, love how easy you make it. Gonna go buy the tool asap before project . Thank you

[@FixThisHouse]

I’m glad I could be of help! 🙏🏽😊

[@lzs19860610]

Great video

[@ryannewton1511]

@@lzs19860610 l

[@thegourmetgolfer5544]

A pro tip I learned years ago, if you add +0.5-+1 degree to your outside cuts and -0.5-1on inside cuts, this will allow the points to meet first and with some pressure, they'll flex into a perfectly flush fit. You will also want to calibrate your mitre saw's mitre gauge using that protractor as your reference since most saws aren't perfectly calibrated/square either. Always best to stick to one measuring tool unless you're dealing with precision instruments

[@matthewstrange3778]

That's ok with timber, MDF is a completely different story 😜

[@cfriskme]

By far the best video on KZbin in regard to installing base boards and using the best tools of the trade accurately to get the job done right.

[@andrewhess9425]

Quick little pro tip for ya. I like what I see just if you are using the saw for a lot of cuts try to not flip the baseboard to the back side. Doing this can chip out the outter spot of the baseboard. Instead flip it upside down.

[@206Nish]

My miter only goes to 45, how am I supposed to do the cuts when the tool says 49?

[@Grunttamer]

@@206Nish what i would do is cut a piece of wood to like 10 then put that against the fence and then put the board against that and cut it at 39 indicated. if you put the piece in the right spot on the fence you should have your angle.

[@206Nish]

@@Grunttamer thanks, I just watched a video where a guy does exactly that

[@FreePal23]

⁠@@206Nishcan your the link please

[@ricksanz6647]

Ez breeze explanation! wow simple. I've watched tons of videos and nobody nailed it like you did. THANKX!

[@FixThisHouse]

Thank you so much Rick! Means a lot! 🙏🏽😊

[@hamidullaha.saahir9144]

This is beautiful the way you use that tool to get an accurate inside and outside cut, and thanks for demonstrating and sharing how to use this tool.

[@FixThisHouse]

Thank you so much for the feedback! 🙏🏽😊

[@thefilipinapee]

Excellent video! You put instructions In laymen terms, easy to understand with excellent results. Cheers.

[@FixThisHouse]

Thank you Jonathan for the feedback! Means a lot! 🙏🏽😊👍🏽

[@csimet]

Good tips. My added tip... make sure your miter saw is adjusted and working properly before you rely on the angle scale & detents, as well as cutting perfect 90 degrees horizontal & vertical when returned to its "home" position. It will and does get knocked out of position, especially portable saws.

[@debiparsons1996]

Slick I need to make a cornice for a sliding glass door and this looks like the tool to use. You sure made it look easy. Thanks

[@dilberkeles9388]

One of the best videos I've ever watched. Very practical, good explanation. Thanks.

[@williamstanley9722]

Amazing! I wish I watched your video before I struggled with molding miter cuts, got disgusted and started caulking the open seams! I’m getting this tool!

[@johnlennon1049]

I like the storage shelves you had behind you in the garage at the end.

[@davedeatherage4902]

Thanks, this makes it easier for a beginner Diy'er like myself.👍🇺🇸🙏👌

[@sj-xb4yz]

best video on this product.. you show how we all assume 90' and how off they are... then try to tweak and waste boards. great vid on how to use!

[@enney1358]

This was a great explanation…I am putting in new baseboards and will follow this.

[@eddierobles2137]

Great tutorial. Thank you so much 👍👍

[@FixThisHouse]

Thank you for watching! 🙏🏽😊

[@topdog417]

You are the bomb my friend! Easy to follow instructions. Crystal clear. You make it so easy

[@paovang1548]

Dude, thank you for showing this tool. I bought one and it save me a lot of guessing. Thanks again man

[@FixThisHouse]

I’m glad I could be of help Pao! 🙏🏽😊

[@rui4952]

I am doing my baseboards for the first time this summer and this tool will help greatly! thank you!

[@lisas9462]

I think you are perhaps the best DIY'ER that I have come across. Your demonstrations and explanations are clear and concise (ideal). Than you!

[@FixThisHouse]

Thank you so much! Really means alot! 🙏🏽😭

[@rodgoddard5113]

Great video, very helpful

[@arenee621]

The carpenter God put your video in my feed 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾!

[@LouLah-iy9rz]

Awesome instructions! Thank you... Now, I'm ready to install my baseboards.

[@nayemhossain4283]

My friend this is good job you did .

[@AnthonyBaker1]

Fantastic video. Thanks for posting.

[@FixThisHouse]

Thank you too!

[@FurFeathersandFlowers]

Just finished a project and needed this tool. Thank you for the excellent video(s) as it is most helpful.

[@yourcanadianscotsauntynanc9946]

I just shared on my fb, post too , I read about that miter protractor it’s got great reviews and high quality aluminum with engraved writings so they stay on to read. Thanks for this great detailed video on moulding

[@nikmut7143]

Yeah, I always overlook that particular scale. It does make it easier.

[@xaviier_77]

Thanks man for making this video I just came across your page, as I'm 1st year Carpenter apprentice in high rise and its been a challenge with these miter cuts, I will look into the tools that you mentioned. Have a great one!

[@KatharinaGarcia-nm9vg]

Thanks, this has been of great assistance

[@davidmingee4286]

Thanks .. looks easy with the right tool

[@margaretlewis75]

This video was perfect for me where have you been Thank you so much ❤❤❤❤

[@FixThisHouse]

I’m glad I could be of help Margaret! 🙏🏽😊

[@shellyclarke5337]

Ty! Just learning!

[@FixThisHouse]

I’m glad I could be of help! 🙏🏽😊

[@sophakamasomdaka3066]

Thank you for explaining very well

[@perrydadrass389]

This is a grate product and makes your job alot easier, I truly appreciate your videos they are great and very helpful,thank you so much you are a excellent teacher.

[@richlrn64]

Excellent video. Very helpful.

[@23youwatch]

Excellent video

[@scardera]

Got the lexivon one, really great for any angle measurement work.

[@robertoperez9892]

Exellent thank you.from florida.

[@FixThisHouse]

You are very welcome Roberto! It was my pleasure to help! 🙏🏽😊

[@MrSamrobz]

Awesome way of doing mitres although I always scribe my internal mitres.

[@LifeWithMatthew]

Found this video while trying to figure out how to cut an aluminum channel for some LED strips, this is exactly the tool I need for an weird angle I have in a room!

[@justkeepingitreal2024]

I need to install over 400 linear feet of 5½" square baseboards. Finish carpenters are quoting $70-$80 per hour to install. I've installed baseboards before but the miter cuts have always caused me trouble. Now I see why. Thanks for the video tips fo this DIYer!

[@robertmetz5949]

Never pay by the hour. Negotiate a price for the job. Pay when contractor is finished.

[@javiervega7395]

Nice video 👍👌. Now I’m gonna try do it my self

[@FixThisHouse]

Thank you! 🙏🏽😊

[@sandypeters2017]

LOVE THIS!! Getting ready to do a house myself and all your tips are awesome!!! TY

[@FixThisHouse]

Thank you so much!

[@FixThisHouse]

Hello Mr. Peters! Great news you have won this videos Giveaway! The other subscriber did not respond so you are next in line to be the winner! Congrats! Please email me to claim your product! Here is my email : [e-mail] . You have 3 days to claim 👍🏽😊

[@sandypeters2017]

@@FixThisHouse sent you an email 😁

[@binkywarren21]

Aha! So that's how it works. The miter angle on that tool is used any time two pieces are joined together. I like that it's made out of aluminum rather than breakable plastic.

[@brianjo789]

Thanks. I love your clear tips to make DIY easier for us.

[@FixThisHouse]

Thank you so much! 🙏🏽😊

[@privatename3621]

Good stuff. Thanks for this video.

[@FixThisHouse]

It was my pleasure! 🙏🏽😊

[@jeffthewhiff]

Looks great and I love the Saker miter gauge too as it would make cutting miters so much easier!👍

[@georgerose1315]

Dude, you're awesome! And I'm a handyman.

[@FixThisHouse]

Thank you so much George! 🙏🏽😊

[@dadduorp]

I have a Hitachi C10FSHC 10" and I'm trying to miter cut 5.5" wide boards...but the boards don't fit in the upright placement (flat against the fence) that you're cutting yours. On top of that, the saw maxes out at 45 degrees when tilted. Great video, tho. I looked at many others and yours was straight to the point! Thnx!

[@kimwhite2553]

Great video!! Thanks so much.

[@FixThisHouse]

Thank you for watching! 🙏🏽😊

[@MrGoodCompany]

Awesome tool. Thanks for showcasing it.

[@Indopridechicken]

Your so awesome thanks for showing us this video

[@FixThisHouse]

Thank you for the love and support! 🙏🏽😊

[@andycavalier1920]

Thanks for the great video.

[@FixThisHouse]

Thank you for the love and support! 🙏🏽😊

[@carlos-kx4sn]

Awesome video. Thank you for your time spend on explaining this awesome tool

[@mrsrosie2569]

Awesome video, easy to understand, clear and to the point.

[@thetwinsfamily1729]

Thank you very much new subscriber

[@CookieSlinger]

This product is awesome! So many tools, such few money xD Thanks for the presentation again!

[@FixThisHouse]

Thank you brotha! Don’t worry I’ll be doing more giveaways! 🙏🏽😊👍🏽

[@CookieSlinger]

@@FixThisHouse You're helping a lot of people with these giveaways. Great idea and much respect to you bro!

[@robey60]

Thank you, Sir, for the lesson!!

[@isaacibarra680]

Thank you so much for the video this really helped me a lot I like the way you explain everything I never have a question after I watch one of your videos awesome work brother thanks

[@FixThisHouse]

Thank you so much for the love and support! Your feedback just made my day! 🙏🏽😊

[@timlenz8275]

Excellent video! Extremely helpful!

[@FixThisHouse]

Thank you for watching! 🙏🏽😊

[@debimahoney4520]

Yep, I was doing 45°, after 4 tries I gave up and resorted to You Tube; thank you, really helpful video! 👍

[@Nic17639]

Awesome review man

[@marlontorressanic6716]

I just suscribe really really you explain very well tankyou so much

[@FixThisHouse]

Thank you so much! Means a lot!

[@Bill-j2g]

I sudb because of this one video alone thank you

[@QBlackDeathQ]

Nice video strait to the point.

[@FixThisHouse]

Thank you so much! 🙏🏽😊

[@justbroome]

Great video as always 👍🏽Would love to see a video on different types of CA glues and when to use which types. Keep up the great content.

[@FixThisHouse]

Thank you so much! You fave me another video idea! Thank you! I’ll do one soon! 👍🏽🙏🏽😊

[@jackieweatherspoon7371]

This guy is awesome

[@FixThisHouse]

Thank you Jackie! 🙏🏽😊

[@Kathleen253]

Great tip thanks 👍

[@FixThisHouse]

Thank you! 🙏🏽😊

[@stephenjordan8712]

Great video. 🙌🏻

[@paulsiu2113]

So good thanks

[@FixThisHouse]

Thank you!

[@SivaFolsom]

You are an amazing teacher! Keep it coming...

[@robertrouser]

Great job brother!!! 💪👍🙂

[@paulbasantes2992]

Thanks for the video!

[@VijayKumarcarpeter]

Thank you very usefull tools

[@Pokecana]

Great video man!

[@Pr81039]

Nice video as always

[@FixThisHouse]

Thank you 🙏🏽!

[@Lillieallsmiles]

Awesome job btw! Do you have a video showing how to cut larger baseboards 5 1/2 boards. I have a non sliding miter saw

[@billybop17]

great job

[@FixThisHouse]

Thank you! 🙏🏽😊

[@biss145]

He is a good teachers unlike those who come with 30 experience and long talks in the end do not say nothing. 👍

[@FixThisHouse]

Thank you so much for the love and support! 🙏🏽😊

[@zach872]

Extremely helpful!

[@jaymomo7462]

Yup like a glove!

[@ZER0o10]

Great video as usual!ty

[@FixThisHouse]

Thank you 🙏🏽!

[@Fullmoonrisingtarot]

You’re the best!!!

[@FixThisHouse]

Thank you so much for the love and support! 🙏🏽😊

[@thomasnappo6309]

Well done

[@ITBubba1]

Just a side note on cutting odd angels. Those that don't have a detent that locks it in place , like the 45 degree notch. Found out the hard way, on any settings like the 47 he's doing. Lock the handle down or the saw can move back to the detent. !

[@cesarflores9813]

Thank you

[@nicklucente1402]

Great Channel thanks for all the great tips👍👍

[@Celzot]

Perfect!

[@robofurious]

I own this tool! Makes me look like I know what I’m doing haha

[@markkleckner3060]

Thanks that was awesome info, God Bless!

[@ronm6585]

Thanks.

[@corpralsam]

Good job! You made it easy to learn. I can't wait to try it out

[@FixThisHouse]

Thank you! It’s super easy and you’ll be making those miter cuts like a pro in no time! 👍🏽😊

[@stephend100]

You're the best.

[@SIAFU]

Great video, great tool ...

[@lizodell2830]

Awesome!

[@FixThisHouse]

Thank you 🙏🏽

[@GiovanniMattucci]

Would have liked you to show the whole process, as in measuring for an inside and outside edge. Do you account a bit more beyond the corner for outside edges?

[@titeo281]

How do you measuring & cut rounded corner? (both inside & outside rounded corners). Thank you

[@FixThisHouse]

That’s a great question! Stay tuned I’ll make a video on this my friend 🙏🏽😊

[@Adon77]

Awesome 😎

[@FixThisHouse]

Thank you 🙏🏽!

[@miguelperez5599]

Awesome.